How to add Stardict dictionary [Solved]

Stardict came with Chinese dictionary. I wanted to install more dictionaries in other languages. So, I have downloaded some dictionaries from http://reciteword.cosoft.org.cn/stardic … rdict-dic/
I unzip the file and got .dict.dz file. And I made ~/.stardict/dic directory and moved dictionary directory to ~/.stardict/dic. However I could not find the dictionaries in Stardict > Manage Dictionaries > Manage Dict. I also try to /usr/share/stardict/dic directory. It didn't work either. Anyone knows how to add more dictionaries to Stardict?
Last edited by since1992 (2010-09-28 11:31:01)

I figure it out myself. The downloaded a dictionary had problems. When I extract the file, there were not .idx and .ifo files. There was only .dict.dz file. That's why Stardict could not detect dictionary automatically. I spent about 5 hours until I realized that I needed .idx and .ifo files with .dict.dz. I hope no one get this trouble like me. Thank you.
Last edited by since1992 (2010-09-28 11:30:40)

Similar Messages

  • HT2496 good day, could you guide me on how to add more dictionary in my Macbook pro

    good day, could you guide me on how to add more dictionary in my Macbook pro

    You'll have to use iTunes on your computer or buy music using the iTunes app on your phone.
    Check these articles for more info:
    iOS: Syncing with iTunes
    iTunes: Syncing media content to iOS devices and iPod
    iTunes on your MacBook can import music files or your CD's into the iTunes library. After that you can sync the content of the iTunes library on your Mac to your phone.

  • How can I add a dictionary to when you use "Define"

    When you use Define on a word in the definition bubble at the lower left is "Manage". Touch this to get a selection of Dictionaries to download.
    I need to know how to add a dictionary to that list, so I can reference more dictionaries. Medical or linguistic definitions.

    Thank you sounds like this is a very useful app. I would like to use Dictionary.appender, but iTunes in the USA won't allow me to download this app. Is there a way to get past this restriction and download this app here in the USA?

  • 1.) How do you find the dictionary in Apple Mail Program?  2.) How do you add another dictionary?

    1.) How do you find the dictionary in Apple Mail Program?  2.) How do you add another dictionary?

    Hello James!
    I do not have any ABAP Instance, only the JAVA one.
    Therefore the ABAP transactions are quite useless.
    The problem tables are created by people working on the CAF layer.
    They have developed and deployed some homemade applications and this is leftovers from their development in some kind of way.
    Anyone with any ideas?
    Could it be that (yet) some special Portal Dictionary Role needs to be asigned to the Administrator?
    /Lasse

  • I accidentally clicked add to dictionary on a misspelled word when I was trying to click the right spelling for it. How can I undo that so it will catch the misspelled word?

    I accidentally clicked add to dictionary on a misspelled word when I was trying to click the right spelling for it. How can I undo that so it will catch the misspelled word?

    You need to edit a file in your profile folder, for details see [[using the spell checker]].

  • How to add docentry with some num.?can you solve below query   Declare @a as Numeric SET @a=14900000; SELECT (@a+($[@MAINTDCHEAD.DocEntry])as 'series no'

    how to add docentry with some num.?
    can you solve below query
    Declare @a as Numeric
    SET @a=14900000;
    SELECT (@a+($[@MAINTDCHEAD.DocEntry])as 'series no'

    Hi,
    Yes possible.
    Try this:
    Declare @a as INT
    SET @a=14900000;
    SELECT (@a+($[ORDR.DocEntry]))
    Thanks & Regards,
    Nagarajan

  • [SOLVED] How to add modules to build with the kernel?

    Hello i´m trying to learn how to build my own custom kernel and doing it the arch way https://wiki.archlinux.org/index.php/Ke … raditional. But unfortunately dm-crypt was not included in the kernel so it all failed.
    svart_alg% sudo mkinitcpio -k 3.15.6 -c /etc/mkinitcpio.conf -g /boot/initramfs-test.img
    ==> Starting build: 3.15.6
    -> Running build hook: [base]
    -> Running build hook: [udev]
    -> Running build hook: [autodetect]
    -> Running build hook: [modconf]
    -> Running build hook: [lvm2]
    ==> ERROR: module not found: ‘dm-snapshot’
    -> Running build hook: [encrypt]
    ==> ERROR: module not found: ‘dm-crypt’
    -> Running build hook: [block]
    -> Running build hook: [filesystems]
    -> Running build hook: [keyboard]
    -> Running build hook: [fsck]
    ==> WARNING: No modules were added to the image. This is probably not what you want.
    ==> Creating gzip initcpio image: /boot/initramfs-test.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    I have never don any of this before and have no idea of how to add a missing module to the kernel i´m building. So i search on internet and had a very hard time finding a good guide for this but i fond one possible solution. https://www.kernel.org/doc/Documentatio … odules.txt
    svart_alg% make -C /home/nigro_alko/Kernel/linux-3.15.6 M=/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in
    make: Entering directory ‘/home/nigro_alko/Kernel/linux-3.15.6‘
    mkdir: cannot create directory ‘/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in’: Not a directory
    scripts/Makefile.build:44: /home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in/Makefile: Not a directory
    make[1]: *** No rule to make target ‘/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in/Makefile’. Stop.
    Makefile:1310: recipe for target ‘_module_/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in’ failed
    make: *** [_module_/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in] Error 2
    make: Leaving directory ‘/home/nigro_alko/Kernel/linux-3.15.6‘
    So is there any one that have time to help a lost little newbie i would bee very happy  :-)
    Last edited by Moosey_Linux (2014-07-29 15:00:40)

    karol wrote:Why do you want a custom kernel in the first place?
    Moosey_Linux wrote:i´m trying to learn how to build my own custom kernel
    Reason enough IMO. But anyway... you refer to the Traditional build method in the wiki, but is it possible you didn't really read it? Or maybe you only skimmed it? Did you run make menuconfig? Did you try to build everything in instead of using modules? That mkinitcpio output suggests that you did.
    As suggested there for first-timers, it's a good idea to start with a kernel configuration that is known to work - the Arch config is the obvious choice, but there are other sources e.g. http://kernel-seeds.org/ .

  • [SOLVED]How to add multiple gateways in Arch

    Hi, can someone please advise how to add multiple gateway address for multiple interfaces.
    In my case I have two wired LAN cards. I use Arch network daemon to manage my NIC's.
    I know in Gentoo it could be done through : 'gateway_ethX=( "default gw xx.xx.xx.xx dev ethX" )'
    but doing so in arch wont connect to router/gateway.
    Also in rc.conf it says :
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    #   - prefix an entry in ROUTES with a ! to disable it
    How to declare each route, and then how to list it in ROUTES?
    I read the following thread:
    http://bbs.archlinux.org/viewtopic.php?id=52992, but after adding the suggested lines in rc.conf and restarting the network it fails and says hostname not found.
    Thanks.
    Last edited by kapz (2009-10-08 18:53:39)

    In that case, your routing table should look something like this:
    Kernel IP routing table
    Destination Gateway Genmask Flags Metric Ref Use Iface
    192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
    192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
    0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1
    rc.conf:
    eth0="eth0 192.168.1.14 netmask 255.255.255.0 broadcast 192.168.1.255"
    eth1="eth1 192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255"
    INTERFACES=(eth0 eth1)
    # You may need to add 'dev eth1' to the end of this after '.1.1'
    gateway="default gw 192.168.1.1"
    ROUTES=(gateway)
    Last edited by fukawi2 (2009-10-06 21:55:49)

  • How to add KDE applications in KDE_base --SOLVED--

    Hi,
    I installed Archlinux base 0.7.2, xorg, KDE base 3.5
    There is less in KDE base than I thought. ( no filemanger, no tools, no terminal )  In fact it is an empty dektop with a few icons even without applications linked to these icons.
    I installed a few more KDE packages with pacman, but these are
    not added in the KDE menu. How can I fix this ?

    Linteg wrote:
    I guess you didn't log out and log in again after installing KDE? If you do, your $PATH var gets updated, and /opt/kde/bin is added, then you will be able to start the kde apps by just typing their names.
    Thanks Linteg, fixed the PATH this is ok now.
    I have a few "working" icons on my desk now, Konsole, Kwrite, Firefox but I don' t find find how to add these
    applications to the KDE menu.

  • How to ADD reference table and make a field as currency field in dictionary

    pls render some info on how to add refernce table and ref field if i want to make an added field as a currency or quantity field...

    Hi Kiran,
    It sounds like you are creating a "Z" table or structure and have defined a quantity (eg MENGE). But when you run the syntax check, the system is saying you need to define a reference table / field.
    Well when you are in SE11, click on the "Currency / Quantity Fields" tab. You will see 2 columns called "Reference Table" and "Reference Field". These 2 columns define the unit of measure for the currency / qty.
    If you have defined in your table MENGE and MEINS and the MEINS field is the unit of measure for the MENGE field you should define your fields as such (inthe Currency/Quantity Fields" tab:
    Table - ZVBAP
    MENGE MENGE_D QUAN ZVBAP MEINS
    MEINS MEINS   UNIT
    Hope this makes sense.
    Cheers,
    Pat.
    PS. Kindly assign Reward Points to the posts you find helpful.

  • How to Add parameter fields in BI publisher fields

    Hi,
    I'm creating xml report for Apps standard Trial Balance Summary, here i cant able to run the .rdf locally due to SRW.UserExit .
    So i got the XML file from output of the report.
    Then i added the xml data in BI publisher and then i have created the .rtf for that.
    Here i need to add some fields which is not available in fields list (in BI Publisher).
    How to add that fields, or is possible to add fields manually.
    That fields are given as parameters while running the .rdf file.
    Please tell me how to solve this problem.
    Is possible to add fields manually means tell me how to do that.

    If those fields are input parameters to the concurrent program then you can display them in RTF by declaring and printing it as
    <?param@begin:P_CONC_PARAM?>
    and display it as <?$P_CONC_PARAM?> - Note P_CONC_PARAM should match your parameter token

  • How to add the date field in the dso and info cube

    Hi all.
    I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
    Thanks & Regard
    KK

    my prob is solved
    KK

  • How  to add custom fields to the  sap standard  program ukm_bp_display

    How  to add new custom  fields to the  sap standard  program ukm_bp_display .
    could u  please any one help me on this?

    Hello Kumar,
    You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
    Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
    DATA: BEGIN OF gt_grid_alv OCCURS 0.
           partner LIKE but000-partner,
           credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
            INCLUDE STRUCTURE ukm_s_account.
            INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
    DATA:   credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
          Gruppe Vector
            INCLUDE STRUCTURE ukm_s_bp_vector.
          Gruppe OBL = Obligo
          include structure UKM_S_BP_CMS_MALUSDSP_OUT.
            INCLUDE STRUCTURE ukm_s_display_segment.
            INCLUDE STRUCTURE ukm_s_bp_cms.
            INCLUDE STRUCTURE bus000_dat.
    *DATA:   icon(4).
          Gruppe RAST (Raster)
    DATA:
             rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
    DATA:    rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
    "Summe raster 2 bis 6
    DATA:  END OF gt_grid_alv.
    Another way is you can  go  to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
    Hope this will solve yiour problems.
    Regards,
    Antony Thomas

  • How to add Excise item with out chapter id

    Dear all,
    How to add Excise item with out chapter id?
    Chapter id of purchae items will be known only after receiving Invoice/gate pass/delivery  chalan from supplier/vendor
    To send a purchase order we need to create that particular item in the master, but with out assigning chapter id system is  not allowing to save without chapter id.
    How to solve this?
    I am with SAP 8.8 and PL 10
    Thanks in advance
    regards,
    Kumar

    Hi Kumar,
    Refer the book of chapter ID or find out on internet you will get the chapter ID.
    Still if you not able to get  the chapter id then consult with excise advisory.
    But you can add Excise PO until you have the excise details in Item master.
    Regards,
    Datta Kharat

  • How to add internal table fileds in Text module in smart forms

    Hi Friends,
        How to add internal table fileds in Text module in smart forms?
    Thanks & Regards,
    Vallamuthu.M

    Hi Vallamuthu ,
    how did you solve your problem?
    thanks,

Maybe you are looking for