How to add new fields to a data extract

The following data extract program generates an output file which is displayed using a publisher template as a check format report.
Oracle Payments Funds Disbursement Payment Instruction Extract 1.0
How would I add new fields to the generated file? In other words what is the procedure to add new fields to the data extract?
Thanks

Do anyone pls advise how to customize the payment extraction program? We also have the similar requirement to extract extra fields to format a payment file.

Similar Messages

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

How to add new fields in asset master data

Hello,
i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
Thanks.
Pedro

Hi Pedro,
SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
You can configure them @ the following 3 nodes in IMG:
Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
Regards,
Vishal Thakur

How to add new fields to the system form (Ex.expenses to a/r invoice form)

hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQ

If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

How to add new fields in SAP-Query

Hi,
Can any body tell how to add new fields to the existing query.
Thanks a lot,
Bhaskar.

hi,
when we create internal tables like. in final table you can include the extra fields.
data : begin of itab_mara,
         matnr like mara-matnr,
         erdat like mara-erdat,
         end of itab_mara.
data : begin of itab_marc,
         matnr like marc-matnr,
         werks like marc-werks,
         end of itab_marc.
data : begin of itab_final,
         matnr like mara-matnr,
         erdat like mara-erdat,
         werks like marc-werks,
         date like sy-datum,
         status(10) type c, * new fields
         end of itab_final.
<select statement>.
Append all the fields to itab.
loop at itab_final.
write :/ itab_final.
endloop.
Reward with points if helpful.
Message was edited by:
        Vinutha YV

How to add new field into dynamic internal table

Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30).    "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
   here i want to add one more field into <TAB> at LAST position and my
   Field name = field_stype     and
   Field type    = 'LVC_T_STYL'
could you please helpme out .

Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
               <fs_dyntable>,                     u201C Field symbol to create work area
               <fs_fldval> type any.              u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c.                     u201C Input number of columns
DATA:   t_newtable TYPE REF TO data,
        t_newline TYPE REF TO data,
        t_fldcat   TYPE slis_t_fldcat_alv,
        t_fldcat   TYPE lvc_t_fcat,
        wa_it_fldcat TYPE lvc_s_fcat,
        wa_colno(2) TYPE n,
        wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
    CLEAR wa_it_fldcat.
    move sy-index to wa_colno.
    concatenate 'COL'
                wa_colno
           into wa_flname.
    wa_it_fldcat-fieldname = wa_flname.
    wa_it_fldcat-datatype = 'CHAR'.
    wa_it_fldcat-intlen = 10.
    APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = t_fldcat
    IMPORTING
      ep_table        = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
    index = sy-index.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
Set up fieldvalue
    CONCATENATE 'VALUE' index INTO
                fieldvalue.
    CONDENSE    fieldvalue NO-GAPS.
    ASSIGN COMPONENT wa_flname
        OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
    <fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
    CLEAR wa_cat.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
    wa_cat-fieldname = wa_flname.
    wa_cat-seltext_s = wa_flname.
    wa_cat-outputlen = '10'.
    APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_fieldcat = fs_fldcat
    TABLES
      t_outtab    = <t_dyntable>.

How to add new fields in Reduced message ( in BD53 )

Hi Experts,
How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
Thanks,
Ninad

Hello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S.

How to add New field in SMART forms.

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

11.5.9/OAF 5.7 : how to add new fields in iProc "search results" page

We need to add new fields into iProc "search results" page - "Personalize Self-Service Defn" is et, we can enter the personalization screens (from both the "master" link at top/right page level or from the link above the region) - anyway cannot find how to add new fields. Do we have to go to AK developer and/or XML files or is it feasable from OAF (as it is with 11510) ? TIA.

It depends on what fields you want to add.
1. If Oracle has included the fields, just render them via personalizations
2. If they are brand new fields:
a) you will need to extend the VO (I do not know the exact name).
b) change the query to get your extra db columns if necesary
c) add transient attributes to the VO and map them to b).
d) Then you need to add the items via personalization and map them to the attributes you created in c)
Check on metalink for the lates version of OAF Dev Guide and Personalization guide.
Thanks
Sandeep

Query: How to add new fields in ABAP query?

Hi All,
Can any one tell me how to add new fields in the ABAP query output?
We have to add the new fields using query design or we have
to add those in the background program(automatically generated behind query) by selecting new fields in the code?

What kind of report? Usually, you have to add the field in the table declaration and then also in the SQL query. After that, include the field in what kind of report you are using.

CRM IC Winclient - How to add new fields in the BP Search of TRX CIC0

Hello Experts,
I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
Can you help me?
Thanks in advance.
Caíque Escaler

Hi
make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
in spro in Define customer-specific search control -> mark fields with X.
and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
Regards
Radek

How to add new fields to picklist of search criteria for opportunities

Hi Friends,
Could you please tell me how to add new fields to the picklist of search criteria of Opportunities in WEBCLIENT(CRM 2007).
Regards,
Vijay

Dear Vijay,
We are facing the same problem over here.
Have you managed to find a solution? Please share
BR,
Rohit

Add new fields in Additional data tab B in Inquiry,

HI,
I want to add additional new fields in inquiry on the addition tab -B, like
Architect Name
Contractor name
followed By
referenced by like this, and want to capture the report on these fields
plz guide
thanks in advace

Dear Rishi,
Please Don't post multiple threads for same issue(i.e Add new fields in Additional data tab B in Inquiry).
Try with these User Exits,
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
I hope this will help you,
Regards,
Murali.

How to add new field to table control data not displayed

hi
I have added some nwe fields to already existing table control added three new fields...
though the recoreds are inserted in teh table properly with the three new fields user id data and time fields
but on display only the data is not shown in these three columns though the data is coming in internal table...but not to the screen output
pls suggest where the problme may be
nishant

First try the small button Configuration on top right of the table control, as displayed when you run the program. Hit 'Administrator' and see if the fields are checked as invisible. Uncheck them, activate and save.
If the fields are not in that list at all, then check if the table control is initialized for the screen you use. For example
CONTROLS: tc_ent_lines TYPE TABLEVIEW USING SCREEN '0100'.
but you copied your screen and use the same table control in the new screen 0200. Then all you have to do is
REFRESH CONTROL 'TC_ENT_LINES' FROM SCREEN '0200'.
before you show the screen.

How to Add new fields to Shopping cart?.

Hi SRM GURU'S,
I am using SRM 5.5 and ECC 6.0 and Extended Classic scenario.
As per business, I want to add New fields to Shopping cart. How can I add?. Please any one give me clear details about this
I am planning to add 2 fields 1. Commitment Item and 2. Fund center. in Cost Assignment tab. Is it possible?. This data has pass to follow on documents. Backend documents has this provision. Is this option available in Shopping cart?. If yes please give me the details.
Kindly respond quickly. Thanks in Advance.
Regards,
John.
Edited by: johnmiller465 on Sep 22, 2009 1:13 PM
Edited by: johnmiller465 on Sep 22, 2009 1:18 PM

Hi Deepti/Shital,
Thank you so much for your reply. I have awarded points. One more question. While creating creating PO from Process Bid Invitation, PO is not replicating into ECC. Do you have any idea?. Please help me to findout. Respond quicklly
If it will not replicate, how to create backend PO refering with SRM PO.
Regards,
John.
Edited by: johnmiller465 on Sep 23, 2009 11:53 AM
Edited by: johnmiller465 on Sep 23, 2009 11:55 AM

How to add new fields to a data extract

Similar Messages

Maybe you are looking for