How To Add New Key Figure in Manual Planning

Dear All
Please Help
I Already implement BPS for 2 year.
Now user want to add new key figure in Cube.
I already add new key figure to cube and activated it.
But in Manual Planning, The new key figure not show in selection
what I must do?
Please Help.

not all key figure types are supported in BPS.
1. All key figure types must have aggregation SUM, SUM.
2. Supported key figure types:
- amout
- quantity
- number (integer, float, dec)
- time, only type DEC
- datum, only type DEC
All other key figures are filtered out and are not available in BPS.

Similar Messages

  • To add new key figure in existing info cube (BI 7.0)

    I m using BI 7.0
    How can I add new Key figure in my existing info cube?

    check the following the links
    thread's regarding remodeling
    Remodeling Toolbox
    Remodelling option in 7.0
    hope this help you
    happy new year 2008
    harikrishna N

  • Adding new key figures to DP planning area

    I am using APO DP.
    When adding new key figures to a planning area, is there any way of avoiding having to deinitialise and then re initialise the planning area?
    Thanks for any advice on this...

    First of, let us know which version of DP are you using.
    If you are using 7.0, all you need to do is right click on your planning area and select Change Keyfigure setting and you should be able to update the key figures there.
    The below is from SAP help for SAP APO 7.0, you should be able to add the key figure without deinitializing the planning area.
    Key Figure Settings
    Here you can change the properties of the key figures of a planning area, if the planning area has already been initialized. You can also add or delete key figures. However, you can only delete key figures that are no longer used in planning books, data views, macros, or demand forecasts. You can find out in which objects a specific key figure is used with the where-used list.

  • How to add new product in interactive demand planning(IDP)

    Hi gurus,
    How to add new product in interactive demand planning(IDP), can you suggest me, when i click data view in IDP, it will show new product.

    Hi Raj,
    Since the New Product is already in MPOS what you need to do in your Data view is to go to "Selection Window" on the left side of the screen(make sure you dont click on the existing selection ids). Select Product at the top, the planning version will come in the next row and then you again select the Product as charateristic and enter the New product name against the Product(Characteristic) and then save it in case you want it to use for your future references. When you will double cilck on the newly made selection id you will be able to see you product with the keyfigure details in right side.
    Please let me know if it works.

  • Hi Gurus, To Add New key figure in BW 3.5 flow ODS- Infoset

    Hi Gurus ,
    I have rquerimennt to add a new  keyfigure in ODS and then into  Infoset .  The histrorical data for this keyfigure is not needed . Can you please let me know what the are changes needed to be done in Transfer structure -> cs->updaterules->ods->infoset.
    should i delete data from dso before I add keyfigure?

    are going to get the values for the new key figure from source or is it going to calculate in BW side?
    If yes, then add that key figure in source DS, replicate the same BW system.
    Now add this key figure to your ODS and activate.
    create transformation for this. and activate.
    as this is key figure, you will get data for this in info set automatically.

  • Add new key figure to an Infocube

    Hi Experts
    I need add two new key-figure to the Infocube with data.
    Can I do this, or I need have an empty cube in order to made the changes?
    Thank you in advance!

    Yes the same, no need to delete data unless you recategorize the existing characteristics the same is true for the ods too. Adding is not issue, only removing.

  • Add new key figure with characteristics in report painter

    Hi expert,
    I am create a new report painter in GRR2 under report group 8A2 (EC-PCA: Standard Reports) and i would like to create a report show on G/L amount with segment.
    When i click on first column to assign "key figure with characteristics" i am not able to find characteristics "segment".
    Please kindly advice how to create in new characteristics in report painter?
    p/s : profit center number is same with segment number
    ng chong chuan

    "segment" is not a characteristic of classical profit-center accounting (libraries 8A*). Its a New GL characteristic, thus create a report painter report for New GL library.
    best regards, Christian

  • Calculated key figures in manual planning

    I'm trying to set up a Material Planning system using BPS.
    One of the requirements my customer wants is that in the manual planning he can both modify a multiplier as well as one of the resulting amount key figures.
    The multiplier is used to calculate the consensus amount based on a consolidated amount.
    In my manual planning I have the possibility to allow input on the multiplier as well as the consensus forecast (that has been calculated upfront). Now I need the consensus forecast to change when th multiplier is changed.
    How can I best tackle this? (Yes, I'm fairly junior to BPS...)
    Thanks for any guidance in this matter.

    Hi Eric,
    to give business the most flexible solution, allow them to manually change the multiplier or the result and provide two planning functions (FOX). One for calculating the result from the multiplier, and one for the reverse. Then the user can choose which direction they want to go.
    SAP NetWeaver RIG

  • How to add new key lookup in Mapping ?

    I am learning OWB 10g from site. I am following the Oracle-By-Example.
    My OWB version is:
    OWB Client     :
    OWB Repository      :
    But the screenshots are different than what I am getting on my OWB. Am I using the correct version of Oracle-By-Example?
    I have created Mapping Dimension and Mapping Table. Now i want to add a Mapping Key Lookup. But as the screenshots shown in Oracle-By-Example are different, I cannot go further.
    Please help me.

    Hi Yogini
    Here are some steps, it should be fairly straightforward, you can view the online help for more information.
    1. Drag and drop the Key Lookup operator on to the Mapping Editor.
    2. The Lookup wizard opens on the Welcome page. Select Next to move to page 2.
    3. Provide a name and description for the operator, default is KEY_LOOKUP. Hit Next to move to page 3.
    4. On the Groups page, hit Next.
    5. Select attributes to use in key lookup. For example those from the WAREHOUSES table in the OBE you are using that you will lookup in the COUNTRIES table. Shuttle those attrbutes to the right hand side. Hit Next to move to page 4.
    6. Select the COUNTRIES table from the combo box nder 'Select the object which has the lookup result. In the lookup conditions table ensure the matching criteria is set ie . LOCATION_ID from WAREHOUSE matches with LOCATION_ID from COUNTRIES. Hit Next to move to page 5.
    7. Here you can define the strategy for matches, just hit Next, then Finish. You have walked through all pages and are complete.

  • Add new key figure and characterstic into cube without touching historical

    Hi ,
    I have cube in prodcution which has historical data of last 4 years .
    Now buisisness is asking me to add one keyfigure and and one characterstic to cube without tcouchingand next load these 3 fileds to be populated .
    is it possible to this ?
    Please let me know

    check the blog by Nagesg Ganisetty regarding remodelling option available in 7.0.
    thats a good blog and very informative.

  • Add of new key figure.

    is it possible to add new key figure in the planning table of the ICH.
    for ex. there are key fig like demand, planned receipt, firm order in the SMI Monitor (Supplier view of ICH) i want to add new key fig in that it possible..
    Plz suggest...
    Thanks in advance..

    Hi Rupesh,
    Were you able to achieve this? I would be really thankful if you could jot down the steps you followed towards achieving this.

  • Addition of new key figure in ODS

    Dear all,
    In ODS, delta is loaded everyday through process chain. Now according to business requirement, we need to add one more key figure in it. I don't have to map it with any of the R/3 field. Only i have to create update routine to assign value in it using already existing key figure.
    Can i directly add new key figure in the ODS? Will it affect my data present in ODS as well as daily delta load process?
    If i can do this, can i assign exact 'key figure' value for the existing data also?
    Please guide me for the same. We are using BW 3.5.

    I am not sure that it is true that you need to delete data.  I am sure one can add a field to the ODS without deleting it.  The field will remain blank after creation, unless you fill it:
    1.  manually using a flat file for past data; mapping will work for subsequent data
    2.  Use a self reference if the value is already present in another key figure.
    The change may take a long time to activate depending on the following:
    1.  Size of the ODS
    2.  Existence of indexes.
    However,  as you are running a delta you need to be careful of the delta queue if you also intend to touch the datasource.

  • How to append DATA_PACKAGE strucutre to include new key figures?

    Iu2019m a newbie to ABAP and need some help with a start routine in BW 3.5
    In the source DSO I only have  the u201CYTD amountu201D key figure. The destination DSO should also contain the key figures u201CCurrent month amountu201D (ZAMTMO) and u201CLast 12months amountu201D (ZAMTLTM). So in the transfer rule I want to have a start routine to do some calculations and add the 2 new key figures.
    I use an internal table LCYEARDATA do the calculations:
      DATA: LCYEARDATA type sorted table of /bic/aZHYP3_O00
            with unique key CALMONTH /BIC/ZHYP_ACC /BIC/ZHYP_ENTI
            with header line.
    *Get the YTD This Month.
            WITH KEY
          IF sy-subrc IS INITIAL.
    *Last 12 Months = (YTD Last Year - YTD Month Last Year) + YTD This Month
         modify DATA_PACKAGE.
    Since the DATA_PACKAGE have the same structure as the source DSO, and donu2019t contain the new key figures, I canu2019t add the new calculated key figures at the end of the loop. I get an error message saying that ZAMTMO and ZAMTLTM canu2019t be found.
    So the basic question is: How do I append the structure of the Data Package so it can include the new key figures?

    Hi Karsten,
      Similar post... have a look...
    Re: data package error
    DATA: varighed TYPE i.
    LOOP AT DATA_PACKAGE into wa_temp.
    varighed = 100.(<b>What this means....?? condition..?</b>)
    wa_temp-/bic/iotvarig = varighed.
    wa_temp-/BIC/IOTOBJFOR = 'TEST'.
    -->> <b>you have to write modify wa_temp</b>.
    modify wa_temp.
    LOOP AT wa_temp.
    Hope it Helps

  • Add update rule for new key figure in one info struc

    Hi, everyone
    I would like to know how to add update rule for new key figure in one info struc.
    Thanks ahead.

    1)I have created the update rule for one info structure
    2)add one key figure in the info structure due to business requirement
    3)then I use MC25 to add update rule for the new key figure, but I find that there no relevant menu to do such operation.
    Can anybody tell me how to do with it?
    Any answer will be appriciated.

  • Adding a new key figure to Info Cube

    Can I add a new key figure to an existing Info cube in which data is loaded?
    Assume that In Info Cube we have the following.
    Stu Id -- Characteristic
    Maths , Physics , Chemistry -- Key figures
    These are the info objects which are already available and transfer rules are already available for the same in the infosource.
    Could any one let me know how to add one more new key figure (total ) , which is the sum of the three marks to the Info Cube and populate the data in to the same.
    I have tried the following steps ,  but could not get the solution.
    1). Create a new key figure info object (total).
    2). Add the same to the communication and pull the same into transfer rules of the existing info source and activate the same.
    3). Add the new key figure to the info cube.
    4). Open transfer rules for the info cube and change the mode from NO updation to Addition for the particular key figure (total).
       When I perform the 4th step it is giving a red symbol beside the key figure in update rules and I'm not able to activate the same.
    Any help on how to add key figures to update rules and transfer rules is highly appreciated and points would be assigned.

    1.add new Keyfigure to Infocube.
    2.Go to Update rules> go to update type of that Keyfigure>selct formula in update method>create new formula>here you can add up your 3 keyfigures-->OK.
    activate update rules and InfoProvider.Check all are active or not..
    by using Export generate datasouce ,you populate data(historical data)  to new keyfigure as well.Then you have to delete historical data requests.
    or iyou can create formula in query designer as well as srinivas suggested.that would be better option.

Maybe you are looking for

  • Battery icon not moving when charging

    basicly like it says has been pluged into a wall and my computer both for a day. the battery chargeicon is stuck maybe battery is dead. When i plug it into my computer my computer does not recognize it

  • Need some documentation on CRM middleware

    Hi, I need some really good documentation on middleware, can anyone please give me some links. Regards, Kamesh Bathla

  • My iTunes Library/Playlist Just Disappeared

    Hello, I hope you are well. I have been using iTunes for years without any major problems. Today, it was fine during the afternoon, but after I shut it down and turned it back on, iTunes greeted me with the screen telling me to add songs to my Librar

  • Is PLM an add-on to ERP (ECC)?

    Please help with this . Thanks!

  • Calculate a sum by date

    I had an Excelsheet imported in siena. First column is Date (01/01/2011 for example) - second column is a Value. For each day i have one row and each new day i add one value. (Date and Value) In siena i would like to calculate a sum from the beginnin