How to add these modules?

Hi everyone, how can i add these modules listed below? I tried to query them but can't find them. Are they part of another module or what?
•     General Ledger
•     Accounts Payable
•     Fixed Assets
•     Payments & Collections
•     Accounts Receivable
•     Cash & Expense Management
•     Project Costing
•     Project Billing
•     Purchasing
•     Self-Service Procurement
•     Sourcing
•     Procurement Contracts
•     Supplier Portal
•     Inventory Management
•     Reporting
•     HR
•     Cost Management
•     Product Master Data Management
•     Order Management
If someone can help me figure out how to get these added I would really appreciate it.
Thanks!

Hussein Sawwan wrote:
Please post the details of the application release, database version and OS.
Hi everyone, how can i add these modules listed below? I tried to query them but can't find them. Are they part of another module or what?Where do you want to add them?
You can check if those modules are licensed from OAM -- http://docs.oracle.com/cd/E18727_01/doc.121/e12894/T202991T469980.htm#zzbegin
If you want to add the responsibilities, navigate to System Administrator > Security > User > Define, query your username and assign the responsibilities.
Thanks,
HusseinI'm sorry, I didn't word my post correctly. I'm running 12.1.1, db 11gR2 11.2.0.2 on OEL 5.7. I installed with Vision Demo Database
What I meant to ask is how do I add those responsibilities to a user. When i query the names listed above. I can't find a match for most of them.

Similar Messages

How to add these system in the system ID list?

Hello:
    Now I have a another problem in Setting Up Central Auto-Reaction Methods.I have created in solution manager, In the system ID list,I want to have development system ,production system,and other system,because I want to alert these system,but I don't know how to add these system in the system ID list?Dose it need RFC?
    Please someone tell me.
     lexian
     Thanks a lot!

Lexian,
You need to some of these things for the SAP systems to show up in Solution Manager
1. Install the Monitoring Agents (SAPCCM4X for ABAP instance and SAPCCMSR for J2EE instance etc)
2. Configure RFCs from Solution Manager to the Satellite (SAP) systems.
3. Create CSMREG user.
4. Create Monitoring jobs.
These are just some of the things that you will have to do. Refer this link on how to do this
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7da1505211d189550000e829fbbd/frameset.htm.
This is for the broader view of the entire thing
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7da1505211d189550000e829fbbd/frameset.htm
I would suggest starting with the second link.
Let us know if you have any questions
Kunal

How to Add function modules to retrieve current month

how to Add function modules to retrieve current month from TVARV variables (currently we have functions to do close month).

Hi
Double click on the CODE for the line..
SET PF-STATUS 'XYZ'.
It will open the Menu Painter (SE41). Click on the Function Keys Tree Node and And assign the
Function Keys and Function codes for the Menu Items.
Hope this would help you.
Murthy

How to add a module in application

Hi All,
I want to add a new module in application. In Database it is OK. But in application i upload the new module in prodappl folder. But how to set his TOP Plse suggest.
Many Thanks
Ghanshyam

Hello,
What is the database and applications versions?
Additionally please see the following threads;
https://metalink.oracle.com/metalink/plsql/f?p=200:27:4314145935944948375::::p27_id,p27_show_header,p27_show_help:199619.995,1,1
Oracle Metalink: How to add a new module to existing 11i installation. Doc I.D. 199619.995.
https://metalink.oracle.com/metalink/plsql/f?p=200:27:4314145935944948375::::p27_id,p27_show_header,p27_show_help:230513.995,1,1
Oracle Metalink: install 11i all modules? Doc I.D. 230513.995.
https://metalink.oracle.com/metalink/plsql/f?p=200:27:4314145935944948375::::p27_id,p27_show_header,p27_show_help:645423.995,1,1
Oracle Metalink: how to install only needed products? Doc I.D. 645423.995.
Adith

How to Add additional Module to SAP NETWEAVER TRIAL

Hi! Everyone,
I'm completely new to SAP, I was able to install the above subject with its GUI and working perferctly fine, however is it possible to add additional modules such as Logistics, Procurement and sales? Thanks in Advance

Hello Albert,
If it's a trial Netweaver, maybe it's not possible.
Generally you use SPAM or SAINT tcodes to add more packages.
Maybe SAP NetWeaver Administrator will be able to help you.
Jude

How to add these symbols to Photoshop

Hi there,
I am trying to add some texts to my picture in photoshop and I would like to add symbols like the ones I attached here.
Does anyone know where to find and how to add them?
thanks,
Rose110ca

You need to ues the text tool from the toolbox. Simply click it and put it on a location you would like to create a text layer. Once created you can use the selection tool to move it around.
Vancouver wedding photography <a href="http://www.vividdreams.ca">vancouver wedding photography</a>

How to add Z module after realtionship creation in pp01 ?

Hello I am using pp01 transaction for relatationship management. And I need to put some my own code when the relationship was created. Do you any way how to do that ? Is it possible ?
Thank You.

Hi Kernel
You can use the method BEFORE_UPDATE which is available in the BADI HRBAS00INFTY. This gets triggered when you save the record.
Regards
Bala

Your suggestions please on how to add these

Hi there.
CS3, PHP & mySQL.
Busy finishing a site for real estate agent and now running
out of
ideas.
When adding records, I currently have radio buttons for
things like:
swimming pool, jacuzi, irrigation, fireplace, ect.
If the house has a swimming pool, click the radio button. If
it does
not, don't tick the radio button. At the moment every radio
button has
it's own name and value (swimmingpool).
Problem:
When submitting, errors telling me that the un-ticked columns
cannot be
NULL.
Now, also what I want to accomblish, is this:
On the details page, I want the words of the buttons that
have been
ticked, must be displayed as part of an un-numbered list
(Bullets). When
there is a swmming pool (and all the other extras that are
available),
it must be displayed as:
* Swimming Pool
* Jacuzzi
* Fire place
When there is no Fire Place, the bullet with the word (* Fire
place)
must not be displayed.
I will really welcome any suggestions on how to accomplish
this. I don't
want to have a list of 10 extras saying:
* Swimming Pool: Yes
* Jacuzzi: No
* Fire place: No
You can have a look here under "Other Features" in the middle
of the
page.
Thanx for your ideas and suggestions.
Regards,
Deon

On 01 Mar 2009 in macromedia.dreamweaver, Deon H wrote:
> Hi there.
>
> CS3, PHP & mySQL.
>
> Busy finishing a site for real estate agent and now
running out of
> ideas.
>
> When adding records, I currently have radio buttons for
things like:
> swimming pool, jacuzi, irrigation, fireplace, ect.
>
> If the house has a swimming pool, click the radio
button. If it does
> not, don't tick the radio button. At the moment every
radio button
> has it's own name and value (swimmingpool).
>
> Problem:
> When submitting, errors telling me that the un-ticked
columns cannot
> be NULL.
Radio buttons are to be used for situations where you can
select one and
only one alternative. So if you want to use radio buttons,
you'll want
to use something like:
Fireplace 0 yes 0 no
and set no as the default value. Otherwise, use checkboxes.
> Now, also what I want to accomblish, is this:
> On the details page, I want the words of the buttons
that have been
> ticked, must be displayed as part of an un-numbered list
(Bullets).
> When there is a swmming pool (and all the other extras
that are
> available), it must be displayed as:
> * Swimming Pool
> * Jacuzzi
> * Fire place
<ul>
<?php if ($row_Recordset1['fireplaceValue'] == 'yes') {
echo "<li>Fireplace</li>\n"; } ?>
</ul>
This will need some tweaking for the case where there are no
extras
(although an empty <ul></ul> doesn't display
anything...).
> When there is no Fire Place, the bullet with the word (*
Fire place)
> must not be displayed.
>
> I will really welcome any suggestions on how to
accomplish this. I
> don't want to have a list of 10 extras saying:
> * Swimming Pool: Yes
> * Jacuzzi: No
> * Fire place: No
>
> You can have a look here under "Other Features" in the
middle of the
> page.
URI?
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/contact.php

[Solved] How to add missing module?

I have just installed a second build of Arch on my laptop (first: Arch686, second: Arch64). Once through the installation process I rebooted but upon startup it tells me missing bcm43xx module. The module was available during installation but did not get installed with my install. Not sure what I missed out during installation process... Anyway, is there a way to install the missing module without having to go through the install process again and where would I get it from?
BTW: 'modprobe -l | grep bc' does not list the module, hence I am sure its missing/not installed.
Last edited by schimpfj (2008-08-23 09:22:06)

Ooops. I have used an old parameter from my current installtion - although I do not use it (!bcm43xx). My mistake. b43 is loaded. Strange I still cannot see wlan0 when I do 'ifconfig', but should be able to sort this.
Thanks for your kind reminder!

How to learn MM module basics and SD module

Hi all,
As abapers you all need some basic knowledge of the modules, for example I need the info of the modules MM and SD, because I generally get works from these two module and I do not know much on them...
How to learn these modules basics without having to any course?
Could you please provide me documents if possible; my email is : [email protected]
Thank you very much

Hi Deniz,
Process Summaries
Create Sales Order
1.     Use Transaction Code VA01
2.     Identify Sales Office
3.     Enter Sold-to-party (customer) and purchase order number and date if applicable
4.     Enter material, quantity and rate
5.     Credit income to account (Internal Order or WBS element)
6.     Enter partner (University contact details)
7.     Save Sales Order
Create Billing Document
1.     Directly after saving the Sales Order, follow the path Sales document> Billing.
2.     Save the billing document
Other than as a follow-on function
1.     Use Transaction Code VF01
2.     The sales order number will default in check that it is correct
3.     Save the Billing document
Print a Billing document immediately
1.     Use transaction code VF03
2.     Enter the Billing Document number.
3.     Follow path Issue Output to > Printer
4.     Click on execute twice
5.     To preview, follow the path Issue Output to > Screen and click on execute twice to view
Document Flow
1.     Use transaction code VA03 (Sales Order/Credit Memo or VF03 (Billing document) or
2.     Follow the path Environment > Document Flow
3.     Enter the document number
4.     Click on the document overview icon
Common Transaction Codes
Access to transactions is limited by your security profile
For easier access, add transactions to your favourites folders
Create Sales Order     VA01
Create Credit Memo     VA01
Change Sales Order     VA02
Display Sales Order     VA03
List Sales Order     VA05
Create Billing Doc     VF01
Display Billing Doc     VF03
Cancel Billing Doc     VF11
Print Billing Doc     VF03
Display Customer     XD03
Display Material     MM03
Display Customer Line Items          FBL5
Document Structure
Numbering Range
80000000 89999999 Sales Orders
90000000 99999999 Billing Document
60000000 69999999 Credit Notes
800000 899999 Customers
2000000 - 2999999 Materials
for any further info check this link
http://www.leeds.ac.uk/iss/infosystems
Hope this helps u..
Reward points if useful..
Regards,
Sreenivas

How to add selected values from table(selected using checkbox)to table?

Hi All,
i have created simple page with search panel with table in table i have created one column as check box for selecting.
here what my requirement is i need to do search multiple times to add some roles to from some different categories.here whenever i searched i ll get some roles into table there i ll select some role and i ll click add buttion. whenever i click add i need to add those roles into some other table finally i ll submit added roles.
here i followed one link http://www.oracle.com/technetwork/developer-tools/adf/learnmore/99-checkbox-for-delete-in-table-1539659.pdf
i used same code and able to see selected row in console, as object array how to add these into table.
please help me out
Thanks in advance
siva shankar

Thank you for a quick reply
i used the same thing before i go for table check box concept.here what i observed is when i search i am getting some results i am able to shuttle.but if i search again the shuttle is refreshing with new values even not available list its refreshing selected list. IF dont want refresh selected ones.
my usecase after make some searches I will select some roles from different categories at finally i ll submit.
i hope you understand me requirement. please suggest me is this requirement is possible in shuttle component? if yes please guide me.
thanks
Siva Sankar

How to ADD Materialized Views to Refresh Group

Hi,
My requirement is, i want to refresh MVs(fast refresh only) by using DBMS_SCHEDULER. For this i have created one DBMS_SCHEDULER job like below.
BEGIN
DBMS_SCHEDULER.CREATE_JOB (
JOB_NAME      => 'REFRESH_MV_UPLOAD',
JOB_TYPE           => 'PLSQL_BLOCK',
JOB_ACTION      => 'DBMS_REFRESH.REFRESH('MV_UPLOAD_GRP');',
REPEAT_INTERVAL      => 'FREQ=MINUTELY; INTERVAL=30',
ENABLED      => TRUE
END;
In the above script, i created one refresh group 'MV_UPLOAD_GRP'. So what my requirement is i want to ADD my MVs refresh scripts to this group. Scripts as below...
Refresh MV Scripts:
1) Exec dbms_mview.refresh('emp.entity', 'f');
2) Exec dbms_mview.refresh('emp.identifier', 'f');
3) Exec dbms_mview.refresh('emp.rating_hist', 'f');
. so on.
Can anyboy help me how to add these scripts to refresh group 'MV_UPLOAD_GRP'.
Regards
Raj

ALL_REFRESH and ALL_REFRESH_CHILDREN
http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarsnapviews.htm#REPMA027
Nicolas.

PO Print Form how to add text.

Hello,
We have requirement .
Business wants to send Subcontractor, the instructions of assembly through Text . They wanted to add these texts in PO form it self. The Instruction size may be 2- 3 page.How to add these texts in PO form.
advantage is No need to enter the Manual text in PO and disadvantage is PO print may be too long.
Shall we add the text in Material Master and While creation of PO system will copy the text in to PO... Is it Material Master is eligible to take 2-3 page of texts in Purchasing view.
if yes how to add these instructions in PO form. is their any new idea. therefore Business need to ensure the text is printed properly in a clear manner.
Thanks and Regards
sapman man

Hi,
No need of maintaining any text in material master you can directly call text in the form...
we require this text will only for subcontract PO. not for Std PO
You have to build validation in the form program, Kindly discuss ABAPer on building validation and calling standard text in the program..
Kuber

How to add fields in fp03 Extenal Collection agency screen

Hi All,
As per our requirement, I need to add a check box and a date field in FP03 transaction - Extenal collection agency screen. I couldn't find any screen exit,BADI. Any one know how to add these two fields on the screen and save the values in DFKKCOLL and DFKKCOLLH table.
Your answer is highly appreciated.

Hello,
I do not know the either user exit or BAdi for FP03. However I can suggest you a work around.
You can add an addl tabstrip in FPE2/FPE2M. This is possible by adding an addl field say 'ZZ' in tables DFKKOP/DFKKCOLL/DFKKCOLLH.
<also pls look into OSS Note 851023>
So when ever an item is submitted to collection agency, this field should be updated.
Hope this helps
Rgds
Rajendra

REG: How to add new fields to existing Infospoke

Hi All,
We have an existing Infospoke, It has ODS as a Source and some fields are being pulled.
But here is the scenario....
I need some extra fields that are available in other ODS. How to add that fields ?
By some research came to know that.. I need to lookup on the ODS and populate into existing Infospoke.How to add these fields to InfoSpoke using BAdi implementaion.
Note: already BAdi is active in the infospoke.
Please help me in this regard

Hi Chase,
As you mentioned that BADI is already implemented then I guess you should be able to extend the existing BADI itself.
For doing lookup first you should know the key fields of source DSO then by using the existing field of Infospoke you will have to read data from DSO.
DATA: it_data type standard table of 'DSO Name'.
select Key1 key2 etc...
          Field1 Field2 Field3 Field4
          from DSO
          into table it_data
          for all entries of infospoke
         where key1 = infospoke1-key1
                     key2 = infospoke2-key2.
This will give you all the required records from source DSO into internal table it_data. Now you using this table you can populate the original table of Infospoke.
Regards,
Durgesh.

How to add these modules?

Similar Messages

Maybe you are looking for