How to add/create additional page in Crystal Report Layout SAP B1

Hi,
I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
Pls help me to find the solution.
Br,
Thomas Marsetyo

Hi,
In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
Check this Link
http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
Regards,
Manish

Similar Messages

How to load a web page into crystal report

How can i load a web page into crystal report? pls help
Thanks in advance

Hi Sebastin,
You can't open a webpage in your Crystal Report, because all webpages will be executed in browser only. If you insert any webpage link in any documents it will not open in the same document, it will open in browser.
Hope this will help you
Thanks,
Sastry

How to add an extra page to the index.html page on dreamweaver CS6?

How to add an extra page to the index.html page on dreamweaver CS6?

Index.html = your domain's home page. There is only one home page per site.
To create a new page from your index, go to File > SaveAs > filename.html. Repeat for other site pages. Add links on your index page that lead to other site pages.
See Creating your first web site in DW CC (5-part tutorial)
https://helpx.adobe.com/dreamweaver/learn/tutorials/how-to/first-website-part1.html
Nancy O.

How to add another Chapter Page for more then 6 chapters & add right arrow?

Hello,
I created a project via the Magic iDVD option and it worked great and added multiple chapter pages for more then 6 chapters. Now, I manually added a submeno off of main and added 6 chapters but I need multiple pages since I have 40 chapters... I can't figure out how to add another chapter page and create a RIGHT ARROW navigation button for the next pages...
I also looked at the map view and see that on the working pages there is page connected to page... I also cannot find a way to add a page connected vi map view...
I have searched the forum but none of the answers were clear on how to do this... any help would be appreciated...
Thanks! T.

Adding the submenu is easy...making the button for it a "right arrow" is not.
You can keep adding submenus to other submemus by navigating to the appropriate menu and then choose the "add submenu" command from the iDVD project menu. This can be done in either normal or map view.
However, this creates a "folder" button, (or other things in some themes) not a right arrow. I agree it should be a choice! My 2nd best solution is to chage the folder button to a "text only button" and label it "More Chapters > >"
Another solution (3rd best??) is to use command-shift-4 when you are one one of your other menus that DOES have a right arrow, and take a mini picture of the arrow. Then choose one of the oval menu buttons on the button pane, and drag this tiny picture onto the button. Re-size it to make it close to the same size as your other buttons. It will have a funny edge on it from the button style, but it will look like a right arrow.
John B

How to add new tab page to equiment ?

Dear Guru's
i created the new equipement category K by coping the standard S.when i am creating the equipment while using equipment category S i am getting tab pages General,Location,organization,structure,Sales and Distribution.
But while using the equipment category K for creating the new equipment i am getting the tab pages General,Location,organization,structure 4 only.
why the 5 one Sales and Distribution is not coming ?
how to add new tab page like Partners ?In that fields like sold to party,ship to party ?
Could anybody help me in this regards
Thank you
suribabu

In Equipment category creation config in IMG, check for the View Profile for both the equipment category S & K.
For adding new tab, follow the IMG path.
PM & CS => Master data => Technical Objects => General Data => Set view profiles for Technical objects
Select the View profile which has been assigned to your equipment category & click Activity & layouts of views. In that screen, under seq.no, select the Partners.
Do the same for other requried tabs based on your requirement.
If there are same profile assigned to both equipment category, go to equipment creation creation => Edit => view selection. There you will find the required tabs.

Numbers creates additional pages

When I create a Numbers spreadsheet, how come there are additional pages that are printed when I print? How do I get rid of those. I only have data on one page, but at least 3 - 4 other pages print also.
I also don't know how to get rid of those faint grid lines.

Ming Ming,
When you check your work in Print View, as WWJD suggested, make sure that you have reduced the size of your table to just the minimum number of rows and columns necessary to hold your data, so that the table does not extend onto adjacent pages. Do this by deleting unneeded rows and columns.
To eliminate the faint lines, make all the Cell Borders White. Use the Inspector to select a weight and the color White for all the Cell Borders.
Regards,
Jerry
Message was edited by: Jerrold Green1

How to add two different page numbers in a single page

How to add two different page numbers in a single page? One is for page number of the whole article, the other one is for page number for each chapter in the article.

It's quite complicated, see
Two Page Numbering Schemes in the Same Document.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.

RE: How can I create a page break in a file?

Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

How can I create a page break in a file?

Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the following
two methods, but neither of them works. Specifically, it seems a special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);
-----------------------------------

Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

How do I create sub-pages in iWeb?

Hi, How do I create sub-pages in iweb like it does in this website
http://www.e-alliance.ch/index.php?id=405
with all the main menus "about us", "advocacy capacity", etc?
Thank you for your help!!!
Boaz

To create sub pages, just ensure that the main menu item is in the main menu and then for the sub pages themselves, ensure that they are NOT in the main menu and you link back by creating links instead.
For example, you could use Staff as a main menu item, so Staff would be in the main menu and then descriptions of different staff members would be underneath, but not in the main menu - they would have separate links that you create and then hyperlink.
If you want to make drop down menus in iWeb, as in the site that you linked to, you can't do this directly in iWeb itself. You have to make it and then upload various css files to your web host and link to it in iWeb etc. It is quite a complex task to create drop down menus in iWeb. If you want to do that, then I would suggest that you use a different app instead - take a look at http://www.everwebapp.com.

Can/How can I create a page with all my blog pages RSS??

Hello all.
I have a website containing many seperate Blog pages according to their topics like News, Tech and Scifi.
Is it possible to create a new page, that will contain the latest entries of all these blog pages a one "consolidated" page, maybe perhaps of RSS feed?
Thanks and cheers

Apple states
How can I create a page that aggregates my podcasts?
If you have multiple podcasts listed in the iTunes Store, the iTunes staff can create a single page that lists all of them in one place. We call this page an “artist page.” Note that a podcast can only appear on one artist page.
To request an artist page, navigate to one of your podcasts, click on Report a Concern, and select Remove a Podcast. In the dialog box, explain that you would like an artist page, give us the exact name of the artist (please don’t include “Inc,” “LLC,” etc.), and list the exact feed URLs or links to your podcasts.
at the bottom of this page
http://www.apple.com/itunes/podcasts/creatorfaq.html
I hope two is enough and if not that someone contacts me and maybe even changes the info on the above link.
Thank you for your input!

How can I create additional "Sent Mail" folders so that I can organize my sent mail along the same lines as the inbox? I use Mail v 4.5

How can I create additional or sub "Sent Mail" folders so that I can organize my sent mail along the same lines as the inbox? I use Mail v 4.5.

Thank you for your reply Don, but I had already gone through that procedure and it will only create new mailboxes for received mail. I want to create new mailboxes for sent mail, i.e. the first column being "to" not "from". Under the Mailbox menus there is an option "Use This Mailbox For" but all the options under that (including Sent) are greyed out. Unfortunately the View/Columns option to change from "From" to "To" changes all mailboxes not just the active one.

How do i create a page template in order to spawn new pages?

How do i create a page template in order to spawn new pages?

Where did you find the link/interface that led you to ask your question here?
You should find the forum for whatever product your question involves and post there.
Here is a link to a page that has links to all Adobe forums...
Forum links page:
http://forums.adobe.com/index.jspa

How do you create additional free space on the volume containing the iPhoto library? I have plenty of HD space.

How do you create additional free space on the volume containing the iPhoto library? When attempting to import images from a CD I get an "Insufficient Disk Space" message albeit there is plaenty of additional space on the hard drive.

How much free space do you have on your hard drive? Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

How to add/create additional page in Crystal Report Layout SAP B1

Similar Messages

Maybe you are looking for