How to adjust the Fonts to fit the component

The size of the text is much smaller than the size of the button. But when I put the letters onto the button, they are not properly shown. Instead of showing the whole letters, they become "..." on the button. I can not see them at all unless I make the window/frame to its full size.
How to adjust the Fonts or the properties of the components?
Thanks.

The best way is to use a layout manager, so that your component is laid out automatically to fit.
If you really want to adjust the font size according to the size of the component, you would have to first retrieve the FontMatrix for your font, calculate the width of a particular string of text and see if it fits the component. However, why do that if you don't need to?

Similar Messages

How to adjust webpages to fully fit the C470 screen

Hi all
Appreciate any guidance on how to adjust the size of a webpage to fully fill the 21.5" screen of C470. Enlarging by Ctrl+ or Fullscreen F11 won't help as the zooming originate from the centre outwards resulting in the truncation of the height of a webpage. Thanks in advance
Regards
kh

Doesn't always work the way you think it should but you could try dropping the Broadcast Safe filter on the entire clip.
You could also just cut the clip where the brightness first appears and add the 3 way Color Corrector. Adjust it to where you like it and then add a disolve between the clips. (may or may not do it for you depending on how the bright spot comes into frame, but it's a fast workaround) Could keyframe the 3 way in if you like.
There are other things you can do with the 3 way to limit it's effect but to get a grip on it you should probably refer to the manual.
rh

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resoluti

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resolution, to no avail.
David.

Paragraph breaks are good for readability. ;-)
Have you noticed any difference between your MacBook and others at the Apple store? Wondering whether this is a configurable setting at the system level, i.e., DPI.
You can default Firefox to a larger zoom level to avoid having to zoom every page. You'll still be able to adjust the size for individual sites as needed. It sounds as though you are aware of these add-ons:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
There are some discussions about changing coming in Firefox 22 (I think) to address higher density displays like the Retina display. So perhaps there will be a built-in setting to address this in the future.

How do I get the picture to fit the screen?

I was playing around with the screen size and not can't get the picture to fit the screen. How to adjust the screen size? I tried everythign in the disoplays setings and can't get it right?

Open Preview and open Customize Toolbar. Install 'Zoom to Fit'.
Ciao.

TS3682 How can we get IOS7 to increase the font size of the keyboard in Messaging?

I absolutely detest the font size of the keyboard - it is too thin, and the contrast we used to have in ios6 was perfect! How do we complain loud enough to get Apple to give us a choice?

here are some guides
http://www.google.dk/search?client=opera&rls=en&q=osx+mail+font+size&sourceid=op era&ie=utf-8&oe=utf-8&channel=suggest

How can I change the font size on the post of WordPress?

I have found three websites which address WordPress style sheets:
Playing With Fonts: http://codex.wordpress.org/Playing_With_…
Font Size and Color: http://en.support.wordpress.com/editors/…
How to Change Font Size In Wordpress: http://www.ehow.com/how_5469172_change-f…
Here are the instructions from the third website above:
Things You'll Need:
Site designed in Wordpress
Administrator access
Step 1
First, to change the font size on a Wordpress site you need to log into the site as administrator. If you do not know how to reach the login page, simply add "/wp-login.php" after the "www.url.com" address. Then login using the admin sign in.
Step 2
Next, get to the Wordpress file editor by going to Appearance->Editor.
Step 3
Once in Editor, identify the Stylesheet file (style.css) and click to edit. This is usually located on the right hand side under the "Styles" heading.
Step 4
Once in the style.css file, you want to conduct a search for "fontsize". This parameter is used throughout the style.css file and is the parameter used to control font size. Next to "fontsize" you will see something like "16px". Simply increase or decrease the "16" to change font size. The tricky part is to figure out which "fontsize" you want to edit.
The way to do this is to first look at the heading it is under. If it is under "comment-template", it is obviously related to either the font size of the comments themselves or perhaps the comment form or the date/time stamp of the comment.
It may take a little trial and error to find the right "fontsize" to modify. Simply modify the one you think is correct and in a separate window, reload the page with the font you are looking to modify. If it did not change, undo the previous edit and try a different "fontsize".
I went to the Dashboard and clicked on the “Appearance” icon on the left-hand side, and then clicked on editor. I clicked on Stylesheet (style.css), but I have not been able to find the “fontsize” that would change my post font size. As the author writes: "The tricky part is to figure out which "fontsize" you want to edit." Some of the font sizes are given as a percentage, and I don’t know if these come into question, i.e., if I should try changing one of these to see what happens.
The end result is that I still have not been able to change my post font size, other than by using the Heading-1-through-6 option, which, I understand, is not the best way to do it.

From John Waller: “If you're using IE8, hit F12 to launch Developer Tools which give you a point and click method of locating the relevant CSS rule on screen.”
I have Internet Explorer 8 (IE8) so tried this method.
This sounded like another promising possibility; however, I have not been able to change the font size in my post using this method.
I have gone to Dashboard > Posts > Edit > then moused-over my post > clicked on "edit" and then hit F12. An enormous amount (20 pages or more) of CSS appears. I tried picking out the font size that I thought pertains to the post (under Text Area), and I have changed the font size from 13px to 24px; however, I have not been able to “save” the new setting. When I go back to it, it is back to 13px.
As a result, I have not been able to use a trial-and-error method to establish which font size I must change in order to change the font size of my post.

How to add a Font Button in the Top of the Help File

Dear all,
In some of the Help Files (HTML Help), i've seen a Font
button being added in the top of the Help File (for e.g next to
Home button)...when we click this font button, the font size of the
Content present in the Help File Increases/decreases
accordingly....how to add this button in our Help File.
At present i'm creating a HTML Help using Adobe 6..Kindly let
me know, if there are any options...
Thanks with regards

Hi usureka
Take a look at the following link. It should guide you.
click
here
Cheers... Rick

Using windows 8.1 and photoshop cs4 the font size of the MENUS is so small as to be almost unreadable. how do i make the menu fonts larger. this is happening also with bridge

Using windows 8.1 and photoshop cs4 the font size of the MENUS is so small as to be almost unreadable. how do i make the menu fonts larger. this is happening also with bridge

Thank you so much. You are absolutely right. I will have to reduce the screen density when I work with those programs.
Thanks for your trouble and regards
Quentin Sussman
<mailto:[email protected]> [email protected]
Cell: 082 4900 124
Home: 011 883 2582
Fax: 086 680 7981

Why Acrobat x professional is changing the text formatting specifically the font family and the font size of the text in my pdf on exporting it to Microsoft word file format ?How should i stop Acrobat x professional from doing that so that i get an exact

Why Acrobat x professional is changing the text formatting specifically the font family and the font size of the text in my pdf on exporting it to Microsoft word file format ?How should i stop Acrobat x professional from doing that so that i get an exactly same word file on exporting it from its pdf counterpart?

I was testing the preciseness & efficiency of Adobe acrobat x professional's doc conversion capabilities. As i have to take a document editing project in future which is going to need lot of pdf to word and vice versa conversions . What I did was I created a test word document converted into a pdf using a pdf maker in my word 2007 , Acrobat did convert the document from word to pdf keeping everything in the source file intact , However when i tried the other way round and attempted to convert the same pdf to word 2007 file format I lost my formatting ?So the font that I used to create the pdf are the ones taken from word 2007 which i believe is using the fonts that are installed in my computer. Any suggestions on how to preserve the formatting of the document after converting it from pdf to word file format?
Regards
Mike

How to change the font size of the text that is revolving ?

Hi there,
I am using the Revolution theme.
How to change the font size of the text that is revolving (on the first menu page) ?
Thanks

You can't. That's hard coded into the theme.
OT

How can you change the font size in the application and system headers?

How can you change the font size in the application and system headers? I searched the system and finder prefs to no avail. Changing the screen density is not a good option.
Thanks

I downloaded Tinkertool. Found the font section and increased the size of most selections. The only thing that changed that I can see is the window label. The apple line, bookmarks line, the tool bar in safari are all the same---font size of about 4. Found the finder "show view options" but that didn't seem to change anything either. I'll keep working. Restarted all apps after changes as well.

How can I change the font size on the Mail program?

How can I change the font size on the Mail program? The text is quite small right now.

Go to fonts and colors in Mail preferences and there you can change the font or size for the different parts of Mail.

How to Change the Font Color in the Podcast Archive Subheadings

If you go to pages.sparcc.org/The _Sanctuary, you will notice that the font colors in the subheadings are red. I was able to change them to the green everyone wanted except for the red "Archives". How can I change them?

Unfortunately, the text stylings for both the main blog index page as well as the archive page are controlled by the template. If you want, you can edit the xml template files buried in the iWeb application itself, but there is no way to do this from within iWeb directly.

How to increase the font size of the report output in the printout.

Hi Team,
i have a requirement like to print the report output as a direct print from an internal table.I am using the below mentioned code, the output is printing fine but the Font size of the output text is so small so i need to increase the font size of the text of output data.
call function 'GET_PRINT_PARAMETERS'
   exporting
     immediately                    = 'X'
     line_count                     = 65
     line_size                      = 320
     mode                           = 'CURRENT'
     no_dialog                      = ' '
     release                        = 'X'
     user                           = sy-uname
   importing
     out_parameters                 = st_param
   exceptions
     archive_info_not_found         = 1
     invalid_print_params           = 2
     invalid_archive_params         = 3
     others                         = 4.
if sy-subrc eq 0.
    new-page print on parameters st_param no dialog.
could you please suggest me how to increase the font size while printing the report output..
Thanks in Advance.
Puneet.

hey,
in our system when we click on print. on widow is coming.
there is a properties button.
we click on it.
there FORMAT----AND then we select forat from there and then printing .
not sure. but check on ur system. is there properites button.
HI,
READ THIS,
You can specify attributes such as the character width and font size in the device type formatting yourself.
contact ur basis team .
in the report PRINT-CONTROL SIZE option is there. try to find more o this.

Is there a way to adjust the font size in the digital signature?

The attributes, of Name, Date, Location, Reason, Distinguished Name, etc. Is there a way to adjust the size of the font and the display?
Thank you.
Chunkee

Hi Chunkee,
I know it's not what you want to hear, but the answer is no. You can change the font, but not the font size because Acrobat will try to fill the signature field using dynamic sizing. I've found that id the default Helvetica is too big you can experiment with different fonts as they have different proportions and will come out different sizes.
Steve

How to adjust the Fonts to fit the component

Similar Messages

Maybe you are looking for