How to add "Cost Plan Version" and "Planned Cost" into CNE5 report?

Hi,
I would like to display Cost Plan Version(VERSN) and Planned Cost in the CNE5 report.
How to retrieve Planned Cost that based on the Cost Plan Version ?
Appreciate helps. Thanks.
Regards,
See Mun

Plan versions:   A plan version is created in accounting and stores different cost plans for a project, such as an "optimistic" and a "pessimistic" plan.
Now coming to plan version 0 is verson where actaul cost is updated in your organisation.
Plan version 1 is used for the planning...
How to see the  same in CJE5 is suggested by Virendra..
However there is no filed name planned cost  in report but the name of the filed is Proj.cost sched.000
with which you can achieve your result.
path is run txn CJE5>give your Project no.> F8> in new screen> F5-->in new Window scroll down in the  right side for the Proj.cost sched.000 filed > with select take the same to left side>Enter--> values will displyed for this field in your report.
similarly you can use the other fields as well... take help of F4, to know the meaning of fileds.
Regards
Nitin
Edited by: Nitin  Patoliya on Jan 17, 2009 11:18 AM

Similar Messages

  • How to embed the Word Document and PDF file into Crystal report?

    How to embed the Word Document and PDF file into Crystal report?
    I have word doc which having 10 pages. I need to show all of the 10 pages at a time. I tried OLE object but problem is it shows only one page.
    Is there any solution to show word doc / PDF file in CR?

    Symptom :
    When embedding a pdf document into a Crystal Report, only the one page shows.
    Reproducing the Issue
    Environment:
    Crystal Reports OLE object
    Cause
    An OLE object only displays the first page.
    Resolution
    Embed multiple objects, one for each page
    Or
    Use a hyperlink to the object instead
    Hope this helps!
    Regards,
    Vinay

  • Transport of planning layouts and planning profiles (CO - Cost Center Acc.)

    Dear Experts,
    I am new to SAP CO and would like to transport new planning layouts and planning profiles. Therefore I clicked on transport and the following customizing task is added to my transport request:
    IMG Activity  Create Planning Layouts for Cost Element Planning
    -> ke34
    ->
    CEFORMC
    CEFORMF
    CEFORMS
    CEFORMT
    CEFORMV
    CEFORMW
    CEPRINT
    CESETS
    TKEBS 
    TKEP1 
    TKEP2 
    TKES1 
    TKES2 
    TKES4 
    TKES5 
    TKESK 
    The transport worked without error.
    Unfortunately none of the layouts arrives in test environment.
    Do you have any idea of what I could have forgotten?
    Thanks a lot!!
    Thomas

    After you have released the transport request, the objects of the request are available in the target system and the target clients. If you want to carry out a client copy within the same system, proceed as follows:
           1.      Log onto the system in the desired target client.
           2.      Start the client copy (Tools > Administration > Administration > Client Administration > Special Functions > Copy Transport Request; transaction SCC1) and enter the source client and the number of the transport request.
           3.      Then start importing the objects.

  • Difference between Planning Version and Simulation Version

    Hi friends,
    What is the difference between Planning Version and Simulation Version?
    Thanks,
    Debi

    Debi
    There are a lot of threads in this forum that give detailed info about version concept. Also you can refer to help.sap.
    Anyways , planning version is the version against which your live cache data is stored.  The data against this version is the one that the planners and buyers are going to refer to or use to make their planning and buying decisions. Data against the planning version is nothing but data relevant to the business .
    There may be instances where you would like to simulate some scenario. If you want to do trial and error analysis and at the same time if you do not want to impact the actual business data , then you create simulation versions and simulate your scenario.
    For example your actual sales orders received for the month of March may be 100 CS. This is the actual number that will be stored against your planning version. Lets say the demand planner wants to find out what will be the impact if there is a sudden bulk demand from a new customer for 500 CS - that is if he wants to do a what - if analysis then he can create a simulation version and try to check the impact .
    Thanks
    Aparna

  • Moving Planning areas and Planning books from SCM 4.0 to SCM 5.1

    Hello Experts,
    Can anyone have idea of how to transport planning areas and Planning book from SCM 4.0 to SCM 5.1.
    Do we need any prerequisite to Transport Planning area and Planning book from Lower version (SCM 4.0) to higher version SCM 5.1.
    Any suggestion could be very helpful for me.
    Thanks!
    Best Regards,

    I have never done this, but I suspect it might be tad easier to just recreate them in 5.1 There are scores of tables that Planning Book configuration lies in. I would not rely on a transport mechanism working across versions to migrate every bit of the configuration accurately.

  • Planning function and planning sequence of Design studio new features!!

    Hi Experts
    Recently I have updated my design studio to 1.3 and happy to see many new updates. Meanwhile i saw some new features add planning function and planning sequence.
    As per my understanding, Using this features we can enter data at run time. My query is here
    Is it like we are entering data at run time and see the changes in current data(chart series)
    Ex: Add discount for product 10% and relevant data(in chart) reduced to 10%
    or
    Is it like integrated planning? Once we enter data in run time and it saves in BW planning cube?
    I am totally confused with this feature.. Can any one help me to get clear understanding on this please !
    Regards,
    Mathivanan M

    Hi,
    maybe these two article can help you:
    #1 Planning in Design Studio 1.3
    #2 Planning in DS 1.3 - Using different script methods for planning
    As i unterstand, it's only possible to write back in BW.
    Best Regards 
    Sebastian

  • Plan version Current plan was set

    Hi Experts,
    I am working on the SAP HCM implementation in the Health Sector and this is the first time i am working in Health Sector Project, and one of the IS-Healthcare Consultant has raised the following issue saying it as HR, and i am unable to figure out if its my error or not,I checked all the settings from my end and everything seems to be fine from my end... Please Advise....
    In IS-H there is a t-code called NB20 to create an organization structure in IS-H , but when he is trying to execute the t code thru easy access, it is giving a message saying " PLAN VERSION CURRENT PLAN WAS SET" ...
    IMG - Personnel Management - Global Settings in Personnel Management - Plan Version Maintenance - Maintain Plan Versions/ Set Active Plan Version
    Please Advise...

    Dear bharadwaj kocherlakota:
       Please maintain parameter POP = 01 in SU3 for that guy from IS-H, exit/enter SAP again; that should stop the message
    Let us know if that work!
    Best regards,
    Federico.

  • How do I get my photos and music back into new version iTunes from my iPad?

    I have the new version of iTunes (11 0 2 26) for Windows which installed over my old copy. I see none of my music etc even after it claims to have synced and backed up. How do I get my photos and music back into iTunes from my iPad? It syncs OK with calendar and contacts from Outlook and I can force copying of apps and books but why does it not show music and photos in the iTunes library? help please.
    David

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    tt2

  • How to add a navigation Panel and Zoom Slider Bar using Java API

    Hello,
    I am using Mapviewer Java bean as I have to use Oracle Mapviewer in Java Stanalone application.Please can anyone tell me how to add a Navigation panel and Zoom Slider in Java API. I found the API s for same in Java Script but not in Java.Kindly help.
    I am using Oracle Mapviewer 11g.

    This is forum sponsored by Adobe make of Acrobat and Reader. Since Chrome and FireFox web browser have chosen to use their own viewer you might get more help in their forums or customer support.

  • How to add one date column and charecter column

    hi all,
    i have 3 column start_date(date),end_date( date),duration (varchar2)
    i am trying to add start_time and duration like this
    end_date := to_char(start_time) + duration;
    but its showing value_error
    how to add one date column and charecter column.
    Thanks

    you need something that does:
    end_date (DATE) := start_date (DATE) + <number of
    days> (NUMBER)Not necessarily, because if the duration is just a string representation of a number then it will be implicitly converted to a number and not cause an error
    e.g.
    SQL> ed
    Wrote file afiedt.buf
      1  with t as (select to_date('01/07/2007','DD/MM/YYYY') as start_dt, '3' as duration_days from dual)
      2  -- END OF TEST DATA
      3  select start_dt + duration_days
      4* from t
    SQL> /
    START_DT+
    04-JUL-07

  • How to check SAP Component version and what is the latest patch installed

    Hi Experts,
    Can you please tell me that how to check SAP Component version and what is the latest patch installed.
    Thanks

    there are 2 easy ways
    1) log on to SAp System, on menu bar, slect system > Status...
    2) log on to system URL and click on system Status...
    Thanks,
    Prasant K Paichha

  • How to fine the oracle version and bit info?

    I just want to find out the
    Oracle version
    Bit info (32 or 64....)
    and other system configuration about oracle
    Please help

    Duplicate post:
    how to fine the oracle version and bit info?

  • How to add the required characterists and key figures to drill down report?

    hi,
    i am creating a drill down report using t.code FKI4. however i noticed that some of the characteristics and key figures required by me is not listed in the report catalog. how can i add the required characteristis and key figures to the report catalog?

    Hi Inna,
    Based on my research, a drilldown report is a layout design that at first hides complexity and enables the user to toggle conditionally hidden report items to control how much detail data they want to see. Drilldown reports are used to change the report
    layout interactively. So it wouldn’t affect the rows displayed in the outmost group. Though some rows are hidden when the report is initially run, it will still count them. This is by design.
    Furthermore, if I understand correctly, you also expect the outmost group is a dynamic group depends on the drilldown action, right? As per my understanding, this function still cannot be achieved at this moment.
    Thanks for your understanding.
    Regards,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • SAP AIS Latest Version and License Cost

    I would be greatful if any one can guide me on SAP AIS Latest version and license cost for it.  As we are using SAP ERP ECC 6.0.

    Hi,
    I checked SAP Note 77503, and as per the information:
    As of SAP release 4.70, the AIS tool is integrated into the SAP_BASIS component. So logically you would not need a seperate license for the usage. The license for SAP ECC 6.0 should cover the same.
    Also the latest version of AIS would be dependent on SAP_BASIS component version. As per Note 754273  the following PFCG roles are required for usage of the AIS tool
    SAP_AUDITOR_SA  System audit
    SAP_AUDITOR_SA_CUS_TOL  System audit - Tables
    SAP_AUDITOR_SA_CCM_USR  System audit - Authorizations
    For more information, suggest you to contact security(at)sap.com.
    Hope it helps.
    Regards,
    Srikishan

  • How to add the zorin os and domain server 2008

    Since Zorin is just a flavour of Ubuntu you should be able to use any of the guides for adding Ubuntu to Active Directory. You can use Samba, Winbind, LikewiseOpen or another package to add it.
    Here is some more information: http://askubuntu.com/questions/33592/how-do-i-join-a-windows-active-directory.

    how to add the zorin os and domain server 2008
    kindly help as 
    This topic first appeared in the Spiceworks Community

Maybe you are looking for

  • Problem related to Alert

    Hi, I have a query related to Alert. I have configured the Alert Framework,checked mapping related errors it was generating the mails etc.So Alert framework is working fine for Mapping related conditions. Problem: I have defined a rule for receiving

  • Saving web gallery to Dreamweaver site

    I have created a web gallery in Adobe Bridge and incorporated it into my Dreamweaver site using an iFrame. When I preview the slide show in Bridge the slides are perfectly centered. When I preview the gallery in my site the slides are not centered. I

  • Status Field in Qualifications Window (HR Module)

    Hi All, What is the name of the lookup linked with 'Status' Field in 'Qualifications' Window? Thanx in Advance,

  • My photos collection is on YEARS....how do I switch it back to MOMENTS? Thanks

    I was messing with my photos when it got switched to YEARS. How do I return it to MOMENTS? Thank you. This is on my IPhone.

  • Mac: InDesign CC crashing after Flash Player update

    System: Mac OS X 10.8.4, Adobe CC (InDesign, Photoshop, Muse) running on a MacBook Pro retina from mid-2012. Yesterday, after the Media Encoder and DPS update, InDesign begun to crash and did not run. I already reported this in another thread. I rest