How to add check box in SAP B1 grid controls..

hi all,
Anyone know how to add check box in SAP grid control?
It will be great if you could show me some sample code.
thanks.
regards,
sohch

Hi Sohch,
1. First of all you should define the Column in a matrix as it_CHECK_BOX. Like
        oColumns = oMatrix.Columns
        oColumn = oColumns.Add("chk_YesNo", SAPbouiCOM.BoFormItemTypes.it_CHECK_BOX)
        oColumn.TitleObject.Caption = "YesNo"
        oColumn.Width = 60
        oColumn.Editable = True
2. Bind it with a DBDataSource as defined
        oColumn = oColumns.Item("chk_YesNo")
        oColumn.DataBind.Bind("UDTable", "U_YesNo")
3. Make Sure that the value that is being put into the Database is either 'Y' or 'N'.
Hope this Helps
Rizwan Hafeez
Team Lead
SAP Addon Development Section
Abacus Consulting - Pakistan

Similar Messages

  • How to add check boxes on plant data /storage tab of MM01/02/03 transaction

    Hello experts,
    I want to add check boxes on plant data /storage tab of MM01/02/03 transaction.
    How can we achieve this?
    Thanks for your help in advance!

    Hi Shriram Nimbolkar ,
    Go to tranx code : MM01 /MM02 / MM03
    1 ) System-->Status , here copy the program
    2) Go to abap editor ,specify the program name and copy the package
    3) Go to CMOD or SMOD
          CMOD>Utilites-> SAP Enanchements, Here specify the package and execute it..
      4) Displays multiple exists,
          check the suitable exists and insert the code in particular screen...
    Reg
    Siva Prasad

  • How to add check box in table control?

    Dear frnds,
    In our requirement i am used tablec ontrol for dialog programming, but i am confused about addition of check box as fields in table control.
    Any help are welcome from your side.

    Hi,
    Chk this demo program: DEMO_DYNPRO_TABCONT_LOOP_AT
    & RSDEMO02.
    Another way:
    Go to the edit mode of the screen select the table control column you want to make it as check box and follow the menu EDIT->CONVERT->check box.
    (make sure that column definition in itab/ddtab is of size 1 char)
    Also chek out this link:
    Add Check box in Table control
    Hope these help you.
    Regards,
    Anjali

  • How to add check box to the forms in scripts

    Hello experts,
             i got one requirement. to add a check box to the form. how can we add a check box in form. is it possible to adda check box in scripts?
    thanks in advance.

    Hi Pammi,
    In a window go for text elements & then go for change editor & use the following:
    Insert->Characters->SAP symbols->SYM_CHECKBOX
    It will not show checkbox in print preview. Take a printout.
    Ashven

  • How to add check box to list screen in SYCLO Agentry?

    Hi,
    How can I add a check box to the list screen. I want to add a new column which allows the user to select the check box.
    I have tried with "Allow Multi-Row Select" option. When I selected this option I am getting an error
    "The For Object defined for the "Transmit" action is invalid. 'None' is not a valid choice since the Multi-Row Selection option for the list screen is enabled."
    -Shyam

    Is the list screen in transaction screenset or Object?
    You can't use the field type button in a list screen.  But what you can do is take a 16 x 16 image, with a checked box not checked.
    Users will not be able just to check the box to enable it or not.  You need to have an action linked to a button to the selected row, or you can have an action fire if the user double checks the row.
    Stephen

  • How to add check box in the ALV list

    dear Experts,
                 i have a requirement.
    i want show the check boxes in my ALV list.
    can u please give the solution.
    thanks

    TYPE-POOLS: slis.
    *---internal tables
    DATA: BEGIN OF it_flight OCCURS 0,
    SEL, " add a single character field in the final output table
    carrid LIKE sflight-carrid,
    connid LIKE sflight-connid,
    fldate LIKE sflight-fldate,
    seatsmax LIKE sflight-seatsmax,
    seatsocc LIKE sflight-seatsocc,
    END OF it_flight,
    *--internal tables for alv
    it_fieldcat TYPE slis_t_fieldcat_alv,
    wa_fcat LIKE LINE OF it_fieldcat,
    layout TYPE slis_layout_alv,
    it_sort type slis_t_sortinfo_alv,
    wa_sort like line of it_sort.
    DATA: BEGIN OF it_flight_sel OCCURS 0,
    SEL,
    carrid LIKE sflight-carrid,
    connid LIKE sflight-connid,
    fldate LIKE sflight-fldate,
    seatsmax LIKE sflight-seatsmax,
    seatsocc LIKE sflight-seatsocc,
    END OF it_flight_sel.
    data: wa_flight like it_flight.
    In the layout set give the name of the field
    whose checkbox will be created ( SEL as it has 1 char only )
    layout-box_fieldname = 'SEL'.
    *---start-of-selection .
    START-OF-SELECTION.
    CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
    i_program_name = sy-repid
    i_internal_tabname = 'IT_FLIGHT'
    i_inclname = sy-repid
    CHANGING
    ct_fieldcat = it_fieldcat
    EXCEPTIONS
    inconsistent_interface = 1
    program_error = 2.
    *----get data
    SELECT carrid
    connid
    fldate
    seatsmax
    seatsocc
    FROM sflight
    INTO CORRESPONDING FIELDS OF TABLE it_flight
    UP TO 20 ROWS.
    wa_fcat-do_sum = 'X'.
    MODIFY it_fieldcat FROM wa_fcat TRANSPORTING do_sum
    WHERE fieldname = 'SEATSOCC' .
    wa_sort-fieldname = 'CARRID'.
    wa_sort-group = 'UL'.
    wa_sort-up = 'X'.
    APPEND wa_sort TO it_sort.
    clear wa_sort.
    wa_sort-fieldname = 'CONNID'.
    wa_sort-subtot = 'X'.
    wa_sort-up = 'X'.
    APPEND wa_sort TO it_sort.
    clear wa_sort.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    i_callback_program = sy-repid
    I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
    is_layout = layout
    it_fieldcat = it_fieldcat
    it_sort = it_sort
    TABLES
    t_outtab = it_flight
    EXCEPTIONS
    program_error = 1.
    FORM user_command USING r_ucomm LIKE sy-ucomm
    rs_selfield TYPE slis_selfield.
    Check function code
    CASE r_ucomm.
    WHEN '&IC1'.
    Check field clicked on within ALVgrid report
    IF rs_selfield-fieldname = 'EBELN'.
    Read data table, using index of row user clicked on
    READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
    Set parameter ID for transaction screen field
    SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
    Sxecute transaction ME23N, and skip initial data entry screen
    CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
    ENDIF.
    WHEN '&IC1'. "'&DATA_SAVE'. "user presses SAVE
    loop at it_flight into wa_flight.
    if wa_flight-Sel EQ 'X'.
    collecting records in table it_flight_sel to process further
    append wa_flight to it_flight_sel.
    clear wa_flight.
    TYPE-POOLS: slis.
    *---internal tables
    DATA: BEGIN OF it_flight OCCURS 0,
    SEL, " add a single character field in the final output table
    carrid LIKE sflight-carrid,
    connid LIKE sflight-connid,
    fldate LIKE sflight-fldate,
    seatsmax LIKE sflight-seatsmax,
    seatsocc LIKE sflight-seatsocc,
    END OF it_flight,
    *--internal tables for alv
    it_fieldcat TYPE slis_t_fieldcat_alv,
    wa_fcat LIKE LINE OF it_fieldcat,
    layout TYPE slis_layout_alv,
    it_sort type slis_t_sortinfo_alv,
    wa_sort like line of it_sort.
    DATA: BEGIN OF it_flight_sel OCCURS 0,
    SEL,
    carrid LIKE sflight-carrid,
    connid LIKE sflight-connid,
    fldate LIKE sflight-fldate,
    seatsmax LIKE sflight-seatsmax,
    seatsocc LIKE sflight-seatsocc,
    END OF it_flight_sel.
    data: wa_flight like it_flight.
    In the layout set give the name of the field
    whose checkbox will be created ( SEL as it has 1 char only )
    layout-box_fieldname = 'SEL'.
    *---start-of-selection .
    START-OF-SELECTION.
    CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
    i_program_name = sy-repid
    i_internal_tabname = 'IT_FLIGHT'
    i_inclname = sy-repid
    CHANGING
    ct_fieldcat = it_fieldcat
    EXCEPTIONS
    inconsistent_interface = 1
    program_error = 2.
    *----get data
    SELECT carrid
    connid
    fldate
    seatsmax
    seatsocc
    FROM sflight
    INTO CORRESPONDING FIELDS OF TABLE it_flight
    UP TO 20 ROWS.
    wa_fcat-do_sum = 'X'.
    MODIFY it_fieldcat FROM wa_fcat TRANSPORTING do_sum
    WHERE fieldname = 'SEATSOCC' .
    wa_sort-fieldname = 'CARRID'.
    wa_sort-group = 'UL'.
    wa_sort-up = 'X'.
    APPEND wa_sort TO it_sort.
    clear wa_sort.
    wa_sort-fieldname = 'CONNID'.
    wa_sort-subtot = 'X'.
    wa_sort-up = 'X'.
    APPEND wa_sort TO it_sort.
    clear wa_sort.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    i_callback_program = sy-repid
    I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
    is_layout = layout
    it_fieldcat = it_fieldcat
    it_sort = it_sort
    TABLES
    t_outtab = it_flight
    EXCEPTIONS
    program_error = 1.
    FORM user_command USING r_ucomm LIKE sy-ucomm
    rs_selfield TYPE slis_selfield.
    Check function code
    CASE r_ucomm.
    WHEN '&IC1'.
    Check field clicked on within ALVgrid report
    IF rs_selfield-fieldname = 'EBELN'.
    Read data table, using index of row user clicked on
    READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
    Set parameter ID for transaction screen field
    SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
    Sxecute transaction ME23N, and skip initial data entry screen
    CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
    ENDIF.
    WHEN '&IC1'. "'&DATA_SAVE'. "user presses SAVE
    loop at it_flight into wa_flight.
    if wa_flight-Sel EQ 'X'.
    collecting records in table it_flight_sel to process further
    append wa_flight to it_flight_sel.
    clear wa_flight.
    Please follow the code.

  • How to add Check box to a static Drop down list (bases on a selection list) and allow mulity select in it?

    Dear All,
    I created a text field in my project (Light switch 201, C#), this text field has a static list which I filled manually. when I click in this text box I get a dropp down list which allow me to chose only one value from it.
    Now what I want to do is to add a check box in this drop down list and allow mulity selection from this list. My list looks as follow:
    Can anyone help me :) ? 
    Thanks all,
    Zayed

    Something like this:
    http://www.codeproject.com/Tips/452756/Add-checkbox-inside-combobox-in-Silverlight

  • I am new to using flash and need to know how to add check boxes and forms

    I have been going mad trying to figure this out as well as searching until exhaustion.
    So I am hoping someone can point me in the right direction.
    Okay here is what I am trying to accomplish.
    I have laid out my design as a psd and brought it into adobe flash pro cs5.
    I have menu items such as toppings that I want to put check boxes next to each and then once someone goes thru the page and places their choices,I want to be either be emailed what they have chosen from the form... This seems like it might be the easier of the ways to capture data, Or if there is a better way in flash to capture this data, I would take that as well.
    SO here is as far as I can get.
    Imported the psd and added one checkbox in front of the first item and labeled it strawberries. Now I really don't want the word strawberries to show up at all on the page,just the checkbox. But I am not sure if the label for the checkbox actually passes on the value of the checkbox.
    I admit I am lost.
    I did also slice and export this same image into dreamweaver and then I made a separate apDiv for each checkbox, and added into a form. It emails the results,but it is not outputting it in a very readable way.
    Oh I also brought this int Flash Catalyst and added the checkboxes, but I don't know where to go from there.
    So if anyone can let me know the proper way to do this or point me to some videos or tutorials or even a sample file that I can alter....
    I would really appreciate it.
    Thanks

    http://www.flashloaded.com/userguides/ezform/formelements.html

  • How to handle check box click in ALV grid

    Hi Experts,
    I use ALV grid using FM.
    I have list of delivery note items with one custom field as check-box. When I check the checkbox, all other lines related to the same delivery note should be automaticaly checked.
    Is there any event or function code, where I can handle single click to checkbox?
    Thanks&regards, 
    Jirka

    HI
    you can use following code in user command function .
    DATA :BEGIN OF IT_MAINDATA OCCURS 0,
          MAINDATA(1),
          IT_RD1(1),
    END OF IT_MAINDATA.
    data: V_INDEX TYPE I.
    DESCRIBE TABLE itab LINES LINE.
      DO. " line times.
        READ LINE SY-INDEX FIELD VALUE Iitab-RD1.
        IF SY-SUBRC NE 0. EXIT. ENDIF.
        CHECK V_INDEX > 0.
        CHECK itab-RD1 = 'X'.
        MODIFY itab INDEX V_INDEX.
        IT_MAINDATA-IT_RD1 = Iitab-RD1.
      ENDDO.
    i think is work.
    regards,
    Abhi

  • How to add a new server to the grid control

    Hi ,
    OEM 10g grid control has already bee installed n our site . But I don't know how a add /configure a new sever / database into that . Do I need to install the agent software on the destination machine OR is there any way to add the new sever from the 10g grid control itself ... Please help me out . You can also revert me back on my id [email protected]
    redgs
    RAHUL

    thnx for replying .
    Could you please tell me the patch number that I need to download for OEM grid control 10.2.0.3 . Actually I searched for lot of docs . But didn't found doc regarding installation of oem agent and agent PATCH number .
    So , Please revert back with necessary Patch number and all the steps that I need to be follow . Thanx in advance
    regds
    RAHUL

  • How to print check box in sap script

    I have a requirement in SAP Script to print a Check bok.
    I tried using SAP symbols in the script, but it does not print. It inserts <679> for checkbox &  <697> for marked checkbox. Any special command to be passed?
    Regards,
    Prabhu Rajesh.

    Hi,
    Are you sure your printer is capable of printing graphics ?
    Cheers
    Colin.

  • How to increase size of check box in sap script

    Hi All,
    I need to include check box in sap script. I included check box using insert>character->sap symbols. I cant able to view check box in print preview but i can able to get check box in print out.Size of check box printed in the paper is not having enough size. I need to increase size of the check box. Give me suggestion for increasing size of check box.
    Regards,
    Peranandam

    Chk the link.
    http://help.sap.com/saphelp_47x200/helpdata/en/d1/80318f454211d189710000e8322d00/frameset.htm

  • How to acheive check box in SCRIPTS

    Hi All,
    I am working on SCRIPTS, I want a check box with checked in the layout after execting. I am not changing any driver program
    How to acheive this.
    Thanks in advance

    Hi,
    You can achive check boxes in scripts using this below link
    http://abapeasy.blogspot.com/2008/03/3-easy-way-to-add-checkbox-in-your.html
    with out modifying the print program u can check the check box using the PERFORM ---ENDPERFORM CONTROL COMMAND
    see this link how to use preform contorl command in script
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/cb3d07455611d189710000e8322d00/frameset.htm
    Regards
    Jagadeesh

  • How to print Check Box in smartform

    HI,
      How to print check box in smartforms. I am using Include Sap Symbol but in the print it is coming as #. Do we need to do any setting like we do for barcode?
    Thanks
    Raghavendra

    hi,
    u can print a check box in different ways.. by inserting symbols and making window as check box..
    once go through the thread u will get to k now differnt ways
    putting checkboxes in smartform?
    Please Close this thread.. when u r problem is solved. Reward all Helpful answers
    Regards
    Naresh Reddy K

  • How to insert check box fields in a htmlb: tableview

    Hi,
    Can anybody tell me how to insert check box fields in a htmlb: tableview in a sequence of rows in a table view. How to generate the sequence no for the checkbox inorder to know the row that is checked.
    Thanks in advance,
    Aruna.

    Here is the code which has the custom "Checkbox" in the tableview & Triggers the event. <b>You can identify the checkbox based on cell ID (p_cell_id)</b> in the method "IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START" & Based on the event name + Cell ID. Look at the code & let me know if you any issue.
    <b>Layout:</b>
    <%@page language="abap" %>
    <%@extension name="htmlb" prefix="htmlb" %>
    <htmlb:content id               = "content"
                   design           = "design2002+design2003"
                   controlRendering = "SAP"
                   rtlAutoSwitch    = "true"
                   forceEncode      = "ENABLED" >
      <htmlb:page title="Test " >
        <htmlb:form>
          <%
      data TV_ITERATOR Type Ref To zcl_itr.
      data iterator type ref to IF_HTMLB_TABLEVIEW_ITERATOR.
      create object tv_iterator exporting appl_cons = application.
      iterator = tv_iterator.
          %>
          <htmlb:tableView id              = "fligts"
                           headerText      = "Flight"
                           width           = "100"
                           headerVisible   = "true"
                           design          = "alternating"
                           visibleRowCount = "10"
                           fillUpEmptyRows = "true"
                           showNoMatchText = "true"
                           filter          = "server"
                           sort            = "server"
                           onHeaderClick   = "MyEventHeaderClick"
                           table           = "<%= APPLICATION->itab %>"
                           iterator        = "<%= ITERATOR %>" />
        </htmlb:form>
      </htmlb:page>
    </htmlb:content>
    <b>Event Handling:</b>
    DATA: EVENT_ID1 TYPE REF TO IF_HTMLB_DATA.
    EVENT_ID1 = CL_HTMLB_MANAGER=>GET_EVENT_EX( REQUEST ).
    CASE EVENT_ID1->EVENT_SERVER_NAME.
    IF NOT event_id1 IS INITIAL.
       if event_id1->server_event+0(9) = 'chkevent'.
      SPLIT event_id1->server_event AT '-' INTO v_event v_dummy v_row v_col.
      endif.
    endif.
    method IF_HTMLB_TABLEVIEW_ITERATOR~GET_COLUMN_DEFINITIONS.
         CLEAR p_column_definitions.
        CLEAR p_overwrites.
        DATA: tv_column  TYPE TABLEVIEWCONTROL.
        tv_column-COLUMNNAME  = 'FLDATE'.
        tv_column-edit        = 'X'.
        tv_column-sort        = 'X'.
        tv_column-TITLE               = 'Flight Date'.
        tv_column-WIDTH  = '100'.
        APPEND tv_column TO p_column_definitions.
        CLEAR tv_column.
        tv_column-edit        = 'X'.
        tv_column-COLUMNNAME          = 'CONNID'.
        tv_column-TITLE               = 'Conn.ID'.
        tv_column-WIDTH  = '70'.
        tv_column-HORIZONTALALIGNMENT = 'center'.
        APPEND tv_column TO p_column_definitions.
        CLEAR tv_column.
        tv_column-edit        = 'X'.
        tv_column-COLUMNNAME          = 'CHECKBOX1'.
        tv_column-TITLE               = 'Check Box'.
        tv_column-WIDTH  = '30'.
        tv_column-HORIZONTALALIGNMENT = 'center'.
        APPEND tv_column TO p_column_definitions.
    endmethod.
    METHOD IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START.
           DATA: L_EVENT TYPE STRING.
      CASE P_TABLEVIEW_ID.
        WHEN 'fligts'.
          CASE P_COLUMN_KEY.
            WHEN 'CHECKBOX1'.
    *          CONCATENATE 'chk_event' '123' '2323' INTO L_EVENT SEPARATED BY '-' .
    CONCATENATE 'chkevent' p_cell_id INTO l_event SEPARATED BY '-'.
              P_REPLACEMENT_BEE = CL_HTMLB_CHECKBOX=>FACTORY( ID = P_CELL_ID
            ONCLICK = L_EVENT CHECKED = 'false' ).
          ENDCASE.
      ENDCASE.
    ENDMETHOD.
    Hope this will solve your problem.
    <b><i>* Reward each helpful answer.</i></b>
    Raja T
    Message was edited by:
            Raja T

Maybe you are looking for


HashFlare