How to adjust the BIOS to enable the RAID function.

My MB is 845PE Max2(MS-6704) and the BIOS version I used is AMIBIOS A6704IMS v3.1 022803
I need to know how to adjust the BIOS to enable the RAID function.
Also, please tell me how to utilize 845PE max2 with RAID function.
I've enabled the Integrated peripheral device/IDE RAID in BIOS.
But the system still failed to detect my HD that I installed on IDE3-4.
Please tell me which part I missed.
much appreciated!!.

Got the same problem here.
Furthermore, i can't get the raid controller to get working in winXP. (device won't start)
MSI 845PE MAX2-FIr GB-L/2.0/1394 (MS-6704)
P4 2,4 ghz 533 fsb
2x 512Mb kingston PC 2700 , DDR333.
MSI G4 Ti4200-VTD8X
WinXp pro + SP1 installed
The board has 4 ide connections
Got all kinds off trouble with this board X(
Did install Windows XP Promise Fasttrak TX controller (PDC20276) , the device will not start.....
IEEE 1394 Host Controller installed, the device will not start....
Multimedia-videocontroller , no drivers available....
Nice going, this really drives me up the wall!
Don't know what to do anymore, plz help! ;(

Similar Messages

  • Can't boot into Windows 8 Single Language 64 bit or access the BIOS screen with the F1 key

    I have in my possession right now a Lenovo E49, Model name: 3464
    I am unable to access the BIOS settings at POST by pressing the F1 key.  Neither does it respond to the Enter key when it displays the message "To interrupt normal startup, Press Enter".  I am also unable to boot into the installed OS Windows 8 Single Language 64 bit.
    For your informtion, these are the events that led to this issue.
    I accessed the BIOS settings at startup using the CHANGE PC SETTINGS option in the CHARMS menu in Windows 8 Single Languge 64 bit followed by GENERAL and ADVANCED STARTUP.  Then I chose Restart Now.  Windows restarted to produce the startup screen where I chose Troubleshoot, followed by Advanced Options and UEFI Firmware Settings, followed by Restart.  This took me to the BIOS settings screen. Once there I changed the boot settings in BIOS so that SECURE BOOT was turnned OFF.  It was in ON state prior to that.  I also changed the BOOT MODE to LEGACY ONLY.  I also changed the BOOT ORDER to boot from DVD drive first followed by the Hard Disk and USB Hard Disk.  I saved the changes by pressing F10.
    Now the computer is able to boot from the DVD Drive.  I tested this by inserting a Windows 7 Repair DVD and also a Linux Live DVD.  Mind you, I didn't mke any changes to the Hard Drive.  I'm also able to boot from a USB Hard Disk.  This too was tested by inserting a bootable USB HD that had both Windows 7 and Windows 8 OS installers.  I used only the command prompt feature in the Repair option on the Windows 8 installer to ensure that I could access the partitions on the HD.  I did not in any way install Windows 7 or 8 on the HD.
    If there is no bootable DVD or USB HD inserted, the laptop is involved in a loop that restarts followed by a message that says the following:
    "Intel Undi, PXE-2.1 (build 083)
    Copyright (C) 1997-2000 Intel Corporation
    This product is covered by one or more of the following patents:
    US5, 307, 459,  US5, 434, 872,  US5, 732, 094,  US6, 570, 884,  US6, 115, 776 and US6, 327, 625
    Realtek PCIe GBE Family Controller Series v2.41 (06/08/11)
    PXE-E61: Media test failure, check cable
    PXE-M0F: Exiting PXE ROM."
    I am positive that the current state of the BIOS is such that it does not accept any input keys like F1 and F12 at POST so that the BIOS can only be accessed through Change PC Settings in Windows 8 as I had done prior to the occurence of the issue.  Since I cannot boot up Windows 8 I cannot use this method to access the BIOS.  And since it is not possible at this stage to access the BIOS settings through the F1 key, I believe Lenovo must have surely provided another alternative to enter the BIOS.  Can you kindly tell me what other way is there to do this.  In earlier days, one could reset the BIOS by shorting the BIOS through pins on the motherboard.  Is that possible now?  Or is there some Lenovo BIOS utilily that enables me to change the BIOS setting to boot with Legacy and UEFI?  Or do I have to install Windows 8.1 64 bit in Legacy mode?

    I'll see if another member of the team can jump in here and offer more help...
    What I might imagine is that you can only access BIOS from a cold boot. Windows 8/8.1 have hybrid shutdown and don't completely shut down the machine normally, so even when it powers off, it isn't fully off and the next boot is not really a cold boot.
    Please see this KB.  I realize this assumes you can get into windows.
    As you suggest, it also seems as though you have set legacy vs UEFI and that may be why your drive is not currently booting.   Can you remove the battery on your system?  If not, is there a reset hole on the bottom?  Removing battery and AC and pressing and holding the power button several times, then re-attach AC and Battery and try to restart and press F1 to get into BIOS.  (Not familiar with models that use enter for BIOS).
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • TRANSFORMATION STARTS AGAIN, WHEN I RESTART THE COMPUTER OR ENABLE THE CAPTURE PROCES

    Hello all,
    I am using a Transformation function which is invoked by Capture process whenever a
    delete is performed on source table, then Transformation function collect the required
    data from LCR and stores in some other local table.
    When capture process is online, Transformation function is doing it's job well.
    But whenever I restart the system or whenever I enable the Capture process,
    the Transformation function is called again, Though I am not performing any
    delete operation on source table.
    Due to this I am finding lot of duplicate records in the target table.
    Hence, Transformation function is repeatedly called whenever I restart the system or
    enable the Capture process.
    => Is it concerned with any kind of clean up or commit.
    => Or Am I have to clean up redo-logs right after the execution of Transformation function.
    How can I stop this unnecessary execution of Transformation function.
    Thanks in Advance.
    Regards,
    Srinivas Jaltaru
    ( [email protected] )

    Hello Patricia,
    Thank you very much for that suggestion.
    As you said, Now I created capture process and an apply process for replication inside a
    database.
    Capture process is enqueing events to queue, But Apply process is not able to dequeue events
    from that queue.
    I created this environment for replication between two same-structured tables inside scott schema.
    If I get positive result for this simple case, then I can move for DML_Handlers etc.
    Replication between 2 databases is looking more straight forward and easier to implement thatn this
    local database issue.
    Am I have to define propagation also...?
    I tried defining propagation , which should dequeue events from source queue and enqeu event to
    destination queue which is in the same schema, Then apply process should dequeue events from this.
    But this is also not happening.
    Or any special settings/initialization parameters are required for replication inside a
    local database.
    Many Thank in advance.
    Regards,
    Srinivas Jaltaru

  • Flashing the BIOS: What is the Correct/Safe Procedure?

    Can someone who has successfully Flashed the BIOS on a Toshiba please give a Step-by-Step procedure of using the safest method via a bootable CD/Floppy?  A single tread with the correct procedures and recovery methods would benefit all of us.  While I have flashed the BiOS of my computers through Windows and without failure, I plan to do my next session--if absolutely necessary to fix a specific problem--via a bootable floppy using a USB Floppy Drive.
    I have read through these forums--and many others from different computer brands--and noted the many problems with users incorrectly flashing their BIOS' or having a failure while flashing within Windows.  The result is a required trip to a Toshiba certified computer shop for an EPROM flash ($100+) or a new motherboard ($300+).
    Please provide any caveats regarding flashing and any recovery tips that might work before sending your rig to the shop for repair.
    Thank you.
    QosX505-Q879__ i7-720QM__1.6 GHz (2.8 GHz Turbo)6MB__PM55 Express Chipset__NVIDIA® GeForce GTS 360M w/1GB GDDR5/1274MB via TurboCache @ 2298MB__Physical Mem @ 6GB DDR3 1066MHz__64GB ATA SSD__500GB (7200) ATA HDD__Blu-ray Disc® ROM/DVD__18.4 LCD @ 1920 x 1080i native__Win7 P X64_SP1_3-120MM Fan NZXT Cooler_Rec 2/19/10
    NZXT ACC-NT-CRYO LX Aluminum Notebook Cooler 120MM Adjustable Fans
    __ CD-ROM-R-RW@ (24x)/CD-RW (24x)/DVD-ROM-R Single @ (8x)/DVD(4x) RW(6x) +R(4x)+RW (8x)/DVDRAM@(5x)/BD_ROM@ (6x)__8.4”TruBrite® TFT LCD @ 1920 x 1080i native (FHD) 1080i__

    Go to the Product Support Link at the top of this page, enter in your model, then clik on the Download Tab to find the available bios files for that model.  DO NOT update the bios from within Windows.  Don't do it, don't even think about doing it if you want to use your computer again.  When you double click on the download you will be presented with the choice of creating a CD to flash the bios from.  USE THIS METHOD.  You can use a CD-RW so you don't waste a blank, but even the cost of a regular blank CD is cheap compared to the $100 that most places will charge you to fix a botched bios flash.  Be sure to burn the CD at the slowest possible speed to ensure the best possible quality.  Make sure that your battery is fully charged, installed, and the AC Adapter is plugged in just in case. 
    And don't forget to go into the bios and hit the F9 key to load Bios/Setup Defaults then F10 to exit and save just prior to and immediately after updating the bios.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Hi, I am in Dubai I am an iPhone 5 bought Seller Account ICOLD himself on the phone to enable the option Faynd My iPhone enabled Bvdbd I Ayfvnv Rsyt got my account Vpsvvrd account to the seller wants the Frshndh I do not Aymylshv me, it's no password says

    Hi, I am in Dubai I am an iPhone 5 bought Seller Account ICOLD himself on the phone to enable the option Faynd My iPhone enabled Bvdbd I Ayfvnv Rsyt got my account Vpsvvrd account to the seller wants the Frshndh I do not Aymylshv me, it's no password says

  • As through the bios to disable the integrated graphics?

    Hello.
    as through the bios to disable the integrated graphics in the laptop HP pavilion 17 e-011sr? or tell me the firmware for the bios on this model with switchable graphics

    Hi timon20025,
    Thank you for your query.
    If there is not an option in the bios to disable the integrated, then it is not possible.
    The latest bios is Version F.31, 9.16M, which you can get from HP Pavilion 17-e011sr Notebook PC Drivers page.
    Here is a link to Updating the Bios for your convenience.  I suggest contacting HP for the Bios update as it does have a potential to cause damage.
    Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • How to monitor WebLogic Server when enable the Administration Port

    It works fine when use Listenport 7001, but when enable the Administration Port(9002), it does not work.
    Maybe I should do something to set the system environment property, but how?
    help~
    Sorry for my poor English~
    Thanks~

    HI,
    If the admin port is enabled then you have to use these parameters to run any scripts
    -Dweblogic.security.SSL.ignoreHostnameVerification=true
    -Dweblogic.security.TrustKeyStore=DemoTrust
    -The you can use Admin URL: t3s://localhost:9002 with Admin Port and Secure Protocol.
    Example:
    java -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.security.TrustKeyStore=DemoTrust  weblogic.WLST application_status.py
    Initializing WebLogic Scripting Tool (WLST) ...
    Welcome to WebLogic Server Administration Scripting Shell
    Type help() for help on available commands
    Connecting to t3s://localhost:9002 with userid weblogic ...
    Successfully connected to Admin Server 'AdminServer' that belongs to domain 'Domain_7001'.
    .Regards,
    Ravish Mody
    http://middlewaremagic.com/weblogic
    Come, Join Us and Experience The Magic…

  • I enabled my older 2014 version of Bridge. How do I undo that and enable the current Bridge?

    I was asked if I wanted to enable my 2014 version of Bridge and said yes which I now realize was a mistake. How do I get it back to the current 2015 version of Bridge?

    There is only one version of Bridge, and that is CC.  It has not been updated except for Adobe Camera Raw 9.0  Do you mean Lightroom?
    If so you should know Lightroom CC is a separate install. LR 5.71 is still installed.

  • How to adjust webpages to fully fit the C470 screen

    Hi all
    Appreciate any guidance on how to adjust the size of a webpage to fully fill the 21.5" screen of C470. Enlarging by Ctrl+ or Fullscreen F11 won't help as the zooming originate from the centre outwards resulting in the truncation of the height of a webpage. Thanks in advance
    Regards
    kh

    Doesn't always work the way you think it should but you could try dropping the Broadcast Safe filter on the entire clip.
    You could also just cut the clip where the brightness first appears and add the 3 way Color Corrector. Adjust it to where you like it and then add a disolve between the clips. (may or may not do it for you depending on how the bright spot comes into frame, but it's a fast workaround) Could keyframe the 3 way in if you like.
    There are other things you can do with the 3 way to limit it's effect but to get a grip on it you should probably refer to the manual.
    rh

  • How to adjust plot names visibility in the legend of a XY-graph automatica​lly

    I have a XY garph that shows 3 plots. Sometimes I need to close some plots on the graph. I can do it. But I also want to delete the plot name on the legend of the graph too, I could not do it. How can I do it? The program is attached.
    Egemen
    Solved!
    Go to Solution.
    Attachments:
    P-h diagram maker representation.vi ‏29 KB

    The solution is actually a bit more complex than you may expect, since you have to change both the plot and the plot characteristics.  Attached is something that should work, although it is not very optimized and has some momentary, expected, display glitches.
    I do not have LabVIEW 2009 on my development computer, so I edited it in LabVIEW 2011 and saved for previous.  I don't think I used anything new, so it should work.  Let me know if you need more info.
    This account is no longer active. Contact ShadesOfGray for current posts and information.
    Attachments:
    P-h diagram maker representation-3.vi ‏26 KB

  • How can i re-automate/re-enable the daily, weekly, & monthly 'tasks'

    some time ago i was having trouble burning a home video with imovie. one of the suggested remedies was to disable the overnight cleaning up tasks, which i did. however, i'd now like to reset this so that these tasks are once again automated whilst i sleep (currently using MacJanitor).
    but i cannot for the life of me work out how to do this. please help.

    Open the application TextEdit. Under the TextEdit menu open the Preferences. Under the heading New Document Atributes select the Plain text radio button. Under the heading Default Plain Text Encodings select Unicode(UTF-8) in the drop down menu by Save:. Under the heading Saving check the box Overwrite read-only files. Put TextEdit into your Dock.
    From the Finder > Go menu select Go to Folder... Type /etc in the dialog box and press return. Locate the file- crontab. Drag the file onto the TextEdit icon in your Dock. The file should open. Your crontab file probably looks like this:
    # /etc/crontab
    SHELL=/bin/sh
    PATH=/etc:/bin:/sbin:/usr/bin:/usr/sbin
    HOME=/var/log
    #minute hour mday month wday who command
    #*/5 * * * * root /usr/libexec/atrun
    # Run daily/weekly/monthly jobs.
    #15 3 * * * root periodic daily
    #30 4 * * 6 root periodic weekly
    #30 5 1 * * root periodic monthly
    You need to remove the # on the following three lines.
    #15 3 * * * root periodic daily
    #30 4 * * 6 root periodic weekly
    #30 5 1 * * root periodic monthly
    Save the file and you should be good to go.

  • How to adjust userChrome.css to move the #identity-icon-label to the right side of the #urlbar?

    I hate the way the #identity-icon-label moves the URL over to the right. I've applied a patch to just hide it, but I'd rather make it behave more like IE8 and just have that box show up way over at the right end of the #urlbar.
    So far, my customization experiments in userChrome.css havent yielded the desired result. Also, I thought it would be nice for someone else to be able to search and find a solution to this issue. (If it can be answered.)
    Thanks :)

    Try code like this to set the wanted order.
    <pre><nowiki>
    #urlbar .textbox-input-box {-moz-box-ordinal-group:1!important}
    #identity-box {-moz-box-ordinal-group:2!important}
    #urlbar-icons {-moz-box-ordinal-group:3!important}
    </nowiki></pre>

  • The Bios keeps change the setting every time I start up my laptop!

    My laptop is satellite L500, Bios v 1.9 
    the problem is every time I start the computer the bios changes the setting and tries to boot from the LAN.
    when I press F2 and go to boot section I only found the CD, FDD and LAN, I found no HDD tab!
    so every time I have to load the default configuration and restart to access the OS!
    any idea how to fix this problem?
    for your info I've bought this laptop only 4 months ago - so I believe the Bios battery is fine- it was working normally but about one month ago this problem started .
    Thanks in advance

    Can you get into the OS?  
    Normally when you go to the boot menu (F12) there should be a Hard disk option.  If it is not listed then you possible have a bad hard disk.  When the hard drive is not seen it will try to boot to the next boot option, in this case the LAN.  

  • Help please, the leds my t61 turn on though not even the BIOS appears on the screen

    The title says all. After installing (dont know if it really have something to do) a modem usb and shutting down the laptop, the case, to transport it, i open it and the leds where turn on but no image appears. Then, i decide to force the reiniciate of the laptop, turn it off, and then push the power buttom, but, again, only the leds turn on but no image appears, not even the BIOS.
    Can someone help me please? Googling i've find two possible answers:
    i) whether the motherboard is dead. (Though, that will be totally unexpected, it was totally fine, and the laptop only have 1 year and a half. And yes, i have updated the BIOS, but that happent 2 weeks ago, and everything went fine)
    ii) i have to reset the bios (dunno exactly how to do it. But i keep the live cd of the BIOS which i use to update it. That means that i should use it?
    Further information: The fans are working, i can hear them.  No beep code.
    Thanks in advance.
    HELP!

    Just found the solution.  It was justa matter of performing an electro static discharge, pushing the buttom 10 times in a 30 sec gap. Now sounds silly but im sure will work for someone. Just remenber to unplug any power alimentation to the laptop first, pushing the button in the right intervals (i had to try for half an hour to perform the right pattern) and when you first time boot it after doing these plug in the AC adapter, without the battery (it took me another half an hour for these)
    cheers.

  • HT201302 I am trying to import photos taken on my iPod Touch to my computer. I read the support article and when I connect my iPod the auto play dialogue box does not appear so I followed the steps to enable the behavior but my iPod is not listed. What ca

    Am trying to import photos taken with my iPod touch to my windows 7 computer. When I plug in my iPod the Auto play dialogue box doesn't come up. I read the related article and tried to enable the behavior but when I go to the autoplay section and to devices the iPod does not appear in the devices menue . What can I do next? Thanks

    So you tried here:
    iOS: Importing personal photos and videos from iOS devices to your computer
    Have you looked here:
    iOS: Unable to import photos or device not recognized as a camera

Maybe you are looking for