How to adjust "activation" underline position on Menu?

I created a Chapter index and the underlining button Highlight when the chapter is activated is arbitrarely off to one side and not centered.
I can offset the text and have it look somewhat purposeful, but better yet how can i simply adjust the underline itself and make it where i want to be?
Grrr.
-Mike

Similar Messages

How to show active page in Spry Menu Bar using images

Hi,
I have already read this answer "how to show active page in spry menu bar" but I am using images, not text. I have mouse-over and mouse-out working in the Spry Menu Bar using image.png and image-over.png, but I cant' figure out how to get the image-over.png to appear on the active page since the spry menu bar is locked on the individual pages. (I tried to put it in an editable comment, but spry wouldn't go for it. :-)
Any ideas. Here is the code:
<ul id="MenuBar1" class="MenuBarHorizontal">
       <li><a href="../index.html" id="home" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image8','','../images/all_pages/home-over.png',1 )"><img src="../images/all_pages/home.png" alt="Home Page" name="home" width="58" height="20" border="0" id="Image8" /></a></li>
       <li><a href="../show.html" id="show" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('show','','../images/all_pages/show-over.png',1)"><img src="../images/all_pages/show.png" alt="The Show" name="show" width="101" height="20" border="0" id="show" /></a></li>
        <li><a href="../team.html" id="team" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('team','','../images/all_pages/team-over.png',1)"><img src="../images/all_pages/team.png" alt="The Team" name="team" width="97" height="20" border="0" id="team" /></a></li>
        <li><a href="../company.html" id="company" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('company','','../images/all_pages/company-over.png',1)"><img src="../images/all_pages/company.png" alt="The Company" name="company" width="139" height="25" border="0" id="company" /></a></li>
        <li><a href="../beatles-tickets.html" id="tickets" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('tickets','','../images/all_pages/tickets-over.png',1)"><img src="../images/all_pages/tickets.png" alt="Tickets" name="tickets" width="75" height="20" border="0" id="tickets" /></a></li>
        <li><a href="../media.html" id="media" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('media','','../images/all_pages/media-over.png',1)"><img src="../images/all_pages/media.png" alt="Media" name="media" width="61" height="20" border="0" id="media" /></a></li>
        <li><a href="../news-reviews.html" id="news" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('news_reviews','','../images/all_pages/news_reviews-over.png',1 )"><img src="../images/all_pages/news_reviews.png" alt="News-Reviews" name="news_reviews" width="149" height="20" border="0" id="news_reviews" /></a></li>
        <li class="MenuBarHorizontal"><a href="../contact.html" id="contact" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('contact','','../images/all_pages/contact-over.png',1)"><img src="../images/all_pages/contact.png" alt="Contact Us" name="contact" width="79" height="20" border="0" id="contact" /></a></li>
     </ul>
Thanks so much for helping!
Cheers,
Janell

Just found this page:
Persistent Page Indicator
Update: Drat, it is for text menus only not using images. :-(
Cheers,
Susan

How to adjust the underline in Pages

So I had this problem on Pages where a line I underlined something and the underline was too high on that one for some reason making it hard to see so I did something to make the underline lower and thicker and now I regret it and don't know how to change it back to default as it has made underlines look unordinary even in my browser
What do I do?

Toolbar ▸ Format ▸ Text panel ▸ Spacing. Click the word Spacing to expand its structure. Now you have the means to adjust line spacing.

How to adjust Start/Stop position of a song on the iPhone (not iTunes)?

Hello all,
Before I caught my flight today, I decided to make a ringtone of my new favourite song. Obviously one of the steps in doing so involves selecting a specific start and stop position within iTunes be fore creating the ringtone.
So I got on the plane and realised that I didn't remove the start/stop positions on the song after creating the ringtone. Now i'm stuck with only a 40s interval being able to be played!
Please tell me there is a way to change the start/stop position of the song within the actual iPhone as I won't have access to my iTunes library for quite some time!
Any help appreciated.
Regards
iPhone 3G2 32bg, 3.1.2

No

How to adjust the blog thumbnail pic?

In iWeb08 if you drop a picture into a blog entry, it automatically shows up on the main blog page as a thumbnail which is great. The problem is how to adjust that thumbnail (position/size)? There seems to be no way?

Go to main blog page
click on photo (this will then expose a photo properties box)
Hope this helps

How to adjust Column width using SHD0 for FB60

Hi,
How can adjust ( i have to reduce the length) Assignment filed in the FB60 transaction using SHD0.
Please help in this regard.
Regards,
Kishore

HI,
I think you can adjust the column width and save it as Screen Variant in the SHD0.
When you create a screen variant for the MIRO, adjust your column width and position than save it the variant. Once you save and activate the variant, it will appear in the Layout dropdown box on MIRO.
OR
Please check in spro with ur functional consultant to explore if the field can be made not mandatory..
menu path:
AR and AP -> Customer Accounts -> Line Items -> Display line items -> display line items without ALV

How to adjust the value of the digital potentiometer such that it outputs a desired value of voltage.

Hi all, I have a digital potentiometer in a circuit which needs to be adjusted to control the voltage it receives. Its a 2 channel 256 position AD5207 dig pot. I need to adjust the wiper position of the dig pot(which we need to do using labview)such that it outputs a particular desired voltage value.For example, if the input to the pot is 200mV, then we need to adjust the pot such that it sends out a value of 50mV. How can we do that?? Please help. The DAQ iam using is PCI-MIO-16E-4. Thank you......Ausuri

Hi Chaitanya,
We never know who our audience is when we answer these questions. There has ben quite a few occations when I have insulted people because my answers was too basic.
The creattion dates on the files show that "project xx SPI.vi" has the latest mod date.
Open it and take a look at the diagram.
Put the VI in execution-highlighting mode (click the light bulb) and the run the VI and watch what happens.
There are pictures included in the diagram that illustates what is happening.
If you have specific questions after watching the VI run, ask away.
This is a wonderful example!
I would have charged big bucks for this example.
Good work Wha!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How to adjust the green (starting) and the red (end) rectangles pixel by pixel (top, bottom, left and right) by changing the number of pixels in ken burns.

How to adjust the green (starting) and the red (end) rectangles pixel by pixel (top, bottom, left and right) by changing the number of pixels in ken burns. Help please.

If you look closely at the top of the canvas pane, as you move either of the boxes (green or red) there is an indication of pixel positions... "top, bottom, left, right," and "scale."
Admittedly, it doesn't seem as if you can "enter" the dimensions with your keyboard, however, as you move the boxes, you have a real time indication of the boxs' locations.
(I couldn't take a screen shot, as you have to actively move the box with a mouse or other input device... thus, I could not also take a screen shot with same device.)
I hope this helps.

LR4.1 - Tone Curve - how to adjust individual RGB channels?

Hi,
I am having trouble figuring out how to adjust the curve of individual RGB channels. I am assuming the LR4 Tone Curve works like the PS Curves dialog with the channel dropdown.
The LR4.1 Help says:
To make adjustments to individual points on the tone curve, choose an option from the Point Curve menu, click the Edit Point Curve button , and do any of the following:
Choose an option from the Channel pop-up menu. You can edit all three channels at once, or choose to edit the Red, Green, or Blue channel individually.
When I click the little icon in the lower right corner of the Tone Curve panel, the panel shrinks so that I don't see the Regions sliders. If I click again, they are visible again. I can't find where to select one of the three indvidual channels.
The Help refers to "the Point Curve menu." Where is the Point Curve menu? Is the Point Curve different from the Tone Curve?
If I right-click (Windows) in the curve dialog, the context menu has a Show Info option. I click it on/off and don't see any change or any info. Where should I be looking for info?
Thanks for any help here.
John

Good morning John,
The point curve is the one without the sliders. The adjustments for the individual channels are only available with
PV2012. You must be editing a file with PV2010 or 2003. When in PV2012 you will see " Channels: RGB" below the curve window. Click on the doule triangles following the RGB
to pick the individual channel.
HTH
Rich

How to adjust the path of a tween using actionscript

I'm a novice at Actionscript3 and would greatly appreciate an answer to what seems like a simple question:
Here's my project:
http://home.comcast.net/~samiri/director/mortals/amadoFlashPortrait/index.htm
Click on the gray scale frame images. A larger version of that image tweens out along the z axis. However it comes from 'somewhere else' not from 'within the frame.' How do I get the each larger gray scale frame image to look like it comes directly from the place where the user clicks (not to one side or the other)?
So I guess what I'm asking is how to adjust the path of the tween along the x and y axis using the actionscript code (below).
My method:
I'm using this line of code in my script:
var myTween:Tween = new Tween(mdImg, "z", Strong.easeOut, 300, 0, 1, true);
"mdImg" is the variable that holds the name of the hotspot clicked upon by the user.
I have the larger (faded edge) image positioned directly on top of the frame image and just kept invisible until the User clicks on the hotspot over the frame image.
Thanks much.

Thanks moccamaximum,
By "do your tweens manually" you mean to use the timeline to do frame-based tweening? That is an option but I'm wondering (as a newbie): Isn't it better to use actionscript to do animation since you have more control and it's time based rather than frame-rate based (and works better on low performance machines)? Just curious if I should be spending the time to learn actionscript or do it in the traditional way.
Thanks

SAPScript: how tu adjust heigh and width of standard text (logo)?

Hi!
how to adjust heigh and width of standard text (logo)?
I do not want to edit the logo, because it is used elsewhere, so I need to adjust heigh and width when using it in a form.
For now stadard text comes over the window. Here is how I use it:
INCLUDE ZHEX-LOGO OBJECT TEXT ID ST
Will reward,
Mindaugas

Hi Mindaugas,
While uploading using RSTXLDMC. You have to maintain your size of the logo.
Go through below mentioned document.
Upload TIFF files to SAPscript texts
Description
The report RSTXLDMC allows a TIFF graphics file to be uploaded from the file system of the R/3 GUI to a standard text in the R/3 word processor SAPscript. (TIFF is a registered trademark of the Aldus Corporation.)
When uploading, the TIFF graphic is converted either into a black and white raster image (parameter type=BMON ) or as a color raster image with a maximum of 256 colors (parameter type=BCOL).
The black and white raster images ( BMON) can be printed using the following printer types:
PCL-5 printer
PostScript printer
Kyocera PRESCRIBE printer
Device type SAPWIN (with SAPlpd 32-bit as of Version 2.41 for Windows NT or Windows 95)
The color raster images (BCOL) can be printed using the following printer types:
PCL-5 printer with color capability (e.g. HP Color LaserJet). Color graphics are not printed properly on monochrome PCL-5 printers (e.g. HP LaserJet 5), because the printer cannot set the color palette as required and does not perform any gray-level conversion.
PostScript printer (color graphics are automatically converted to gray levels on black and white printers using PostScript) Device type SAPWIN (with SAPlpd 32-bit as of Version 2.41 for Windows NT or Windows 95) During TIFF graphic import, the basic set " Baseline TIFF 6.0 " of the TIFF specification 6.0 is supported.
To maintain compatibility with earlier versions of the report RSTXLDMC, it is also possible to convert the TIFF graphic directly into a black and white raster image for a particular printer type when uploading. These are the three printer types PCL-5 (parameter type=PCL ), PostScript (parameter type=POST) and Kyocera PRESCRIBE (parameter type=PRES ). A raster image uploaded in this manner can only be printed using the appropriate printer type.
Besides TIFF raster graphics, direct printer commands in the respective printer language (PCL-5, PostScript or Prescribe) can also be contained in the file which is to be uploaded (printer macros). They are then transferred to the standard text unmodified.
The graphics are output by inserting the standard text into the document which is to be printed, directly or using an INCLUDE command. The printer commands, which for example draw a company logo on the page, are only output if the print request is processed by the printer driver corresponding to the macro type, otherwise they are ignored. Example: A macro of type PCL is contained in a print request. If the request is output to a printer with type HPLJIIID (to which the driver HPL2 is assigned), the macro data is sent to the printer. If the request is printed on a printer of type POSTSCPT (to which the driver POST is assigned), the output of the macro data is suppressed.
In the standard text, the printer commands are inserted between the HEX ... ENDHEX command lines in hex notation. Various report parameters allow the graphic or printer macro to be placed on the page or at the current text position. Note: When the /:HEX command line which precedes the macro appears in the text, a line break is generally made before the graphic is output. The output of the macro therefore begins in the next text line at the left window border of the current page window, as long as a shift to the right is not specified (see below).
If your own printer macros are uploaded and not TIFF files, you must ensure yourself that the normal (text) output of the driver is not impaired when the printer commands are inserted in the output from the uploaded file. The printer drivers pass the data contained in the file to the printer unmodified, therefore without control over the individual actions this triggers on the printer. For example, syntax errors should not be generated by the PostScript commands (type POST), or form feeds should not be contained in the file (unless this was intended) for PCL-5 (type PCL).
Restrictions:
In general, the output of graphics generated via RSTXLDMC from R/3 is not suitable for mass printing (that is, unless you are using the "Graphic resident on printer" feature): the R/3 spooler has to hold significantly more data in its output files. If the graphics occur several times in a spool request, the data also reoccurs. Apart from this, the network is more heavily loaded in sending the increased volume of data to the printer and the printer output is slowed significantly (varies according to printer model) if raster graphics are output as well as the text.
If your graphics reside on your printer during a printing job, the degree of 'correctness' with which they are printed depends on the amount of memory available in your printer. R/3 print drivers are unable to determine whether the amount of memory available is enough! If one of the graphics that you have marked as resident is not displayed, try reloading the graphic and switching off the parameter "Graphic resident on printer".
When printing black and white graphics on PCL-5 printers, image data is compressed in order to greatly reduce the file size.
The output of graphics and macros on PCL-5 printers, PostScript printers and device type SAPWIN (type BMON, BCOL, PCL, POST) is adapted to the page orientation used, that is if landscape is used instead of portrait, the graphic is also turned when output. This is not the case for the PRESCRIBE printers (type BMON, PRES)! With these printers, the graphic is not automatically turned when landscape is used, but appears on the page in the identical position as for portrait. You are therefore recommended not to output raster images when printing in landscape on PRESCRIBE printers.
PRESCRIBE printers do not support the resolutions 200 and 600 dots per inch when printing raster images.
Not all PCL-5 compatible printers support the resolutions 200 and 600 dots per inch when printing raster images.
TIFF graphics with compression type 2 ("CCITT Group 3 1-Dimensional Modified Huffman run length encoding ") can currently not be imported although this is a component of the Baseline TIFF 6.0 specification for monochrome images.
Color TIFF graphics with full color representation (ie. a lot more than 256 colors) are automatically converted into 256 gray levels when uploading with type BCOL.
When TIFF graphics are converted to black and white raster images (type BMON, PCL, POST, PRES) there is no default simulation of gray levels or colors of the original image on the printer (for example, by using different tones of gray). Each pixel of the original image is converted to a white or black pixel on the printer according to its intensity value.
The parameter "Number of TIFF gray levels" does, however, allow a simulation of gray/colour tones of the original image through levels of gray on the printer, when using type PCL, POST or PRES. This parameter is ignored for type BMON.
The conversion of TIFF graphics can be so time-consuming that it is recommendable to execute the report RSTXLDMC in batch processing. Note: in batch, the file is always read from the file system of the application server (ie. not from the file system of the GUI).
The length of an individual text in the text file is limited. When importing TIFF graphics with very large dimensions, especially if more than 2 gray levels are used, a termination can therefore occur when saving the standard text ("EXPORT_TOO_MUCH_DATA"). This restriction can only be avoided by reducing the TIFF graphics. Note: The display of a raster image in Postscript or PRESCRIBE format needs from two to three times as much space as displaying in PCL-5.
When processing very large TIFF images on PostScript printers, a print termination can occur with PS error message "limitcheck". In this case the internal memory of the printer is insufficient to scale the required raster image. This implementation limit cannot be influenced by changing the report parameters when importing.
Requirement
The file which is to be uploaded can contain the following formats/ commands:
Baseline TIFF 6.0 raster image files. The image information of the TIFF file is converted into black and white/color raster images when uploading. Note: As the TIFF format allows a variety of variants, only a basic set of TIFF 6.0 formats is supported here described in the TIFF 6.0 specification as Baseline TIFF 6.0.
PCL : PCL-5, Hewlett Packard Printer Control Language 5 for HP LaserJet 3, 4, 5 series and compatible printers. The data is output by the printer driver HPL2 only.
PRES: Kyocera PRESCRIBE for Kyocera laser printers. The data is output by the printer driver PRES only.
POST: Adobe PostScript or EPS format (encapsulated PostScript ) for PostScript printers. The data is output by the printer driver POST only. In the upload, one of the end-of-file markers (CTRL-D, hex $04) which may be contained in the PostScript file is not transferred.
For PostScript files which contain a bounding box entry (for example, all EPS files) the macro/graphic can be scaled to a size specified by the user. In this case, a small lead text and trailer are generated by the report for the macro data and inserted in the standard text.
Parameters of RSTXLDMC
File name
Path and file name of the file to be uploaded in the file system of the R/3 frontend (dialog processing) or in the file system of the application server (batch processing)
Type
Way which the data contained in the file is to be converted. Possible values are BMON, BCOL, PCL, POST and PRES. With parameter values BMON and BCOL, a TIFF 6.0 file is expected. This is converted into either a black and white raster image (BMON) or a color raster image (BCOL). These raster images are printer-independent and can be printed using various printer types (see above).
With parameter values PCL, POST and PRES, either a TIFF 6.0 file or a file with printer commands in the appropriate printer langauge is expected. If the file is a TIFF file, it is converted into a black and white raster image for the printer type specified in the parameter. The presence of a TIFF file is recognized automatically. If the file is not a TIFF file, the file contents are regarded as the printer macro of the respective type. Data loaded with type PCL, POST or PRES can only be printed on the respective printer type.
Resolution for TIFF raster images
Resolution which should be used when importing a TIFF raster image, in dots per inch (dpi). If an allowed value is entered here, this overrides the resolution information in the TIFF file. The allowed values are:
75 dpi
100 dpi
150 dpi
200 dpi (not for type PRES, for PCL only HP LaserJet 4,5 series)
300 dpi
600 dpi (not for type PRES, for PCL only HP LaserJet 4,5 series)
Changing the resolution affects the size of the graphic on the printer. If a resolution of 300 dpi is stated in the TIFF file and this parameter is set to 75 dpi, the graphic is four times as big when printed as at the outset.
Note: Kyocera PRESCRIBE printers do not support 200 and 600 dpi resolutions.
Note: Not all PCL-5 printers support resolutions 200 and 600 dpi, for example HP LaserJet 3 series does not, but LaserJet 4 and 5 series do.
Graphic Resident on Printer
Normally, graphics that occur more than once in a printing job (a company logo that appears on each page, for example) are sent to the printer repeatedly each time they are needed. In order to avoid this kind of redundancy, you can select this checkbox on the selection screen. The R/3 print driver then stores the graphic in the printer's memory and the printer retrieves the 'resident' graphic memory every time that re-occurs in your job.
Caution: Whether or not the printer correctly reproduces the graphic depends on the amount of memory available in the printer during the printing job! You should avoid using this feature with color graphics since they take up a lot more memory than monochrome graphics.
This parameter can only be used with types "BMON" and "BCOL".
Absolute positioning
Determines whether the macro/graphic is positioned absolutely or is to be output at the current text position. If this checkbox is selected, the graphic is positioned absolutely (parameters "X-position" and "Y-position" are used), if this checkbox is not selected, the graphic is positioned at the current text position (parameters "Reserved height" and "Shift to right" are used)
Absolute X-position
Horizontal position (space from left border) of the macro/graphic, if absolute positioning is required. This is the parameter XPOS of the HEX command.
Absolute Y-position
Vertical position (space from upper border) of the macro/graphic, if absolute positioning is required. This is the parameter YPOS of the HEX command.
Reserve height automatically
If this checkbox is selected, the system automatically inserts the actual height of the graphic during printing into the subsequent "Reserved height" parameter.
Reserved height
If positioned at the current text position, this parameter specifies the horizontal spacing to be reserved for the macro/graphic, which must not be printed with text from the paragraph. This is the parameter HEIGHT of the HEX command.
Shift to right
If positioned at the current text position, this parameter specifies the space between the left border of the macro/graphic and the left border of the page window. If this value is increased, the macro/graphic is shifted to the right. This is the parameter LEFT of the HEX command.
Unit of measurement for positioning
The unit of measurement in which the position values (X,Y, height, shift) are specified. Possible values are CM (centimeters), MM (millimeters), IN (inches), PT (typographic point = 1/72 inch), TW (1/20 point = 1/1440 inch)
Text title
Comment used for the attribute "Title" of the standard text generated as well as as a comment line in the text itself
Line width
Number of columns to be used in the standard text when generating the HEX...ENDHEX command lines. The default value is 132
Text name
Name of the standard text to be generated. If an * character occurs in the name, it is replaced by the value of the parameter "Printer type". For example, if the entry is ZHEX-IMAGE1-* and the printer type = PCL, the text name ZHEX-IMAGE1-PCL is generated. The default value for the name is ZHEX-MACRO-<printer type>, but the standard text can be named as required (take into account customer reserve). Standard texts are client-dependent!
Note: The name of a standard text can be up to 32 characters long !
Text ID
ID of the standard text to be generated. The default value is ST (general standard texts)
Text language
Language key of the standard text to be generated. The default value is the logon language
PostScript scaling
Flag which determines how the macros/graphics of type POST are handled. If set to 'X', the report expects a PostScript comment line in the file
%%BoundingBox llx lly urx ury (e.g. %%BoundingBox -1.5 0 21.4 14.1)
as present, for example, in all EPS files, in which the dimensions and the position of the macro/graphic are specified (if a bounding box comment is not included, 0 0 1 1 is assumed as the default value). This information is then used by the report to insert PostScript commands which scale the macro/graphic to the size specified in the parameters "Width" and "Height" (listed below).
If the flag is set to ' ' (blank), the PostScript file is transferred to the standard text without any additions (any transformations to the coordinate system used by the printer driver must already be contained in the file).
The flag must be set to 'X' for the import of TIFF files for type POST.
Width according to PS scaling
Required width of the macro/graphic if the flag PostScript scaling is set. Can remain at zero for the import of TIFF files, the size is then determined by the resolution of the graphic.
Height according to PS scaling
Required height of the macro/graphic if the flag PostScript scaling is set. Can remain at zero for the import of TIFF files, the size is then determined by the resolution of the graphic.
If you want to scale the PostScript graphic with these parameters, one of the two values, width or height, can be specified with zero. The graphic is then scaled so that the width-to-height ratio remains unchanged and the original graphic is not distorted.
Unit of measurement for PS scaling
Unit of measurement in which the parameters "Width" and "Height" are specified. Possible values are CM (centimeters), MM (millimeters), IN (inches), PT (typographic point = 1/72 inch), TW (1/20 point = 1/1440 inch)
Number of TIFF gray levels
Number of gray tones which are to be used on the printer for displaying the original image. Note: This parameter is only evaluated when using types PCL, POST or PRES!
Possible values are 2,4,9. With the default value 2, each pixel of the original image is converted either to a white or a black pixel on the printer. With the value 4, each pixel of the original image is converted on the printer with 4 pixels, which simulate 4 different gray levels. With the value 9, each pixel of the original image is converted on the printer with 9 pixels which simulate 9 different gray levels.
Note: With values 4 or 9 the resolution of the image is doubled or tripled. The restrictions on the possible resolutions (see previous parameter) then apply for the resulting resolution.
Output
Individual steps of the upload procedure are logged in the report list generated and, if necessary, errors reported. The uploading of TIFF graphics, in particular, is cancelled if there is a variant which is not supported. A message to this effect is then issued. If execution is successful, the report generates a standard text with the key specified in the parameters. If the standard text already exists, a window appears with a warning before the text is overwritten.
Regards,
Ameer Baba.

How to adjust volume of Airport Express speakers on Apple TV?

Hello,
I've just setup my Apple TV (bought in November 2012).
The latest version of the firmware allows to select AirPort Express speakers as default audio output. This is great.
While watching Youtube videos or listening iTunes music, I can't find how to adjust the output volume.
I am forced to set it by using the speaker remote control which is quite frustrating.
Any clues?
I've attached a photo of the Apple TV screen while playing a Youtube video. There's an output selector. But I can't access the volume options.
Thanks a lot!

Hit "up" two times to bring up "movie menu", then hold down "select", then navigate up and over to "speakers" tab, then down to your "AirPlay speakers", then move slider to right to increase volume
DONE!!
found it here so i dont deserve the credit but you guys should know - i struggled with this for hours wondering why the streamed audio was so low
https://discussions.apple.com/thread/2600145?start=120&tstart=0

How to adjust brightness in windows vista?

I can't figure out how to adjust the screen brightness. On the mac osx install disc 1 which supposedly has all the drivers, it did not hve the mac keyboard driver or the nvidia graphics card driver either. I found latter on the internet without much hassle, but I can't find a keyboard driver anywhere, so I'm stuck with this full brightness screen that really burns my eyes out, as well as draining a lot battery power when unplugged from the mains.

If you are also an administrator on your account click the drop down box on the recovery menu where it says 'administrator' and see if your account is listed. If it's the only account listed have you tried entering no password?
If that fails then google for 'hirens boot cd' which has a reset tool for Vista on the CD.

How can I change the position of the tab bar?

I just can't get used to the tab bar being on top in Firefox 4. I keep closing open pages by clicking on the bookmarks menu bar. How can I swap the position of the two bars?

Please click the '''Helpful''' button next to the answer that solved your Firefox support issue, '''when you are logged in''', so this thread gets marked as '''Solved''' to help other users who may have this same problem.

How to disable the run-time popup menu in the sequence display on TestStand Operator Interface, that allow the use to skip the test?

How to disable the run-time popup menu in the sequence display on TestStand Operator Interface, that allow the use to skip the test?

Hello,
Regarding the skip/force pass/force fail options, when I set the ControlExecFlow to True in Teststand 3.1 and 3.5, in the Sequence Editor the menu options for skip/force pass/force fail are not active for Technician but, when I launch the Operator Interface logged with Technician the options are active. The problem is that if the technician sets one step to one of these options, and change the user to Operator, the test step remains skip/force pass.
Is there any possibility without modifying the Operator Interface (at programming level), to reload default values of the steps when changing the user to Operator?
Thank you,
Best regards,
paio

How to adjust "activation" underline position on Menu?

Similar Messages

Maybe you are looking for