How to access Sybase IQ data from SAP BW
Hi,
I read from Sybase website that we can access Sybase IQ data from SAP BW using Remote Cube through JDBC driver.
Is there any documentation on how to configure that?
Thanks in advance for your help.
Our BW version is 7.01
Sybase IQ is 15.4
Thanks,
CH
Hi,
The two files that are created are one is Control File ( will save as filename_s ) and other is data file. The control file will give you the details of your fields in your Infospoke
regards
Srini
Message was edited by:
Srinivas
Similar Messages
-
How to access internal table data from webdynpro to Flex application.
Hi Connoisseur
The data transfer from Abap WebDeypro to flex island works well. I followed , there is an example from Thomas Jung (by the way as always Great Work) and Karthikeyan Venkatesan (Infosys) but this example covers simple type only.
There is no example with complex types like arrayCollection which handle the transfer of data from flex to WebDynpro.
i tried to do pass internal table value to flex-datagrid.but its not work.
i would like to know
1.how to access internal table data from webdynpro to Flex application.
2.how to pass the internal table to flex-datagrid.
2.how to pass dynamically in ADOBE flex.
3. how to do Flex is receiving the wd context data?
4. how can we update WD context with FLEX data.
Ple give me sample example and step by step procedure.
Regards
laxmikanthHi Laxmikanth,
Please refer this...
Flash island: update complex type from flex
Cheers..
kris. -
How we will pull the data from Sap-Bi to sap-Bpc
Dear Experts,
Thanks for watching this thread.The whole data is available in SAP-BI.
My system environment is SAP-BPC MS7.5.
Now i want to load the data from Sap-Bi to Sap-Bpc ms.For that we need any Interfaces.
How we will pull the data from SAP-BI to BPC-MS for Master data and Transaction Data.
could you please provide me step by step guide.
Please guide me what should i do.
Regards,
Srinivasan.
Edited by: srinivasan.singari on Jul 22, 2011 8:20 AMTough Ask..
Because i have done dashboarding thru scritping (Dyanamic fashion tough) ..It is very good ..But when, coming to the one you asked i have the idea how it works but cannot really tell you wich would be better.
Each Route has its own limitations.That really depends on what exaclty your client is looking after..
So if you new to xcelsius and eager to learn ..I suggest you to give a go at all those..May be you can let me know wich is the best one..
1. QAWS,
2. Bex Query --> Crystal Reports --> Live office --> DashBoard.
3. Bex Query --> WebI --> Live Office --> Dashboard..
4. Webservices consuming BI Query,
5. Xcelsius SAP Netwever Connector.
But i suggest as of now use Xcelsius SAP netweaver Connnection... -
HOW to update real time data from sap to other application?
We have two option of passing data from sap to other system.
1. web service
2. through idoc.
can anyone tell me advantages & disadv. of these two options.
Which scenario shd we use web service & idoc.
How is idoc triggerred.?
Is it only through user exit?
Kindly suggest any other ways for interacting with a 3rd party system which does not use a file.Dear Libin,
IF you are using sap sytem as a sender then its better to use idoc's. Actually both systems (idoc and webservice) have there own advantages and disadvantages. Look up sdn for more info.
My personal choice would be idoc since with webservices you would need special tools like xml spy or altova and the skill to analyze and run those tools.,, its a little tedious..
Rgds
joel -
How to access listbox binding data from a button which is not part of listbox in xaml page
Hi
I have the below listbox and its bdining as below
<ListBox x:Name="listMyPosts" ItemsSource="{Binding Path=MyPostsDataSource}" Grid.Row="0" >
<ListBox.ItemTemplate >
<DataTemplate >
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding
NewPostText ,Mode=TwoWay}"/>
<TextBlock Text="{Binding
NewPostSender}"/>
</StackPanel>
</DataTemplate>
</ListBox.ItemTemplate>
<Button content="Send Post" command ="Binding SendClickCommand} />
</ListBox>
And i am assining postsViewmodel
private PostsViewModel _PostsViewModel ;
public Conversation()
InitializeComponent();
_PostsViewModel = new PostsViewModel ();
this.DataContext = _PostsViewModel ;
public ObservableCollection<PostsModel> MyPostsDataSource
get
if (_MyPostsDataSource== null)
_MyPostsDataSource= GetMyPosts();
return _MyPostsDataSource;
set
this._MyPostsDataSource = value;
RaisePropertyChanged("MyPostsDataSource");
is that possible to access listbox binding data from the ViewModel's SendClickCommand property ?
KrrishnaIf you need to pass to the command selected item, try this
<Button Сontent="Send Post"
Сommand ="{Binding SendClickCommand}"
CommandParameter={Binding ElementName=listMyPosts,
Path=SelectedItem}/>
msdn -
How to send vendor IDOC data from SAP R/3 to XI.
Hi experts,
I have developed the IDOC to FILE scenario for Vendor Master Upload. I want to place flat file in local folder with in XI or Outside of XI. (Using NFS or FTP protocol in FILE adapter). My First quesstion is How to setup Folder with in XI ro Out side XI?
And also I want to push the IDOC from SAP r/3 to test the scenario. Both XI and R/3 systems are configured to exchange data.
How to Push Vendor IDOC from SAP R/3 to XI? (we can send XML directly to XI; but the R/3 kernal should be moe than 6.20).
Thanks in Advance.....Hi,
>>My First quesstion is How to setup Folder with in XI ro Out side XI?
Its a normal way to creation of folders in Os level . u can create the folder in XI Server or on the FTP Server.
ALE Settings
Steps
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
IDoc-XI-File scenario
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Posting the IDOC from R/3 to XI
/people/sameer.shadab/blog/2005/07/25/reposting-idocs-instead-of-recreating--for-testing-purpose-xi
REgards
Seshagiri -
How to access Previous Records' Data from within a Query?
Hi All,
I am making a report in which I need to compare my "Registration Start Date" with "Registration End Date" of previous registration of same customer. This is to check if there are gaps between any customer's registrations.
In scenario shown below, I want to filter out RegID '1' as it comes after a gap from previous registration(RegID '3') of the same customer.
RegID CustID Registration Start Registration End
1 1 01/04/2005 07/04/2005
2 2 01/03/2005 29/05/2005
3 1 21/03/2005 29/03/2005
4 1 01/03/2005 21/04/2005
I created the join of this table with itself to pick previous records. it is something like:
Current_Rec.Cust ID = Prev_Rec.CustID AND
Current_Rec.RegStart > Prev_Rec.RegEnd
But this gives wrong data if customer has 3 back-to-back registrations. i.e. Shows last registration in query results as their is a gap between 3rd and 1st registration. But ofcourse there was another record between these two(which was 2nd registration).
It would be so nice of you guys if you can suggest a solution to this. Any oracle function?
Thanks & Regards,
AhsanI Assume the following is your sample data
Table Name: Tab1
RegID CustID Registration_Start Registration_End
1 1 01/04/2005 07/04/2005
2 2 01/03/2005 29/05/2005
3 1 21/03/2005 29/03/2005
4 1 01/03/2005 21/03/2005
Note : For the Regid "4" I have changed the Registration_End to 21/03/2005. It was earlier 21/04/2005.
Coming to the query, you need to generate the list of regid that have gaps.
Try the following query:
SELECT c.*
FROM tab1 c
WHERE c.reg_id NOT IN (
SELECT a.reg_id
FROM tab1 a, tab1 b
WHERE a.cust_id = b.cust_id
AND a.registration_end = b.registration_start
Note: I am sorry I didn't have access to the data base to execute my query. Correct me if I am wrong.
Regards,
Somu -
Accessing Lotus Notes data from SAP
We need to fetch some user data such as their email address from a Lotus Notes database using the user's phone extension as a key. This could be from a BOR method used in a workflow or from an FM.
Is this possible, feasible, advisable? If so, what does it take?
Any help or ideas from experts on this forum will be greatly appreciated.
Thanks ... JameelHi Murthy,
Given link below has a ADOBE DOCUMENT that has the detailed information on how to use i-views for accessing outlook calendar from within SAP :
http://help.sap.com/bp_epv260/EP_JA/documentation/How-to_Guides/KM/Create%20iViews%20to%20Access%20MS%20Exchange%20Data.pdf
<b>Kindly reward points if you found the reply helpful.<b>
Cheers,
Chaitanya. -
How to Access External PostgreSQL Database from SAP On Linux?
Hi all!
I have Linux-Orale11-ERP6.0. I need connect to an external database PostgreSQL on Linux. I installed the driver ODBC on Linux-Oracle11-ERP6.0 and command isql-v<alias> connect to PostgreSQL:
root@sap etc# isql -v <alias>
Connected!
sql-statement
help tablename
quit
SQL>
How do I now configure the Oracle DB Link?I installed DG4ODBS.
Configured initH2P.ora, listener.ora and tnsnames.ora.
/oracle/DEV/112_64/hs/admin/initH2P.ora:
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = H2P
HS_FDS_TRACE_LEVEL = OFF
#HS_FDS_SHAREABLE_NAME = /usr/pgsql-9.0/lib/psqlodbc.so
# ODBC specific environment variables
#set ODBCINI=/etc/odbc.ini
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
/oracle/DEV/112_64/network/admin/listener.ora
# Filename......: listener.ora
# Created.......: created by SAP AG, R/3 Rel. >= 6.10
# Name..........:
# Date..........:
# @(#) $Id: //bc/701-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#1 $
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = DEV.WORLD)
(ADDRESS=
(PROTOCOL = IPC)
(KEY = DEV)
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = sap-dev)
(PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = SUPPORT
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = DEV)
(ORACLE_HOME = /oracle/DEV/112_64)
#########I inserted###########
(SID_DESC =
(SID_NAME = H2P)
(ORACLE_HOME = /oracle/DEV/112_64)
(PROGRAM=dg4odbc)
/oracle/DEV/112_64/network/admin/tnsnames.ora
# Filename......: tnsnames.ora
# Created.......: created by SAP AG, R/3 Rel. >= 6.10
# Name..........:
# Date..........:
# @(#) $Id: //bc/701-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#1 $
DEV.WORLD=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = sap-dev)
(PORT = 1527)
(CONNECT_DATA =
(SID = DEV)
(GLOBAL_NAME = DEV.WORLD)
#########I inserted###########
H2P.WORLD =
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=tcp)
(HOST=77.120.107.XXX)
(PORT=5432)
(CONNECT_DATA=(SID=H2P))
(HS=OK)
And when I run: tnsping H2P, I get an error:
[root@sap admin]# tnsping H2P
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 29-AUG-2011 15:37:00
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
/usr/sap/DEV/SYS/profile/oracle/sqlnet.ora
TNS-03505: Failed to resolve name
Although:
[root@sap admin]# tnsping DEV
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 29-AUG-2011 16:38:07
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
/usr/sap/DEV/SYS/profile/oracle/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = sap-dev) (PORT = 1527))) (CONNECT_DATA = (SID = DEV) (GLOBAL_NAME = DEV.WORLD)))
OK (10 msec)
what am I doing wrong? -
How can I archive some data from SAP, what is the procedure to do it and the TCodes. Whether I can take archive and copy the data into the CDs, when it is require how can I provide the data into the system, total procedure and the solution. Please guide me so that I can archive some data from our server. Thanks & Regards, Kuntal Guha Roy
SAP provide standard pre-defined SARA object of most (90%) of all the IS-U data objects. So depending on the functionality that you are currently using, you probably will not have to create any new objects. Things to remember in Archiving around IS-U is that due to the high integration of data thought out the IS-U vertical you will need to pick a date in time that you want to archive back from. Then you can work with the Functional Team to determine what the order of the objects you want to archive. There are MANY dependancies in the IS-U data model, so you will need to be careful that you don't archive/delete items in the wrong order. I (Technical Architect / Basis) have all ways had the Functional Teams provide the list of object and the order to archive/delete them. But rule thume is, last data in, first data out. So you would need to archive Invoicing docs, before Billing, Billing before payments and meeter reads.
Hope it helps.
Thanks
Matt -
How to Access data from SAP Content Server through SAP Portal
Hi Experts,
I want to aceess the data from SAP Content server through portal. Currently I am working on LSO business package. The SAP content server should work like Webdav as we uses KM as webdav.
I am trying to use this URL into the CMS address but it is not working
http://XXX-XXX-XXXX:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
Is there any other procedure for acceesing the DATA from SAP content server. ?
Thanks,
AhmadIf your Content Server is being used by DMS, then you can use the DMS Connector for KM. This connector allows all documents stored in DMS to be accessed in Portal as if they are stored in KM. For more info see this:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/d289b446076bb2e10000000a1553f6/frameset.htm
Andrew -
How can i store the data from the list to MS-Access?
Hi all,
We all know that from alv it is possible to export data to Ms-excel or word or text file. Can anyone tell me how can i store the data from alv or reports to Ms-Access?
Thanks in Advance,
AbhijitHi,
If you want that without code, i suppose there is a option in MS-Access to import data from Excel, so you have to first export to excel and then import to Access.
If you want to code it yourself then have a look at FM TABLE_EXPORT_TO_MSACCESS, as said in Exporting Data from R/3 to MS ACCESS
You can also see the search results in SCN for [export data to MS-Access (45 Results)|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=exportdatato+MS-Access&cat=sdn_all].
Regards
Karthik D -
How to retrieve the data from SAP database.
Hi Pals,
How to retrieve data from SAP R/3 System to my third party software. I will make my query little bit more clear. There is a list of assets entered and stored in the SAP system. For example 3 mobile phones.
1) Mobile 1- Nokia
2) Mobile 2 - Samsung
3) Mobile 3 u2013 Sony
Now think I do not know what all assets is there. I have to retrieve the data and get it on my third party software. Just display the list of assets. Lets say SAP XI is also there. Now how will I map it and get the details.
Please give me step by step method.
N.B: Just to read the data from SAP database.
Please make the flow clear step by step.
Thanking you
AKHi,
You can use RFC or ABAP Proxy to make synchronous call with SAP.
Under RFC or ABAP Proxy Program you can get the data from SAP tables. Direct access to SAP Database is not preferrable even if its possible.
The better way to go for RFC or PROXY.
You will send the request from Third party system and the it will be as input parameters from RFC/ Proxy it will response based on it.
This got it all..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
HTTP to RFC - A Starter Kit
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
Refer
Thanks
Swarup
Edited by: Swarup Sawant on Jun 4, 2008 9:32 AM -
How to Extract Data from SAP and Load it into Essbase
Hi All,
Can you recommend some ways to extract data from SAP and load it into Essbase?. I have no knowledge about SAP, not sure how I can perform this task. Can I use ODI for this job?
Thankshi,
Not sure if this helps but give a try
you can create connection from EAS to SAP .. using a plug-in .. if you have access to oracle Support go for [ID 968961.1]
or
below are steps
1. In EASPATH\console, open components.xml in a text editor.
2. Under <PluginList>, enter <Plugin archiveName="SAP" packageName="com.essbase.eas.sap.ui"/> before the closing </PlugIn> tag.
3. Save and close the file.
4. In EASPATH\console\bin, open admincon.lax in a text editor.
5. Search for lax.class.path= and append ;..\lib\sap_client.jar;..\lib \sap_common.jar to the entry. Save and close the file.
6. In EASPATH\server\bin, open adminsvr.lax in a text editor.
7. Search for lax.nl.java.option.additional, and append -DRFC_INI=EASPATH\server\saprfc.ini. Save and close the file.
8. Create a new environment variable, RFC_INI, with a value of EASPATH\server\saprfc.ini
9. Copy librfc.dll andsapjcorfc.dll to EASPATH\server\bin. You may need to obtain these files from SAP.
let me know if it works :) -
Access to EHS data from system outside of SAP
We are creating a Formulation tool in a SQL database with a Access front end which will need to use EHS Specification data and eventually push the Formulation data back into the SAP EHS Spec database.
I would like this new database to have Real-Time access to SAP data. We currently are using RFC connections with tools such as EASY-Expert and a external Rules based program Atrion as well, so I know it is possible to feed this data back and forth using XML files.
Any advice on how I should proceed and maybe some external tools for purchase that will help me do this.Hi Beverly,
it is possible to access EH&S data from outside SAP by using the standard SAP BAPIs (e.g. BAPI_BUS1077_GETDETAIL for reading EH&S data) which are RFC enabled. Another possibility would be to develop your own RFC enabled function modules in the SAP system and call them from outside.
From your access database you can use VBA to perform the RFC call.
Best regards,
Andreas
Maybe you are looking for
-
Dynamic Region: what am I doing wrong?
Jdev. 11.1.2.3.0 I have been having problems with dynamic regions. I have two adf forms; mainPage.jsf and mainRegion.jsf. I have also two adf forms (page fragments), employee.jsff and department.jsff, I have also two bounded task flows; employee-task
-
Is it possible to be invoiced by Adove instead of signing up(subscribing) for Adobe FormsCentral with a credit card?
-
Help! iPod won't turn on.
My new iPod said that my battery was low so I turned it off and now I can't turn it on. I have connected it to my computer to charge but nothing has happened. I have tried reseting it but that has done nothing.
-
Is final cut pro 6 compatible with snow leopard?
Is final cut pro 6 compatible with snow leopard? I don't want to upgrade the OS if I lose FCP.
-
[BUG] - 2x "Purchased on My Name's iPhone" sections ?!
I just synced my iPhone 4 to my MBP laptop's (10.6.5) iTunes app (10.1.1), and suddenly get TWO "*Purchased on My Name's iPhone*" sections under the "Store" heading in the margin of iTunes?! So now half my iPhone purchases are under one section, with