How to add check box in table control?
Dear frnds,
In our requirement i am used tablec ontrol for dialog programming, but i am confused about addition of check box as fields in table control.
Any help are welcome from your side.
Hi,
Chk this demo program: DEMO_DYNPRO_TABCONT_LOOP_AT
& RSDEMO02.
Another way:
Go to the edit mode of the screen select the table control column you want to make it as check box and follow the menu EDIT->CONVERT->check box.
(make sure that column definition in itab/ddtab is of size 1 char)
Also chek out this link:
Add Check box in Table control
Hope these help you.
Regards,
Anjali
Similar Messages
-
How to add check box in SAP B1 grid controls..
hi all,
Anyone know how to add check box in SAP grid control?
It will be great if you could show me some sample code.
thanks.
regards,
sohchHi Sohch,
1. First of all you should define the Column in a matrix as it_CHECK_BOX. Like
oColumns = oMatrix.Columns
oColumn = oColumns.Add("chk_YesNo", SAPbouiCOM.BoFormItemTypes.it_CHECK_BOX)
oColumn.TitleObject.Caption = "YesNo"
oColumn.Width = 60
oColumn.Editable = True
2. Bind it with a DBDataSource as defined
oColumn = oColumns.Item("chk_YesNo")
oColumn.DataBind.Bind("UDTable", "U_YesNo")
3. Make Sure that the value that is being put into the Database is either 'Y' or 'N'.
Hope this Helps
Rizwan Hafeez
Team Lead
SAP Addon Development Section
Abacus Consulting - Pakistan -
How to display check box in atable control
hi
here is my requirement
how can i display check box in table control and also when i check that check box it has to dispaly one pop up screen with the records of table control row
points will be rewarded
Thanks&Regards
Nagesh.ParuchuriHi,
See this code for how to display check box in atable control
*---- Table declaration.
TABLES: KNA1.
CONTROLS TC1 TYPE TABLEVIEW USING SCREEN 200.
CONTROLS TC2 TYPE TABLEVIEW USING SCREEN 300.
*---- Data declaration.
DATA:OKCODE LIKE SY-UCOMM.
DATA:V_KNA1 LIKE KNA1.
*DATA:ERROR TYPE C.
*---- Internal Table declaration.
DATA:BEGIN OF IT_TAB OCCURS 0,
CHK,
VBELN TYPE VBELN_VA,
KUNNR TYPE KUNAG,
ERDAT TYPE ERDAT,
AUDAT TYPE AUDAT,
VBTYP TYPE VBTYP,
END OF IT_TAB.
DATA:BEGIN OF IT_TAB1 OCCURS 0,
VBELN TYPE VBELN_VA,
POSNR TYPE POSNR_VA,
MATNR TYPE MATNR,
MATWA TYPE MATWA,
PMATN TYPE PMATN,
END OF IT_TAB1.
*& Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
OKCODE = SY-UCOMM.
CASE OKCODE.
WHEN 'DISP' OR SPACE.
SELECT *
FROM VBAK
INTO CORRESPONDING FIELDS OF TABLE IT_TAB
WHERE KUNNR = KNA1-KUNNR.
IF SY-SUBRC <> 0.
MESSAGE 'No sales document exists'(001) TYPE 'I'.
ENDIF.
LEAVE TO SCREEN 200.
CLEAR OKCODE.
*--- To leave Transaction
WHEN 'BACK' .
LEAVE PROGRAM.
CLEAR OKCODE.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module validate_kunnr INPUT
MODULE VALIDATE_KUNNR INPUT.
V_KNA1 = KNA1.
SELECT SINGLE *
FROM KNA1
WHERE KUNNR = KNA1-KUNNR.
*-----Process error condition
IF SY-SUBRC <> 0.
CLEAR KNA1.
KNA1-KUNNR = V_KNA1-KUNNR.
CASE OKCODE..
WHEN 'BACK' OR 'EXIT' .
LEAVE PROGRAM.
ENDCASE.
MESSAGE 'Customer Does Not Exist'(002) TYPE 'I'.
LEAVE TO SCREEN 100.
ENDIF.
ENDMODULE. " validate_kunnr INPUT
*& Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'PF'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0200 INPUT
MODULE USER_COMMAND_0200 INPUT.
CASE OKCODE.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
LEAVE TO SCREEN 100.
CLEAR OKCODE.
CLEAR IT_TAB1.
WHEN 'DISP' .
CLEAR OKCODE.
READ TABLE IT_TAB WITH KEY CHK = 'X'.
IF SY-SUBRC = 0.
SELECT VBELN POSNR MATNR MATWA PMATN
FROM VBAP
INTO TABLE IT_TAB1
WHERE VBELN = IT_TAB-VBELN.
IF SY-SUBRC = 0.
SORT IT_TAB.
DESCRIBE TABLE IT_TAB LINES TC1-LINES.
LEAVE TO SCREEN 300.
ELSE.
MESSAGE E016(YBHV).
ENDIF.
ELSE.
MESSAGE 'Please select one record' TYPE 'I'.
ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Module STATUS_0200 OUTPUT
MODULE STATUS_0200 OUTPUT.
SET PF-STATUS 'PF3'.
ENDMODULE. " STATUS_0200 OUTPUT
*& Module USER_C.OMMAND_0300 INPUT
text
MODULE USER_COMMAND_0300 INPUT.
SET PF-STATUS 'PF3'.
CASE OKCODE.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
CLEAR OKCODE.
LEAVE TO SCREEN 200.
ENDCASE.
ENDMODULE. " USER_COMMAND_0300 INPUT
*& Module modify INPUT
MODULE MODIFY INPUT.
MODIFY IT_TAB INDEX TC1-CURRENT_LINE.
ENDMODULE. " modify INPUT
*& Module okcode OUTPUT
text
MODULE OKCODE OUTPUT.
CLEAR OKCODE.
ENDMODULE. " okcode OUTPUT
Reward Pointsa If usefull
Regards
Fareedas -
How to add a column in table control
Hi ,
Can any one tell me how to add a column in table control? My requirement is to add two columns ( custom fields ) into table control ( It is a standard program). I have added the column in the table and also in the table control. But when I am running the standard program, The newly added column is not there. But I have added in the perticular screen. Change is not reflected.
Can anyone help me on this please.
Thanks in advance.
Regards,
Lakshmi.Hi,
Ensure the following :
1. After adjusting the database, you`ll have to use the database utility and activate the table.
2. If you have changed the standard screen, in tcode se80 -- right click on the program and click activate all. This activates all objects related to that program.
Now execute the program.
Reward if helpful.
Regards -
How to add check boxes on plant data /storage tab of MM01/02/03 transaction
Hello experts,
I want to add check boxes on plant data /storage tab of MM01/02/03 transaction.
How can we achieve this?
Thanks for your help in advance!Hi Shriram Nimbolkar ,
Go to tranx code : MM01 /MM02 / MM03
1 ) System-->Status , here copy the program
2) Go to abap editor ,specify the program name and copy the package
3) Go to CMOD or SMOD
CMOD>Utilites-> SAP Enanchements, Here specify the package and execute it..
4) Displays multiple exists,
check the suitable exists and insert the code in particular screen...
Reg
Siva Prasad -
How to add new field to table control data not displayed
hi
I have added some nwe fields to already existing table control added three new fields...
though the recoreds are inserted in teh table properly with the three new fields user id data and time fields
but on display only the data is not shown in these three columns though the data is coming in internal table...but not to the screen output
pls suggest where the problme may be
nishantFirst try the small button Configuration on top right of the table control, as displayed when you run the program. Hit 'Administrator' and see if the fields are checked as invisible. Uncheck them, activate and save.
If the fields are not in that list at all, then check if the table control is initialized for the screen you use. For example
CONTROLS: tc_ent_lines TYPE TABLEVIEW USING SCREEN '0100'.
but you copied your screen and use the same table control in the new screen 0200. Then all you have to do is
REFRESH CONTROL 'TC_ENT_LINES' FROM SCREEN '0200'.
before you show the screen. -
How to add a field and table control to BP transaction.
Hi,
I have a requirement to add a field and table control to the 'Control data' tab of the Transaction BP.
Can some on please help me if having a solution and with any relavant documents.
Thanks in advance.
Raj & Khader.Also explore with EEWB tcode.
Refer this threads
Re: EEWB
Created New fields in Business Activity with EEWB
Cheers
Manohar -
How to add check box in the ALV list
dear Experts,
i have a requirement.
i want show the check boxes in my ALV list.
can u please give the solution.
thanksTYPE-POOLS: slis.
*---internal tables
DATA: BEGIN OF it_flight OCCURS 0,
SEL, " add a single character field in the final output table
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
seatsmax LIKE sflight-seatsmax,
seatsocc LIKE sflight-seatsocc,
END OF it_flight,
*--internal tables for alv
it_fieldcat TYPE slis_t_fieldcat_alv,
wa_fcat LIKE LINE OF it_fieldcat,
layout TYPE slis_layout_alv,
it_sort type slis_t_sortinfo_alv,
wa_sort like line of it_sort.
DATA: BEGIN OF it_flight_sel OCCURS 0,
SEL,
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
seatsmax LIKE sflight-seatsmax,
seatsocc LIKE sflight-seatsocc,
END OF it_flight_sel.
data: wa_flight like it_flight.
In the layout set give the name of the field
whose checkbox will be created ( SEL as it has 1 char only )
layout-box_fieldname = 'SEL'.
*---start-of-selection .
START-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'IT_FLIGHT'
i_inclname = sy-repid
CHANGING
ct_fieldcat = it_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2.
*----get data
SELECT carrid
connid
fldate
seatsmax
seatsocc
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE it_flight
UP TO 20 ROWS.
wa_fcat-do_sum = 'X'.
MODIFY it_fieldcat FROM wa_fcat TRANSPORTING do_sum
WHERE fieldname = 'SEATSOCC' .
wa_sort-fieldname = 'CARRID'.
wa_sort-group = 'UL'.
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
clear wa_sort.
wa_sort-fieldname = 'CONNID'.
wa_sort-subtot = 'X'.
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
clear wa_sort.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
is_layout = layout
it_fieldcat = it_fieldcat
it_sort = it_sort
TABLES
t_outtab = it_flight
EXCEPTIONS
program_error = 1.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
WHEN '&IC1'. "'&DATA_SAVE'. "user presses SAVE
loop at it_flight into wa_flight.
if wa_flight-Sel EQ 'X'.
collecting records in table it_flight_sel to process further
append wa_flight to it_flight_sel.
clear wa_flight.
TYPE-POOLS: slis.
*---internal tables
DATA: BEGIN OF it_flight OCCURS 0,
SEL, " add a single character field in the final output table
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
seatsmax LIKE sflight-seatsmax,
seatsocc LIKE sflight-seatsocc,
END OF it_flight,
*--internal tables for alv
it_fieldcat TYPE slis_t_fieldcat_alv,
wa_fcat LIKE LINE OF it_fieldcat,
layout TYPE slis_layout_alv,
it_sort type slis_t_sortinfo_alv,
wa_sort like line of it_sort.
DATA: BEGIN OF it_flight_sel OCCURS 0,
SEL,
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
seatsmax LIKE sflight-seatsmax,
seatsocc LIKE sflight-seatsocc,
END OF it_flight_sel.
data: wa_flight like it_flight.
In the layout set give the name of the field
whose checkbox will be created ( SEL as it has 1 char only )
layout-box_fieldname = 'SEL'.
*---start-of-selection .
START-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'IT_FLIGHT'
i_inclname = sy-repid
CHANGING
ct_fieldcat = it_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2.
*----get data
SELECT carrid
connid
fldate
seatsmax
seatsocc
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE it_flight
UP TO 20 ROWS.
wa_fcat-do_sum = 'X'.
MODIFY it_fieldcat FROM wa_fcat TRANSPORTING do_sum
WHERE fieldname = 'SEATSOCC' .
wa_sort-fieldname = 'CARRID'.
wa_sort-group = 'UL'.
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
clear wa_sort.
wa_sort-fieldname = 'CONNID'.
wa_sort-subtot = 'X'.
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
clear wa_sort.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
is_layout = layout
it_fieldcat = it_fieldcat
it_sort = it_sort
TABLES
t_outtab = it_flight
EXCEPTIONS
program_error = 1.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
WHEN '&IC1'. "'&DATA_SAVE'. "user presses SAVE
loop at it_flight into wa_flight.
if wa_flight-Sel EQ 'X'.
collecting records in table it_flight_sel to process further
append wa_flight to it_flight_sel.
clear wa_flight.
Please follow the code. -
How to add check box to list screen in SYCLO Agentry?
Hi,
How can I add a check box to the list screen. I want to add a new column which allows the user to select the check box.
I have tried with "Allow Multi-Row Select" option. When I selected this option I am getting an error
"The For Object defined for the "Transmit" action is invalid. 'None' is not a valid choice since the Multi-Row Selection option for the list screen is enabled."
-ShyamIs the list screen in transaction screenset or Object?
You can't use the field type button in a list screen. But what you can do is take a 16 x 16 image, with a checked box not checked.
Users will not be able just to check the box to enable it or not. You need to have an action linked to a button to the selected row, or you can have an action fire if the user double checks the row.
Stephen -
How to add check box to the forms in scripts
Hello experts,
i got one requirement. to add a check box to the form. how can we add a check box in form. is it possible to adda check box in scripts?
thanks in advance.Hi Pammi,
In a window go for text elements & then go for change editor & use the following:
Insert->Characters->SAP symbols->SYM_CHECKBOX
It will not show checkbox in print preview. Take a printout.
Ashven -
Hi,
Is it possible to trigger an event by checking the check box in a table control ,
so that i can use it to activate/ inactivate any field in the same table control ?
anoopwith check box alone you cannot trigger an event. You need to use a button also. All you can do is to trigger one event when the check box is checked and another event when the check box is not triggered.
regards,
srinivas
<b>*reward for useful answers*</b> -
Dear All,
I created a text field in my project (Light switch 201, C#), this text field has a static list which I filled manually. when I click in this text box I get a dropp down list which allow me to chose only one value from it.
Now what I want to do is to add a check box in this drop down list and allow mulity selection from this list. My list looks as follow:
Can anyone help me :) ?
Thanks all,
ZayedSomething like this:
http://www.codeproject.com/Tips/452756/Add-checkbox-inside-combobox-in-Silverlight -
Hi All How 2 add empty record to table control
Hi All,
If my table control has 10 records , and I want to add an empty record when i click a push button for that what is the procedure to do it. please send me the source code for that its Urgent.
Thanks&Regards.
Bharat Kumar .Hi..
In the PBO Module which is called before the LOOP on Table control .
Give the code like this..
DESCRIBE TABLE ITAB.
if OK_CODE = 'ADD'.
TABCON-LINES = SY-TFILL + 1.
ELSE.
TABCON-LINES = SY-TFILL .
ENDIF.
This will give the Additional line always when you click the ADD(some) button.
<b>Reward if Helpful</b> -
I am new to using flash and need to know how to add check boxes and forms
I have been going mad trying to figure this out as well as searching until exhaustion.
So I am hoping someone can point me in the right direction.
Okay here is what I am trying to accomplish.
I have laid out my design as a psd and brought it into adobe flash pro cs5.
I have menu items such as toppings that I want to put check boxes next to each and then once someone goes thru the page and places their choices,I want to be either be emailed what they have chosen from the form... This seems like it might be the easier of the ways to capture data, Or if there is a better way in flash to capture this data, I would take that as well.
SO here is as far as I can get.
Imported the psd and added one checkbox in front of the first item and labeled it strawberries. Now I really don't want the word strawberries to show up at all on the page,just the checkbox. But I am not sure if the label for the checkbox actually passes on the value of the checkbox.
I admit I am lost.
I did also slice and export this same image into dreamweaver and then I made a separate apDiv for each checkbox, and added into a form. It emails the results,but it is not outputting it in a very readable way.
Oh I also brought this int Flash Catalyst and added the checkboxes, but I don't know where to go from there.
So if anyone can let me know the proper way to do this or point me to some videos or tutorials or even a sample file that I can alter....
I would really appreciate it.
Thankshttp://www.flashloaded.com/userguides/ezform/formelements.html
-
In T-Code: MIRO ; how to add custom fields in Table Control
In MIRO
in PO Reference tabstip i want to add 2 custom fields ( say PO segment Invoice number and vechecle names i have to populate ).
How to do dis ,
any BADIs or any EXITS ????
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Ramesh.
Edited by: Alvaro Tejada Galindo on Dec 29, 2009 11:24 AMok
Maybe you are looking for
-
Hi Ernest, Chris, here from the iTunes Store. I see that you rented the movie "Captain America: The First Avenger" from the iTunes Store and it will not play properly. When it comes to your money, I can certainly appreciate how important it is to fee
-
Hi...i bought the new iphone 4 and would like to ask how can i transfer all my data from my old iphone to the new one? If I will do "synchronization" through itunes with the old phone and the plug in the new one will that be the case?
-
Viewing Sent mail has no content, attachments missing in Lion
Lion and Mail 5.0 . Some Windows computers are unable to view email body content. Also attachements don't appear eventhough they have uploaded and show the correct file size in the my sent mail folder. Sometimes an attachment shows up as a thumbnail
-
Is there a way to search e-mail in Time Machine? I use Mail and when I start TM to look the search bar in Mail becomes ghosted leaving me with the one solution: look through every folder in every back up manually. Anyone have a suggestion?
-
FLVplayback skin works in HTML locally, but not on a server.
I am developing a Flash based website that plays a video file using the FLVplayback component. Everything works fine locally, the paths are all relative and everything (index.html, the SWF with the FLVplayback and the skin SWF) is all in the same pla