How to accurately align multiple cameras in the workspace.

Hi there
The video I am currently working on requires me to have two cips running simultaniously on screen. I have already resized them, and completed editing the film, but due to the fact that I cannot seem to find any rulers or grid (a la photoshop) to accurently align them to, they seem to be misaligned when I render or export the project. (See below photo).
Does anyone have any suggestions? I may very well just be not seeing an obvious 'Show Grid' or 'Show Ruler' option, but I cannot seem to find any, nor any way to fine tune and accurately resize clips in the way I am trying to.
Any help would be greatly appreciated.
Adam

You can make a horizontal line to act as a ruler in the Titler.
You can use the Grid effect on an Adjustment Layer to use as an guide.
You can also check the horizontal property in the Effect Controls if the are the same, as well as for the scale. Assuming the cut is dead center.
You can adjust the Safe Margins in the Project Settings to use that as a guide.
Pick one

Similar Messages

  • How can I align multiple titles in Premiere Pro?

    We are working on a video (obviously) and we have a bullet list that we'd like to come up as the speaker is naming off specific items. So far we have created a separate title for each bullet point, so that we can control when the bullets fade in. The issue we're having is that we have to eyeball the alignment right now and it's not always accurate. So i'm looking for some help. How can I select multiple titles in the timeline and right align them - OR - is there a way to have all of these bullet points in one title and still maintain control of when they fade in and out?

    This technique will only work with current versions of PPro - it looks harder to do than it actually is:
    Create the title with all the bullet points, aligned as you wish, in the Title Tool.
    Exit the title tool, the title you just created will appear in your project.
    Click on the title to select it (if it is not already selected) and then go to the menu Edit > Duplicate.
    Repeat the duplication process to make as many copies as number of bullet points you want to transition on.
    Place the first copy of the title where you want the Title to appear in your video.
    Double click on the clip of the title on the timeline to re-open the Title Tool. Delete all the text except the first line.
    Now place the second copy where you want it to appear in the video.
    Double click on it to re-enter the Title Tool, and delete all the text except the first two lines.
    Repeat this process for as many bullet points as you have, delating one fewer bullet point each time. You can add transitions at the cut points between the titles (such as a dissolve) to make the next bullet point appear as you wish.
    If you try to to this using an early version of PPro this will not work as the titles and its copies are linked - so if you change one of the copies, it changes all the other titles. Fortunately this has been fixed in the current version.
    MtD

  • How can I save multiple titles under the same DVD?

    I use HandBrake to rip DVD's into iTunes. How can I save multiple titles under the same DVD? For instance, I have a Jimi Hendrix documentary that comes with special features, such as concert performances. I would like to have the main feature and the special features saved in my iTunes under the same title, perhaps as different 'tracks' (kind of like how different songs can be saved under the same album).
    Is there a way for me to do this, or am I chasing phantoms?

    *This response is for iPhoto 11 (v9). If you're using an earlier version, please post back and let us know. Troubleshooting steps are not the same for different versions. To find out which iPhoto you have: iPhoto Menu -> About iPhoto)*
    Duplicate the photo first. (Photos -> Duplicate). This means that you will have multiple copies of the master as well as the edited version.
    If you use versions like this often and wish to have only one master then you can do this with Aperture.
    Regards
    TD

  • Solaris 11 IPS:  How do you post multiple versions of the same package?

    How do you post multiple versions of the same software package on a single IPS instance(port)? Oracle was able to do it here with versions 151 and 175 of S11:
    http://pkg.oracle.com/solaris/release/
    Unfortunately, based on my searches, no where in the documentation (http://www.oracle.com/technetwork/server-storage/solaris11/technologies/ips-323421.html) does it explain to the development community how this is done. The best I can do is create pkg repo instances on different ports to host each different software version.
    We are trying to deploy an IPS repository for our drivers and utilities that our customers can link to and pull updates from. We have been able to post a software package to the repository using the command:
    pkgsend publish -s http://localhost:1234 -d ./ Appv1.p5m
    This posts the package on the IPS repository instance at port 1234 on the server. However, we would like to post multiple versions of the package on the server at the same URL. Why the same URL? So that our customers and end-users need only point to a single URL to pull down our software rather than having to add a new URL to the publisher list each time we have an update. We want at least 5 of the previous software versions to be available on the server. Posting each version of the application or driver on a different IPS instance on a different port will require customers to add multiple URLs to their publisher list and they also will not be able to initiate remote scans for updates.
    Has anybody been able to do this? Is any documentation forthcoming?
    Edited by: user13489824 on Jun 25, 2012 10:17 AM

    dhduvall: Thanks for your response. Yes, one would think that as long as the version numbers are different, you should be able to accumulate multiple versions of a package in a repository. It looks like Oracle has done it in their S11 repository unfortunately, as far as I know, they have not shared the steps on how to do this. I would like to publish two versions of the same package. I.E. two different manifests with two different fmri.pkg version strings and two different binaries.
    If I publish one package after another like this:
    pkgsend publish -s http://localhost:1234 Appv1.p5m
    pkgsend publish -s http://localhost:1234 Appv2.p5m
    Then only the second package shows up in the repository, as if it over-wrote the first one.
    Running pkgsend with two manifest, like this:
    pkgsend publish -s http://localhost:1234 Appv1.p5m Appv2.p5m
    Will cause pkgsend to combine the packages and manifests as if they were a single package... not what I am trying to do.
    Both approaches are complete without errors but neither achieves what I am trying to do.
    alan.pae: Thank you. Unfortunately, the link didn't really help. I've read Oracle's white papers and IPS developer guide so I'm familiar with the topics covered.
    Lex: Yes, I know. I specified the versions in the pkg.fmri value string.

  • How do I manage multiple devices on the iCloud

    How do I manage multiple devices on the icloud.  We have 2 ipods, 2 iphones, ipad and a mac and right now the icloud thinks my son has my phone.

    Try going to Settings>Mail,Contacts,Calendars>My Info (in the Contacts section), then select your contact from the list.

  • How do I have multiple accounts on the same computer

    how do I have multiple accounts on the same computer? The idea of ", hold down the option (on a Mac)/ shift (on a PC) key each time you start iTunes" does not seem to work for me. Thanks.

    Create multiple Windows User Profile with each managing his own iTunes account and library.
    To create a user account on Windows 7:
    To open User Accounts, click the Start button , click Control Panel, under 'User Accounts and Family Safety', select Add or Remove User Accounts.
    Click Create a new account.
    Type the name you want to give the user account, click an account type(make sure to give Administrator), and then click Create Account.

  • How do I have multiple versions of the same .chm?

    Our developers recently were required to make changes to an earlier version of our software (thank goodness for backups). So I'm having to revert to that earlier version, make changes, and create a revised .chm. HOWEVER, I already had completed the upcoming release's .chm and don't want to lose all of those changes. To make matters more complicated, I also have requests for changes to the Help for the future release.
    So, how does everyone have multiple versions of the .chm on their system at the same time and keep them separate, yet compile the right files with the right version? I had thought I could just create a new folder with the files that changed for the various versions, but updating them in Word 2007 is not a pretty proposition. I'll then have to import them in and replace the "old" ones. There has to be an easier way! I'm sure other people do this on a regular basis, but this is the first time I've had to go back a version, maintain the next version, and start work on a yet-to-be-released version all at the same time.

    It never ceases to amaze me how questions on the forum are like buses, none for an hour then three come along. Not your fault but this was asked just a couple of days ago.
    When your developers issue a new version you need to save a copy of the source, we just zip it up. Then you carry on editing for the next version and zip that up and go again.
    Then when a change is required to an older version, you dig it up, amend it and zip it again.
    Not sure how it works with source control. The above is easier and reliable, assuming you manage it tightly.
    See www.grainge.org for RoboHelp and Authoring tips

  • How do I sync multiple iPones on the same iMac

    How do I sync multiple iPones on the same iMac

    Use another account where?  Let's say phone A is being synced to Mac A, and now you want to add phones B and C to Mac A, then they will all be syncing using the same account, the one used on Mac A.  Phones B and C can share apps and songs currently on Mac A's iTunes, but they will lose any apps, etc. that were previously put on them from other macs that use different accounts.  That's the way it works. If you want to keep the apps on B and C, then keep syncing them to their original macs.

  • Label Printing Using Address Book - How can I Print multiple labels of the same name?

    Label Printing Using Address Book - How can I Print multiple labels of the same name?

    I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
    It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
    After printing, trash the added versions.

  • In Elements 7.0, how can I delete multiple photos at the same time?

    In Adobe Photoshop Elements 7.0, how can I delete multiple photos at the same time?   Please be a little specific so I can follow your instructions as I'm not real smart at computers; I'm an intermediate user.  Thank you.

    Shift-click the photos or Ctrl-click them to select them, then right-click one of them and choose Delete from Catalog. They will all go together.

  • How can I open multiple instances of the same version of FF?

    I understand that if I have multiple profiles, I can run different versions of FF side-by-side (like 3.6 and 4).
    However, what I'm interested in is how I can launch multiple instances of the same version of FF (4, for instance) using the same profile. In other words, I want to be able to double-click the desktop icon for FF, and open a new instance, and keep doing that as many times as I want. I don't want to have a different icon and profile for each instance (too much overhead to keep a dozen+ profiles in sync).
    I can always launch one FF window instance, and then keep clicking ctrl+N to launch new instances from inside it, which they all share the same profile (as I want). So, basically, I want to be able to do that from my desktop icon, rather than by having to do it with the keyboard ctrl+N sequence.

    But I don't understand why whatever Firefox does when you click ctrl+N can't also be done (with some sort of command-line switch) from a desktop icon?
    In other words, I clearly can create many FF instances (even if they are the same FF.exe process) by doing ctrl+n a bunch of times. Why then can't this behavior be done from a desktop icon with some parameters?
    As far as I know, FF is the only browser that doesn't directly allow multiple browser instances from desktop icons. IE, Chrome, Safari, Opera, etc... all let me launch a new instance (even if they are all single process and the instances are shared within the process).

  • How can I combine multiple deliveries of the same address to one shipment.

    Hello Friends,
    My client is sending multiple deliveires with multiple shipments to the same customer. His cost is increasingm therefore I am lookign to help him to combine all the deliveries to one shipment and one delivery.
    How can I combine multiple deliveries of the same address to one shipment.
    Please help me.
    Regards

    Of course, you can combine several deliveries into one shipment. You can set your own selection variant to select deliveries with the same ship-to party.
    You cannot combine several deliveries into one delivery. The combination of deliveres is possible only when creating deliveries in VL10*.
    Edited by: Harry Wu on Jun 21, 2010 4:30 AM

  • How can I remove multiple copies of the same song from the iTunes listing?

    How can I remove multiple copies of the same song from the iTunes listing. The program seems to be picking up the same songs from, for example, my user area and my public area in the C drive

    As above, Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library, however it is a manual process and the article fails to explain some of the potential pitfalls.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
    Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve/merge ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    tt2

  • How can I print multiple copies of the same photo onto one sheet of paper?  Do I have to Duplicate the photo in iPhoto and then select them all?

    How can I print multiple copies of the same photo onto one sheet of paper?  Do I have to Duplicate the photo in iPhoto and then select them all?

    no - you simply have to select the option to print mucliples of a photo on a page
    select the photo and go to the file menu ==> print - select the printer, paper size and print size and click customize - in the tool bar click on the settings icon (the gear looking thingy) and select "multiple of the same photo per page" and the preview will reflect this option showing a full page of the selected size photos
    LN

  • How do I merge multiple subscriptions to the same podcast?

    In iTunes I have multiple subscriptions to the same identical podcast (same podcast name and same url) ... some of the subscriptions have duplicated entries and some have unique entries ... (how this happened I have no idea, but that is beside the point) ... my question is how do I merge these multiple subscriptions into a single podcast subscription? I have tried cut & paste in the hope that I could then delete (unsubscribe) to all of the redundant/repeated subscriptions, but that does not work ... in explorer I have found that ALL my podcast files from ALL my podcast subscriptions are found in a single folder .. so all the entries from my multiple subscriptions are there as well ... this smoked my hope that each podcast subscription would have it's own folder or sub-folder ... so I'm stuck ... does anyone know how I can merge multiple subscriptions to the same podcast into a single podcast subscription (without my losing the uniques scattered throuhout the mutiple subscriptions) ... ???

    I would love to be able to do exactly what you are suggesting .. the problem is, if I delete the duplicate subscriptions, I lose the unique files unique to the duplicate subscription I delete ... the problem is that I can't find a way to save/move the uniques (in advance of deleting the duplicate subscription) into a single subscription ... is there a way to do this ??? Does anyone know how to do this ??? Please help !!!

Maybe you are looking for

  • How can I control the space before and after text in a table

    Hello I have a series of icons with descriptions, these are lined up with icons on the top row and description text in the bottom row. Each icon and description is divided by a stapled line. The text is of varying width, therefore the column width mu

  • I can't get my iTunes to update to the new version.

    I updated my iPod and so I need to update my iTunes. When I try it tells me this: "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\SyncServices\Schemas\Calendars.syncschema\Contents\Resources\ja.lproj\L ocalizable.str

  • Preview issue with external HDD

    Hi, I have a problem with Preview and external HDD. Preview doesn't recognize my external HDD, at least the pictures on it. When I try to open any image on External HDD, Preview says, that the file doesn't exist. But when I open the picture with Safa

  • BI System in separate client in ERP system

    Hello Since we build small testing landscape with ERP 6.0 IDES I was looking for the solution how to add BI system in existing landscape Two solutions are possible: 1 install BI on separate hardware - HERE I need to buy additional hardware 2 install

  • HT203433 I downloaded Garageband from the App store.  Where is it?

    It shows up in my list of downloaded apps but that's it.  I don't see any icon or other link to open it.  I've syncd my iPad but nothing shows up.