How to activate & process Notification

Hi Team
Pls suggest me steps into Notification processing. I am not clear with Rel, Teco status. When to release & tech. complete this.
Thanks

When any notification is created u2018Outstandingu2019 status (OSNO) is attached to it.
Then defects are recorded if any, task and activities are assigned to it.
Tasks are also having status, when it is created they are in outstanding status,
At the same time notification is put 'In process' (NOPR) by releasing it. Then task are put 'In process' (TSRL) status. In process means work is going on that task.
After completion of task, the status has to be changed to 'Completed' (TSCO)and 'Successfully Completed' (TSCO TSSC).
Then only notification can be closed (NOCO NOTE ATCO).

Similar Messages

How to activate email notification for SC approval

Hi Gurus;
We are using SRM7.
How to activate email notification for SC approval i.e. the system should send email to the approver's external email (e.g.Outlook) informing that there is SC to be approved.?
Thanks

Hi,
You can schedule the /SAPSRM/OFFLINEAPPROVALSEND program.
http://help.sap.com/saphelp_srm701/helpdata/en/31/47c6cb8e9249f2bc29444212e4704a/frameset.htm
Regards,
Masa

How to activate process variant in prod

hi,
When i am activating a newly transported process chain in PRODUCTION,i got the error :
Process variant ATTRIBWAIT EVEN_44W1TMZUNLBVJO1F6MF9GFNT6 does not exist in version A.
How do i activate the process variant ?.Its a wait process between the infopackages and attribute change run.
Please help me its a bit of urgency.

hi,
I am not able to find that in sm62.
Let me give clear picture.I updated the master process chain by putting wait process in between the infopackage and attribute change run.This wait process worked well in test system,but its giving an error in the production system when i try to activate and schedule the chain.So i am not able to schedule the chain.
Please help me with this its a bit of urgency.

How to activate Process Chain in Production System?

Dear all,
We transported the process chain from QA to Production. But in Production they are in hidden mode. Means If i select the process chain, it does not showing any thing. How to I can schedule, activate and how i can see it in change or display mode in production.
Please provide helpful solution ...
Thanks in advance

Hi Shashi,
This should not be a basis issue .
Any how you have to take care of prerequisites like If you use load distribution for your system environment, the server group (logon group) is reduced to one server before debugging commences or if any auth issue.
[Here is all about external debugging |http://help.sap.com/saphelp_erp60_sp/helpdata/en/af/0cb5403fd63426e10000000a1550b0/content.htm]
Regards,
Gagan Deep Kaushal

How to activate Extended Rebate Processing in Customizing for billing?

sap gurus:
How to activate Extended Rebate Processing in Customizing for billing?

SAP Knowledge Base Article
1520390 - Activation of Enhanced Rebate Functionalities - IMG Customizing Transactions - SAP Menu
Version 1 Validity: 19.10.2010 - active
Language English
Symptom
Enhanced Rebate Functionality is not available and should be activated
In the customizing IMG (Transaction SPRO) the node for Extended Rebate with the relevant customizing transactions are not visible
The SAP Menu does not include the transactions for Extended Rebate
Environment Enterprise Function EA-ISE must be available in the system (visible in transaction SFW5).
Reproducing the Issue
Call transaction SPRO
Node Extended Rebate Processing is missing:
IMG
Sales and Distribution
   > Billing
        > Rebate Processing
             > .................
Resolution To activate the Extended Rebate Processing and make the node and customizing transactions visible proceed in the following way:
Call transaction SFW5
In the folder ENTERPRISE_EXTENSIONS choose the function EA-ISE
Activate this enterprise extension
Thereafter the menu path in SPRO for Extended Rebate Processing will be visible:
IMG
Sales and Distribution
   > Billing
        > Rebate Processing
            > Extended Rebate Processing
                        * Settings for Agreement Types
                        * Set up Variable Key for Rebate Settlement
                        * Check Variable Key for Rebate Settlement
                        * Activate Extended Rebate Processing
                        * Simulate And Execute Reorganization of Statistical Data
Furthermore the users will have the relevant transactions available in the SAP Menu:
SAP menu
> Logistics
     > Sales and Distribution
          > Billing
               > Rebate
                    > Extended Rebate Processing
                         * RBT_ENH_VB7 - Extended Rebate Settlement
                         * RBT_ENH_ACT - Update of Indirect Sales
                         * RBT_ENH_PLAN - Update of Indirect Planning Data
For futher infomation on the extended rebate process please refer to the following links of SAP help portal:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/5a/5b9b3c0f4da40ee10000000a11405a/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/79/a5ee3c1f63a518e10000000a11405a/frameset.htm
Keywords
Extended rebate agreement, extended rebate processing, erweiterte Bonusabwicklung, Menü, Pfad nicht vorhanden, aktivieren, erweiterter Bonus, Bonusabsprache
Header Data
Released On
21.10.2010 08:01:20
Release Status
Released to Customer
Component
SD-BIL-RB-ENH Enhanced Rebates
Other Components
   SD-BIL-RB Rebate Processing
Priority
Normal
Category
How To
Product
Product
Product Version
SAP ERP Central Component
All versions
SAP R/3 Enterprise 4.7
All versions

How do i activate push notifications

I've just updated to 7.03, I constantly get a message to activeate push notifications in iTunes. How do i do this?

I had the same problem and found the following solution from LarryFilm in another thread. The only change that I would make is to specifiy that in Step 1, to logout, you click on your Apple ID, then choose Sign Out.
So frustrating until I found the solution below!
Eureka!! I have found someone with a smart, simple and efficient solution that actually works without all the hoopla (hard reboot/reset network settings/restore) suggested in this thread!
I have an iPhone 4 with iOS 7.0.3 and I went through those steps:
Go to "Settings">Scroll down to "iTunes Store & App Store">Logout from the account
Turn off your device, wait 1 minute or 2 then turn your device back on
Return to "Settings">Scroll down to "iTunes Store & App Store">Login (can take up to a minute)
And voilà! iMessage and FaceTime are back in business!
Note: it works without any need for a restoration.
This fixes as well all the problems in Google/Facebook/WhatsApp/etc. that require you to "Connect to iTunes to activate push notifications".
Thanks a lot to our fellow Apple Forumer Hunter Guerrero (see his valuable post here: https://discussions.apple.com/thread/5318138?start=75&tstart=0).

How to activate iTunes "dock notifications" again?

Hey there,
I upgraded to MountainLion 2 days ago and today I recognized that the "iTunes dock nofications" are missig...
These notifications poped up above the iTunes dock image when iTunes moved to the next song.
To activate this feature in Lion you used the terminal.app:
defaults write com.apple.dock itunes-notifications -bool TRUE
defaults write com.apple.dock notification-always-show-image -bool TRUE
killall Dock
Does anybody know how to activate it in MountainLion or even push the song information to the notification center?
Thanks a lot!
Plz: Don't mention Growl as an alternative

Some freeware called SizzlingKeys works like a dream, even on Mountain Lion.
http://yellowmug.com/sk4it/

How to activate WBS Element in Sales Order

Dear All,
How to activate WBS element in sales order?
Thanks & Regards,
PM

Basically in case of Repair and overhaul material is taking inside for repair purpose..for that we create service order in which we r creating component, operation(time. labor, machine) besides we create notification to allow overhead activity for this special activity..
once this service order r created and notification is set.. we r estimating cost for this process and updating sales price(DP82) which further send to customer for approval.. once v receive approval v issue a goods along with parental serviceable material to Plant for Plant maintenance estimation..
so all this procedure obey just like project , in this case we have to assign WBS element into sales order level..
WBS elemet is nothing simply its hierarchy which shows what r the steps followed in project(CJ20N)..
Correct me if i m wrong..
thanks
Mk

How to Activate the Table which Doesn't Exist - Can I create Table in SE11

Hi Gurus,
I am a BASIS Person ..so, I don't have much idea about ABAP Developement side . But, while applying patches to one of the SAP Component, I get the following error message ( usr\sap\trans\log ) :
Phase Import_Proper
>>>
SAPAIBIIP7.BID
1 ED0301 *************************************************************************
1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
1EEDO519X"Table" "WRMA_S_RESULT_DATA" could not be activated
1EEDO519 "Table Type" "WRMA_TT_UPDTAB_DSO" could not be activated
1 ED0313 (E- Row type WRMA_S_RESULT_DATA is not active or does not exist )
2WEDO517 "Domain" "WRMA_KAPPL" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCPER" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCVARNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RCLASV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_AMNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_INV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_OBJ" was activated (error in the dependencies)
2WEDO549 "Table" "V_WRMA_TRCLASVER" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLASVPE" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLPERCL" was activated (warning for the dependent tables)
2WEDO549 "Table" "WRMA_S_STOCK_SELECTION_DATE" was activated (warning for the dependent tables)
<<<
Now, I checked Domain WRMA_KAPPL in SE11 and it diplays that it is partially active :
" The obeject is marked partially active for the following reasons :
   Errors occured when adjusting dependent Objects to a change. Some of the dependent objects could not
   be adjusted to this change. To adjust the dependent objects, you must perform the following actions
   the next time you activate this object.
                    - SET THE SYNP TIME STAMP IN THE RUNTIME OBJECT OFALL DEPENDENT OBJECTS
My question is - how to activate this SYNP Time Stamp.. ?
                      - Once I activate this SYNP Time Stamp.. How do I activate this ..in SE11 or some other
                        TCode..
Any / ALL Help is highy appreciated and would be rewarded with appropriate Reward Points.
Thanks,
Regards,
- Ishan
>> Ok, Now I forcefully activated the Domain and then all the 5 Data Elements in SE11 ...now I have error
     that table WRMA_S_RESULT_DATA and WRMA_TT_UPDTAB_DSO Could not be activated...
     ..And in SE11 > Input the first / Second Table > Excute > Output : Table Does not Exist !!!
      - Now, How do I activate something which does not exist in the first place ?
    Any Input about this ?
Thanks,
Regards,
- Ishan
Edited by: ISHAN P on Jun 19, 2008 3:44 PM

Read note 1152612 - Incorrect component type in structure WRMA_S_RESULT_DATA.
The error occurs in Release BI_CONT 703 Support Package 9.
If you require an advance correction for Support Package 9, make the following manual changes if the InfoObject 0TCTLSTCHG is inactive in your system.
1. Use transaction RSA1 to call the Data Warehousing Workbench.
2. Check whether the InfoObject 0TCTLSTCHG was already activated by the compilation process the first time you called transaction RSA1. You can use transaction RSD1 to check this by entering 0TCTLSTCHG in the "InfoObject" field and choosing "Display". Proceed as follows if the InfoObject is still not active:
3. Go to BI Content activation.
4. Select "Object Types".
5. Open the "InfoObjects" tree and select "Objects".
6. Search for the InfoObject 0TCTLSTCHG and select it.
7. Transfer the object and activate it.
These steps activate the required component type /BI0/OITCTLSTCHG. You can check again in transaction RSD1 to ensure that the InfoObject 0TCTLSTCHG is available as active.
Jacek Fornalczyk

How to activate the ATP buckets in APO?

Hi,
We are in the process of changing the ATP buckets in our APO system.
I know the Path in the configuration:
Advanced Planning and Optimization -> Global Available-to-Promise (Global ATP) -> General Settings -> Maintain Global Settings for Availability Check
On the left side you will get three sections:
Global Settings
ATP Buckets (Active)
ATP Buckets (Planned)
I can change the values in (example field Shift Receipt Bucket) the ATP Buckets (Planned) section and save it with a transport. Now the question is how to activate the buckets. Is there another transaction for this? SAP Help doesn't specify how to activate.
Any ideas are highly appreciated.
Thanks,
Mahesh

Hi,
To activate the buckets one need to check the box 'Current' in the options under ATP Buckets (Active). Also, as referred earlier by Dipthi do look up the documentation under:
SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Settings for Global ATP -> General Settings for Global ATP ->Definition of Buckets for ATP Time Series ->Activation of Bucket Parameters for ATP Time Series.
The details are as beneath:
Use
If you change bucket parameters (see Definition of Buckets for ATP Time Series), these must be activated subsequently for the ATP time series.
Features
The system activates the bucket parameters in the following situations:
Since activation in each of the situations described below leads to downtime, you should change bucket parameters less frequently than other Customizing settings.
·        Creating the active planning version for a client using transaction /SAPAPO/MVM
If you set up a system again, you should process the bucket parameters before you create the active planning version. The bucket parameters are thus activated automatically.
·        Initializing SAP liveCache for all clients using transaction LC10
In the case of an upgrade, you should process the bucket parameters before activating SAP liveCache. The bucket parameters are then activated automatically.
·        Executing the report /SAPAPO/OM_ATP_REBUILD_TS
The system only rebuilds the ATP time series here.
In this case, the SAP liveCache administrator must execute the following steps:
                            a.      Shut down SAP liveCache.
                            b.      Replace the com-file registration:
                                                  i.       At command line level, go to the SAP subdirectory of the SAP liveCache installation.
                                                ii.       Under Microsoft Windows, save the original registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst), for example, by renaming or copying to another directory.
                                               iii.       Under Microsoft Windows, rename the registration file SAPAPO_REBUILD.lst as SAPAPO.lst (UNIX: libSAPAPO_REBUILD.lstas libSAPAPO.lst) or copy it to another directory.
                                               iv.       Under Microsoft Windows, rename the registration file SAPATP_REBUILD.lst as SAPATP.lst (UNIX: libSAPATP_REBUILD.lstas libSAPATP.lst) or copy it to another directory.
                            c.      Launch SAP liveCache.
                            d.      Execute the report /SAPAPO/OM_ATP_REBUILD_TS.
                            e.      Shut down SAP liveCache.
                              f.      Replace the com-file registration by replacing the registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst) with the original versions under Microsoft Windows.
                            g.      Launch SAP liveCache.
Regards
Vinod

How to activate Events Calendar Sample Application's Weekly and Daily View?

Does anyone know how to activate the Weekly and Daily View for the sample calendar application called "Events?" I am trying to generate, or incorporate, a calendar application based upon the sample application provided by Oracle. I have installed the sample application but I am unable to view the calendar in daily or weekly formats. Any assistance would be appreciated. Thanks in-advance.

Hi,
If the calendar was set up to only use the Monthly view, then you will be missing a number of items on your page.
The simplest thing to do would be to create a new calendar page in your copy of your sample app and then identify those items that are missing from your original page. These should be Monthly/Weekly/Daily buttons, Adjust Calendar Date - Monthly/Weekly/Daily processes and a hidden Pnn_CALENDAR_TYPE page item that holds the currently displayed type.
Andy

How to activate Image, Pdf, Hyperlink and Scale Prices in SRM-MDM

Hi Experts,
I have requirement to activate the following features:
1. Image
2. PDF
3. Hyperlink
4. Scale Prices
These should be activated and should be available in the current business' internal catalogs so that users could be able to easily identify the item they want to create.
Does anyone know the steps on how to proceed on these?
I have read and researched about this and I found out that objects should be imported in Data Manager and the link between items should be mapped in Import Manager.
I tried this first in Image, I was able to successfully import image. I tried adding the link first in existing item in data manager by right click on the Image field->Add/Link New... -> I was brought to the screen where I should add the image again, so I added ti again and there I was able to link the image and the item.
I understand that for the image to be available in the end-user's internal catalog screen, I should modify UI Configuration. So I added the Image field by going to Customize Display Tab-> and adding it in the Item Lists, Cart Preview, Compare, Item details radio button. But when I checked on end-user's internal catalog screen, Image column is still not there.
I believe PDF and Image has the same process. But how could I add the link between image and item for the entire catalog items?
Please also help on how to activate the Hyperlink and Scale price functionality.
Thank you so much!

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

I restored my iphone 4 using i tune and now it is asking for activation. How to activate it..?

I restored my iphone 4 using i tune and now it is asking for activation. How to activate it..?

Setting up and activating iPhone
To set up and activate iPhone, turn on iPhone and follow the Setup Assistant. The Setup Assistant
steps you through the setup process, including connecting to a Wi-Fi network, signing in with or
creating a free Apple ID, setting up iCloud, turning on recommended features such as Location
Services and Find My iPhone, and activating iPhone with your carrier. You can also restore from
an iCloud or iTunes backup during setup.
Activation can be done over a Wi-Fi network or, with iPhone 4S or later, over your carrier’s cellular
network (not available in all areas). If neither option is available, you need to connect iPhone to
your computer running iTunes for activation. You might also read http://support.apple.com/kb/TS3424

HT201407 How to activate my i pad 2 after restoring

how to activate my i pad 2 after restoring

Full Error is
"Activation Failed
This iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement."
The device has not been jail broken nor has my computer jail broken any devices. The device was working fine on wednesday and I did a restore and wipe, to switch from one user in the family to another. When I went to restore, I received this error. I have been through the restore and update process (says updating firmware, etc.) but at the end of the process I get the same message.
My big concern is this is an iPad 2 I bought new years ago and I'll be upset if the Apple Store folks say, "sorry, hardware issue."
Dan

How to activate video calling from account page?

On a new computer Windows 8.1 can sign into my Skype for Desktop Account using skype name and password. Also have same email address as before. Account page comes up but dont know how to activate Skype so I can video call. Tried to instal Skype & got as far as Save Skype to File box, clicked on this, then was expecting to see Run Installer but nothing happened. Was previously using Windows XP. Have the original Skype download filed. Plus several more where I have been attempting to resolve this problem. Am all ´skyped up´ but cannot use it !!
Absolutely desperate have been trying to remedy this for ages. can anyone help please. Thanks Deborah
Solved!
Go to Solution.

Well, if it hasn't successfully installed yet, then you won't be able to uninstall it. So with that in mind, if you are able to uninstall it then that would explain why you can't install it again. The program won't let you install it if it's already been installed. So if you'd like to try again you can uninstall it and reinstall from one of the files you downloaded.
So, the first step would be to see if it is currently installed. To do this, right click the Start button in the bottom right corner while in Windows desktop. You will see a context menu pop up. From there, choose Control Panel, and within Control Panel choose Uninstall a program. You will see a list of currently installed programs.
If you see Skype in the list, uninstall it. If you don't, then don't worry about it - it's not installed. Now try to install it again.
With regard to User Account Control, don't worry about that at all. It is safe to click Yes, and once you do that should initiate the installation process. User Account Control (UAC) is a warning that something want approval from a computer administrator, which gives it access to parts of the computer it would not have otherwise. You probably don't want to give administrator access to programs you do not trust, but Skype is made by Microsoft so there is nothing to worry about.
Let me know if this helps you, or if you have any more questions. Good luck!
P.S. You said the Skype installation file came from your XP computer - that may be a problem in itself. When you download Skype from the website there is a pretty good chance that it checks the version of your operating system before downloading, meaning that if you downloaded it on a Windows XP computer you may have downloaded a Windows XP version that will not work on Windows 8.1. So, if you are using a file you downloaded from that computer, just download it again from the new one. You can use the link I put in the first post.

How to activate & process Notification

Similar Messages

Maybe you are looking for