How to adjust the column size

Hi All,
I have a table UI element and due to length of header my column is expanded in width. Kindly assist how I can adjust the column length so the look and feel is good. I am using NWDS 7.0 sp 05.
Thank you
Regards,
Jaspreet Kaur Grewal

Hi Jaspreet ,
Try to use less letter in header for table.
Refer to http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/601ca4c3-6e64-2a10-3380-949f9cdddd46?quicklink=index&overridelayout=true
Hope it migh helps
Regards
Arun

Similar Messages

How to increase the column size of Alv tbale

Hi All,
I created an Alv table to display the content of my database table. In one of the column the entire data from my database are not displayed the last few characters are missing. The data type for that column in the database is char. Can any one help me how to increase the column size in my Alv table or any suggestions to resolve this issue.

Hi Vadiv,
Try with this..
DATA: LR_IF_CONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE,
LR_CMP_USAGE TYPE REF TO IF_WD_COMPONENT_USAGE,
LR_CMDL TYPE REF TO CL_SALV_WD_CONFIG_TABLE,
LR_TABLE_SETTING TYPE REF TO IF_SALV_WD_TABLE_SETTINGS.
LR_CMP_USAGE = WD_THIS->WD_CPUSE_ALV( ).
IF LR_CMP_USAGE->HAS_ACTIVE_COMPONENT( ) IS INITIAL.
LR_CMP_USAGE->CREATE_COMPONENT( ).
ENDIF.
" get reference to the ALV model
LR_IF_CONTROLLER = WD_THIS->WD_CPIFC_ALV( ).
LR_CMDL = LR_IF_CONTROLLER->GET_MODEL( ).
LR_TABLE_SETTING ?= LR_CMDL.
" Set column width
DATA LR_COL TYPE REF TO CL_SALV_WD_COLUMN.
LR_COL = LR_CMDL->IF_SALV_WD_COLUMN_SETTINGS~GET_COLUMN( 'PERNR' ).
LR_COL->SET_WIDTH( '70' ) .
LR_COL = LR_CMDL->IF_SALV_WD_COLUMN_SETTINGS~GET_COLUMN( 'ENAME' ).
LR_COL->SET_WIDTH( '100' ) .
LR_TABLE_SETTING->SET_FIXED_TABLE_LAYOUT( ABAP_TRUE ).
You can refer to webdynpro component SALV_WD_TEST_TABLE_PROPS. Go to the view TABLE and look inside the method SET_COLUMN_SETTINGS. I hope this will help you.
Cheers,
Kris.

How to adjust the font size of iPad in printing a web page.

How to adjust the font size of iPad printout of web pages ?

In HTML Header I put textDid you mean Page Header Text? It wouldn't have done much of anything at all in the HTML Header...
However, the font doesn't do anything.Yet another universal selector problem: see +{message:id=4184109}+
How do I overwrite the style sheet? I am wondering if I change the default style sheet, does that also affect the other pages, which is not what I want. In that case you can just include the CSS inline, which will also get round the universal selector issue. You are also recommended to use a semantic HTML element instead of deprecated presentational elements like <center> and <font>. Assuming this text is the primary heading on the page, use <h1>:
<img src="#WORKSPACE_IMAGES#my_header_logo_white.jpg" alt="" title="Application" />
<h1 style="font-size: large; font-weight: bold; text-align: center;">Web Management System</h1>

How to decrease the column size in a tabular report

Hi ,
How can i reduce the column size in a tabular report in oracle apex.
my report is having 90 coulmns and i want that should come in once sceen so i want to decrease the size of columns as well as the font size of values + column_name..
any suggestion ?
Thanks
Nitin

Hello,
Oracle APEX OTN Forum is here : Oracle Application Express (APEX)
Regards

How to increase the column size of interactive report

Hi , I am using apex 4.2 and theme 25 ..
i did not find any option to increase the column size of interactive report. where as in classic report i can do so ,,
Please guide me to achieve that.
Thank You,
Nihar Narla

Nihar Narla wrote:
Hi , I am using apex 4.2 and theme 25 ..
i did not find any option to increase the column size of interactive report. where as in classic report i can do soThis can be done using CSS. Create a rule like this in the page Inline CSS property:
.apexir_WORKSHEET_DATA td[headers="COLUMN_ALIAS"] {
width: 10em;
}where COLUMN_ALIAS is the alias of the column in the report query and the width measure is whatever you require.

How to adjust the window size in overview screen of a scorecard ?

Hi Experts,
In <i>SEM</i> application is it possible to adjust the size of the "<b><i>Perspective</i></b>" windows in the Overview screen of a <i>Scorecard</i> ?
If possible how ?

hi,
If you change the window size of the script in the original language, it should reflect in the other languages.
Please activate the script in english once again and see the spanish form again.
@SAP_WIZ
As far as chaniging window size is concerned, Please edit your script in ES and then change it.Or login in ES and then edit the script.
This is not possible, because the original script is in english.
Regards
HM

How to adjust the display size?

The player scales itself into the browser window, which is a problem for videos (containing text). How can I managed to get the content displayed in original size?
I tried to adjust the index.html by setting fixed values in the showflash call. e.g. showFlash("viewer.swf", "100%", "600px", false). Thus the content is displayed with a limit of 600 px in heigth, including the background and bars of the player. The pixel value given has to be calculated by trial and error for each document size.
Is there a way to preset the size of the area the player uses to display the content or another solution?
Kind regards
Klaus
I'm using Presenter 8, MSOffice 2010, everything is up-to-date

Try selecting the pages you would like to display at 85% in the Page Thumbnail navigation pane. Right-click and select Page Properties. Click on the Actions tab and choose Go to a Page view from the dropdown.
Next, change the magnification of those same pages and click Set Link.
Each time someone navigates to those pages the magnification will change to 85%.

How to adjust the memory size of partition?

I have the mac os partition and bootcamp partition in my air now. And I installed win7 into the bootcamp for 190G. So I want to adjust the size of bootcamp and enlarge the mac os partition, and create a new partition for using time machine. Can I make it without losing any data?

Keeping no backups is a disaster waiting to happen so it is good that you are planning to use TimeMachine, but putting your backup on a partition of the drive you are backing up is almost like having no backup plan. There are lots of reasons you'd need to restore from a backup and many (if not most) would also leave your TM backup unusable. If your hard drive dies you'd have no TM backup. If your partition table is damaged you'd have no backup. If your computer were stolen you'd have no backup. If fire or flood destroyed your computer you'd have no backup. Buy an external hard drive and use that for TM backups and you can leave your computer's hard drive alone.

How to set the column size in OATable

Hi All,
I'm using Oracle EBS 11.5.10
I have a OATable with two columns (messagestyledText), say Col01 and Col02.
Is there a way that I can set the width of Col01 and Col02 ? As in 30% of OATable for Col01 and 70% for col02?
Thanks for any suggestion/help,
Elmer

Hi All,
Got the answer. How I wish this can be define declaratively.
Code below for the soln.
OATableBean table01 = (OATableBean)webBean.findChildRecursive("table01RN");
table01.queryData(pageContext, true);
table01.prepareForRendering(pageContext);
DataObjectList aColFormat01 = table01.getColumnFormats() ;
oracle.cabo.ui.data.DictionaryData ColFormat01 =(oracle.cabo.ui.data.DictionaryData)aColFormat01.getItem(pageContext.findChildIndex(table01, "ColLabel"));
//Column Width
ColFormat01.put(WIDTH_KEY, "30%");
//Column Format - Right-aligned varchar
ColFormat01.put(COLUMN_DATA_FORMAT_KEY,NUMBER_FORMAT);cheers,
Elmer
Edited by: Elmer on Mar 8, 2010 2:46 AM

How to adjust the page size

I have an indd file with a magazine, 44 pages, format 210 mm. x 275 mm.
My problem is that from the beginning I made it in A4 format. This is not a problem for the printing workshop, but it is a problem when I make a pdf file, because it comes out with 22 "empty" millimeters in the bottom. I tried to use File --> Document setup and change the height from 297 mm. to 275 mm., but this cuts only 11 mm. in the bottom - and the other 11 mm. in the top.
How can I do it right?

MySpecialSceenName wrote:
I don't understand
Nor do I.
I think it's normal for the page to shrink evenly top and bottom. is the content at the top of your page now cut off?
You might want to try again after enabling Layout Adjustment (Layout > Layout Adjustment). If the frames are touching guides they should move withthe guides.

Export to Flash how to adjust the video size from 640 to 320

Is there a way to change the size of the Flash video when exporting from Encore? The only setting I see is the quality drop down from low to ultra. Even on low it exports as a 640 by 480 video. Is there a way to change it to 320 by 240? Or is it determined by the size of the mpegs?
TIA
Dirk

Actually I have been playing around with this stuff today, here is what you do:
After you create the flash file with your index.html and swf and ect you can go into the HTML file and change the setting from 640x40 to 320x240. You can also create skins and stuff in there too using your HTML editor or manually playing with it yourself in Notepad like I do.

How to extract the column width in ALv report if its executed in background

I am executing an ALV report in background , in front end i am getting data properly, in back end for some columns some of the digits are missing.For example if PO no is of 10 digits it will display only 8 becos column size is like that , how to extract coulmns in back ground.
I have executed in background and checked the spool and for some of the columns width is not sufficient to display comeplete data so please suggest how to extract the columns sizes if executed inj background for an ALV

Hi Deepthi,
you can try with the above mentioned suggestions ,if its worked its fine ,
If not use Docking container instead of custom container, For ALV in back ground jobs, its suggest to use docking container instead of custom container , below you can find the declaration for docking container and code to use docking and custom container in your program for fore and back ground.
or you can use docking container alone for both operations.
Data : G_DOCK1 TYPE REF TO CL_GUI_DOCKING_CONTAINER,
IF CCON IS INITIAL. (ccon is container name )
*Check whether the program is run in batch or foreground
    IF CL_GUI_ALV_GRID=>OFFLINE( ) IS INITIAL.
*Run in foreground
      CREATE OBJECT CCON
        EXPORTING
          CONTAINER_NAME = 'CON1'.
    CREATE OBJECT GRID1
        EXPORTING
          I_PARENT = parent_1.
ELSE.
*Run in background
      CREATE OBJECT GRID1
        EXPORTING
          I_PARENT = G_DOCK1.
    ENDIF.
ENDIF.
B&R,
Saravana.S

How to set the stack size for alchemy application?

Anybody know how to set the stack size for alchemy application?
If you know, please tell me how to adjust the stack size for alchemy application?

Hi,
The stack size is set as public const gstackSize in the alchemy generated code. You can see this if you build with ACHACKS_TMPS set. The default is one megabyte.
One way to change the stack size is to use llvm-dis to disassemble avm2-libc/lib/avm2-libc.l.bc, generating avm2-libc.l.ll, modify the constant, and then use llvm-as to recompile your modified library and overwrite the old one. These utilities should be in your path if alchemy is set up.

How to adjust the layout column size in WPC?

Hi All,
I want increase/decrease the layout size in Web Page Composer?
After I dragged and dropped the html file, how to reduce the column width or height?
Thanks
Sundar

Hi
You can create a new layout with width and height as per your requirements and use the layout in WPC.
For creating new layouts, check the help link below
http://help.sap.com/saphelp_nw70/helpdata/EN/45/d2970be57f4ebbe10000000a11466f/content.htm
Regards,
Yoga

How can I adjust the font size of my printouts?

I have an HP Officejet 4500 all-in-one printer and a new HP pavilion Slimline computer. Since I changed to this computer, my printouts have very small font size making them hard to read. How can I adjust the font size of the printout? Is it a computer or printer function? I appreciate the help.

I, too, am frustrated. This seems like something that would easily be handled within the application software. However, none of the fixes I've been offered have been very helpful. My cousin sugested using Control C and Control V to move the text to WORD. Once in WORD, you can manipulate the text on a WORD page...sometimes. I've had good and bad luck with this method. It still requires working in two different programs to get it legible. Does anyone else have a 4500 All-in -one with this problem, or is it only me? Thanks, [Edited for Personal Information]

How to adjust the column size

Similar Messages

Maybe you are looking for