How to activate a custom datasource of a view

Hello folks,
I'm working on BI 7.0 and ECC 6.0.
I've created a z datasource on a view. It appears in RSA6. It is not visible in RSA5 which means I cannot activate it. When I replicate the datasource in BW, it appears as a modified version and not as an active one. How do I activate this z datasource? Please note that I'm working on BI 7.0 and ECC 6.0. I would appreciate it if someone could throw light on this one.
Thanks
BG

data: wdevent TYPE REF TO CL_WD_CUSTOM_EVENT.
wd_this->CREATE_A ( exporting wdevent = wdevent ).
wd_this->CREATE_B ( exporting wdevent = wdevent ).

Similar Messages

How to activate a CRM datasource and also to enhance

Hi experts
1. can somebody guide me how to activate a CRM datasource like in R/3 we do it in RSA5 and check it in RSA6
do we have to do the same and also any additional steps need to be performed for adapters.
2. How do we enhance the CRM datasources.
can somebody guide me with steps for the both.
thanks and regards
Message was edited by:
 Neel Kamal

Hi ,
BWA1 is for maintaince of Datasource in which scenario do we use this Tcode isit only when we do the Generic datasource.
BWA1 is for all standard crm datsource maintaince
rsa2 for generic datasource
BWA5 i think we use this Tcode after RSA5 activation additionally.
yes(incase of delta)
BWA7 do we have to use this tcode along with BWA1 for standard datasources also or else only for generic datasource.
irrespective of the type of dtasource,use it if you want to load delta(you need to delta enable the datasource here)
So we don't need to put the code as we traditionally do it for R/3 , if we just mapp the fields that would bring the data for these fields.
as i told in CRM we willwrite code in BADI in case you have done enhancement
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/a-c/customer%20enhancements%20and%20userexits%20in%20bw%20-%20sap%20netweaver%20%20know-how%20network%20webinar.pdf
also chk this(credit goes to the writer)
CRm enhancement:
1. Enhance Extract Structure with the required fields. (Create & include an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double click on the Datasource and remove the flags in the column 'Hide Field' for all fields of Append).
2.b) If the new fields cannot be seen in the extract structure of the transaction BWA1 then change and save the datasource, and then activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO . Follow the path ->SAP Implementation guide ->Implementation with other mySAP components ->Data transfer to the Business Information Warehouse-> Settings for the application specific datasources (CRM)->Settings for BW adapter-> Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Refer to the SAP Note 692195 for more info (Question 4 to be specific).
Cheers,
Swapna.G
Message was edited by:
 swapna gollakota
Message was edited by:
 swapna gollakota

How to call a custom controller method from view

Hi,
I ve created a simple web service and consumed it in a model. Mapped the input & output parameters to custom controller context which in turn mapped to component controller's context which in turn to view's contexts.
How to call a custom controller method from view?
Please explain the syntax.
Regards,
Manoj.

Hi Patralekha,
Give some idea for the below scenario:
I ve created a simple web service and consumed it in a model. What I did was
1) for the input parameters, mapped the node from view->custom controller->model
2)for the output parameter, mapping from model->custom controller->view.
It works fine.
But I don't want to access model nodes directly, rather I want to set the input param in somewhere else (like custom controller) before calling the appropriate method, same for the response also.
Share me your thoughts.
Regards,
Manoj.

How to create a Custom DataSource ?

Hi to everybody,
I'm a little confused about creating a custom DataSource that i need to create a player
that shows as a video some jpeg images retrieved from an input stream.
question 1:
do i have to store all the images in the data source ? or i can just set the current image every time i rereceive a new image ?
question 2:
can i link my JpegInputStream to my custom data source in order to read the images ?
thank you in advance
ps please help me .. it's really important.
Marco
Message was edited by:
lecoramarco
Message was edited by:
lecoramarco
Message was edited by:
lecoramarco

hi
u will have to create DS using FM.
use the standard function module and edit the FM as per ur need.
this post should help u....
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
cheers.

How to activate all standard datasources..

Hi Experts,
i am phasing issue in DM1 system. All standard data sources are goes to deactivate stage as shown in the below screen shot.
if anybody has known the solution please let me know..
Best Regards,
Sowjanyak.

Hi,
Before activating Data sources in Rsa5.
Did u check Prerequisites :
Installing DataSources - SAP Documentation
http://help.sap.com/saphelp_srm2007/helpdata/en/5c/82cc3138754e81ab2ffde7e6fd89e4/content.htm
Thanks.

How to activate a custom parser ?

I have written a small custom parser which should deal with *.txt documents. If
called by an application the parser works.
Now, I have tried to register the parser
in iFS so that it is invoked automatically
whenever a *.txt file is submitted via one
of the standard protocol servers (e.g. Smb).
I put the *.class file of the parser in my $ORACLE_HOME/ifs/custom_classes directory and uploaded the following xml-file using ifsput into ifs (as system user):
<?xml version="1.0" standalone="yes"?>

<PROPERTYBUNDLE>
<UPDATE RefType="valuedefault">ParserLookupByFileExtension</UPDATE>
<PROPERTIES>
<PROPERTY ACTION="add">
<NAME>txt</NAME>
<VALUE DataType="String">TxtParser</VALUE>
</PROPERTY>
</PROPERTIES>
</PROPERTYBUNDLE>
The parser was successfully registered as the
entry in the corresponding Register... dialog in the iFS manger shows, but it is not used. Its initialization message does not appear on any log and the insertion of a new *.txt file does not lead to the desired parser activity.
Do I have to do some additional installation/registration procedures or
must I deregister the default parser for txt somehow ?
Greetings, Michael Skusa
null

<BLOCKQUOTE>quote:<HR>Originally posted by Mark_D_Drake():
Given that the parser is not in a package can you tell me what happens when you insert a ".txt" file into the iFS.
<HR></BLOCKQUOTE>
I insert a file via SMB, but nothing
happens. I neither get log entries nor any
error messages. The file is stored correctly,
but there is no parser activity. Even
log files like those which are generated
for xml files are not generated.
<BLOCKQUOTE>quote:<HR>
Do you create any log file from you parser that might indicate whether or not the parser was instantiated. Could you post the code...
<HR></BLOCKQUOTE>
Currently I do not create log files. I write
an initialization message to stdout, but
I do not know where this message would appear
when the parser is called by iFS.
Perhaps a look at the code could help. Most
of the code is a copy of an example from
the iFS developer's guide.
I just have modified the parse method.
And I added a main method so that I can call
the parser directly with a file from the
local file system in order to test its
functionality. This works as it should.
But the automatic invocation by iFS does
not work. I registered the "parser lookup"
by uploading the xml configuration file
(see earlier mails) with ifsput, which was
successful.
Registration by copying the xml file to iFS via SMB resulted in an error of the internal XML parser
(root element expected in line 0, column 0).
This is the code of my sample parser:
import oracle.ifs.common.*;
import oracle.ifs.beans.*;
import oracle.ifs.beans.parsers.*;
import oracle.ifs.beans.LibraryObject;
import java.util.Hashtable;
import java.io.*;
class TxtParser implements Parser
private LibrarySession session;
public TxtParser (LibrarySession s) {
session = s;
System.out.println("TxtParser initialized.");
public LibraryObject parse(InputStream stream , ParserCallback callback, Hashtable options) {
return parse (new InputStreamReader(stream), callback, options);
public LibraryObject parse(Reader reader, ParserCallback callback, Hashtable options) {
try {
// This part is copied from a sample program of the developer's guide
DocumentDefinition newDocDef = new DocumentDefinition(session);
String fileName = (String) options.get(Parser.CURRENT_NAME_OPTION);
newDocDef.setAttribute("NAME", AttributeValue.newAttributeValue(fileName));
Format f = (Format) session.getFormatCollection().getItems("Text");
newDocDef.setFormat(f);
newDocDef.setContentReader(reader);
Document d = (Document) session.createPublicObject(newDocDef);
String folderName = (String) options.get(Parser.CURRENT_PATH_OPTION);
Folder target = (Folder) session.getRootFolder().findPublicObjectByPath(folderName);
target.addItem(d);
// look up a log file in ifs folder "public" and append a message
Document log = (Document) session.getRootFolder().findPublicObjectByPath("/public/docs.log");
InputStreamReader is = new InputStreamReader(log.getContentStream());
StringBuffer buffer = new StringBuffer();
char[] exchangeBuffer = new char[100];
try{
int read = is.read(exchangeBuffer);
while (read > 0) {
buffer.append(exchangeBuffer,0,read);
read = is.read(exchangeBuffer);
} catch (IOException e) {}
buffer.append("\nfile "+fileName + " inserted into " + folderName);
DocumentDefinition logDef = new DocumentDefinition(session);
logDef.setContentReader(new StringReader(buffer.toString()));
logDef.setAttribute("NAME", AttributeValue.newAttributeValue("docs.log"));
log.free();
log = (Document) session.createPublicObject(logDef);
target = (Folder) session.getRootFolder().findPublicObjectByPath("/public/");
target.addItem(log);
return d;
} catch (IfsException e) {
e.printStackTrace();
return null;
public static void main (String[] args) throws Exception {
LibraryService ifsService = new LibraryService();
CleartextCredential me = new CleartextCredential("s cott","tiger");
ConnectOptions connectOpts = new ConnectOptions();
connectOpts.setServiceName("IfsDefault");
connectOpts.setServicePassword("ifssys");
LibrarySession ifsSession = ifsService.connect(me,connectOpts);
TxtParser p = new TxtParser(ifsSession);
Hashtable options = new Hashtable();
if (args.length > 0) {
options.put(Parser.CURRENT_NAME_OPTION,args[0]);
options.put(Parser.CURRENT_PATH_OPTION,"/home/scott/Experimente/");
FileInputStream f = new FileInputStream(args[0]);
p.parse(f,null,options);
ifsSession.disconnect();
null

How to activate business coontent datasources in r/3 system

Hi Experts,
Could any one please provide me the steps for installing business content data sources in R/3 system ,
I am installig PM
Thanks in Advance,
Nitya

Hi,
You could try this,
1) Go to tcode RSA1
2) Click on the BI Content link in the left navigation bar
3) Click on the Packages link in the left navigation bar
4) Find +Business Content: RPM (Resource & Program Management)
5) Expand folder to MultiProvider and double-click on 0RPM_MP01
6) In right-navigation pane, select Grouping > In Data Flow Before and After (this will take several minutes to complete)
7) Expand folder to 0RPM_MP01 > InfoObject
8) Uncheck all items that have a green square under Active Version Available (hint: these are the only items that are checked that you should be able to deselect or uncheck)
9) Repeat for InfoArea, InfoCube and Query Elements (the only one that may already be installed in your case is the InfoArea)
10) Repeat Steps 5-9 with the exception that you'll be doing InfoCubes now by expanding the InfoCube folder and double-clicking on all of the InfoCubes except 0RPM_C01.
Regards,
Kiran

How to call a custom method of same view?

Hello
I am developing a WDA on ABAP. I kept 3 LTA (Link To Action, kind of hyper link) on the initial_view, they perform the below functions (pls. note all the below 3 are on the initial_view ONLY),
1) LTA_1 -> Creates 'A' -> The linked EVENT for this LTA is CREATE_A
2) LTA_2 -> Creates 'B' -> The linked EVENT for this LTA is CREATE_B
3) LTA_3 -> Creates 'A' and 'B' -> The linked EVENT(onAction) for this LTA is CREATE_A_and_B, fine.
I wrote the ABAP code for creating the 'A' for LTA_1 in the associated Event Handler(method), same way i did for B
Now, for LTA_3 (Event is CREATE_A_and_B), i do not want to replicate the code from LTA_1 and LTA_2.
1) So, i guess, i just call the above )Event Handler) methods sequentially in CREATE_A_and_B's ABAP editor, am i right?
2) If so, pls. let me know how to call these methods, say, just for A, so that i will call for B on my own. Normally, we call as below
my_Class->my_method_name
3) If so, there is not-optional parameter as WDEVENT, just i need to pass blank for it?
Thank you

data: wdevent TYPE REF TO CL_WD_CUSTOM_EVENT.
wd_this->CREATE_A ( exporting wdevent = wdevent ).
wd_this->CREATE_B ( exporting wdevent = wdevent ).

Unable to create Custom Datasource on AFRU -Invalid extract structure error

Hello folks,
All SDN experts I need urgent help with an issue here.I am trying to create a custom datasource on a view on AFRU table.But i am getting this error 'Invalid extract structure template ZAFRU_V ' , i know it could be cuz of the field SMENG which is refrenced to AFVV tables MEINH field.My boss needs to have this field.I would like to know what can i do to get it, do i need to write a user exit, will that help or not. Please tell me what to do.
Thanks,

i tried what you asked me to do, this was my joing condition
AFRU     MANDT     =     AFVV     MANDT
AFRU     AUFPL     =     AFVV     AUFPL
AFRU     APLZL     =     AFVV     APLZL
But then what i ran into was if the counter (APLZL) was 0 or blank it wouldnt get that data for me.That means i will loose hundreds or thousands of records if they have confirmation and routing number of ops in order but no counter.Please assist.
And to answer is open so please any one who sees this and knows the answer please reply.
Thanks.

How to activate Extended Rebate Processing in Customizing for billing?

sap gurus:
How to activate Extended Rebate Processing in Customizing for billing?

SAP Knowledge Base Article
1520390 - Activation of Enhanced Rebate Functionalities - IMG Customizing Transactions - SAP Menu
Version 1 Validity: 19.10.2010 - active
Language English
Symptom
Enhanced Rebate Functionality is not available and should be activated
In the customizing IMG (Transaction SPRO) the node for Extended Rebate with the relevant customizing transactions are not visible
The SAP Menu does not include the transactions for Extended Rebate
Environment Enterprise Function EA-ISE must be available in the system (visible in transaction SFW5).
Reproducing the Issue
Call transaction SPRO
Node Extended Rebate Processing is missing:
IMG
Sales and Distribution
   > Billing
        > Rebate Processing
             > .................
Resolution To activate the Extended Rebate Processing and make the node and customizing transactions visible proceed in the following way:
Call transaction SFW5
In the folder ENTERPRISE_EXTENSIONS choose the function EA-ISE
Activate this enterprise extension
Thereafter the menu path in SPRO for Extended Rebate Processing will be visible:
IMG
Sales and Distribution
   > Billing
        > Rebate Processing
            > Extended Rebate Processing
                        * Settings for Agreement Types
                        * Set up Variable Key for Rebate Settlement
                        * Check Variable Key for Rebate Settlement
                        * Activate Extended Rebate Processing
                        * Simulate And Execute Reorganization of Statistical Data
Furthermore the users will have the relevant transactions available in the SAP Menu:
SAP menu
> Logistics
     > Sales and Distribution
          > Billing
               > Rebate
                    > Extended Rebate Processing
                         * RBT_ENH_VB7 - Extended Rebate Settlement
                         * RBT_ENH_ACT - Update of Indirect Sales
                         * RBT_ENH_PLAN - Update of Indirect Planning Data
For futher infomation on the extended rebate process please refer to the following links of SAP help portal:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/5a/5b9b3c0f4da40ee10000000a11405a/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/79/a5ee3c1f63a518e10000000a11405a/frameset.htm
Keywords
Extended rebate agreement, extended rebate processing, erweiterte Bonusabwicklung, Menü, Pfad nicht vorhanden, aktivieren, erweiterter Bonus, Bonusabsprache
Header Data
Released On
21.10.2010 08:01:20
Release Status
Released to Customer
Component
SD-BIL-RB-ENH Enhanced Rebates
Other Components
   SD-BIL-RB Rebate Processing
Priority
Normal
Category
How To
Product
Product
Product Version
SAP ERP Central Component
All versions
SAP R/3 Enterprise 4.7
All versions

How to activate Custom Feature in SharePoint 2010 using Client Object model

I am trying to Activate a custom feature using Client Object Model in SharePoint 2010. Here is the code I used. When I execute the code, I got the error "Feature with Id 'xx' is not installed in this farm, and cannot be added to this scope while
creating site collection". Can anyone help?
ClientContext clientContext = new ClientContext(spURL);
//GUID of the custom feature
Guid districtFeatureId = new Guid("5b3529de-5045-46da-af87-8d2e32c121a7");
Site clientSite = clientContext.Site;
FeatureCollection clientSiteFeatures = clientSite.Features;
clientContext.Load(clientSiteFeatures);
clientContext.ExecuteQuery();
//Activate the feature
clientSiteFeatures.Add(districtFeatureId, false, FeatureDefinitionScope.Site);
clientContext.ExecuteQuery();

Hi shil chan,
When you activate a feature on the site collection, the feature should be scoped to site or farm, the error message shows it cannot find the specific feature, this will happen when you have a feature in web
scope or the feature isn’t installed.
So, to troubleshooting this issue:
Verify whether the feature is scoped to web. Please go to
Site Setting->Site Features . If the feature is a web scope feature, then add the feature to webfeatures.
Make sure the feature is installed correctly.
Please inform me freely if you have any questions.
Thanks

How to activate the ATP buckets in APO?

Hi,
We are in the process of changing the ATP buckets in our APO system.
I know the Path in the configuration:
Advanced Planning and Optimization -> Global Available-to-Promise (Global ATP) -> General Settings -> Maintain Global Settings for Availability Check
On the left side you will get three sections:
Global Settings
ATP Buckets (Active)
ATP Buckets (Planned)
I can change the values in (example field Shift Receipt Bucket) the ATP Buckets (Planned) section and save it with a transport. Now the question is how to activate the buckets. Is there another transaction for this? SAP Help doesn't specify how to activate.
Any ideas are highly appreciated.
Thanks,
Mahesh

Hi,
To activate the buckets one need to check the box 'Current' in the options under ATP Buckets (Active). Also, as referred earlier by Dipthi do look up the documentation under:
SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Settings for Global ATP -> General Settings for Global ATP ->Definition of Buckets for ATP Time Series ->Activation of Bucket Parameters for ATP Time Series.
The details are as beneath:
Use
If you change bucket parameters (see Definition of Buckets for ATP Time Series), these must be activated subsequently for the ATP time series.
Features
The system activates the bucket parameters in the following situations:
Since activation in each of the situations described below leads to downtime, you should change bucket parameters less frequently than other Customizing settings.
·        Creating the active planning version for a client using transaction /SAPAPO/MVM
If you set up a system again, you should process the bucket parameters before you create the active planning version. The bucket parameters are thus activated automatically.
·        Initializing SAP liveCache for all clients using transaction LC10
In the case of an upgrade, you should process the bucket parameters before activating SAP liveCache. The bucket parameters are then activated automatically.
·        Executing the report /SAPAPO/OM_ATP_REBUILD_TS
The system only rebuilds the ATP time series here.
In this case, the SAP liveCache administrator must execute the following steps:
                            a.      Shut down SAP liveCache.
                            b.      Replace the com-file registration:
                                                  i.       At command line level, go to the SAP subdirectory of the SAP liveCache installation.
                                                ii.       Under Microsoft Windows, save the original registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst), for example, by renaming or copying to another directory.
                                               iii.       Under Microsoft Windows, rename the registration file SAPAPO_REBUILD.lst as SAPAPO.lst (UNIX: libSAPAPO_REBUILD.lstas libSAPAPO.lst) or copy it to another directory.
                                               iv.       Under Microsoft Windows, rename the registration file SAPATP_REBUILD.lst as SAPATP.lst (UNIX: libSAPATP_REBUILD.lstas libSAPATP.lst) or copy it to another directory.
                            c.      Launch SAP liveCache.
                            d.      Execute the report /SAPAPO/OM_ATP_REBUILD_TS.
                            e.      Shut down SAP liveCache.
                              f.      Replace the com-file registration by replacing the registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst) with the original versions under Microsoft Windows.
                            g.      Launch SAP liveCache.
Regards
Vinod

How to create a custom function module with the records in SAP R/3?

Hi All,
How to create a custom function module with the records in SAP R/3? Using RFC Adapter I have to fetch the custom function module records.
Regards
Sara

Hi
goto se37...here u need to create a function group... then u need to create a function module. inside assign import/export parameters. assign tables/exceptions. activate the same. now write ur code within the function module
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
Look at the below SAP HELP links, These links will show you the way to create a Function Module
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm

How to create the custom infotypes in Campus Management

Hi,
Please help me how to create the custom infotypes in campus management.
Thanks,
Lakshmi.

Hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Cheers,
vasavi.
kindly reward if helpful.

How to create the custom table?

Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPk

how to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L

How to activate a custom datasource of a view

Similar Messages

Maybe you are looking for