How to adjust the score of multiple-SCO scorm package?

I used Captivate 4 and created 2 SCOs. I then used SCORM Packager to package the 2 SCOs into 1 SCORM package. Everything works well. I can upload the SCORM into LMS without problem.
My 1st SCO is pure information without quiz. The 2nd SCO is pure quiz. While LMS shows all interactions properly, it always gives "0" score for the 1st SCO, and report average score of the 2 SCOs as the final score. But I want LMS to report the result for the 2nd SCO only.
For the 1st SCO, I tried to set "slide view only" instead of "quiz result only" in the quiz setting, but it doesn't help.
Anyone encountered the same problem and know a solution? If there are multiple SCOs, some without quiz, some with quiz, how to adjust the setting so that LMS only report and average the score for SCOs with quizzes?

I dont' think I will be much help, as I too am getting into the whole SCO/SCORM world (shakes head in frustration)
However, I believe it's not considered a SCO unless it reports a score of somesort. The way I have read to get around something like this is to create the last button on your first SCO that the user clicks to enable reporting on that button, so that it reports to the LMS - and basically when the user clicks the button it sends a "success" to the LMS and records the score/points you put in.
Now does this help you? probably not, but it may point you in the right direction. If you could do me a favor though, it seems you were able to successfully put your SCORM package up to an LMS succesfully, I have just posted in this thread that I'm having an issue with doing just that. Let mek now if you could provide any insight into my problem.
Thank you.

Similar Messages

? Flash CS4, Is it possible to adjust the length of multiple timelines at once?

Hi,
I am using Flash CS4. Is there any way to adjust the length of multiple timelines at once? I am doing an animation of leaves falling from a tree. The leaves alone have 17 separate timelines on separate layers plus each has it's own guide layer.
If I had the ability to to select all of the timelines together and adjust all of their respective start and end times at the same same time, relative to each other as well as separately, life would be so much easier!
Of course I can do it timeline by timeline, no problem, but I can't seem to adjust the length of more than one timeline at a time. (no pun intended)
Even when I select more than one timeline, the double arrow only adjusts the length of one timeline. Even each guide layer's length has to be adjusted separately. I understand the benefit of this, but, testing timing and making adjustments would be so much simpler and go so much faster if I could select and drag multiple timeline lengths at the same time.
Is there any way to do this?
I'm new to Flash so, thanks in advance for your patience with me!
SabelV

Thanks! I had a feeling. It's nice to have the answer. Oh well, now I can get back to work and not waste any more time with that part of the puzzle. You've been very helpful and I'm sure your answer is correct. Wish I knew how to rate your answer even higher. Thanks again!

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

How to adjust the brightness of a second display connected to iMAC 2012 by Apple Mini DisplayPort to Dual-Link DVI Adapter?

How to adjust the brightness of a second display (Dell 3007WFPHC 2560x1600 dpi) connected to 27 inch iMAC 2012 through thunderbolt port by an Apple Mini Display Port to Dual-Link DVI Adapter?

Macs control computer by USB. With a non-Apple display, you will have to use the brightness control on the display.

How to adjust the path of a tween using actionscript

I'm a novice at Actionscript3 and would greatly appreciate an answer to what seems like a simple question:
Here's my project:
http://home.comcast.net/~samiri/director/mortals/amadoFlashPortrait/index.htm
Click on the gray scale frame images. A larger version of that image tweens out along the z axis. However it comes from 'somewhere else' not from 'within the frame.' How do I get the each larger gray scale frame image to look like it comes directly from the place where the user clicks (not to one side or the other)?
So I guess what I'm asking is how to adjust the path of the tween along the x and y axis using the actionscript code (below).
My method:
I'm using this line of code in my script:
var myTween:Tween = new Tween(mdImg, "z", Strong.easeOut, 300, 0, 1, true);
"mdImg" is the variable that holds the name of the hotspot clicked upon by the user.
I have the larger (faded edge) image positioned directly on top of the frame image and just kept invisible until the User clicks on the hotspot over the frame image.
Thanks much.

Thanks moccamaximum,
By "do your tweens manually" you mean to use the timeline to do frame-based tweening? That is an option but I'm wondering (as a newbie): Isn't it better to use actionscript to do animation since you have more control and it's time based rather than frame-rate based (and works better on low performance machines)? Just curious if I should be spending the time to learn actionscript or do it in the traditional way.
Thanks

How to adjust the size of a region?

Hello, would anyone know how to adjust the size of a region size?
Thanks for your replies!

Checkout an interesting article called " Oracle9iAS Portal Best Practices: Regions" to understand resizing region.
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/PUBLISH_CONTMGMT/TECHNOTE_REGIONS_0.HTML

How to adjust the font size of iPad in printing a web page.

How to adjust the font size of iPad printout of web pages ?

In HTML Header I put textDid you mean Page Header Text? It wouldn't have done much of anything at all in the HTML Header...
However, the font doesn't do anything.Yet another universal selector problem: see +{message:id=4184109}+
How do I overwrite the style sheet? I am wondering if I change the default style sheet, does that also affect the other pages, which is not what I want. In that case you can just include the CSS inline, which will also get round the universal selector issue. You are also recommended to use a semantic HTML element instead of deprecated presentational elements like <center> and <font>. Assuming this text is the primary heading on the page, use <h1>:
<img src="#WORKSPACE_IMAGES#my_header_logo_white.jpg" alt="" title="Application" />
<h1 style="font-size: large; font-weight: bold; text-align: center;">Web Management System</h1>

At the time of go-live, how to adjust the stock in the bins which match- -

Hello,
Materials are already distributed in to the bins physically where SAP WH mgt not implemented. When we implement the SAP/(at the time of go-live),we have following issues
When we go live, then how to adjust the stock in the system as per actual physical bin stocks in WMS?
OR
DO we have to tell user to adjust the stock in the bins physically as per the system stock?
Thanks

hi,
your stock level get differed between storage level and warehouse level? if so go to LX23 AND EQUAL THE DIFFERENCE.
if u want to change the bin level adjustment use lt01 and lt10 tran. as per your req(at the time of go live) adjust according your inventory stock.
regards
muthuraman.d
Edited by: muthuraman d on Dec 16, 2009 8:59 AM

How to adjust the size of the slide in keynote to 7.5 feet high x 3.1 feet wide?

How to adjust the size of the slide in keynote to 7.5 feet high x 3.1 feet wide?

Keynote is not designed to produce printed media, it is set up is for video. There are dozens of applications that are designed for printed output on the Mac, Pages, Word, In design, Quark, Open Office, Libra.
Pages is the accompanying application in the iWork suite that is specifically designed to print to paper, you should look at that first as it May be on your Mac already.

How to clean the html code multiple pages simultaneously with Dreamweaver or other soft ?

hello,
How to clean the html code multiple pages simultaneously with Dreamweaver or other soft ? I have hundreds of pages to clean
Thanks !

I would start afresh. I would also use Dreamweaver's template system to make thing a lot easier. Have a look at the following, copy and paste into a new document and view in your favourite browser.
<!doctype html>
<html>
<head>
<meta name="viewport" content="width=device-width, initial-scale=1.0">
<meta charset="utf-8">
<title>Untitled Document</title>
<link rel="stylesheet" type="text/css" href="//netdna.bootstrapcdn.com/bootstrap/3.1.1/css/bootstrap.min.css" />
<link rel="stylesheet" type="text/css" href="//netdna.bootstrapcdn.com/bootstrap/3.1.1/css/bootstrap-theme.min.css" />
<script type="text/javascript" src="ScriptLibrary/jquery-latest.pack.js"></script>
<script type="text/javascript" src="//netdna.bootstrapcdn.com/bootstrap/3.1.1/js/bootstrap.min.js"></script>
<style>
.hline {
    background: url(http://yannick.michelat.free.fr/barre.gif);
    height: 10px;
    margin-top: 10px;
    margin-bottom: 10px;
</style>
</head>
<body>
<div class="container">
    <div class="row">
        <div class="col-xs-7">
            <img alt="" class="img-responsive pull-right" style="margin-top:20px;" src="http://yannick.michelat.free.fr/Calanques.gif" />
        </div>
        <div class="col-xs-5">
            <img alt="" class="img-responsive center-block" style="margin-top: 40px;" src="http://yannick.michelat.free.fr/grandportfolio.gif" />
        </div>
    </div>
    <div class="row hline"></div>
    <div class="row">
        <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-01.jpg" alt="" class="img-responsive"></a></div>
        <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-02.jpg" alt="" class="img-responsive"></a></div>
        <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-03.jpg" alt="" class="img-responsive"></a></div>
        <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-04.jpg" alt="" class="img-responsive"></a></div>
        <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-05.jpg" alt="" class="img-responsive"></a></div>
        <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-06.jpg" alt="" class="img-responsive"></a></div>
        <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-07.jpg" alt="" class="img-responsive"></a></div>
        <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-08.jpg" alt="" class="img-responsive"></a></div>
        <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-09.jpg" alt="" class="img-responsive"></a></div>
        <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-10.jpg" alt="" class="img-responsive"></a></div>
        <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-11.jpg" alt="" class="img-responsive"></a></div>
        <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-12.jpg" alt="" class="img-responsive"></a></div>
    </div>
    <div class="row hline"></div>
</div>
</body>
</html>

How to adjust the text in input field

Hi Expert,
New in VC development. Can someone guide how to adjust the text in input field? Because of long text length it is not displaying fully in visual composer iView so user are not able to see the entire text in input fields

HI Kundan,
I assume that you have already tried different options perent in Label Postion for the field.
If none of these options meet your requirement then you can try the following workaround:
In the display properties, select label position as no label.
In the form view add a new UI Control for Plain Text or HTML text and change its Label to "Material Number".
Now place this new UI Control in before your actual Input field such that it appears as the field label.
Hope this helps.
Regards,
Rk

How to use the 'Decision between multiple alternatives' Process variant

Hi ,
Can anyone tell me how to use the 'Decision between multiple alternatives' Process variant in BI 7 Process chains ?
The requuirement is that I have a DSO eg DSO 1 from which i have to load DSO 2 and DSO 3 . Now if the number of Records in DSO 1 are < 100 i will load DSO 2 from DSO 1 else i will load DSO 3 from DSO 1 .
So in the PC i have used a 'ABAP Program' variant (which counts the number of rows in DSO 1) after loading DSO 1 and after this 'ABAP Program' Variant , i have used the 'Decision between multiple alternatives' Process variant. Problem is it is giving me only some some system fields in the formula , like sy-datum or sy-timlo , which are of no use here .
It would be great if i can receive some help here .
--Devraj

in RSPC you create a ABAP processing type "ending with specific values".
We use true or false for things as you specify.
your abap program should return a true or a false to indicate which of the situations is applicable.
Is this helpful?
Marco

How to distribute the scores to Perspective

Hi,
How to distribute the scores among Perspective (.i.e Financial 25%, Customer 35% Internal 25% and Growth 20%)? And then among KPI's per Objective under the Perspective? Is this possible? If so, how? Can it also be done using Entry and Approval?
Thank you very much in advance.
Rally

Rally,
Strategy Management was designed to be user friendly. On the Administrator page, you can pretty much work from top to bottom along the left column. That is the order you would follow when building out Strategy Management. Use the "Help" button on top to learn more - it's good documentation, though not put together in a way like a training program.
Training could help. There is online training for Strategy Management 7.0 and 7.5
http://www.sap.com/services/education/catalog/courseindex.epx
Once there, click in the letter "O" on the alphabet search at the top. Strategy Management courses are
OSM75 - SAP BusinessObjects Strategy Management 7.5 ( 7.5 just went into General Availability!)
OSSM70 - SAP Strategy Management 7.0 (note the two "S"s in the catalog number)
Being online you can plug in at any time. There should be about 30 hours worth of recorded lessons covering everything from the business use area to building models.
Regards,
Bob

How to adjust the height of the tracks in timeline mode

I am trying to find my way around PE 10, have had the program for years but not used it. (I am using Win 7 on a 15" laptop, screen resolution is 1920x1080, 16 GB Ram, 4GB video RAM.) I took some video on vacation, in some clips there is a lot of wind noise. I know how to adjust the volume using key frames, but the tracks are only about ¼" wide making adjustment just about impossible. Full volume to zero is just a small fraction of an inch. I can zoom in on the track, but this doesn't make the track wider. Is there any way to do this?
Thanks,
David

Actually, I wanted to do this in a static table.
Just now, I learnt that this feature is not available in 12.0 as well as in other previous versions.
However, this will be implemented in Release 12.1.
Thanks,
Navin.

How to adjust the width of a bar plot?

Hi,
I have to draw a bar plot and when I wire values to the chart for some reason they are almost 1 inch think for each number. I was wondering how to adjust the width such taht it is something more like 2 mm per entry?

What you seem to be running into is the autoscale on the X-scale. Right click on the X scale and turn off autoscaling. You will then have to manually set the scale to get the width that you want.
Hope this helps.
Rob

How to adjust the score of multiple-SCO scorm package?

Similar Messages

Maybe you are looking for