How to add warning message while using 'print' function in Adobe LiveCycle Designer

I am trying to make pdf document for my company which requires adding a warning message while anyone use 'print' function from the page...
Does anyone know how to add warning message on LiveCycle Designer
Also my supervisor mentioned something using 'nag' if that rings any bell

No you shoudl never go into the XML source unless uinstricted to do so.
You can open the script editor (under the window menu). It will appear above the drawing area but below the toolbars. You can resize it if there is not enough room. When you click on an object in the form you can choose an event to script against in the Show dropdown. In your case you will want to choose the prePrint event. A line will show up that indicates the object that is associated with the script as well as the event and other information. Add your script below this line. Once that is done you are finished and your form is ready for testing.
Paul

Similar Messages

Please wait message when opening form created by Adobe LiveCycle Designer ES 9.0

Problem
Please wait message when opening form created by Adobe LiveCycle Designer ES 9.0
Full message
Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/products/acrobat/readstep2.html. For more assistance with Adobe Reader visit http://www.adobe.com/support/products/ acrreader.html. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S
Actions
Updated Windows RT 8 to 8.1
Uninstaled Adobe Reader Touch 1.3 and instaled 2.0 Build 84770
Additional Information
The form was created 10 or 11 months ago, and we are pretty sure that we were able to open it a while back
The same PDF file opens just fine in Windows 8.1 using Adober Reader XI 11,0.06, it is only the app that is affected.
The document cannot be opened by any other mobile app that we have tried or on another mobile OS (iOS)
Any ideas?
Thanks & Regards
Jim

The user's assertion is surprising to me, but perhaps I'm missing something important. I thought the correct position was from the conclusion of my earlier post "it can't be done". Adobe state their Reader Touch doesn't support XFA (http://blogs.adobe.com/readermobile/2012/12/13/adobe-reader-for-windows-8-tablets/). Unless (see that blog entry) you changed the type of form.

Canon MP560. How to override U043 message for using scan function?

Hi, I've no ink cartridge on my Canon MP560, at the moment.
How can I override U043 error message for using scan function?
I tried to push and hold stop button for at least 10 seconds but it didn't work.
(OS: Windows 7)

Hello Coz,
It's been a while since you've posted, I hope you have not given up. I was having grief with my MF4150 as well, but got it working. There is a more current driver - search for Mac_UFRII_V230_uk_EN and install it.
Then, when you go to add your printer through System Preferences > Print & Fax, make sure you click the "default" icon in the top of the dialog. It should show your Canon MF 4100 series , then use the bottom drop down menu to choose your driver and select Canno MF410 Series UFRII LT (UK) from the list.

How to format body message while using SO_DOCUMENT_SEND_API1?

hi,
           i am having some data in internal table that i want to format as text message and mail through SO_DOCUMENT_SEND_API1 function module but not as a attachement. i am using contents in body message. but i am not able to do formating , is there any way ?
internal table:
claimid claimdate    expensetype amount
0001     01.06.2008 FUMD          20000
0002     02.06.2008 SUND              500
0003     05.06.2008 ENTM             1500
i want to print this in message body part and send it throgh mail, while using write statement , it takes lot time.
plz suggest me.
Saurin Shah

Hi
Take a table as mentioned below.
GT_OBJTXT LIKE SOLISTI1
       OCCURS 0 WITH HEADER LINE,      " Mail Text options
and populate the data that you want to print as body in this table line by line.
Formating/allignment only can be done while populating the table. U have to check the mail and keep adjusting the allignment.
And after populating send the table to one table parameter in funciton module that is...
            CONTENTS_TXT               = LT_OBJTXT.
This will populate the mail body.
<REMOVED BY MODERATOR>
Venkat.
Edited by: Alvaro Tejada Galindo on Jun 12, 2008 2:17 PM

How to find exception occured while using LOGON function in oracle 10g

Hi,
I am using LOGON function to login with a different user name in oracle 10g forms.
LOGON ( User, Pass@tns, FALSE)
The third parameter is passed as 'FALSE' to avoid the login screen to be opened. If any of the other parameter ( User Name, Password, TNS) is passed wrong, connection is not established but no exception is occurred. The value for 'FORM_FAILURE' is set to 'TRUE'.
What i need is the ORA error for connection failure. The error message related to user name/password (ORA-01017) or connection identifier (ORA-12155).
How i can get this error code if connection is failed. Is there any other way to login in oracle forms other than 'LOGON'.
Habib

Habib Ahmad wrote:
Hi,
I am using LOGON function to login with a different user name in oracle 10g forms.
LOGON ( User, Pass@tns, FALSE)
The third parameter is passed as 'FALSE' to avoid the login screen to be opened. If any of the other parameter ( User Name, Password, TNS) is passed wrong, connection is not established but no exception is occurred. The value for 'FORM_FAILURE' is set to 'TRUE'.
What i need is the ORA error for connection failure. The error message related to user name/password (ORA-01017) or connection identifier (ORA-12155).
How i can get this error code if connection is failed. Is there any other way to login in oracle forms other than 'LOGON'.As salamu alikum, Habib
If you pass FALSE in login you can't catch anything. Want to catch the error ?
Then change
LOGON ( User, Pass@tns, FALSE)
to
LOGON ( User, Pass@tns, TRUE) Now Create On-Error trigger at form level
and try the following code
if error_code=01017 then
     message('invalid user name or password');
     message('invalid user name or password');
     raise form_trigger_failure;
elsif error_code=12154 or error_code=1215 then
     message('invalid connection string');
     message('invalid connection string');
     raise form_trigger_failure;
end if;Hopes this helps
If someone's response is helpful or correct, please mark it accordingly.

How to convert data type while using @variable function

Hi Gurus,
I have a query.
i have created a Derived Table and the statement is given below.
select 1 as SENSITIVITY_LEVEL,1 as SUBSENSITIVITY,@variable('US_T') as NITEMS, ...........
here in @variable('US_T') "US_T" is hard coded value. I want to change to data type of hard coded value as numeric or integer
i am using sap BI 4.0 universe design tool.
Thanks in Advance.
Regards,
Jeet

Hi Jeet,
Since it is text you can't convert into number.
Can you please let mw know the exact requriement of yours?
why you need this
Thanks,
Swapnil

Yellow warning messages while Using cells in a query

I created a query that uses cells and in each one there is a calculation. In my rows i have a structure that contains just titles, like Plan, actual, etc. I keep getting yellow warnings saying they are not defined. It lets me run the query and the results are right. How do I get rid of the warnings and more importantly are they something I need to be concerned with.
thanks

Technically the selections are empty and nothing has been defined in them. But you ignore the messages and suppress them in Bex as well as in RSRT.
Hope this helps...

PRINT BUG? ADOBE LIVECYCLE DESIGNER 8

Can any one help? I have produced a complex form with many text fields all these fields have the same field properties apart from the field name.
When text is entered in Adobe Reader 8 or Adobe Acrobat Professional 8 it saves to file as it should. The problem I have is that the form cannot be printed off fully. Only some of the text fields print, most remain blank.
This is not just for the text fields but I have also the same problem with some check boxes where some print off and others don't even though on screen all the data and checks can be viewed.
I can only assume this is a bug because it happens to some fields and not others in the same form.
Also I added a PRINT button from the standard menu and this does not appear to do anything when clicked - it just hangs. Anybody got any solutions? Thanks

I've found an answer to my own question.....it was a font issue. When all fields (including check boxes & radio buttons) are changed to Arial everything is fine! Plus don't forget that field properties should be changed to "visible".
The PRINT button issue is still a mystery!

How to assign local variable to global variable dynamically in adobe livecycle designer 7.1

Hi All,
i want to assign my textfield value to global variable dynamically.so that where ever i want , i will access my global variable.so it is possible in adobe livecycle designer 7.1. kindly suggest me method.Thanks in advance.
Thanks & Regards
Ganesh

Please remove all adobe livecycle designer versions from your local pc.
restart your pc to be sure, that all temp data is deleted.
download the newest ald version from service.sap.com and install it.
have fun with developing adobe forms with sap transaction sfp.

How to avoid warning messages in jump targets

How to avoid the warning messages while using the jump targets from BW to R/3 ?
example of warning message is as follows .
Warning Selection for ABSTA cannot be uniquely assigned.
RSBBS setting is done for the multiprovider & uses the info source 2LIS_11_VAITM .

try doing the following:
1.you can suppress "Settings > Suppress warnings from server" messages on ur BEx toolbar .
2.Go to transaction RSRT, type in the query, click on the messages button, and suppress all messages
3.In RSBBS, go to the sender query in change mode. There should be a tab in the middle column where you have to give your infosource name..
For. eg If you want to jump from Cost centre report (BW) to Masterdata transaction in R/3, you ust assign this particular infosource in RSBBS settings.
4.Apply note: 971614 or 975164 or OSS : 1013370 if applicable.
Reagrds
Dhanya.
Assign points if this helps!!

General Warning Message while creating po

Hi Gurus,
Good Morning.
I want to pop-up a warning message while creating all types of PO saying that "Contact Person & Email ID text should be filled "
This message should be applicable to all PO .
How to create a message and assign in PO ?
Thanks & Regards,
Vikas

Hi Archit,
Thanks for your reply.
How to create a new Text No. & Message Text ? or if i want to use any existing text no & Message Text how can I change the Text Description ?
Thanks & Regards,
Vikas

How to show warning message in am

How to show warning message in am but not Stop , it still can go ahead.
Thank you very much.

jamras ,
If i got you correct you wanna show user a list fo warnings after that have occured in some method in AM, and show them to user collectively, and the processing of the page should not stop in the above. What you need to do for it, is instead of throwing warning message in AM, collect all warnings in a arraylist or vector. when you navigate back to CO, iterate through this arraylist/vector and for each use pagecontext.putDialogmessage(oaexception).In this way you will be able to show all warning messages on page and your processing will not stop!
--Mukul

How to add log messages in the sever/webui objects?

Hi,
I am new to the OA Framework.
Can any one share any information in how to add log messages in the sever/webui objects?
What are the beans I need to use to show in the diagnostic page?
Can I get sample code for this log staments?
Thanks in advance,
Padma

Hello. This forum is for reporting problems with the published Oracle documentation. You have a better change of getting a reply if you post your question on the Database - General forum.
Regards,
Diana

Pop up warning message while creating PO

Hi,
How to give a Genral or a POP up Warning Message while creating and checking a PO in ME21n and ME22n.
Even i tried in changing the local setting in the menu bar, but it doesnt work.
Help and suggestions will be much appreciated.
Thanks & Regards.
Kumar.

Hi Jay,
I tired with the BADI ME_PROCESS_PO_CUST in the method IF_EX_ME_PROCESS_PO_CUST~CHECK, but still i am able to display only error message not Warning message.
Any suggestion regarding this.....
Thanks & Regards.
Kumar.

How to add image file while creating addon...pathsetup?

Hi friends,
i have a problem while creating addon.
while creating addon we can add all the files(.vb,xml).but if i add image files(.bmp,.jpg)they are not displayed in runtime.
--how to add image file while creating addon..?
we are useing SAP Business One 2005A(6.80.317)SP:01 PL:04

Somebody knows like I can indicate to him to a button that I have in a form, that accedes to the image in the route where will settle addon? I have this, but it does not work to me
oButton.Image = IO.Directory.GetParent(Application.StartupPath).ToString & "\CFL.BMP"

How to add warning message while using 'print' function in Adobe LiveCycle Designer

Similar Messages

Maybe you are looking for