How to add an upbeat note at the beginning of song?

At the beginning of some songs you have that first up beat before the first down beat of a 4/4. Is there a way to add this on an ipad version? Thanks for your help!

Hi Vamsi,
There are a few options ...
1) The one suggested by Prasanna
2) Loop through all rows via JavaScript and use the GridObject methods to set cell values and then perform an applet.refreshGrid( false )
3) Apply an Inline transform
4) Use a stored procedure to return the results and the totals as one recordset.
The stored procedure would be the fastest for runtime.
The Iniline XSL transform would be the second fastest.  If you specify the XSL in a generic way, you may even be able to reuse it in other scenarios.  If you hardcode the fields in the XSL, it would be a matter of simple code adjustment when you encounter a similar scenario.
Hope this helps.
Cheers,
Jai.

Similar Messages

  • Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

    Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

    Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.

  • How to add sign in screen at the beginning of training presentation

    Hello Captivate users
    Does anyone know how to add log in or a screen that captures the name of person doing the training so you can see who has done the training?
    Kind Regards
    Nat

    Hello,
    Welcome to Adobe Forums.
    You can use Text Entry Box and Text Caption to create a login screen.
    Once you add a Text Entry Box, a variable will be assigned with it (for ex : Text_Entry_Box_1), you can use that variable to capture the name of the person who views the project's published output.
    Thanks,
    Vikram

  • Add a new line at the begining of a string in a Xquery ALSB3.0

    Has anyone figured out how to Add a new line at the begining of a string in a Xquery in ALSB3.0?
    Thanks for your Help.

    I believe this is related to BI Publisher. Any comments would be greatly appreciated.
    Thanks,
    Sinan

  • How to add A single row at the middle of the table in a Webi report

    Hi,
         I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
                                                    Thanks in advance
    Regards
    Monika

    Hi Monika,
    It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
    Can you explain in more detail what you are trying to do?
    Thanks

  • How to add a radio station to the library

    just loaded itunes 6 (windows box) and can't find out how to add a radio station to the library

    If your current stations in WMP are .pls or .m3u URL's, they may work in iTunes also. Use the "Open Stream" command from the Advanced menu and put in the URL that includes .pls/.m3u. If the URL is a .mwv variety, those are Windows proprietary format and not supported by iTunes. Same with .ra streams (Real Audio).
    .pls & .m3u usually indicate MP3 based streams supported in iTunes. It's up to the original radio station/streaming site to select the format and make it available. Shoutcast.com & Live365.com are great resources for mp3 based streams.

  • How to add a excel driver in the Adminstrator tools

    how to add a excel driver in the adminstrator tools > odbc Datasource,
    I have to add the name and excel sheet location in the SystemDsn but whiling finishing the stups i will get the error like
    error found could not found the registery.
    ,So is there any other setting is required while i am adding in the excel driver
    please help me out for this ,this is 1st time am using the excel source in the report data source..

    I'd ask them over here.
    Windows forums on Microsoft Answers
    Office Excel forums on Micrsoft Answers
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • How do i add section on page to the beginning of a document

    i have finished a pages document but i need to add a  new section at the beginning of the document how do i do this?
    and how do i flatten my document so everything in anchored down and not moving

    Assuming Pages v5 on OS X, you place your pointer at the top of your document, and then Insert ▸ Section. You can verify this by View ▸ Show Page Thumbnails.

  • [SOLVED] How to add modules to build with the kernel?

    Hello i´m trying to learn how to build my own custom kernel and doing it the arch way https://wiki.archlinux.org/index.php/Ke … raditional. But unfortunately dm-crypt was not included in the kernel so it all failed.
    svart_alg% sudo mkinitcpio -k 3.15.6 -c /etc/mkinitcpio.conf -g /boot/initramfs-test.img
    ==> Starting build: 3.15.6
    -> Running build hook: [base]
    -> Running build hook: [udev]
    -> Running build hook: [autodetect]
    -> Running build hook: [modconf]
    -> Running build hook: [lvm2]
    ==> ERROR: module not found: ‘dm-snapshot’
    -> Running build hook: [encrypt]
    ==> ERROR: module not found: ‘dm-crypt’
    -> Running build hook: [block]
    -> Running build hook: [filesystems]
    -> Running build hook: [keyboard]
    -> Running build hook: [fsck]
    ==> WARNING: No modules were added to the image. This is probably not what you want.
    ==> Creating gzip initcpio image: /boot/initramfs-test.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    I have never don any of this before and have no idea of how to add a missing module to the kernel i´m building. So i search on internet and had a very hard time finding a good guide for this but i fond one possible solution. https://www.kernel.org/doc/Documentatio … odules.txt
    svart_alg% make -C /home/nigro_alko/Kernel/linux-3.15.6 M=/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in
    make: Entering directory ‘/home/nigro_alko/Kernel/linux-3.15.6‘
    mkdir: cannot create directory ‘/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in’: Not a directory
    scripts/Makefile.build:44: /home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in/Makefile: Not a directory
    make[1]: *** No rule to make target ‘/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in/Makefile’. Stop.
    Makefile:1310: recipe for target ‘_module_/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in’ failed
    make: *** [_module_/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in] Error 2
    make: Leaving directory ‘/home/nigro_alko/Kernel/linux-3.15.6‘
    So is there any one that have time to help a lost little newbie i would bee very happy  :-)
    Last edited by Moosey_Linux (2014-07-29 15:00:40)

    karol wrote:Why do you want a custom kernel in the first place?
    Moosey_Linux wrote:i´m trying to learn how to build my own custom kernel
    Reason enough IMO. But anyway... you refer to the Traditional build method in the wiki, but is it possible you didn't really read it? Or maybe you only skimmed it? Did you run make menuconfig? Did you try to build everything in instead of using modules? That mkinitcpio output suggests that you did.
    As suggested there for first-timers, it's a good idea to start with a kernel configuration that is known to work - the Arch config is the obvious choice, but there are other sources e.g. http://kernel-seeds.org/ .

  • How to add more summary data in the MIP of Compensation workbench

    Hi all,
    In the MIP (incentive plan) of the compensation workbench, we need to add more summary data in the summary section. I checked that all the summary data in that section are stored in the table 'ben_cwb_summary'.
    Even we can change the VIEW object for that page (using extension), we can't retrieve it because the new summary data/information we need to add are not stored in the table 'ben_cwb_summary'. We need to write our query to summerize data.
    How to implement it?
    Thanks in advanced!
    Jane

    faiz2000 wrote:
    > How to add more one record in the same time?
    >
    > Please I need your help to add more one record in the
    same time, how can I do
    > that?
    >
    > I have only one text field and the value it is linked
    from other table, if
    > user he bushes bottoms the all data it will copy it to
    new record:
    >
    > Ex.: <input name="textfield" type="text"
    >
    value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
    >
    >
    Use "Repeat Region"
    Mick

  • How to add a document type for the residence status GB in infotype 48

    Hi Team,
    How to add a document type for the residence status GB in infotype 48.
    Please answer this  at the earliest.PFA screnshot.
    Thanks
    chris

    I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
    In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
    A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
    When a relationship is created you may watch it also from either end (again INFO is the starting point).
    It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

  • CWB: how to add more summary data in the summary section

    HI All,
    We need to add more summary data in the summary section. Some summary data need to calculated dynamically like (summary data A /summary data B).
    under the worksheet, there is a link:
    Personalize Dynamic Columns
    But this link allows to create Dynamic Columns for the worksheet, but not for summary setion.
    Is any way to add more summary data in the summary section through personalization instead of customization (VO extension)?
    Thanks in advanced!
    Jane

    faiz2000 wrote:
    > How to add more one record in the same time?
    >
    > Please I need your help to add more one record in the
    same time, how can I do
    > that?
    >
    > I have only one text field and the value it is linked
    from other table, if
    > user he bushes bottoms the all data it will copy it to
    new record:
    >
    > Ex.: <input name="textfield" type="text"
    >
    value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
    >
    >
    Use "Repeat Region"
    Mick

  • How to add a standard field to the Product search criteria ?

    Hello all,
    despite my searches on google and sdn, i'm still  confused on how to add a standard field in the search criteria of the Product seach screens (component/view PRD01QR/Search for example) , I mean a standard Product field that is not included in the available fields list in the UI configuration tool.
    I found some explanations for adding a specific Z-Field, this is ok , but I'd like to add a standard field as a search criterion, namely the item category group.
    Could someone give me the needed detailed steps for this?
    thanks
    Ludovic

    Hi
    Chk ths link out :
    http://wiki.sdn.sap.com/wiki/display/CRM/Howtoaddanexistingfieldtoasearchpageofadifferent+component
    Rgds,
    Swati

  • How to add a new tab for the project?

    Dear All Experts,
        Could you tell me how to add a new tab for the project?
        Pls refer to the screenshot as below:
    Thanks!
    Xinling Zhang

    Hi,
        The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
        And in cj02, there is no this tab also in the wbs detailed screen,
    Thanks!
    Xinling

  • How do I move my notes in the "On My IPod Touch" folder to the "iCloud" folder?

    How do I move my notes in the "On My IPod Touch" folder to the "iCloud" folder?  I don't see where or how they are being backed up and want to make sure that they transfer to my new device.

    Hi,
    I will recommend you to get a Mobile Me account, it can sync multi devices like an iPod Touch / iPad / iPhone, of course, included your computer flawlessly.
    For details, you can refer:
    http://www.apple.com/mobileme/
    If you not prefer to get a Mobile Me account, you can sync both devices by using computer.
    First of all, make sure the iPod Touch have not been ever synced by other computer. Otherwise, all the notes and contacts in your iPod Touch will be replaced by your computer information. (or iTunes will ask you to merge all the info, some data lost may occur.)
    Connect your iPod Touch to the computer, in the iTunes, your connected iPod Touch will be shown on the left column, select it, on the right hand side is showing your iPod Touch details. Then, select "Info" tab (on top), check "Sync Address Book Contacts" and "Sync notes" in the "Other" section. Then click "Sync"
    Suppose the selected / checked option will be synced. After sync is complete, eject your iPod Touch, connect your iPad, do the same setting as you did for your iPod Touch, and sync it.
    E.

Maybe you are looking for