How to add texts to the Header Text in the PO header
Hi
In our system, some already added remarks are appearing in the PO header text field when i open a PO. I wanted to edit the remarks appearing in the PO header as a default. I wanted to know where these predefined texts are filled in. Appriciate if you can help me findout the same.
Thanks
Venkat.
Hi
In the above said configuraiton path, they have mentioned "Purchase order" in the source object and the "Header Text" in the source text.
But i wanted to konw where the below mentioned genereic Notes/Remarks will be entered. For all the purchase orders, this text is autmatically get copied into the header text. i wanted to know from where it is originating and where we are maintaining.
"Notes / Remarks :
Vendor's signature on the attached PO terms and conditions is an integral part of this PO
All documents should have a PO number
Invoices should be submitted to the attention of the Finance department
Please attach a PO copy with all claims to avoid delay in receiving payment.?"
Similar Messages
-
How to add internal table fileds in Text module in smart forms
Hi Friends,
How to add internal table fileds in Text module in smart forms?
Thanks & Regards,
Vallamuthu.MHi Vallamuthu ,
how did you solve your problem?
thanks, -
How to add a new column (Project Number) in the action items table under NPD Module?
There are two projects with same name and created by same person in NPD.
So when it is displayed in "Action Items" table, It looks similar.
To avoid this, I need one more column (Project Number) to be added in the "Action Items" table and " Strategic briefs and projects" table.
So, How to add a new column (Project Number) in the "Action Items" table and " Strategic briefs and projects" table under NPD Module?
Please do the needful.There is no out of the box configuration available to add columns to NPD action items. As always we welcome enhancement requests.
Thanks
Kelly -
How to add more than one input arguments to the tpcall
Hi
Can any one know how to add more than one input arguments in the tpcall using WTC (Jatmi)?
Par example, I have un service Tuxedo getConsoClient(char* cli_id, char* type)
To call this service, I'm using tpcall("getConsoClient", dataIn, 0);
here, I did't know how to add two parameters in the TypedBuffer object. I'm new to WTC.
Any hints will be greatly appreaciated.
Advanced thanksThanks for you help. But in java Jatmi, I have lot of problem to convert array into TypedBuffer or TypedString. See below code, I'm tried using vector or tableau etc..
But I have always same erreur. :(
public void getClientInfo() {
Context ctx;
TuxedoConnection myTux;
TypedString numinst = new TypedString("1");
TypedString idClient = new TypedString("1003");
TypedString[] dataIn = {numinst,idClient};
//TypedString dataIn = new TypedString(numinst+"\0"+idClient+"\0");
Vector input = new Vector();
input.add(0,numinst);
input.add(1,idClient);
Reply rpy = null;
try{
System.out.println("getClientInfo called : " + dataIn);
TuxedoConnectionFactory tcf;
ctx = new InitialContext();
tcf = (TuxedoConnectionFactory) ctx.lookup("tuxedo.services.TuxedoConnection");
myTux = tcf.getTuxedoConnection();
System.out.println("About to call tpcall cnx = "+myTux);
rpy = myTux.tpcall("LireInfoCli_SE",(TypedBuffer)dataIn, 0);
System.out.println("tpcall successfull!");
TypedFML32 typ = (TypedFML32) rpy.getReplyBuffer();
System.out.println("Reply Type = "+rpy.getReplyBuffer().getType());
System.out.println("Reply toString = "+typ.toString());
while(typ.Fiterator().hasNext()){
System.out.println("Reply toString = "+typ.Fiterator().next().toString());
myTux.tpterm(); // Closing the association with Tuxedo
}catch (TPReplyException tpx) {
// Could not get the tuxedo object, throw TPENOENT
System.out.println("TPReplyException perrno = " + tpx.gettperrno()+" DETAILS "+tpx.gettperrordetail()+" getLocalizedMessage "+tpx.getLocalizedMessage()+" "+tpx.getCause());
tpx.printStackTrace();
}catch (TPException tpx1) {
// Could not get the tuxedo object, throw TPENOENT
System.out.println("TPReplyException perrno = " + tpx1.gettperrno()+" DETAILS "+tpx1.gettperrordetail()+" getLocalizedMessage "+tpx1.getLocalizedMessage()+" "+tpx1.getCause());
tpx1.printStackTrace();
}catch (NamingException ne) {
// Could not get the tuxedo object, throw TPENOENT
System.out.println("Could not get TuxedoConnectionFactory : " + ne.getMessage());
ne.printStackTrace();
}catch(Exception e){
System.out.println("Exception in getClientInfo ->"+e.getMessage());
e.printStackTrace();
return;
} -
How to add an image or static text in the header of EACH page of a cross-Tab report
Post Author: rtutus
CA Forum: General
Hi, I use Crustal 11.0.
I have a cross Tab. I display the items on the left column and the months horizontally, the items are grouped by category field. The values are the sum of quantities are displayed for each month. Like this:
Items Jan Feb March .....................Total
Category 1
Item11 val11 Val12 Val13 Total values
Item12 val21 Val22 Val23 Total values
Item13 val31 Val32 Val33 Total values
Category 2
Item21 val11 Val12 Val13 Total values
Item22 val21 Val22 Val23 Total values
Item23 val31 Val32 Val33 Total values
Category 3
Item31 val11 Val12 Val13 Total values
Item32 val21 Val22 Val23 Total values
Item33 val31 Val32 Val33 Total values
The problem, I want to add a page header for each page of the report.
When Crystal reports first displays my cross-tab in the designer, CR displays the cross tab in the Report header section. I d like to add text or image for each page and not only at the begining of my Cross-Tab.
If I just add an image or text at the top of the report designer, which is my report header, I get the image or text only on the begining of the 1st page of my report but never in the other following pages.
If I try to work around the problem and move the cross Tab to a group section instead, and then put the Image in the group header, I get what I want, but the problem is that:
The columns header: Jan, February....December are displayed for each group of my report and not only in the beginning of the report. I get something like this:
Items Jan Feb March .....................Total
Category 1
Item11 val11 Val12 Val13 Total values
Item12 val21 Val22 Val23 Total values
Item13 val31 Val32 Val33 Total values
Items Jan Feb March .....................Total
Category 2
Item21 val11 Val12 Val13 Total values
Item22 val21 Val22 Val23 Total values
Item23 val31 Val32 Val33 Total values
Items Jan Feb March .....................Total
Category 3
Item31 val11 Val12 Val13 Total values
Item32 val21 Val22 Val23 Total values
Item33 val31 Val32 Val33 Total values
You see the months get duplicated. Any way, my real need is to add an image or text in the header of EACH page of a cross-Tab report.
Thanks a lot for your help.Hi Divya,
you could do for example in the wdDoInit() of the view
wdContext.currentContextElement().setPicture("picture.gif");
Now you assign this context variable to the Tab using the Tab_header's imageSource-Property. When you click on its value column, you see a button with three dots on it. If you click on this button, you will get all context nodes and attributes for this View. Usable variables are clearly marked, you now choose the one named Picture or what ever name you prefer to use. But it must correspond to the one set in the wdDoInit.
I think setting a picture (not necessarily for the tab-page) is done in one of the excellent tutorials. If you are a newcomer I strongly recommend doing some of the tutorials. I have learned tremendously from them.
Hope this helped
Harald -
Need help on how to add a delimeter into a text file
Actually, this program reads a textfile. After reading, i need to put certain delimeters after certain characters and print them out to a new file.
this is how it works :
for example...
471117-01-5179052004 VENUE SECURITIES SDN. BHD.
This is wat the programs read. Now i have to put a semicolon after this numbers ..
471117-01-5179052004 (;)
then put another semiclon after this words
VENUE SECURITIES SDN. BHD.(;)
But, this text file contains around 2000 lines, and i have to do this for each line...thts y i dunt understand how to code it.thanks mr. micheal dunn. Anyway, how can i put this code to read from a text file.....because i need to read the whole text line and put semicolons. i cant use stringbuffer as it only reads a certain length of string..could u tell me how to do this.
this line is actaully a short line from the text file.
String str = "471117-01-5179052004 VENUE SECURITIES SDN. BHD.";
need to put the semicolon is this line actually :
471117-01-5179052004(;)AVENUE SECURITIES SDN.BHD. (;)000350785A (;)RAHMAN BIN KADIRAN 51, TAMAN MUHIBBAH SUNGAI MATI MUAR 84400(;)JMY(;)SMYSBI (;) 8516 000000030000004600 (;)1581800 ...can u explain wat is tht \\d+-..sorry im a beginner here...hope u can help me out.. -
How to add auto-action video under text
hi all,
does anyone have any experice how to implement any auto-action to a video which is lying under the entire text (as a background)?
I would be happy if someone could explain how to do this.
we´ve released a hardpaper book for children, and we would like to release an interactive version of it with some small nice animations that are running in the background of the entired text.
is this possible anyhow?
thx
dannySo are you saying that you cannot embed the video directly into the main timeline (I don't use CS5) as you could with earlier versions?
Overall I wonder if you are using the wrong tool for the job. Flash is not a video editor and attempts to use it as such often fall short. Adobe After Effects or even a simple video editor may work better:
http://www.adobe.com/products/aftereffects.html
If that is not an option... how about
.... embed video directly into main timeline... or
... convert video file to .swf, then import .swf... extending timeline as needed..... or
... if vid is short, do frame grab for each frame, save as bitmap, import the series of bitmaps, place them on layer below animation... or
but to keep the video synced to the animation, you'll need to set the Flash doc frame rate to exactly the same as the original framerate of the video. For example, if shot in mini-dv format, the frame rate of the video is 29.97 so the Flash doc frame rate would need to be 29.97 also.
Best of luck,
Adninjastrator -
How to add a instruction to a text field
Dear all,
I am trying different ways to add a guideline to a text field. I tried
1/ To insert a comment, but clearly it is not working with an interactive form in Adobe Acrobat,
2/ To use text field and set the guideline as default value on the object palette but the problem are
- The text field is not expanded horizontally even I chose Expand to fit option
- The guideline does not disappear in case user do not use it
- The box does not shrink also as users do not type enough lines
3/ To use text instead of text field for the guideline, the problem is
- There will be a large space between the two parts since the guideline is not supposed to be printed.
My question is whether there is a smarter way to suggest users typing in the text field by giving the instructions without having it printed out. For instance, is there a way to have a hidden box, you know, it appears as users drag a mouse or click the field?
I know this is might be a naive question, but please help me out. I would really appreciate.
EdigoWow there is a lot to cover in this thread......
1. A flowed subform means that the content within that form will be placed from left to right top to bottom. In your case where you want to place objects beside each other they need to be within a positioned subform (this means the objects will maintain their position relative to the subform boundaries). So in your case I would break up the form into logical sections and wrap those sections into a flowed subform (make the subform dimensions span the page) then wrap all of the sections in a Page subform that is flowed. Now when it flows everything the positioned subform containers will span the page and will keep theobjects where they are positioned.
2. Each cell can only house 1 object. You could add another column to add the second course date.
3. You can add as many rows and columns as you need....so yes you could add a course code.
4. The form can access a database for filling the form or for writing to the DB, but there are a few things you shoudl know. Reader does not have this capability and it must be enabled using LiveCycle Reader Extensions. This is a server based product so it is priced as such. If you have a small number of users it might be more cost effective to buy Acrobat for each user. Once that is taken care of the connection to the DB is controlled by an ODBC driver in the Windows OS. This means that each machine that loads the form will need to have this driver configured (cannot be automated) as well this solution will only work on a Windows machine. In bigger installations this becomes a maintenance nightmare for most IT shops. Do you still want to proceed down this path?
5. A form can only create a single data file structure ....I do not understand what you mean by the last point....can you elaborate?
Paul -
I need t add a URL link to a word but have not bee able to locate this option, and the usual CTRL + K isn't working. Thanks!
Hi experts,
I findout that there is no option in the standard text to add a url link and i findout the solution also we can create text module sepreatly ,here we can add a url link and then add in the smartfrom.In this way the user only can edit the text contents of the samrtfrom without seeing ht settings.
Thanks everyone for help. -
How to add an animation to a text field with two lines?
I have a text field with two or more lines. Why isn't it possible now to apply a text animation?
For certain tasks, Titler and its Presets can be very good, and can simplify things greatly.
However, when one gets beyond the limitations of the Titler, I really like to create my Titles in Photoshop, and Import those as Still Images into my Project. I then use the power of Keyframing various Effects over time. This allows me much more control, BUT does require more hand-work. Still, that added control is too important to me, and I sort of like doing the handwork.
For the "alignment" of multiple Titles, to get multiple lines of Text, you can create the first Title, and then chose Duplicate Title. Initially, that will be identical, but you just change it, as is necessary. After you have changed that "second line of Text," place that Duplicate on the next Video Track, above the first Title, and use the Fixed Effect>Motion>Position, to move it down, to where it would be (by the height of the font, plus any desired Leading), if one had created a second line of Text on one Title.
I also like to use Alignment Grids, when things get critical, and create those in Photoshop, with a trasparent background, and just place them, on say Video Track 2, with all of my Titles above that. Just do not forget to remove any Alignment Grids, before you Export/Share the Timeline, or they will be part of the output video.
For more background on Keyframing (so very useful with more than just Titles), Steve Grisetti has done a multi-part tutorial, available as Basic Keyframing on Muvipix.com. I highly recommend it. Keyframing is simple to do, but can be a bit of a tough concept to grasp initially, and it's a subject that is tough to write about - takes longer to type instructions, than to do the work.
Good luck,
Hunt
PS - Do not know if you saw them, but Titler has two Alignment Tools - Align Horizontally, and Align Vertically, that can be helpful to center Text. -
How to add a comment for each row on the output of a report?
I would like to add a comment (field) for each row on the output of report? This comment should to be saved as well. Is there a way i can do that?
Regards,
RamHi Dimitri,
through the instead of trigger functionality i am able to update the view. This is view is based on different views which should be linked to a table (as you suggested) in which comments can be stored. Hower this table is empty and how to link this table with the view now? I face the following challenge.
View consists the following columns, for example
select name, sex, age from test_view
name sex age
John M 20
Anton M 30
Willy M 40
shirley F 38
sharon F 37
The report has the following output, for example
name sex age
John M 20
Anton M 30
Willy M 40
Shirley F 38
Sharon F 37
Now i would like to add comment through a button.
The report layout looks like
name sex age
John M 20 <add comment button>
After submitting the <add comment button> you can enter text which deals with John
text='John doesnot like me'
Finally the report display the comment as well
name sex age
John M 20 'John doesnot like me' <update/delete comment button>
Anton M 30 <add comment button>
Willy M 40 <add comment button>
Shirley F 38 <add comment button>
Sharon F 37 <add comment button>
After submitting the <update/delete button> you can change or delete the entered text.
I hope this example clears things up.
Regards,
Ram -
How to add an icon for ok code at the bottom of the screen.
hi,
I have designed a screen with a table control.
I want to have at the end of the screen a ok and a cancel button.
For example in menu painter on top we have a icon for going back, exit etc.
At the same way at the bottom of the screen i need to have a tick icon. How to add it at the end of the screen.Hi Josephine
Please proceed as below:
1. SE51.
2. Change the layout.
3. Add 2 pushbuttons at your desired location.
4. Double click on each button for Attributes.
5. In the attributes, give the Name, Text.
6. Select the Icon Name from the list: Eg: ICON_OKAY and ICON_CANCEL.
7. Go back to layout.
8. Save & Activate
9. Now you can test the screen to check the icons displayed in the screen.
Hope this helps.
Kind Regards
Eswar -
How to add a New schedule line and update the order quantity?
Hi all,
I have to add a new schedule line in VA01/VA02 so that when ther is partial confirmed quantity against a schedule line, we have to create a new schdule line based on the existing so that it will contain confirmed in one and unconfirmed in the other.
The schedule line will split once the user go to Header data screen in VA01/VA02. So I used USEREXIT_MOVE_FIELD_TO_VBAK user exits in MV45AFZZ include program.
I splited the order quantity against the confirmed quantity and added it as new schedule line in the XVBEP internal table and update UPDKZ flags for XVBEP & YVBEP.
Could anyone tell me is there any other way to do this without updating XVBEP? Because it is affecting some other place because of index table is not updating. How to you think use if update xvbap-etenr_high and update index table IVBEP1 for new line insert into XVBEP instead directly inseritng it into?
My code as follows:
xvbep-WMENG = t_temp-WMENG .
modify xvbep TRANSPORTING WMENG.
t_temp1- ETENR = '0002'.
if SY-SUBRC <> 0.
t_temp1-UPDKZ = UPDKZ_NEW.
modify xvbep TRANSPORTING WMENG UPDKZ.
endif.
With Regards
RajHave you got thru this one if so please provide me with the solution as i got the same req' ..
-
How to add exactly 2 NON XML caracters at the end of a SOAP body
Hello all I am trying to add two (and only two) extra non xml caracters "AA" at the END of a SOAP body using the JAXWS handlers as so:
HTTP/1.1 200 OK
Content-Type: text/xml;charset=UTF-8
Content-Length: 131
Content-Length: 131
Server: Jetty(7.x.y-SNAPSHOT)
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Body></SOAP-ENV:Body></SOAP-ENV:Envelope>
AA
The problem is that if you try to add them to the SOAP body (see code below) you get a XML Unmarshalling exception. If I add "AA" as a soap attachment I get MORE than 2 caracters after the SOAP body (which I don't want)
Here is the my SOAPHandler code :
@Override
public boolean handleMessage(SOAPMessageContext mc) {
if (Boolean.TRUE.equals(mc.get(MessageContext.MESSAGE_OUTBOUND_PROPERTY))) {
try {
SOAPMessage message = context.getMessage()
String stringSoapMessage= getMsgAsString(message);
stringSoapMessage += "ss";
message.getSOAPPart().setContent((Source) new StreamSource(new ByteArrayInputStream(msg.getBytes())));
message.saveChanges();
context.setMessage(message);
} catch (Exception e1) {
return true;
public String getMsgAsString(SOAPMessage message) throws SOAPException {
String msg = null;
try {
ByteArrayOutputStream baos = new ByteArrayOutputStream();
message.writeTo(baos);
msg = baos.toString();
} catch (Exception e) {
e.printStackTrace();
return msg;
so my question is this: is there any way to add exactly 2 non xml caracters at the end of the soap body using jaxws handlers ? I have spent several weeks on this so it is not an easy question...
Thanks,
Fred.Yes I have done it using CFX interceptors. But the runtime dependencies needed were too big for this particular use. I mean having to use these:
apache/cxf/cxf-bundle/2.6.0/cxf-bundle-2.6.0.jar
org/apache/neethi/neethi/3.0.2/neethi-3.0.2.jar
wsdl4j/wsdl4j/1.6.2/wsdl4j-1.6.2.jar
/org/codehaus/woodstox/wstx-asl/3.2.4/wstx-asl-3.2.4.jar
org/apache/ws/xmlschema/xmlschema-core/2.0.2/xmlschema-core-2.0.2.jar
org/mortbay/jetty/jetty-util/6.0.2/jetty-util-6.0.2.jar
org/eclipse/jetty/jetty-util/7.5.4.v20111024/jetty-util-7.5.4.v20111024.jar
org/apache/geronimo/specs/geronimo-servlet_2.5_spec/1.1.2/geronimo-servlet_2.5_spec-1.1.2.jar
org/apache/geronimo/specs/geronimo-javamail_1.4_spec/1.7.1/geronimo-javamail_1.4_spec-1.7.1.jar
org/apache/geronimo/specs/geronimo-servlet_3.0_spec/1.0/geronimo-servlet_3.0_spec-1.0.jar
org/eclipse/jetty/jetty-http/7.5.4.v20111024/jetty-http-7.5.4.v20111024.jar
org/eclipse/jetty/jetty-server/7.5.4.v20111024/jetty-server-7.5.4.v20111024.jar
org/eclipse/jetty/jetty-io/7.5.4.v20111024/jetty-io-7.5.4.v20111024.jar
org/eclipse/jetty/jetty-continuation/7.5.4.v20111024/jetty-continuation-7.5.4.v20111024.jar
to add two caracters at the end of a soap message seems like over kill. If this is the only way to do this then i'll do it this way but it just seems like the implementation of the JAXWS API in JDK 6 seems inches away from being able to do this no ?
Thanks for the replies,
Fred -
How to add 16 bit message sequential number to the byte array
hi
iam trying to implement socket programming over UDP. Iam writing for the server side now.I need to send an image file from server to a client via a gateway so basically ive to do hand-shaking with the gateway first and then ive to send image data in a sequence of small messages with a payload of 1 KB.The data message should also include a header of 16 bit sequential number and a bit to indicate end of file.
Iam able to complete registration process(Iam not sure yet).I dnt know how to include sequential number and a bit to indicate end of file.
I would like to have your valuable ideas about how to proceed further
package udp;
import java.io.*;
import java.net.*;
import java.util.*;
public class Sender {
protected BufferedReader in = null;
protected FileInputStream image=null;
protected static boolean end_of_file=true;
/** pass arguments hostname,port,filename
* @param args
* @throws IOException
public static void main(String[] args) throws IOException{
DatagramSocket socket = new DatagramSocket(Integer.parseInt(args[1]));
boolean more_messages = true;
String str1=null;
* gateway registration
try{
//send string to emulator
String str="%%%GatewayRegistration SENDER test delay 10 drop 0 dupl 0 bandwidth 1000000";
byte[] buff=str.getBytes();
InetAddress emulator_address = InetAddress.getByName(args[0]);
DatagramPacket packet = new DatagramPacket(buff, buff.length,emulator_address,Integer.parseInt(args[0]));
socket.send(packet);
// figure out response
byte[] buf = new byte[1024];
DatagramPacket recpack=new DatagramPacket(buf,buf.length);
socket.receive(recpack);
// socket.setSoTimeout(10000);
String str2=str1.valueOf(new String(recpack.getData()));
if(socket.equals(null))
System.out.println("no acknowledgement from the emulator");
socket.close();
else if(str2=="%%%GatewayConfirmation")
// String str1=null;
System.out.println("rec message"+str2);
else
System.out.println("not a valid message from emulator");
socket.close();
catch (IOException e) {
e.printStackTrace();
end_of_file = false;
/**create a packet with a payload of 1 KB and header of 16 bit sequential number and a bit to indicate end of file
while(end_of_file!=false)
String ack="y";
String seqnum=
File file = new File(args[2]);
InputStream is = new FileInputStream(file);
socket.close();
private byte[] byteArray(InputStream in) throws IOException {
byte[] readBytes = new byte[1024]; // make a byte array with a length equal to the number of bytes in the stream
try{
in.read(readBytes); // dump all the bytes in the stream into the array
catch(IOException e)
e.printStackTrace();
return readBytes;
HI Rolf.k.
Thank you for the small program it was helpfull.
You got right about that proberly there will be conflict with some spurios data, I can already detect that when writing the data to a spreadsheet file.
I writes the data in such a way, that in each line there will be a date, a timestamp, a tab and a timestamp at the end. That means two columns.
When i set given samplerate up, that controls the rate of the data outflow from the device, (1,56 Hz - 200 Hz), the data file that i write to , looks unorderet.
i get more than one timestamp and severel datavalues in every line and so on down the spreadsheet file.
Now the question is: Could it be that the function that writes the data to the file, can't handle the speed of the dataflow in such a way that the time stamp cant follow with the data flowspeed. so i'm trying to set the timestamp to be with fractions of the seconds by adding the unit (<digit>) in the timestamp icon but its not working. Meaby when i take the fractions off a second within the timestamp i can get every timestamp with its right data value. Am i in deeb water or what do You mean!??
AAttached Pics part of program and a logfile over data written to file
regards
Zamzam
HFZ
Attachments:
DataFlowWR.JPG 159 KB
Datalogfile.JPG 386 KB -
How to add multiple images to a JLabel from the jar file
I want to add multiple images in a JLabel but the icon property only allows me to add one. I thought I could use html rendering to add the images I need by using the <img> tab, but I need to use a URL that points to the image.
How do I point to an image inside the jar file? If I can't, is there another way to show multiple images in a JLabel from the jar file?Thanks, it works perfectly. It's a really smart way of fixing the problem too :)
I also found your toggle button icon classes which is something I've also had a problem with.
Thanks.
Maybe you are looking for
-
Audio Space Still Being Used even though Match is turned on
My iphone is showing 20.9 GB of audio data even though iTunes Match is turned on. There is no way to adjust what music is on my phone in the music tab in iTunes. My understanding is that my music will now be stored in the cloud and not on my phone.
-
We had a problem where we started Weblogic 8.1, while receiving internet traffic(we did not know the web server was still accepting requests at the time). When the server started, it ran for a few minutes and then locked up completely(did not shutdow
-
Sqlcesa35.dll - 500 internal system error
Hi, I am looking after a windows cloud server hosting a single web application. It has been set up and installed by a third party, I am having to do the day to day maintenance. It uses the Microsoft SQL Server Compact Server Agent for one of the task
-
Hello, The AEM server must be started in debug mode to use the Eclipse plugin. The command for that is: java -jar aem-author-4502.jar -debug 10123 You can install the Eclipse plugin by downloading the Luna Version of Eclipse and clicking Help > Insta
-
HELP, I HAVE LOST A HARD DRIVE WHICH CONTAIN MY MUSIC. ALL MOST ALL WAS ON MY IPOD AND PLAYS FINE. NOW I AM SCARED TO PLUG MY IPOD IN BECAUSE IF IT TRIES TO SYNC, I MAY LOSE ALL MY MUSIC. ANY IDEAS OR I AM SCREWED?? MUSIC WAS NOT PUT ON IPOD AS A BAC