How to add a new Field to the WEB User Interface in CRM 2007

Dear experts,
I have been struggling to add a new field to the (CRM 2007) user interface from available fields for a specific view.
I have maintained settings in BS__WD_CMPWBàRuntime Repository editoràComponentàViewàConfigurationàNew ConfigurationàAvailable FieldsàField Propertiesàand save.
But the field is only appearing in display mode in the Web UI, which doesnu2019t allows any user input.
I need your help to resolve the issue, I would be grateful if you could provide step-by-step documentation with screenshots or any other kind of documentation.
Each suggestion will be appreciated.
Best regards,
Raghu ram.

Hi Raghu Ram,
I think you added a new custom field using some method like EEWB etc.,
Then, you are adding the field onto the UI using UI Configuration Tool .. right ?
These are the steps to diagnose:
Method 1.Check the field properties in the model browser first.
It should be showing 'C' i.e., CHANGEABLE. If it is showing as 'R', it is only READABLE.
In such a case you need to find a BADI to change the field properties.
For example, in Marketing Applications OBJ BADI has a method CHANGE FIELD PROPERTIES for this purpose.
Method 2. Debug and check what is the value coming for RV_DISABLED parameter in the GET_I method in BSP_WD_CMPWB. This should be FALSE.
Method 3. Check what are the field properties in the UI Configuration tool.
Make sure it is not a display only field.
Regards,
Masood Imrani S.

Similar Messages

How to Add a new Field in the Web UI

In CRM.
I want add a fields. How it is Possible.
In WebUI after login. Select BP_SRV_MAIN.
Then Select Manage Reports.
Select New Entry.
Porivide Program Name.
            Short Description.
            Select Service from Drop Down.
Select Tables Radio Button.
Press Next.
It display all available FIelds.
But i want add another some fields into this. How it is possible.
Here i am getting   Component Name as CRMCMP_OR_DTWIZ.
                            View Name as    RptColumns.
So How can i get more fields like ObjectID of CRMD_ORDERADM_H.
Can you please explain me about this. If possible with Screen Shorts.
Thank You.
B. Krishna

If you want to add extra standard fields (like one you mentioned), you can use Component Workbench and Copy the configuration and create your own configuration and make the "Available Fields" appear there.
If the standrd field is not available, you can Add Context Node using wizard and make it visible.
If its a custom field (a new one); you will have to use EEWB and add the fields and then make it visible in the UI using Component Workbench.
Regards,
Alin

How to Add a new fields in the selection screen of LDB.

Hi All,
I want to add a new fields in the selection screen of LDB & then i need to select the data for that fields.
So could you please tell me for that where i need to add the code for selecting the data.
Thanks
Roli

Hi
welcome to SDN forum
If you are designing your own LDB with your own tables you can define tree structure and then the selection screen for the tables
if you wants to modify the std LDB of SAp means take the access key and to modify that code
if you add the extra field you have to modify the where conditions in the code also
see the doc
A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
LDB offers an easy-to-use selection screens. You can modify the pre-generated selection screen to your needs. It offers check functions to check whether user input is complete, correct, and plausible. It offers reasonable data selections. It contains central authorization checks for data base accesses. Enhancements such as improved performance immediately apply to all report programs that use the logical database.
Less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
Mainly we used LDBs in HR Abap Programming.
Where all tables are highly inter related so LDBs can optimize the performance there.
Check this Document. All abt LDB's
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fabap%2fabap-code-samples%2fldb+browser.doc
GO THROUGH LINKS -
http://www.sap-basis-abap.com/saptab.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Re: **LDB**
www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
www.sap-img.com/abap/abap-interview-question.htm
www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
Gothru the blog which provides info on LDB's:
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Sample code
TABLES: SPFLI,
SFLIGHT,
SBOOK,
SCARR.
START-OF-SELECTION.
GET SPFLI.
WRITE:/ SPFLI: , SPFLI-CARRID, SPFLI-CONNID,
SPFLI-AIRPFROM, SPFLI-AIRPTO.
GET SFLIGHT.
WRITE:/ SFLIGHT: , SFLIGHT-CARRID, SFLIGHT-CONNID, SFLIGHT-FLDATE.
GET SBOOK.
WRITE:/ SBOOK: , SBOOK-CARRID, SBOOK-CONNID,
SBOOK-FLDATE, SBOOK-BOOKID.
GET SFLIGHT LATE.
WRITE:/ GET SFLIGHT LATE: , SFLIGHT-FLDATE.
Regards
anji

How to add an input field in the web UI of CRM 2007

Hi everybody.
I want add an Input field in the Web UI Screen. How it is possible.
I want get the information with detailed descriptions if possible with screen shorts.
What type of methods it will be generated and what are the code we entered in those methods.
Take according to any example. But with detailed description.
I am new for the CRM 2007. So, please give the screen shorts with proper data.
Not only adding the field. If any data i entered in the adding field then that will be stored in the tables otherwise no use by adding the field.
So, Can anybody please send a proper information according to this.
Here another one How to Add our own table (Ztable) field in the Web UI Screen.
How to add the same field in the BOL.
Please expalin about those concepts with full of screen shorts messages.
Thank You.
Regards,
Krishna.

If you want to add extra standard fields (like one you mentioned), you can use Component Workbench and Copy the configuration and create your own configuration and make the "Available Fields" appear there.
If the standrd field is not available, you can Add Context Node using wizard and make it visible.
If its a custom field (a new one); you will have to use EEWB and add the fields and then make it visible in the UI using Component Workbench.
Regards,
Alin

How to add a new field on the right side of 'Part function' in Opportunity

HI All
I have a requirement wherein I need to add a new field for 'first name/last name' on the right side of 'Partner function' field in opportunity search criteria..
Ex:(here i'm showing overview how the search criterial screen appears in UI since i can't attach screen shot)
Partner function is sales lead firstname/lastname
It is similar to...when we select the option 'Is between' for date field then automatically one extra field will appear
on the extreme right to enter a range for the date so similary I need to add one field to the extreme right where
the user will select 'first name/lastname' using 'F4' help in addition the abvoe 'Partner function'.
Could you please let me know how can we add it??
Regards
Anil

Hi,
First try to find out if you already have that field available in your view configuration. If yes, then you just need to add that to visible/displayed fields. Other wise you'd have to extend the context nodes using AET/EEWB. After you add the fields using configuration you can move them where ever you want to place them. I believe for first name/last name F4 comes by default.
Regards
Prasenjit

How to add a new field in the cube and load data

Hi,
The requirement is
We have ZLOGISTICS cube , the data souce of this filed has REFDCONR-reference dcument number filed . We have to create a new field in cube load data and get this new filed into the report also.
Please any one can help me with the step by step process of how to do?
How to get the data into BW and into the report.

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

How to add a new field in the Field Mapping

Dear Freinds,
               I have two un used fields in the Source fields to the Target Fields ,
i have to add the 3   fields which r there in the my source fields to that
of the target fields ( as per the change in the requirement) in the 5th Step
i.e Maintain Field Mapping and Conversion Rules
the Target strucutre & the Source fields( by clicking the button
Source field and selcting the fields from the popup menu) in the mapping and conversion step ,i want to add 3 fields which are availabe in the list of th source list which i want to map to the Target strucutre .
When i tried it is adding in the othe target field
presently i have mapping (5th sept ) as below.
   ZPA30_08                       LSMW
       Fields
           TABNAME                      Table Name
                               Source: ZP0008_STRC-PERNR (Personnel Number)
                               Rule :   Default Settings
                               Code:    ZPA30_08-TABNAME = 'ZPA30_08'.
           TCODE                        Transaction Code
                               Rule :   Default Settings
                               Code:    ZPA30_08-TCODE = 'PA30'.
now i want to add 3 fields Pernr,wage type and Amount , but when iam trying it is
getting and saved in the TABNAME .
How can i map please let me know .
Regards
syamla

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

How to add a new field to the Quote: Shipping and Bill Tab Payment region

Hello All,
We have a requirement to add payment description column to the Payment Region of Shipping and Bill tab in Quoting User(Quote Page).
We have extended the View object HeaderPaymentsVOObj and created a custom view object, then created and ported the substitution.
In Quotes page, 'Shipping and Bills' tab Payments region, we have created a new item(Payment Description), assigned the custom View object instance and attribute to it.
We are able to enter and update the payment details before substitution, but after substitution while entering payment details we are facing the below error.
At most one payment record can exist at quote header/line level.
Help and inputs are highly appreciated.
Thanks in advance.
Regards,
Supriya.

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

How can you permanently add a new field to the Advanced User Search?

We have a number of USR UDF attributes that need to be used in the Advanced Search: Users window. These will be used very often so we would rather not require our Admins to have to select the Add Fields button, scroll down to the attribute they want, then enter the value to search on. We would much rather modify that Advanced Search screen such that the custom attributes we want to search on are listed permanently on that screen. I think there is a way to configure this but I just can't seem to find it.
Any help would be much appreciated.
Thank you.
-Dave Herrmann

The first suggestion here, http://docs.oracle.com/cd/E21764_01/doc.1111/e14308/conf_mangmnt.htm#CHDIEFGD, only allows me to add the UDF attribute to the Add Fields drop down list. It doesn't put the attribute on the screen by default. I was trying to avoid having our Admins select that attriubute from the Add Fields drop down list since they will be searching on this attribute pretty much all the time.
The second suggestion was to open up one of the OIM jar files and modify an xml file and then zip it back up. This will be overwritten on each OIM Bundle Patch so I really don't tlhink we can use that approach.
So, this is it? What I'm trying to do can't be done through a standard lookup change or something?
-Dave
Edited by: user552098 on May 2, 2012 8:39 AM
Edited by: user552098 on May 2, 2012 8:40 AM

How to add a new field to the notification mail

Hi All,
We want to add the description of the GOA to the notification mail. Currently when an approval is required the following mail is sent:
#CONTRACT.VERSIONTYPENAME# no.#CONTRACT.OBJECT_ID# was designated for release by employee#CONTRACT.CHANGEDBY#.
You are responsible for checking this decision and then either approving or rejecting it.
*To log on to the system, click the following link:
So there is only the document number, document type and last changed by information in the notification mail. How can we add the description of the document?
We have checked the related container and could not find the description of the document.
Awaiting your reply

Hello Emre,
the mail is generated by report RSWUWFMLEC. You have to modify this report to change the mail text.
An easier way might be to change the subject of the mail which is generated from the workflow task. You can enter the description of the GOA in the workitem text of you active workflow (WS14000088, task TS14007969?).
Best regards,
Karsten

How to add a new field in MM01, with say contaminent as a field?

How to add a new field in MM01, with say contaminent as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?

Hai venkateshwar reddy ,
try with these user exits
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Refer these steps also
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717#

How to add a new field in predefined report output

HI,
how to and where to search for the filling of "fieldcat table" in the predefined ALV report.
So that i can add a new field in the output of a predefined report

Hi
Try to check where the fm REUSE_ALV_FIELDCATALOG_MERGE is used in the report.
Max

Add a new field in the Tab Addicional data en la ME22N

Hi,
Please, can anyone tell me how can we add a new field in the tab Addicional data en la ME21N? I have to use the MM06E005, but I don't know which screen exit should I use and also how to add this subcreen in the tab Addicional data.
Thanks in advance.
Saida.

Hi,
using SE80 you can add your fields with subscreens
SAPLXM06 0101 for Headerfields
SAPLXM06 0111 for Items.
This will add a tab in ME2..N.
if you want your own Text on the tabstrip just edit the Textsymbols
101 and 111 from SAPLXM06.
At output you have to open a module asking the gl_aktyp to switch edit/display mode.
then you must code the Exits to import/export values
EXIT_SAPMM06E_006
store transaction type for later modification of screen attributes
gl_aktyp = i_trtyp.
gl_no_screen = i_no_screen.
store current state of customer data in ekko_ci (structure for screen)
ekko_ci = i_ci_ekko.
store reference document
if i_rekko-ebeln ne gl_rekko-ebeln and
not i_rekko-ebeln is initial and
gl_rekko-ebeln is initial.
ekko_ci-zzemail = i_rekko-zzemail.
gl_rekko = i_rekko.
endif.
EXIT_SAPMM06E_007
move-corresponding i_ekko to gl_ekko_ci.
EXIT_SAPMM06E_008
e_ci_ekko = gl_ekko_ci.
ekko_ci contains the actual values of the Dynpro fields
e_ci_update is only set if you really want the fields
on the Dynpro to be saved. You must set it then to 'X'
the field ekko_ci-zzflag will here only be saved if there
was a change and the transaction is not in display mode
if gl_ekko_ci-zzemail ne ekko_ci-zzemail.
e_ci_ekko-zzemail = ekko_ci-zzemail.
if gl_aktyp ne 'A'.
e_ci_update = 'X'.
endif.
endif.
Regards
Kiran Sure

Hi All ,How to add a new field for MEDRUCK if we havea ZMEDRUCK

Hi All ,
        How to add a new field for MEDRUCK if we have a ZMEDRUCK
Req: If I want to add a new field for the following text editor line :
IN MAIN WINDOW > TEXT EDITOR> SERCH FOR TOTAL_AMOUNT-->
In that we will have
&ekko-waers&    &komkfkwrt&
(currency)       (numerics)
Pls send the Code to make these changes .Pls its urgent
Thanks&Regards.
Bharat.

Hi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
<b>Reward points for useful Answers</b>
Regards
Anji

How to add a new Field to the WEB User Interface in CRM 2007

Similar Messages

Maybe you are looking for