How to add tab and field in purchase order

hi friends,
I have to make changes in the purchase order. i have to add tab and a field in that.
i know that badi ME_GUI_PO_CUST have to used this.
can anyone send me the code or documenation fot add a tab and field using this badi or suggest me how to do this.
if code or documenation is not available then send me the steps if possible.
my mail id is [email protected]
[email protected]
hitesh kumar

Hi,
1. Double-click on your implementation class
2. Click on Attributes tab
3. Add attribute SUBSCREEN1 with level Constant, visibility Public, type MEPO_NAME, initial value 'HDRSCREEN1'.
please go thourhg the below link .... in this the steps are there and the some of the standard Enchancements also there.
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
See this treads :
ME_PROCESS_PO_CUST header n item connection
Re: BADI IF_EX_ME_PROCESS_PO_CUST~PROCESS_SCHEDULE
Reward points
Regards

Similar Messages

Does Anyone know how to add a new partner to purchase order created on VI01/VI02?

Does Anyone know how to add a new partner to purchase order created on VI01/VI02?
Please, anyone knows that?
Regards.
Rafael.

Anyone?

How to make net price field in Purchase Order Uneditable

Hello all,
I am facing a problem. During creation of purchase orders the material price is picked up from the Info Record, but the net price field is editable. Please guide me how through standard SAP can i make this net price field uneditable.
Thanks in Advance,
Ritesh.

Hi Ritesh,
You can goto:
SPRO-MM-Purchasing-Purchase Order-Define Screen Layout at Document Level
from here you select ME21N-Selection group-Quantity and Price.
Make the price and price unit as DISPLAY.
By this it will show only display for price, but you have to take not that there is also condition tab which user can change the price, this price is from INFOREC.
Goto to M/06 select your Condition type, In Manual entries maintain "D"-Not possible to process manually
Regards,
Maia

How to add CIN condition types in Purchase Order Report

Hi,
I'm developing a purchase order report using smart forms. I have add the conditions: BED, ECess, SECess and VAT.
Where from I can get each of the above values.
I was told that I can get break up of CIN Tax through following Link
1.) EKKO-KNUMV <-> KNOV-KNUMV
2.) KNOV-KNUMH <-> KNOP-KNUMH
But in Link No 2 I'm not able to find any values.
Kindly help.
Regards,
Sriram

Hi,
All BED, ECess, SECess and VAT should be calculated manually based on the net value of the purchase order & Company noms. I guess, we cannot get them directly.
Hope it helps!!
Rgds,
Pavan

How to transfer Supplier custom field into Purchase order

Hi ,
We had a custom field called Project code in Supplier data (vendor master) at SRM. As per flow purchase order gets created as a follow-on document. Now the requirement -Project code which was there in supplier data this should be transfered to PO
In my knowledge this can be done through BADI , Could you please explain me steps required to do this?
Thanks in advance.
Harish

Try BBP_DOC_CHANGE_BADI or BBP_ITEM_CHANGE_BADI.

How to add Tabs and List Boxes in Webi Report in Reporting Area(Not Report Filters & Input Controls)

Hi All,
I have a requirement to use some components called List Box and Tabs in my WebI report for presenting the information by dynamic dimension and measure selection using list box and segregate information by using Tabs as in below image.
Image was prepared in MSPaint not executable webi report.
Is it possible to integrate the list box and tabs into Report Zone in BO Webi? as show in below image?
Thanks in Advance
Muralidhar Reddy N

Hello Muralidhar Reddy,
The exact tool for your requirement is SAP BO Dashboard or SAP BO Design studio. WebI is a tool for ad-hoc reporting tool and we have limited functionalities to make dashboards using webI. You can have all those chart options in WebI and you can use Input controls or drill filters for restricting data. But you cannot have these selection components in reporting area. Tabs as shown in above post, you can have in bottom of the report.
find below a good example of dashboard using WebI
http://blog.davidg.com.au/2011/04/webi-as-dashboard.html
hope it helps
Regards,
Nikhil Joy

How to add the date field in the dso and info cube

Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KK

my prob is solved
KK

How to add a customer field or extn coll in the tab1&2&3..of a UDO doc?

Hi Experts,
Does anybody know how to add a customer field or extn collection in the unused tabs like tab1&2...in a UDO document?
Thanks for your reply in advance.
Thanks & Regards,
David

Hi Subhasini - 
It seems you have discovered that adding an extension field to the Project Suppliers collection is not possible; many of the collections in E-Sourcing do not support extensions and, even when they do, typically, the table view of the data cannot be changed to show the extension value (it would only show on a "details" page, for example. 
The solution that you have proposed may work, although I think there is a slight mistake in your logic. I believe you are saying that the script would take data from the newly created extension collection and populate data in the out-of-the-box vendor collection. 
In thinking about your solution, I believe the benefit is that any logic and reporting based on the standard collection continues to function correctly (e.g., creating an RFx from the Project will use the out-of-the-box vendor collection). 
That being said, I generally am reluctant to do a "replace" of a standard collection with an extension collection as you propose. My recommendation is that you challenge the customer on the importance of this requirement. For example, could the code be maintained on the vendor record? Why is it maintained in Projects? If it is maintained in the vendor record, could you just populate a read only collection the Projects that shows the vendor and code? Could a report be written that can be launched from within the Project to show the values? How does the customer intend to use this field? Could the display name of the vendor object be the right place for it? 
I hope these ideas are helpful. 
Regards, 
Rob

How to add a Custom field in the Standard SAP Sales Order main screen

Dear Experts,
We have a requirement of adding a Custom field in the Sales Order screen. I know how to add the Customer field in the Additional data B tab of the Sales Order Header Screen as that is the screen user exit provided by SAP. Can someone tell me how to add the Custom field in the Sales Order main screen. Program Name - SAPMV45A and Screen Number - 4001. What is all I need to take care.
Thanks,
SNK.

I have not added the Custom filed in the main screen and added in the Additional data B screen. So closing the message.

Create additional field in sales order item and copy to purchase order item

Dear SAP Gurus,
I am hoping that someone could help me by providing me with how to implement the following 2 requirements in the SD order and in the purchase order.
1. I am wanting to add a custom field to the SD sales order item copying a value from the vendor customer master.
2. I then want to add a custom field to the purchase order item and copy the value from my custom field in 1. to this new custom field..
Can you please advise how I would go about implementing the above requirements? I am assuming that there are exits to allow me to implement these 2 requirements.
Many thanks
Henry

Hi,
For the first requirement you can use the USEREXIT_MOVE_FIELD_TO_VBAP in report MV45AFZZ.
For the second, as I think that you will create a RFQ you can try to use the enhancement MEREQ001.
Regards,
Eduardo

Addition of custom tab and fields in cProject

Hello Experts,
I need to add custom tab and fields in cProject project definition level(type DPO).
As it is given in IMG help, there are two ways of doing this.
1) Addition of data in CI_DPR_PROJECT and Creating the field groups and including these fields in the field groups.
2) Creating the custom tab and assigning the webDynpro component to it.
I tried the first method. Here I am able to see the field group as the tab in cProjects but the fields included in CI_DPR_PROJECT are not appearing.
Please let me know how I can see the fields which are added to CI include.
Also,
For the second method what is the meaning of implementing the WebDynpro interface DPR_CUST_EXT_INTF ?
I appreciate if anyone explains step by step procedure for this.
Thanks in advance.
Regards
Maddy

hi Madhu,
By creating a custom tab and adding field you can do that.
Pls. follw the steps as below:
1)Enhance Data base table:
Follow the path:
Spro ->Collaboration Project ->Global Enhancement to Project elements ->Enhance Database table
You will get details about Object category, its Entity table and Structure with Customer Include/APPEND Structure
Then go to Se11 and make changes as mentioned below:
Add the fields required on cProjects Screen in table DPR_PROJECT in the Include "CI_DPR_PROJECT"
2)Run Program DPR_CUST_FLDS_IN_FC_MAP and pass structure : DPR_TS_PROJECT_EXTENDED_ATTR
Run Program DPR_CUST_FLDS_IN_FC_MAP in transaction code SE38 and execute it and in Structure w. Customer Include field, pass structure: DPR_TS_PROJECT_EXTENDED_ATTR, this will generate transport request
3)Set up field control.
Copy std. field control and create new.
Path:Spro ->Collaboration Project ->Global Enhancement to Project elements ->Set up field control
4)Create field group
Path: Spro ->Collaboration Project ->Global Enhancement to Project elements ->Set up field control
Define group to your field here for your field control.
5)Define Field groups for Customer Fields
Path: Spro ->Collaboration Project ->Global Enhancement to Project elements -> Define Field groups for Customer Fields
Make entry here. Name of group is Name of tab page in cProjects front end
Define your customer fields for field group
6)Assign field control to your Project Type:
Path : Spro ->Collaboration Project ->Structure ->Define Project type
Assign custom defined field control to the project type in Field contol field at the bottom.
With this seetings you should be able to see your custom defined fields in custom defined tab page.
Regards,
Niraj

How to add a new field in MM01, with say contaminent as a field?

How to add a new field in MM01, with say contaminent as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?

Hai venkateshwar reddy ,
try with these user exits
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Refer these steps also
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717#

How to add an input field in the web UI of CRM 2007

Hi everybody.
I want add an Input field in the Web UI Screen. How it is possible.
I want get the information with detailed descriptions if possible with screen shorts.
What type of methods it will be generated and what are the code we entered in those methods.
Take according to any example. But with detailed description.
I am new for the CRM 2007. So, please give the screen shorts with proper data.
Not only adding the field. If any data i entered in the adding field then that will be stored in the tables otherwise no use by adding the field.
So, Can anybody please send a proper information according to this.
Here another one How to Add our own table (Ztable) field in the Web UI Screen.
How to add the same field in the BOL.
Please expalin about those concepts with full of screen shorts messages.
Thank You.
Regards,
Krishna.

If you want to add extra standard fields (like one you mentioned), you can use Component Workbench and Copy the configuration and create your own configuration and make the "Available Fields" appear there.
If the standrd field is not available, you can Add Context Node using wizard and make it visible.
If its a custom field (a new one); you will have to use EEWB and add the fields and then make it visible in the UI using Component Workbench.
Regards,
Alin

How to add new text field in standard report

how to add new text field in standard report?

Hi,
I presume you are talking about a report display in ALV and u wish to add a column to it .
If it is a global requirement ,as in table being used there in ALV can be modified, then you can append the table and the system should pick up the same automatically from there.
Otherwise , you can make a Z program . Modify the catalog being used in ALV.
Regards,
Shweta

How to add new customise field in standard SAP ME28 Report?

Hi Anybody,
How to add new customise field inside Standard SAP Screen report ME28?.
Anybody, Please tell me how to do?.
Thanks,
Regards,
S.Muthu.

Hi Subramaniyam,
You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field.

How to add tab and field in purchase order

Similar Messages

Maybe you are looking for