How to add variables in SOAP header before to call my Physical Service?
In ODSI,
I created a Physical Service for an external WebService (third part).
In a logical Service (inside a XQuery Extension Function) i am calling the previous Physical Service. However, I need to add some variables in the SOAP Header Request before to call that Physical Service.
Thanks
Since your webservice accepts a SOAP Header, the wsdl for your webservice should describe that SOAP header (as well as the body). And when ODSI creates the physical data service from the wsdl, the read function will take two arguments - one is the SOAP header and the other is the SOAP body. All you need to do is populate the soap header and body.
If your wsdl does not describe the soap header - fix it so that it does. If need be, make a copy of the wsdl, modify it to describe the soap header, save it in your DataSpace, and then (re)create the physical data service from the wsdl.
- Mike
Similar Messages
-
How to add new custom SOAP header when generate webservice?
Hi
When invoke an external webservice, SOA Gateway provide a method to add new customized SOAP Header, via extending seeded java function "WebServiceInvokerSubscription".
And in case of generating a new webservice in EBS, is there some similar method to add new customized SOAP header in the webservice?
Thanks
JamesLook at your Payment Process Profile. THere should be a reporting subtab and within that subtab is a Separate Remittance Advice region. I believe that is where you specify the format for the remittance advice document (which is built in XML Publisher). Take a look at that.
John Dickey -
How to add a image to header of exporting pdf in devexpress gridview
hi guys ;
how to add a image to header of exporting pdf in devexpress gridview contentHi Aly14,
I am not sure what the type of your project was, is it a C# project or an asp.net project?
If would be helpful if you could share us more information about your issue.
In addition, I made a research about your issue and I think the links below might be useful to you:
# ASPxGridView insert an image for Header and Footer sections for pdf export
https://www.devexpress.com/Support/Center/Question/Details/Q37155
# Adding an "Export Header" to PDF export in MvcGridView
https://www.devexpress.com/Support/Center/Question/Details/T141918
Best Regards,
Edward
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
How to add color only in header
how to add color only in header and arrange a background color selected from desktop
You can place rectangle in header section on master page which would be applied on sub pages and then fill rectangle with color.
If you are after a specific color then simply use color code and fill.
Thanks,
Sanjit -
How to add variables to navigational block?
Hi,
How to add variables to navigtional block.
I have placed navigational block but I am not finding option to add variables to navigational block.Can any one help me out.In earlier version when I selecte the navigtaional block and add some characterstic to that navigational block then those characterstic are avaialble for the navigation purpose.But in this version I could add navigation pane .But I am not finding any option to add the characterstics.
But when I execute the WAD I am getting fallowing error.
In the Web Application Designer, create a data provider with the name %NM% in template ZMARKTING_PERFOM_GROUP, or change the reference to the data provider in Web item NAVIGATION_PANE_ITEM_1
Please help me. -
Add SOAP header before the WebService request (Windows Forms)
I have to add this header before my Request:
<h:FordDealerIdentity xmlns:h="urn:ford/star/security/v1.0" xmlns="urn:ford/star/security/v1.0">
<soapenv:Header>
<SiteCode>SZBRA</SiteCode>
</soapenv:Header>
</h:FordDealerIdentity>
My request:
var srv = new ConsumerServiceScheduleV1();
var a = new RetrieveScheduleRequestType();
var b = new DealerType();
var c = new ScheduleType();
srv.Credentials = new System.Net.NetworkCredential("","SZBRA05168");
//ScheduleType[] ret;
b.Code = 05168;
b.Name = "BraconCampos";
a.Dealer = b;
a.SchedulingFrom = new DateTime(10/10/2014);
a.SchedulingTo = new DateTime(15/10/2015);
c.SchedulingCategory = SchedulingCategoryType.Regular;
srv.ClientCertificates.Add(new System.Security.Cryptography.X509Certificates.X509Certificate2(@"E:\Agenda Ford\Certificados Agend@Ford\BracomCampos.pfx", "qaz123"));
textBox1.Text = srv.RetrieveSchedule(a).ToString();Is Windows Forms! :)
And what forum deals with SOAP and Web services more than any other forum? Many types of client based applications such as Windows form, WPF, Sliverlight, Windows service classlib project like a BLL and so forth deal sith SOAP and WEB.
How is what you are talking about a Windows forms issue?
My Application is Windows Forms. I need to know how to insert this header before request. -
How to convert the Variable with soap header to non soap variable.
I am working on a customized flow simialr to ProcessSalesorderFulfillmentJMSCOnsumer and Requestor ABCS. I dont have the PIP codes for the Requestor adn JMS Consumer. i built my own Requester ABCS and JMS Consumer. When i am trying to send message from JMS Consumer to Requestor ABCS in a variable with a SOAP:Env and SOAP:body inside.
Becoz of this i was not able to put a condition in my bpel flows. If i put a condtion on this variable like switch inputvariable:part:OrderType='NEW' and it was failing with selection failure. I tried copying the variable to a new variable and then to check the condition still it does not work for me. How do i convert the SOAP Message Variable to Non SOAP Message Variable.
Can i know the message put by SIebel in JMS Queue was it SOAP converted adn then how they are going to handle in Process Sales order Requestor ABCS.HI,
In JMS Consumer of order to cash pip, Instead of using a schema reference they use a Envolpe.zxsd file which will take care of conversion adn then other artibutes are mapped in a transformation file.
Please take an export of jms consumer in jdeveloper and reverse engineer the code of JMS COnsumer Service.
Envelope_To_ListOfSWIOrderIO is the xsl whcih converts the message in AIA Queue to a message in a SOAP. Please look into the transformation.
Thanks,
Venugopal sss Raja -
Add field inside SOAP header PI 7.1
Hello,
by proyect needs we need to add into SOAP header some dynamic information
(Web Services calls to target systems from PI 7.1). This information is
needed in target application for validating permissions of the web
services calls.
The tags are
<soap:Header>
<CarHeader xmlns="http://xxxxx.xxxxxxxx.xxx.org/">
<TicketCar>xxxxxxxxxxxxxxxxxxxxxx......</TicketCar>
</CarHeader>
</soap:Header>
TicketCar's value (xxxxxx....) will be different in each call.
We think that this is not possible with standar or Axis PI SOAP receiverchannel and a solution could be making a Abap mapping for composing the
SOAP call with this tags and values, and in the comunication channel
check the parameter "Do not use SOAP Envelope".
It's rigth? Is there any other solution for doing it?
An example of a call will be:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Header>
<CarHeader xmlns="http://xxxxx.xxxxxxxx.xxx.org/">
<TicketCar>C4A8A61D86C56DC27......</TicketCar>
</CarHeader>
</soap:Header>
<soap:Body>
<E000xx xmlns="http://xxxxx.xxxxxxxx.xxx.org/">
<_request>
<NumeroExpedienteAdministrativo>xxx</NumeroExpedienteAdministrativo>
<CodigoDocumentoInterno>xxx</CodigoDocumentoInterno>
<Status>xx</Status>
<NumeroExpedienteContable>xxx</NumeroExpedienteContable>
</_request>
</E000xx>
</soap:Body>
</soap:Envelope>
Any idea will be welcome
Edited by: Ramon Coma Alcantara on Feb 2, 2010 4:15 PMHi Ramon,
The axis adapter comes with a convenient header insertion handler where you can insert an arbitrary header using a template.
For example, you can define a template like this in the module configuration.
<x:header xmlns:x="urn:x"><me>i say </me><you>you say </you></x:header>
where , , ... are variable place holders.
and you associate these variables with any context value available in the message.
For example, when you pass Hello and Bye for these variables, you soap message will get the header:
<x:header xmlns:x="urn:x"><me>i say Hello</me><you>you say Bye</you></x:header>
You can look at the examples described in Note 1039369 Axis Adapter FAQ.
As I said before, the mileage you can go with the do-not-use-envelope mode is very limited. But if you are happy with it, why not.
Best regards, Yza -
How to use XHeaderName1 in SOAP header
I have a scenario in which im passing the target URL of a webservice dynamically in my mapping udf.
I have to pass the URL to the TServerLocation parameter in SOAP header. But the error i get is that the URL is too long for TServerLocation. So i have to split it and send it using XHeaderName1,XHeaderName2 and XHeaderName3.
Can anyone tell me how to do this.
i saw this blog which gives me some idea but still my scenario is not working
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
please HelpHi Sivasakthi Danasekaran,
URL is an environment variable I think it will take 256 charecters only. You need to split it compulsorly.
Reward points if needful.
Thanks,
RamuV -
How to set wsse:security SOAP header in soa 11g?
Hi,
we are facing an issue with invoking a secured webservice.
we tried 3 things
1.) set the username/password in em under reference properties
2.) Created a schema, set the username/password and included it in partner link header tab.
3.) added a client token policy in em and then set http authentication field.
all these not working.
the error we are facing is :
Non Recoverable System Fault :
javax.xml.ws.soap.SOAPFaultException: Missing <wsse:Security> in SOAP Header
complete payload is below:
<bpelFault>
<faultType>0</faultType>
<remoteFault>
<part name="summary">
<summary>Missing <wsse:Security> in SOAP Header</summary>
</part>
<part name="detail">
<detail>javax.xml.ws.soap.SOAPFaultException: Missing <wsse:Security> in SOAP Header</detail>
</part>
<part name="code">
<code>wsse:InvalidSecurity</code>
</part>
</remoteFault>
</bpelFault>
Please let us know how to proceed with this?
Thanks in advance
RegardsYou need to attach the below policy in security section (Select your partnerlink in the references section of composite.xml and the click on "Configure WS policies")
oracle/wss_username_token_client_policy
if it is Secured Webservice, then attach this policy
oracle/wss_username_token_over_ssl_client_policy
After attaching policy, click edit and configure the key(out of box, u see one key csf-key) . This key should be setup with the required username and password that matches with the Webservice expected username and pwd.
Thanks,
Satish
http://soadiscovery.blogspot.com -
How to add item in column header
How can i add an messageStyled item(or any item) in column header? if so how can i do this
Standard framework feature allows to add only a sortable header bean in a column header which holds some of the UI and runtime properties for that column.
If you can explain your requirement, we can suggest the way to achieve that.
--Shiv -
How to get information from SOAP header in weblogic without handlers
I need to retrieve information from SOAP header without handlers.
Any ideas how to do that?Just wondering if Filter can be used here, though I never tried that.
-
Hi Experts, oo hierarchical alv, how to add checkbox on every header?
Hi Experts,
I am working on oo hierarchical alv, how can I add checkbox on every header? thanks in advance!
Kind regards
DawsonHi Dawson,
Just refer the below program & pass the check box functionality (mentioned in bold) in REUSE_ALV_HIERSEQ_LIST_DISPLAY in your program.
TYPE-POOLS : slis.
Data
DATA : BEGIN OF itab OCCURS 0.
INCLUDE STRUCTURE t001.
DATA : flag tyPE c,
END OF itab.
DATA : alvfc TYPE slis_t_fieldcat_alv.
DATA : alvly TYPE slis_layout_alv.
Select Data
SELECT * FROM t001 INTO TABLE itab.
*------- Field Catalogue
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'ITAB'
i_inclname = sy-repid
CHANGING
ct_fieldcat = alvfc
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
Display
alvly-box_fieldname = 'FLAG'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
it_fieldcat = alvfc
i_callback_program = sy-repid "<-------Important
i_callback_user_command = 'ITAB_USER_COMMAND' "<------ Important
is_layout = alvly
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
CALL BACK FORM
FORM itab_user_command USING whatcomm TYPE sy-ucomm whatrow TYPE
slis_selfield.
LOOP AT itab.
itab-flag = 'X'.
MODIFY itab.
ENDLOOP.
IMPORTANT.
WHATROW-REFRESH = 'X'.
ENDFORM. "ITAB_user_command
Regards
Abhii... -
How to add Variable in variant attributes in query
Dear all,
User required to add one variable (e.g. Last Week date) in variant attribute.
For example: If we select D: Dynamic date calculation then in that case i want to add one variant attribut (Last Week).
How i can maintained this.
Thanks in advance.
PMDear All,
I want to Add Variable name to Dynamic Date Calculation List as Last Week.
How i can create variable for Last week.
Thanks in advance.
PM -
OWSM: How to encrypt payload and SOAP header?
Hi,
Anybody know how I can encrypt the payload and the SOAP header via OWSM? I can only find references on how to do it using SSL. The reason for using OWSM/WS-Security was to move away from using transport based encryption (SSL).
Regards Petehttp://download.oracle.com/docs/cd/E10291_01/doc.1013/e10299/policy_steps.htm#sthref612
if you look at the topic :XML Encrypt
you will see you can encrypt every part of the xml
Encrypted Content
Part of the SOAP envelope to be encrypted. Valid values are: BODY, HEADERS, ENVELOPE, and XPATH. The default is BODY.
Maybe you are looking for
-
Creating Job with CmdExe Step failed with error Reason : 5
Hi, I setup a job with Type = Operating System (CmdExec) and Run as 'SQL Server Agent Service Account' , it failed to run with Message below : Message Executed as user: PROD\sqlserveragent. The process could not be created for step 4 of job 0x5A83AE4
-
Question: How do I copy (old) music content from iPod to iTunes on a new PC? I don't want to lose the content on my iPod.
-
Need help in populating Text ID using IDOC ORDERS05
I have following scenario. PO is being send from ECC to EDI partner. and we received the PO feedback from the EDI partner For PO feed back, we are using ORDERS05 idoc type and ORDRSP message type. Custom Text Id(F01) has been added to the Text tab o
-
Video is not working in my nokia mobila E5
by mistake you tube link in internet folder was deleted, after that i am not able to watch video and showing error
-
Query of queries in a function
I call my report through a command such as the following: <cfquery name="myquery"> select * from somewhere </cfquery> <cfreport template="myreport.cfr" format="flashpaper" overwrite="no" query="#myquery#"> <cfreportparam NAME="commdate" VALUE="#commd