How to access the MS access database through network

Hi friends,
I want to read,write and some database functions through network.I hope it is possible.
Steps i followed for network access
1. I created a database named magal using  DB.create_mdb_link.vi in local pc 1.
2. I used DB Tools open connection.vi from connectivity-database toolkit vis to open connection of magal database
    from local pc 2
Its throwing error   
I attached the vis
kavi
Attachments:
vi 1.vi ‏8 KB
vi 1.vi ‏8 KB
DATABASE IN LOCAL PC 1.docx ‏139 KB

Hello,
From the description mentioned, I understand you created a UDL file for your database file. There are mainly three ways in which you can create one. Please refer to the link and check if you used either of this methods only or not:
http://digital.ni.com/public.nsf/websearch/1D5EB4DCBD13106486256B9D005E11B0?OpenDocument
Secondly Can I know what is the end application you want to do? Do you want to query data or you want to insert Data into your database based on that I can recommend you to make further changes in your code.
Also you mentioned you were getting a particular error can you please post that as well so that I can help you in a better way.
Thank You.

Similar Messages

  • How to access the ms access database in the JApplet?

    I am New here.
    Please help me.
    I am create one java file to access MS access the database in the JApplet.
    It say "Access denied".
    How to access the ms access database in the JApplet?
    Message was edited by:
    SVPRM

    Hi,
    First of all, were u successfull in creating the connection with the .mdb file.Like settting the DSN and configuring the .mdb file path in control panel.
    If yes then one option might be that the file ur trying to access is in Read-only mode.
    regards

  • How to display the data from database(MS access) to a textbox

    anyone know ?

    how to display the data from database(MS access) to a
    textboxThe reply hasn't changed over these years. Read the tuutorial on how to fetch the data. You can display it anywhere you feel like. :)
    http://java.sun.com/docs/books/tutorial/jdbc/

  • Configure Synchronization Connections An error has occurred while accessing the SQL Server database

    Hi,
    i am getting following error message
    Central Administration --> Synchronization Connections
    An error has occurred while accessing the SQL Server database or the SharePoint Server Search service.
    If this is the first time you have seen this message, try again later. If this problem persists, contact your administrator.
    Central Administration -->  Manage Profile Service: User Profile Service Application --> Manage User Properties
    Error
    An unexpected error has occurred.
    Troubleshoot issues with Microsoft SharePoint Foundation.
    Correlation ID: 3bce5a11-f2dc-4788
    Please tell how to fix it.
    iffi

    Event ID 5555 -> i have change the Timer jobs recycling time AM to PM
    for  User profile page not display  number of count in the page first check services , connection , 
    IISRESET /NOFORCE   /  timer services restart 
    Deepesh Yevle MCTS

  • How to restrict the change access in CRM for OLTP orders

    Hi Guru's,
    Please let me know  how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
    We have  the orders that are  created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM  system is allowing change mode for ECC orders and ending up with errors.
    Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
    Regards
    Suneel

    Hi.
    You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
    Regards.

  • How to configure the wifi access with specific time slot for kids?

    how to configure the wifi access with specific time slot for kids?

    Which model of AirPort base station do you have? Which version of OS X is your MacBook Pro running?
    Wi-Fi access can be limited using the Timed Access feature of the AirPort routers. You would do so using the AirPort Utility.

  • How we can create Oracle 9i Database through Commands.

    How we can create Oracle 9i Database through Commands.
    We need step by step process and all the scripts.

    CREATE DATABASE
    Caution:
    This statement prepares a database for initial use and erases any data currently in the specified files. Use this statement only when you understand its ramifications.
    Note Regarding Security Enhancements:
    In this release of Oracle and in subsequent releases, several enhancements are being made to ensure the security of default database user accounts.
    To provide guidance for configuring Oracle9i in a secure manner, Oracle Corporation provides a security checklist. Oracle Corporation recommends that you read this checklist and configure your database accordingly. The security checklist can be found at the following URL:
    http://otn.oracle.com/deploy/security/oracle9i/pdf/9iR2_checklist.pdf
    Examples
    Creating a Database: Example
    The following statement creates a database and fully specifies each argument:
    CREATE DATABASE sample
    CONTROLFILE REUSE
    LOGFILE
    GROUP 1 ('diskx:log1.log', 'disky:log1.log') SIZE 50K,
    GROUP 2 ('diskx:log2.log', 'disky:log2.log') SIZE 50K
    MAXLOGFILES 5
    MAXLOGHISTORY 100
    MAXDATAFILES 10
    MAXINSTANCES 2
    ARCHIVELOG
    CHARACTER SET AL32UTF8
    NATIONAL CHARACTER SET AL16UTF16
    DATAFILE
    'disk1:df1.dbf' AUTOEXTEND ON,
    'disk2:df2.dbf' AUTOEXTEND ON NEXT 10M MAXSIZE UNLIMITED
    DEFAULT TEMPORARY TABLESPACE temp_ts
    UNDO TABLESPACE undo_ts
    SET TIME_ZONE = '+02:00';
    http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_55a.htm#SQLRF01204
    Joel P�rez

  • How to maintain the data  into database table

    Hi,
    experts,
    how to maintain the data  into database table

    There are several ways to maintain data in the database
    1. Use table maintanance generator . You can create this using SE11 and data can be edited through SM30.
    2. Loginto  SE11 with the specified table and check the ATTRIBUTES tab. There you can set some parameters for maintaining the database. When you set Maintain database, you edit the data thorugh SE11 it self
    3. Through Se16 as well.
    4. A small abap program can do the above task as well.
    Thanks,
    Raj
    Edited by: Rajanya Kolavennu on Feb 5, 2008 8:33 PM

  • How to Find the number of Databases in a server.

    HI,
    Please tell me how to find the number of Databases are in a server . when the DB is not up.
    ps -ef | grep ora_
    This i know whether our DB is up or not. But i want to know how many databases are in a server .If the database is down .
    Cheers,
    Gobi.

    Hi,
    [oracle@oralinux admin]$ lsnrctl status
    LSNRCTL for Linux: Version 9.2.0.4.0 - Production on 01-DEC-2006 16:25:41
    Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
    TNS-01169: The listener has not recognized the password
    [oracle@oralinux admin]$
    Plz give me the solution.
    Cheers ,
    Gobi.

  • How to get the list of database Views modifying the DB tools list tables.vi

    Hi,
    I have a problem, I just started using LabVIEW and in particular the LabVIEW connectivity toolkit and I am lookig fgor suggestion regarding how to get the list of database Views modifying the DB tools list tables.vi...
    Thanks in advance,
    Michela

    Hi Michela,
    since the VI you want to modify is part of a Toolkit, I suggest you to copy the whole block diagram in a new VI and then save it in a new location.
    Place the DB List Tables.vi on a block diagram, double click on it and go to the tab "Window -> Show Block Diagram "
    Select "Edit -> Select All" to select the whole block diagram and select "Edit -> Copy"
    Open a new VI and select "Edit -> Paste"
    Save the new VI
    In this way you can modify everything you want without overwriting the Toolkits VIs.
    Hope this can help.
    Regards, 
    Andrea N.
    Systems Engineer ATE & RF - Mediterranean Region
    National Instruments Italy

  • How to extract the Physical Query(database Query)

    Hi ,
    How to extract the Physical Query(database Query) from obiee which was fired in obiee
    Regards
    Ranga

    Hi Ranganath,
    Have a look the following links.
    Setting Logging level:
    http://gerardnico.com/wiki/dat/obiee/loglevel
    How to see physical query:
    http://gerardnico.com/wiki/dat/obiee/manage_session_log
    If you are new to OBIEE, spend some hours on the following blog to learn from basics to advanced level.
    http://gerardnico.com/wiki/
    http://obiee101.blogspot.com/
    http://www.rittmanmead.com/blog/
    Hope it helps you.
    Regards,
    Kalyan Chukkapalli
    http://123obi.com

  • HT1414 I cannot access the internet on my home network but can on any other network

    My iPad is able to access the internet on all other networks but my new home network doesn't allow me to get on.

    I do not think so.  It seems that this has happened to some people that use comcast.  I am wondering if anyone has figured out a way to override the issue.

  • How to access the Microsoft Dynamics database tables for creating a DW

    Hi all,
    I m trying to build a POC for the manufacturing industry (Dairy Industry).
    Hence I'm trying to install Microsoft Dynamics and access the tables available its OLTP and create a warehouse.
    Please let me know how we access the database tables of Microsoft Dynamics to do etl (using any etl tool).
    Then i would be creating reports and dashboard using OBIEE 11G.
    I thought of getting help before installing microsoft dynamics so that i can install the necessary components to achieve the same.
    Please let me know the necessary things i would need to do.
    Thanks
    Jaan

    Hi,
    I think this can be possible with microsoft ssis etl tool.
    Thanks,
    Navin Kumar Bolla

  • How to save the current access database as a new file with a specified name

    what I am trying to do is after writing data to a public access file, save it as a new access file,
    clear the public access file and write new data in it.
    repeat the above process when requested by the operator.
    which database function should I　use to execute this "save as " action?
    thank you...
    Solved!
    Go to Solution.

    I'm not sure what DB tools you are using in LabVIEW however I was able to locate the following function that seems to accomplish what you asked about.
    DB Tools Save Recordset To File VI: http://zone.ni.com/reference/en-XX/help/370016C-01/lvdatabase/db_tools_save_recordset_to_file/
    As far as database applications go there are several examples included in LabVIEW some of which include SQL functions as well.
    Regards,
    Isaac S.
    Regards,
    Isaac S.
    Applications Engineer
    National Instruments

  • How to specify the storage access key for a ResourceFile?

    The azure batch tutorial shows how to put program file into a public container in a storage account and let azure batch to download them to TVMs and run.
    In real world scenario, if I don't want to use a public container or a shared access signature and want the azure batch to use a access key to access the container where my task program file is located, is it possible? How to do it?

    I see that you are conversant with the issues here but for other readers let me provide a quick review:
    The properties of a task (ICloudTask/CloudTask) include a collection of ResourceFile instances. ResourceFile instances
    map blobs in Azure Storage to local files in the Container/VM/Guest-OS.  Azure Batch copies the files from storage into the VM before the task runs and it uses the SAS (and other data) in the ResourceFile to do so.
    The ICloudTask/CloudTask.FilesToStage collection exposes the object model's mechanism for customizable file staging.
     The collection accepts instances of IFileStagingProvider which ultimately are invoked to create/augment the ResourceFile collection on the task.
    A default implementation is provided: FileToStage.
    An instance of FileToStage maps a file local to the client library to a file ultimately in the VM (indirecting through
    blob storage/SAS).  When instances of FileToStage are added to the CloudTask.FilesToStage the following occurs on Commit()/AddTask:
    A container is created in the given storage account.  The name is constructed to avoid collisions.
    The container is given a restricted SharedAccessBlobPolicy.
    All of the local files specified are uploaded to that container
    An SAS for each blob is created
    (24hr expiry)
    and a ResourceFile is constructed for each FileToStage
    The ResourceFile for each FileToStage is added to the CloudTask.ResourceFiles collection.
    FileToStage and the FilesToStage collection are intended to assist the customers that either want a shortcut around the issues of blob containers and SAS or want to control the file staging process via a custom implementation of IFileStagingProvider.
    When using the default implementation FileToStage to stage local files, care should be taken to monitor the number of containers created and the storage cost implications.
    Your concerns about SAS based methods are not directly addressed by the default implementation.  I would only note that SAS values can be re-used across tasks and jobs so the existing implementation can be used to get local data into storage and usable
    SAS values.  However, you already have these sorts of features implemented it seems and as you point out, there is the problem of SAS expiry. 
    daryl

Maybe you are looking for