How to add attributes in Data Column for automatic changes
Hello everybody,
Could you give me an advice?
I have characteristic and attribute assigned to it.
I want to make what when i change characteristic(variable) its attribute in planning layout changes too. So in planning area window in <b>Characteristics Rels</b> tab i made "<i>Derivation, Combination Check and Proposal</i>" with main characteristic and its atribute. Everything works fine, but problem is, that attribute can be only in <b>Header</b> or in <b>Lead column</b>.
In planning layout i want to add what attribute in data column.
Maybe where is other solutions?
Thanks in advance
Best Regards,
Arunas
Hy, Srini,
Thanks for your response.
There is a simple example, which describes the main principle of my solution:
Characteristic DIVISION
A
B
(filled with master data)
Characteristic LEVEL
1
2
(filled with master data)
Characteristic NAME
Ben
John
(filled with master data)
char. LEVEL, NAME are attributes for char. DIVISION
DIVISION with master data:
Division Level Name
A 1 Ben
B 2 Jhon
Planning Layout:
In header section is char. DIVISION (variable)
When I select DIVISION with value A, in layout values for attributes should be displayed automaticaly:
DIVISION = A
NAME
LEVEL
(Lead column)
(Data column)
Ben
1
I find solution to do it with Characteristic Rels, but i can't insert char. LEVEL into Data Column, it can be just
in Lead Column.
I don't know how to do it.
Could you suggest something?
Best Regards,
Arunas
Similar Messages
-
How to add a new data element for existing table filed(Primary key field)
Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
RaviHi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob -
I want to add image in column is it possible then how to add image in data base what data type we need to give we required any casting please show me one example
jitendraHi again,
Several points that can help more:
1. If you are working with Dot.Net, then I highly recommend read the first link that you got! This is nice and simple coding. Another option is this link which is even better in my opinion:
http://www.dotnetgallery.com/kb/resource21-How-to-store-and-retrieve-images-from-SQL-server-database-using-aspnet.aspx
2. As i mention above both link use the column's type image. There are several other option of working with Files. In most of my applications architecture I find that it is better to use a column which let us use any type of file and not an image column.
In choosing the right column's type for your needs basically your fist question should be if if you want to store your data inside relational database environment or outside relational environment. It is a good idea to look for blogs on this issue. Next
if you chose to store your data inside then you need to chose the right column type according to your server version. I highly recommend to look for blogs on the differences between those column's types: IMAGE,
Check those links:
To BLOB or Not To BLOB: Large Object Storage in a Database or a Filesystem
http://research.microsoft.com/apps/pubs/default.aspx?id=64525
FILESTREAM feature of SQL Server 2008
http://msdn.microsoft.com/library/hh461480
FileTables feature of SQL Server 2012
http://technet.microsoft.com/en-us/library/ff929144.aspx
Compare Options for Storing Blobs (SQL Server)
http://technet.microsoft.com/en-us/library/hh403405.aspx
Binary Large Object (Blob) Data (SQL Server)
http://technet.microsoft.com/en-us/library/bb895234.aspx
Managing BLOBs using SQL Server FileStream via EF and WCF streaming
* Very nice tutorial!
http://petermeinl.wordpress.com/2012/02/20/managing-blobs-using-sql-server-filestream-via-ef-and-wcf-streaming/
[Personal Site] [Blog] [Facebook] -
How to add attributes in Cost Objects via Data Bridge?
Hi everyone,
I need your help. I want to know if is possible to add attributes via Data Bridge in Cost Objects tables like the country or address of a customer?
Thanks for all.
Sincerely,
Pedro SousaHi,
Jef is right you need to use the different values in the "Attribute Flag" field for creating attribute hierarchy using data bridge.
For attribute Hierarchy you need to use option 12 & 15 depending on your requirement.
12 - Attribute Assignment - Used for assigning attribute to a member of the main hierarchy
15 - Attribute Hierarchy only - used for creating hierarchy within attribute hierarchy.
As mentioned by Jef for details you can refer the Data bridge user guide section 4.3.
Regards,
Niraj -
How to aggregate a column based date column (for weekly single row)?
How to aggregate a column based date column (for weekly single row)?
Hi,
Consider the below statement for daily bases which is ok
SELECT ID, DATE, SUM(AMOUNT) FROM TABLE_NAME GROUP BY ID, DATE ORDER BY ID, DATE
The same like the above statement, I want output on weekly, fortnightly, and monthly bases, How to do this? Need your help... -
RE: how to add attributes in graphical modulator in segment builder .
Hi Gurus,
can you please help me how to add attributes in graphical modulator in segment builder in sap CRM 7.0 WEB-UI.
thanks and regards
satyanarayana
Edited by: koradasatya on Oct 27, 2011 8:14 PMHi Gurus,
thanks for your reply my requirement from client is given below if you could answer this it will be a great help for me.
WKSC needs to be able to make selections (in segment builder) with the possibilities to use stored data on organizations. The information we are missing in Segment builder (SB) (and Account search for industrycode) are Industrycode (we want to see values not codes) and responsible salesrep (values not codes).
These variables together with regions and other marketing attributes is crucial for us. Without it we cannot use the functionality built.
We also need it so that we can extract smaller parts of our customers and prospects and update them with information from the thirdparty or adding new persons to them.
Everyone using the SB should be able to use the fields for selections. i.e. Marketers, marketing managers and power users.
Example
We would like to make selections that could look like this.
Region: A and B
Organization in Industrycode C
Sales rep: D, E, and F
Turnover: above 50000
CP on selected orgs
CP has title G or H
CP has Email not blank
thanks and regards
satya -
How to add an extra dynamic columns in workflow inbox?
Hi Every Expert,
Transaction SWL1 only provides Six columns as dynamic columns for workflow inbox. But we need to use 7 to 8 dynamic columns. How to add these two extra columns into workflow inbox?
Thanks,
ShirleyThank you very much for all you responses.
Due to SAP only provides 6 columns, I can't add anohter extra dynamic column. I may consider to change task to show the contents in preview pane.
Thanks again to everyone.
Shirley, -
How to add entry to MEMSD_DEP (Packagesize for T51) second ;-)
Hi,
ok I posted the thread "How to add entry to MEMSD_DEP (Packagesize for T51)?" before and now I have created the view and I am able to add entries to the table....
BUT:
If I try to add the entry like they are described in the help.sap.com - search for "T51 MEMSD_DEP" - I get the following error:
"Entry T51SYNCBOCONFIG does not exsist in MEMSD - check your entry."
And it is right in the MEMSD there are all my applications and patches I have uploaded in the webconsole, but no T51SYNCBOCONFIG....
Can you help me out?
Greetings,
KaiHi Kai Meyer-Spradow,
<<<<
one main thing ..
<b>In that documentation , they have specified that there is one MCD named T51SYNCBOCONFIG .. I think in that sense ,
it written there as ,,</b>
1. Start the transaction mi_mcd.
2. Enter the application name and choose Display MCD.
3. Choose Display <-> Change.
4. Choose the SyncBO tab page.
5. Enter the following settings for each SyncBO of type Back-End-Driven:
The object ID in the SyncBO-ObjectID column.
The delay with which the job is to be scheduled in the Interval column.
6. Choose Save.
just look at that ...
>>>>>>>
just do one think ..
If that T51SYNCBOCONFIG is not there in ur MI server , create a new MCD with this name and include ur Back - end driven syncBo to this MCD. then proceed.
These are the primary keys of the table MEMSD_DEP.
Fields Check Table
NAMESPACE TRNSPACET
NAME MEMSD
VERSION MEMSD
TYPE MEMSD_DEPTYPE
TYPE_INDEX
DEPENDENCY_NAME
MEMSD
This table is the Mobile Component Descriptor master table.
This will contain the details of the created MCDs.
Inorder to insert values in the fields on which we have assigned the check table,
values must be present in this check table.
That means , to insert a new value in the NAME field of the MEMSD_DEP table , that entered value must be present in the MEMSD table .
If T51SYNCBOCONFIG is not in the MEMSD tabel , u cannot insert this value in the table MEMSD_DEP.
Regards
Kishor Gopinathan -
How to add description of a column of a table in SQL Azure
Hi
I have some tables in my application database where there are descriptions added against certain columns. Needless to say they were done by using sp_addextendedproperty.
Now I am trying to migrate the Database to SQL Azure. SQL Azure does not support sp_addextendedproperty.
Hence I am not able to figure out how to add descriptions to those columns.
Any help would be much appreciated.
Thanks
SoumyadebHello,
Just as Latheesh post above, Windows Azure SQL database are not support extended stored procedures. That’s one of the limitations on SQL database, and I don’t know there is another way to achieve the same on Azure.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
How to fetch year till date value for earning for current ,last and year
hi,
how to fetch year till date value for earning for current ,last and year before that from payroll result
plz reply soon,
pratyushDear Pratyush,
Pick this from CRT.
Use LDB PNPCE & Fire event GET PAYROLL &
then you can pick from CRT.
Hope this helps.
Kindly reward in case useful.
Regards & Thanks,
Darshan Mulmule -
How do I get a data plan for iPad
How do I get a data plan for my ipad
Check with your wireless carrier to see if they offer a MiFi device.
http://en.wikipedia.org/wiki/MiFi -
How to add silver front panel theme for labview 2010
how to add silver front panel theme for labview 2010
Mahisnair wrote:
yes i had tried this way but the vi built with silver theme doesnt look good in 2010 :-(
wish if there was a way to include silver theme in 2010
The only way I see to make it like that would be to recreate the theme in LabVIEW 2010 with external bitmap objects. Unfortunately it won't be as functional as the silver controls in various terms such scaling (bitmaps scale very badly) or transparency and click through functionality (a bitmap assigned to a control part will always catch all clicks and never allow a click to pass through anywhere to a lower layered part).
The silver controls are using special internal graphic objects that were added in LabVIEW 2011, so recreating silver controls with the same functionality in earlier LabVIEW versions is impossible.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
How to add new tab after reason for rejection tab using tcode va01
Hello,
how to add new tab after reason for rejection tab using tcode va01.Hi,
You can check this link...
Hope it will be helpful to you.
[https://forums.sdn.sap.com/click.jspa?searchID=23016273&messageID=6825861]
[http://www.sapdevelopment.co.uk/enhance/fexits.htm]
-Maharshi
Edited by: Maharshi Vyas on Mar 3, 2009 12:45 PM -
when i hooked up my ipod to my computer and opened itunes it wouldnt connect to it. therefore i cant add music. why wont it show up, or sync? i just got the itunes update also so i dont know how to add music to my ipod if it changed.
Hello AnthonyHamilton,
The following article can help get iTunes to recognize your iPhone again.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen -
My calendar date is not automatically changing, what's the proper setting?
My calendar date is not automatically changing, what's the proper setting?
If the population of the ObservableList (independent of any UI considerations takes a long time, then you probably want to do the populations off the JavaFX application thread (e.g. via a javafx.concurrent.Task)).
If you do populate the list in a Task, standard threading cautions apply in terms of not updating items in the scene graph off the JavaFX application thread and ensuring that the system is absent of race conditions, etc.
Look over the documentation of http://docs.oracle.com/javafx/2.0/api/javafx/scene/control/Cell.html and that may help you.
The JavaFX controls such as ListView have been carefully designed to exhibit high performance even when backed by extremely large lists (through the concept of virtualization explained in the Cell documentation). For example, if the backing list is updated but the portion of the list being updated is not within the currently displayed list contents, (I would hope) the update would be very efficient.
Maybe you are looking for
-
I have Lion on an external hard-drive and I want to install it on the internal disk
I have Lion on an external hard-drive and I want to install it on the internal disk. How can I proceed?
-
Colors in PDF documents are wrong Please!!! Help!
When i open a PDF color document with Adobe, the colors are all wrong. It doesn't matter if i open the PDF document in IE browser or Adobe alone on desktop. All the PDF documents have the wrong color being displayed. Downloaded latest driver for moni
-
Issue converting the following query to text.
Hello guys, I'm trying to convert the following query to text and to use PRINT so that it returns theresult in the picture as output, help would be appreciated, thanks :)SELECT EventName, EventDate FROM EventTable ORDER BY EventDate DESC;
-
Attachments Table (AkAttachUploadPageCO.class)
We have used the Oracle provided Attachment facility to customise the page MAAnswerQuestPG, where we have created an attachment table using personalisations. You get to this page using ManagerSelf-Service-> Appraisals-> when you try and update an app
-
Firefox won't give me new tabs. How can I fix this?
When I try to add a new tab, Firefox won't open a new tab. I have to select a new window. When I click on a link, it won't take me to Firefox. I have to open it.