How to add languages to Speak Selection on iOS

Hello,
I have purchased voice files on my Mac for a company called : assistiveware (http://www.assistiveware.com). Their voices are really good and much better then the native ones on my mac or in iOS. They are available system wide on my mac and I have been enjoying them for all sorts of things (reading pages etc.).
I would like to know how I can manually add these voices so that they appear in the "Speak selection" menu of my iOS device. Is that even possible? I assume there is some folder somewhere that keeps the voice files for my iOS devices... can I just drop these voice files in there?
Thanks,

Tom Gewecke wrote:
moriond wrote:
you might look into the Voice Dream Reader app.
Excellent app with great language coverage as well. It even has a free trial via the Lite version. Thanks for posting this!
Yes, if you want to read material without DRM in different languages with a spoken voice, Voice Dream Reader is a good alternative to using iBooks with VoiceOver's system voices. The app remembers your location, supports searching for text, bookmarking, and navigation within the file, and can be used for a wide variety of file types. It does not suffer from the current bug for PDFs where accented latin characters read by the system voices are pronounced without the accent. This is annoying if you're reading in a language that uses accented characters, and you don't have access to an ePub version of the same book. Voice Dream Reader also a good alternative if you want to read DAISY books with a spoken voice in non-English languages.

Similar Messages

How to change language in speak selection

Hello!
Once i bought my fourth gen ipod touch, default voice in "voice over" and "Speak selection" was British Eglish.
Some day i had to restore my ipod,and i did, after that default language was US English with female voice!
I found out how to change language in "Voice Over",even found Russian(no necesserity in using it, but its one of my native languages). Still "Speak sellection" was US English.
When i turn Voice over on, it speaks selection with right language, but it's very hard to operate every time to just hear pronaunciaton of one word(that could be spoken with submenu of "copy,paste,cut,define,speak")
So i'm wondering,why does changing language of "VoiceOver" not affect speak sellection in normal mode? and how to make it speak different languages?
Thank You!

first state:
"VoiceOver" language:British English (man voice)(i selected it by myself)
Speak selection ("VoiceOver"assist is ON) : British English.
State 2:
VoiceOver language:British English
Speak selection ("VoiceOver" assist is OFF) : US English (female voice)
BEFORE restoring "Speak seletion" language was British English by default.
and i want to know how to make it back.

How to add Change Layout, savelayout, select layout Button to ALV Toolba

How to add Change Layout, savelayout, select layout Button to ALV Toolbar?
Moderator message: please (re)search yourself before asking.
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
locked by: Thomas Zloch on Sep 10, 2010 10:57 AM

Variant
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
       EXPORTING
            is_variant          = gs_variant
            i_save              = c_save
          it_default_fieldcat =
       IMPORTING
            e_exit              = gf_exit
            es_variant          = gs_variant
       EXCEPTIONS
            not_found = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S'      NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF gf_exit = space.
      cf_varia = gs_variant-variant.
    ENDIF.
ENDIF.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save        = c_save
    CHANGING
      cs_variant    = gs_variant
    EXCEPTIONS
      wrong_input   = 1
      not_found     = 2
      program_error = 3
      OTHERS        = 4.
IF sy-subrc NE 0.
    cf_subrc = sy-subrc.
ENDIF.
Change Layout, savelayout, select layout Button pass the value which is in BOLD
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = gd_repid
     i_callback_user_command           = 'U_COMMAND'
     i_callback_top_of_page            = 'TOP-OF-PAGE'
                     is_layout                    = fld_lay
       it_fieldcat                  = fieldcatalog[]
                   IT_EXCLUDING                  =
                   IT_SPECIAL_GROUPS             =
                   IT_SORT                        = it_sort[]
     i_default                      = 'X'
     i_save                         = 'A'
     is_variant                     = gs_variant
     it_events                      = it_event[]
    TABLES
      t_outtab                      =    it_sales
                 EXCEPTIONS
                   PROGRAM_ERROR                     = 1
                   OTHERS                            = 2
Annasaheb

How to Add Push Button On Selection Screen

Hi Experts,
How to add Push button on Selection Screen.
Points will b rewarded for useful help.
Bohra.

Hi,
To create a pushbutton on the selection screen, you use:
SELECTION SCREEN PUSHBUTTON [/]<pos(len)> <push>
USER-COMMAND <ucom> [MODIF ID <key>].
The [/]<pos(len)> parameters and the MODIF IF addition have the same function as for the formatting options for underlines and comments.
<push> determines the pushbutton text. For <push>, you can specify a text symbol or a field name with a maximum length of eight characters. This character field must not be declared with the DATA statement, but is generated automatically with length <len>. The field must be filled before the selection screen is called.
For <ucom>, you must specify a code of up to four characters. When the user clicks the pushbutton on the selection screen, <ucom> is entered in the UCOMM of the SSCRFIELDS interface work area. You must use the TABLES statement to declare the SSCRFIELDS structure. The contents of the SSCRFIELDS-UCOMM field can be processed during the AT SELECTION-SCREENevent.
Ex.
REPORT DEMO.
TABLES SSCRFIELDS.
DATA FLAG.
SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE TIT,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT1 USER-COMMAND CLI1,
PUSHBUTTON 12(10) TEXT-020 USER-COMMAND CLI2,
END OF LINE,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT3 USER-COMMAND CLI3,
PUSHBUTTON 12(10) TEXT-040 USER-COMMAND CLI4,
END OF LINE,
END OF SCREEN 500.
AT SELECTION-SCREEN.
CASE SSCRFIELDS.
WHEN 'CLI1'.
FLAG = '1'.
WHEN 'CLI2'.
FLAG = '2'.
WHEN 'CLI3'.
FLAG = '3'.
WHEN 'CLI4'.
FLAG = '4'.
ENDCASE.
START-OF-SELECTION.
TIT = 'Four Buttons'.
BUT1 = 'Button 1'.
BUT3 = 'Button 3'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
CASE FLAG.
WHEN '1'.
WRITE / 'Button 1 was clicked'.
WHEN '2'.
WRITE / 'Button 2 was clicked'.
WHEN '3'.
WRITE / 'Button 3 was clicked'.
WHEN '4'.
WRITE / 'Button 4 was clicked'.
WHEN OTHERS.
WRITE / 'No Button was clicked'.
ENDCASE.
This example defines four pushbuttons on a selection screen that is displayed as a
dialog box. The selection screen is defined in a statement chain for keyword
SELECTION-SCREEN.
If the text symbols TEXT-020 and TEXT-040 are defined as 'Button 2' and 'Button 4',
the four pushbuttons appear as follows on the selection screen displayed as a dialog box.
Regards,
Bhaskar

HT2496 How to add language?

How to add language to mac dictionary?
I wanna search...
Korean-English
English-Korean
Chinese-Korean
Koran-Chinese
Japanese-Korean
Korean-Japanese
Greak-Korean
Korean-Greak
ETC.
Please, Help me.
I useing 2009, Macbook Pro 13'

See this note:
http://m10lmac.blogspot.com/2011/12/more-dictionaries-for-dictionaryapp.html

How to add language to a 9780 using Mac desktop software

Hi, I recently updated my Bold 9780 on Mac and the updated deleted all my languages, I need to know, how to add language using mac desktop software.

Hello hjmatias and welcome to the BlackBerry Support Community Forums.
You can use the Desktop Software for Mac, available for download at www.blackberry.com/mac to install additional languages.
Here is an article from the BlackBerry Technical Solution Center that will take you through the steps to add applications: KB19937
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to add languages to the "Correspondence language" in People form

Hi,
Can anyone help me how we can add languages to the "Correspondence language"
Navigation will be as follows
People form > Other tab
Thanks

Hi,
The values in that field come from FND_LANGUAGES_VL view. The data in this table is seeded by Oracle and you are not supposed to add/delete/update records in this table.
In case the languages that you want are not available, you may create an attribute in Person DFF to capture correspondence language and the list may show values from a custom value set.
Hope this helps.
Regards,
Manish K.

In table view, how to add one button for selecting page?

Hi Experts,
In the OBIEE 11.1.1.6, we have one uncommon requirement that customers want to randomly select actual page to view expected data in table view.
For example:
We make use of some columns to create one report in table view, and set 'Rows per Page' equal to '5',
if this report contains 60 rows, it will have 12 pages, so customers want to select sepcial page number to view the some data. Is it possible to implement this requirement? Maybe we should write JS code.
Note: Below table view, it has four buttons: First Row, Previous Row, Next Row and Display (500) rows in per page. So we want to add one button to select per page.
We look at orgnial codes in WebBrowse, but do not know the following codes derive from which JS file.
Could you please tell me how to find this file?
<td class="TapeDeckCell"><img class="TapeDeckImage" onclick="" onkeypress="" src="res/s_blafp/viewui/pivot/first_dis.png" title="" alt="" ><img class="TapeDeckImage" onclick="" onkeypress="" src="res/s_blafp/viewui/pivot/previous_dis.png" title="" alt="" ><img class="TapeDeckImageEna" onclick="PTRowScroll('saw_5083_b','5','5', event)" onkeypress="PTRowScroll('saw_5083_b','5','5', event)" src="res/s_blafp/viewui/pivot/next_ena.png" tabIndex="0" onmouseover="PTTD(event, 'res/s_blafp/viewui/pivot/next_ovr.png');" onmouseout="PTTDO(event)" onmousedown="PTTD(event, 'res/s_blafp/viewui/pivot/next_dwn.png');" title="Next 5 Rows" alt="Next 5 Rows" ><img class="TapeDeckImageEna" onclick="*PTRowScroll*('saw_5083_b','-1)', event)" onkeypress="PTRowScroll('saw_5083_b','-1)', event)" src="res/s_blafp/viewui/pivot/showallrows_ena.png" tabIndex="0" onmouseover="PTTD(event, 'res/s_blafp/viewui/pivot/showallrows_ovr.png');" onmouseout="PTTDO(event)" onmousedown="PTTD(event, 'res/s_blafp/viewui/pivot/showallrows_dwn.png');" title="Display maximum (500) rows per page" alt="Display maximum (500) rows per page" > <Span class="TapeDeckRecords">Rows 1 - 5</Span></td>

Hi Kobe,
Thanks for listening me.
I agree 11g have some issues unlike 10g. I've tried the same by creating a measure rcount(1) and name it as Page in RPD. I just pulled column Page in pivot table section 'Pivot Table Prompts' it is working but this may not answer your requirements.
I would suggest to use the column in Prompt and go by between operator to allow user to select the rows between.
In the report make Page as prompted.
If you are okay with this can look forward to tweak it further, like values in the prompt multiple of 5 or 10s some thing like that.
let me know updates on the same.

How to add multiple annotation in selection one by one

Hi,
I want to add annotation one by one to selection thru code. I tried to use
AVDocSetSelection (avDoc, ASAtomFromString(
"Annotation"), (void *)pdAnnot, true);
but this clear the previous selection.And I am not able to add multiple annotation. So I want to know how we can do this?
Regrads
Arvind

Hi,
But I am also getting problem when I try to select/highlight multiple annotations in one shot. I am using below code to do that.
PDAnnot pdAnnots =( PDAnnot)ASmalloc( numAnnots* sizeof(PDAnnot));
for(int i=0; i< numAnnots;i++)
            pdAnnots+ = list+;
        if(numAnnots > 0)
            AVDocSetSelection (avDoc, ASAtomFromString("Annotation"), (void*)pdAnnots, true);
But this selects only ONE annotation instead of all. Could you please help me why it is doing like that?
Thanks in advance,
Arvind

How to add Drop Down City Selection Menu?

How is the best way to add a Drop Down City Selection Menu to my site next to MyCITY logo? This page should be selection on Los Angeles (w arrow icon next to it), but I need 4 other city choices. It needs to drop down like RESTAURANTS with an arrow. Not sure the best way to approach this.
http://www.tammyfarringtoncreative.com/test/index.html
Thanks, Tammy

Are you looking for a form select list?
http://www.w3schools.com/tags/tag_select.asp
Nancy O.

How to add multiple columns using select statement

Hi friends
i have two TABLES
one table Contain only unique Agent code(23,45,56,88)
second table contain same Agent Code,orderdate & sum(amount)
now i want to add columns in table 1 according to date and update the amount in that column
for example if i select start date 1st july 2014 and end date is 15 july 2014
then i want result
select agentcode,amount as 01july2014,amount as 02nd july2014 up to 15th july
Please HELP.....

>> I have two TABLES <<
Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. Temporal data should
use ISO-8601 formats. You failed on this too! Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums. Ignorance is fine, but why do you have bad manners? The rules are posted at the front of the forum!
>> one [nameless, unknown] table Contain only unique Agent code(23, 45, 56, 88) <<
You do not know the difference between a code and an identifier!
CREATE TABLE Agents
(agent_id INTEGER NOT NULL PRIMARY KEY);
>> second table contain same Agent Code, order_date & SUM(order_amount) <<
Wrong again! The SUM() is an aggregate function and cannot be in a column. Tables have keys
CREATE TABLE Orders
(agent_id INTEGER NOT NULL
REFERENCES Agents(agent_id),
order_date DATE NOT NULL,
order_amt DECIMAL (8,2) NOT NULL,
PRIMARY KEY (agent_id, order_date));
>> now I want to add columns in table 1 according to date and update the amount in that column <<
NO! The running total is a computed column. We do not store them.
>> for example if I select start date 1st July 2014 [sic: 2014-07 -01] and end date is 15 July 2014 [sic: 2014-07-15] <<
If you have ever read a book on SQL, you would know the correct display format for dates! It is the only one in the ANSI/ISO Standards.
SELECT agent_id, order_date,
SUM(order_amt)
OVER (PARTITION BY agent_id
ORDER BY order_date
ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW)
AS order_amt_runtot
FROM Orders
WHERE order_date BETWEEN '2014-07-01' AND '2014-07-15';
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

How to Add fields in dynamic selection LDB BRF

Hi All,
I have requirement to add a field BSEG-ZLSCH in Logical Database BRF dynamic selection.
I have tried doing the same by using below mentioned link but its not appearing in the report dynamic selection screen
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e0039a-0d79-2c10-0aaf-9f6c062c0ffb?quicklink=index&overridelayout=true
Could you please help me a Legal change delivery is pending due to this issue.
Thanks and best regards,
Niteesh Rai

Dear Niteesh,
The Logical Data Base BRF reads table BKPF and BSEG, but there is no
option to include fields from BSEG in the dynamic selection.
You can display all the tables included in BRF, but only fields from
BKPF could be included in the dynamic selection. You cannot add
entries from BSEG, BSET, KNB1, KNBK, and so on that are listed here.
You are right, there is not note that explains this behaviour, but I
inform you what is the system design. This has been confirmed by my
Development colleagues.
Regarding to note 832997, this is valid for releases 500 and 600 when
New G/L is available. The system functionality has been enhanced in
release 500 so you can add fields from FAGLFREESEL that is similar
to BSEG with New G/L.
BR, Hana

How to add language arabic for nokia asha 501 rm-9...

product code 059S9Z8

you bring your Nokia Asha 501 to a local but genuine Nokia Care Centre,
you explain your issue and
they do the rest.
Which step creates trouble?

Ipad 4 how to add event for every 4 weeks ios 7

This is a monthly appointment but it's on the same day at the same time. How can I add this to the calendar? Thanks.

I would also have a look at Pocket Informant, this is a significantly more sophisticated calendar / task manager than the inbuilt calendar but it does cost.....
I have used it for about 5 years both on the iPhone / I pad and an HX 4700 and it is just brilliant.
Xerxers

To add Language selection option on Selection Screen

Hi All,
I have one Report Writer Report.
In that Report I have created Basic Sets, Single sets and Multi Sets for G/L Account.
I need to output this Report in two different language.
1) Engish
2) Chinese
But I need to put the option on Selection Screen for Language Selection (whether English or Chinese).
How to add this option on Selection Screen. Please Guide me soon.
Regards,
Rishi

Hi Ashok,
But when I hev created the sets, I have given the description of G/L Accounts in English. But when I will run the Report using Cinese as Logon language, how output will come in Chinese.
1) Is there a need to maintain /L Accounts in Chinese language.
2) or Shall i create the sets by giving description for G/L Accounts in Chinese If Yes then how to hadndle at run time..
please guide I am new to Report writer.
Regards,
Rishi

How to add languages to Speak Selection on iOS

Similar Messages

Maybe you are looking for