How to add a default user group for multiple document type's?

Hi,
I am trying to add same default user group for different document types when MA is created. Is there any way to setup using a single "Document Security Template"? Or I need to create different templates for different document types?
Please confirm.
Thanks,
Saloni

Hi Saloni,
Based on what your specific requirement, it might be easier to do it with scripting.
If you are doing it using Document Security Templates, you would have to create a Document Security Template for each of the 6 MA types and assign the default group. Create another one and leave the Document Type field blank, so it will apply to the other 4 MA types that don't have a default group.
Regards,
Vikram

Similar Messages

Service group for particular document type or Purchase Organisation

Dear Gurus,
I want to add service group as like Material group. but my objective is to restrict those service group for particular document type or Purchase Organisation??
Is it possible, if so please advice me the SPRO Settings
Thanks
RS

Hi,
Basically, this task (both customized table activation via SE11 transaction and user exit activation via SE37 transaction) will be done by ABAPer. All you should do is to prepare the functional specs document in which you require -
1)   A generation and activation of the customized table which consists of at least four columns -
     a)   Purchasing Organization;
     b)   Purchasing Document Type;
     c)   Material group/service group
     d)   Purchasing Document Creation Date
2)   A coding and activation of the related function module (You can use SMOD transaction to view the enhancement MM06E005 to view related user exit).
Cheers,
HT

Default Purchasing organisation for Purcashing Document type

Dear Gurus,
I need to make default Purchasing organisation for Purcashing Document type. How to configue this. Please advice me.
Thanks
RS

Hi,
You can do it with Personal Setting option which is available in purchase order header level.
Click on this button, Go in Defaults Values.
Enter material type, purchasing org. and other required detail.
Then always at the time of purchase order creation you got same material type and purchasing org.
Note: You can do it for only one material type and purchasing org.
Regards,
Mahesh Wagh

How to create a New user group for AD-HOC

when i select a work area for ad-hoc i dont find any exisitng user groups...
i get a blank screen with an error saying no usergroup
is there a possibility to copy these across clients?
pls advise
thanks

Hi,
sorry but my english isn't the best so i try an answer again and hope i'm on the right way:
Step by step guide for example client 100 and 200 on the same system. System 100 has usergroup test001 and client 200 has not.
1. call sq03 in client 100
2. pick the transport truck
3. pick radiobutton [Export] and and radio button [Transport user groups] fill in the field [User groups] with test001.
4 Execute and write(copy to clipboard) down the transport number
5 logon to client 200
6. call sq03
7.pick the transport truck
8. pick radiobutton [Import] and radio button [Transport user groups] fill in the field [Dataset with imports] with the transport number.
9. Execute
After that your user group should be in client 200.
If you want to transport between different systems you have export the transport request first.
Regards
Bernd

How to add custom infotype in ALE for HRMD_A message type

Hi Friends-
Pls help me for our req we are using HRMD_A Message Type for HR master data but now we need to add one custom infotype ( 9902 ) also in standard ALE filters for this message type how i can do that pls let me know ?
<<removed_by_moderator>>
Regards
Meeta & Glory
Edited by: Vijay Babu Dudla on Dec 14, 2008 11:38 PM

Hi
Thanks for your support,
Pls let me know which steps i should go ? my secanrio is inbound side only,
step 1 ) Define idoc extension for HRMD_A01 using WE30 transaction and define it in partner profiles
step 2) do i need to write some code in BADI also to update information for my custom infotype also if yes then where and which BADI pls let me know ? because already am working on one badi HRALE00INBOUND_IDOC for few validation for incoming data.
step 3 ) add this new custom infotype in my standard ALE filters.
Pls let me know if am mistaking some where or if i have to do some thing else ?
Regards
Meeta & Glory

How to pass the User Group for a SQ00 Transaction iView

Hello,
To start off, I am relatively new to SAP technology in general. I may be missing something obvious.
I am trying to create an SAP Transaction iView in our EP Portal that will call the SQ00 transaction (start query) and run a particular query against our R/3 backend. I set the Transaction Code to: SQ00, the application parameters to: RS38R-QNUM=<my query> and the OK Code to: SHOW and the System to the System alias for our R/3 system.
My problem is that the query that I need to run is not in the default User Group that comes up by default. So I get a screen that has the query field (RS38R-QNUM) correctly populated but the error that the query has not been created. From that screen I can navigate to the correct User Group and then run query. There does not seem to be a User Group field on the screen, you change it by accessing a different menu, so I do not know how to call the screen for a particular User Group.
Is their an application parameter that I can initially pass to set the User Group?
Thank you.

And my lecturer is suck, every lectures she just read
the slices and never explains why and how they are.
(If ask her, she talks and talks rubbish and
eventually I get nothing)Maybe you should drop the class and complain to the administration.

How to add a default value in a site column for every item in a document library

HI
i created a content type with some site columns ,
and included in a Document library.
Process ( content type)
-ProcessNo
-ProcessName
after that i uploaded 100 Documents but not added value in a site column process name.
now how i add a default value in a site column for every document in a document library
adil

HI
i get below error when i change the script
PS C:\scripts> C:\Scripts\updatedefaultvalue.ps1
Cannot index into a null array.
At C:\Scripts\updatedefaultvalue.ps1:8 char:7
+ IF($i[ <<<< "Title"] -eq $null)
+ CategoryInfo : InvalidOperation: (Title:String) [], RuntimeExce
ption
+ FullyQualifiedErrorId : NullArray
$web = Get-SPWeb http://tspmcwfe:89/
$list = $web.Lists["test"]
$item = $list.Items | Where { $_["Name"] -eq "Emc" }
foreach($i in $items)
IF($i["Title"] -eq $null)
$i["Title"] = "test"
$i.Update()
adil
Why are you piping a where in the items? Do you only want to add the "test" to ones matching
a name?
If you have ISE installed on your server I recommend you put your code in there and debug it.
If this is helpful please mark it so. Also if this solved your problem mark as answer.

How to create a valid database User/Group for installing Linux 5,3

HI:
I am trying to install E-Business Suite on LINUX and gave me the following error report
Unable to validate Database User/Group :oralce /dba
Provide a valid Database User/Group for the installation.
when I was installiing on Windows, it did not gave me this error.
How do I have to crate a user/Group to install eBusiness on my Linux/
Please help
Ali

Hi user;
hi Ali;
Yes I run as a root userKeep using root
When I use the following at the terminal
It gave me a error message
" Provide a valid Database User/Group for the installation. "
Here is what I type at the terminalIts seems normal becouse u try to create same user!
root@vis groupadd dba
root@vis useradd -g dba -d /home/oracle vis
root@vis useradd -g dba -d /home/oracle oracle Try this plz:
groupadd dba << i think this group already created!
useradd -g dba -d /home/applmgr applmgr << for apps node
useradd -g dba -d /home/oramgr oramgr << for db node
As you notice we define 2 different user under /home path!
Regards
helios

How to create user group for EIS (Executive Information System) KCBA

Dear Experts,
How to create user group for EIS (Executive Information System)
TCode KCBA
Regards
Saurabh

Hi ,
Check the below link ,hope it will give some inputs for creating groups.
http://help.sap.com/saphelp_470/helpdata/en/5c/c1c81c445f11d189f00000e81ddfac/content.htm
Regards
udayakumar.k

How can we provide access/provide permissions to a user/group for group of folders at single step??

Hi Nico, Thaks you so much for your reply,, Can you please advice or give me some steps to write script pelase? Regards,Kareem

Hi All, How can we provide access/provide permissions to a user/group for group of folders at single step?? I can able to provide access for a single folder at a time. I want provide access to a list of folders( more than 30 ..) at single step?? Regards,Kareem

Add userid to user group in Windows Vista OS

The operating system is WINDOWS VISTA on my machine. I successfully installed Oracle 10 R2 10.2.0.3 and upgraded it to 10.2.0.4.
I have the following issue after upgrading to 10.2.0.4:
From the DOS command prompt, I ran as "Run as Administrator" and then did I did sqlplus /nolog.
I have the following issue when I CONNECT / AS SYSDBA:
When I do sqlplus /nolog and CONNECT / AS SYSDBA, I get the following error:
SQL> connect / as sysdba
ORA-01031 insufficient privileges
{color:#0000ff}I should be able to CONNECT / AS SYSDBA without using the SYS password to do exports and imports.
Oracle suggests that I could ADD my userid on my machine to the ORA_DBA group (Windows Group) and this could fix the issue.
Please let me know where I can find the ORA_DBA group (Windows Group) in WINDOWS VISTA.
How do I add my userid to the ORA_DBA group in Windows Vista?
{color}
Thanks!

Duplicate Thread.
Add userid to user group in

How to Set A Default Start Time For New Events In Calendar?

How to Set A Default Start Time For New Events In Calendar?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

User Groups for Queries

All,
I have a user that gets a message stating that they are not assigned to any user group when using t-code SQ00.
I have checked and the profile they are assigned to has rights to run SQ00 and I have also checked SQ03 and I do have her assigned to query groups.
Am I missing something? I've been administering users for years and have never had one with a problem like this. All the usual areas are fine.
Thanks for you help!

i have to apologize - i didn't read your post carefully - my mistake.
does this also happen when parameter AQB in SU3 is set to a default user-group?
have you checked whether infosets are assigned to that particular user-group?
Edited by: Mylene Euridice Dorias on Feb 13, 2008 5:18 PM
i'm editing this: i have just been testing. is the infoset assigned to that usergroup properly generated?

Default User Group in SAP Query (SQ01)?

Hi,
Is there a configuration or parameter to set so that when starting SU01 it will open a certain User Group by default, e.g. Z1234? Clicking the button "Other User Group" is tedious for end users.
Thanks, will assign points.

Unfortunately those steps take you to SQ03, "User Group: Initial Screen". There is no option in SQ03 to set a default User Group, either.
Any other ideas?
I tried searching for parameters in SU01, but there isn't a suitable parameter.
Advice welcome

Security permission to user Group for menuitem in ax 2012

Hi experts,I have a query,
Query is that i want to give menu item level permission to user group,for e.g i want to show accounts Payable
all set up parameter to Finance Group,so how it can be done? i don't want to use Roles--->Duties------->Privileges method,
I want to just create two groups for one ACount Payable set up parameters will be showed on main ,and for
other group it was disable?
is that possible with out creating new roles ,duties and then privileges procedure?

Hi Munsifuv. You might get more help on this and your other AX questions on an AX-specific forum. We can help with connecting Power Query to data sources, but aren't necessarily experts on configuring those sources.
Thanks,
Ehren

How to add a default user group for multiple document type's?

Similar Messages

Maybe you are looking for