How to adopt the index changes during upgrade

Hi All,
Please let me know how to adopt the standard index changes during upgrade. We are not able to change using SPDD.
Regards
Anil Kumar K

Hi Micheal,
I have posted one query can you answer for that also.
Actually we are facing a problem in activating the table COEP. It is saying duplicate field name exist for GEBER. But we have checked all the tables and structures.But no duplicates.
Please help us..
Regards
Anil Kumar K

Similar Messages

How to increate the R3trans processes during upgrade ...

Dears,
I'm doing a Sap upgrade to ECC6+EHP4 and I selected the scenario "High resource use (minimal downtime, fast import, archiving off)" in the Configuration module.
The Downtime module is started but I saw the gui does not allow to modify the number of processes it's going to use like :
> MAXIMUM UPTIME PROCESS
> R3TRANS PROCESSES
I saw the XPRA_UPG phase is using 1 batch only, despite there are a lot of resources available.
As I'm planning others upgrade run in the next future for this sistem, I would like to know if there a way to increase the number of these processes, without changing the Scenario "High resource use (minimal downtime, fast import, archiving off)."
In this run the parameter MAXIMUM UPTIME PROCESS I suspect is set to 1; I would like at least to set it to 2 in the next run .
But I would like to continue to use this scenario "High resource use (minimal downtime, fast import, archiving off)." in the future, but increasing these parameters MAXIMUM UPTIME PROCESS and R3TRANS PROCESSES.
I read the 'Troubleshooting and Admistration Guide' but it's not described here; it seems the only way to change these parameter is to choose a completely different scenario (so called "Manual Selection")
How they can be changed ? Are they written in some file into the upgrade directory ?
best regards

Hello Roberto,
with this option ("High resource use (minimal downtime, fast import, archiving off)") it is not possible to change the key parameters that you're looking for.
For your case you should select the option "Manual selection of parameters". Please check the piece of log below to see the parameters you can change with this option:
>> 2009/05/27 15:12:57 START OF PHASE PREP_EXTENSION/INITSUBST
>>>> Choose configuration <<<<
Select configuration
01) - Standard resource use (archiving off)
02) - High resource use (archiving off)
03) - High resource use (archiving on)
04) * Manual selection of parameters
: Manual selection of parameters
>>>> Archive Mode <<<<
Choose an upgrade phase for disabling the archive mode. For more information,
see the upgrade guide.
If the archive mode is disabled, all production operation has to be stopped.
01) - No disabling of the archive mode (Archiving on)
02) * The archive mode should be disabled in phase STOPSAP_TRANS
Choose the archive mode:: The archive mode should be disabled in phase STOPSAP_TRANS
>>>> SGEN Execution Mode <<<<
Choose an execution strategy for SGEN. For more information, see the upgrade
guide.
01) - Do not start SGEN during the upgrade.
02) * Fill table GENSETC with relevant loads, but do not run SGEN.
03) - Fill table GENSETC and run SGEN with low resource consumption.
04) - Fill table GENSETC and run SGEN with high resource consumption.
Choose the SGEN execution mode:: Fill table GENSETC with relevant loads, but do not run SGEN.
>>>> Batch Configuration and Upgrade Processes <<<<
You need to supply information about the batch server and the number of
processes used.
Enter the host name of your batch server:
BATCH HOST: SAP_EXAMPLE
Enter the maximum number of batch processes during the upgrade:
BATCH PROCESSES: 5
Enter the maximum number of parallel processes during uptime:
MAXIMUM UPTIME PROCESSES: 1
Enter the number of parallel import processes during downtime:
R3TRANS PROCESSES: 3
As you can see, all these parameters are editable with this option. You should consider it in your future upgrades, in my opinion.
Best regards,
Tomas Black

BOM is changed after creating subcontracting PO,how to adopt the changes

Hi All,
BOM is changed after creating subcontarcting PO,how to adopt the changes in the BOM attached to the PO.
Thank you.

hi
try changing the po
go to me22n and in material item tab clcik on explode BOM
or just remove the item cat L ,enter and again put it
regards
kunal

How to get the "last changed by" for a set of function modules?

How to get the "last changed by" for a set of function modules?
is there any table to get it??

See [this|Re: Date of creation of function module] I posted earlier.
>TFDIR will give you the name of the function group program and the include number.
>E.g. SAPLZFUNCGROUP Include 01.
>From this you can construct the include name: LZFUNCGROUPU01.
>You can look this up in TRDIR to find the creation date (CDAT) of the function module.
In your case, you need unam and udat.
matt

How to use the index method for pathpoints object in illustrator through javascripts

hii...
am using Illustrator CS2 using javascripts...
how to use the index method for pathpoints object in illustrator through javascripts..

Hi, what are you trying to do with path points?
CarlosCanto

How to search the indexes in 11g Enterprise Manager Console

Hi,
After setting the Indexes using Java Embedding for a process, can you please tell me how to search the indexes in 11g Enterprise Manager Console for the particular process.In 10g BPEL Console we have the option of searching the Instances based on Indexes we already set at process level which is inbuilt in 10g. I need the same in 11g .
Thanks,
Sagar.

Hi Sagar,
You can define composite sensors in your composite.
Then you will get fields in enterprise manager of that composite instance.(the sensors you have defined will be displayed here)
You can enter the values based on what you want to search the instance. :)
Regards
PavanKumar.M

How to stop the auto change of the desktop background picture ?

How to stop the auto change of the desktop background picture ?

Well . . thanks, but I already have done that and I still have the problem. The background changes to the standard picture galaxy not to one of the options. Sorry my question wasn't clear enough.
Thanks.

How to get the index of selected values in SelectManyChoice...

How to get the index of selected values in SelectManyChoice... the value which i get is coming when i submit the value second time

By using the given code i get the value of the selected indices, but problem here is i get the value when it get submits at the second time... First time the length of that int array is 0.
Second time it shows the value two times (i.e) First time submitted value and the second time submitted value. After that it works fine.. I have problem while clicking first time only..
The Following error also raises.. One multiselect is dependent on other multiselect.
DF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase PROCESS_VALIDATIONS 3
java.lang.ArrayIndexOutOfBoundsException: 6
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding.findObjectFromIndex(FacesCtrlListBinding.java:334)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding.getInputValue(FacesCtrlListBinding.java:199)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.internalGet(JUCtrlValueBinding.java:2416)
     at oracle.jbo.uicli.binding.JUCtrlListBinding.internalGet(JUCtrlListBinding.java:3717)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding.internalGet(FacesCtrlListBinding.java:500)
     at oracle.adf.model.binding.DCControlBinding.get(DCControlBinding.java:749)
     at javax.el.MapELResolver.getValue(MapELResolver.java:164)
     at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)
     at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)
     at com.sun.el.parser.AstValue.getValue(Unknown Source)
     at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)

How to display the index of current desktop when enable multiple spaces

I was using 10.6 before and used to using Spaces and puts applications into different desktops.
Now I'm using 10.8 and I know that the Spaces has been integrated into Mission Control.
The problem is, I can see the current desktop on the top bar in 10.6, but in 10.8 I cannot see it so I usually forget where I am.
Does anyone know how to display the index of current desktop?

Does anyone know how to display the index of current desktop?
Brute force - - I have written the number of the Desktop directly onto the wallpaper picture I am using for each Desktop (easy to do with Preview).
All Desktops are using different wallpaper photos, so they are easily recognized by the color scheme, and in the upper left corner is the number.
Regards
Léonie

How to get the index of a h:column element?

Hi!
I'd like to know how to get the index of a <h:column> element.
Here is the code of what I'm trying to do:
<h:column>
     <a:commandLink
          value="#{familyAction.familyDocsByPrj}"
          action="#{homeAction.search(ROW_INDEX)}"
          reRender="rightAppPanel" />
</h:column>When clicking a row, I'd like to make a "search" depending on the selected row.
Does anybode know how to do that?
Thanks a lot :)

Thanks a lot for all your answers! :)
I finally got to do something with my little knowledge =P
I created a new class containing all the data needed for the dataTable (including a "String id").
And that's what I get:
<h:column>
     <a:commandLink
          value="#{familyAction.familyDocsByPrj.name}"
          action="#{homeAction.search(familyAction.familydocsByPrj.id)}"
          reRender="rightAppPanel" />
</h:column>

How to find the recent changes done in the workflow by user id ?

Hello all,
How to find the recent changes done in the workflow by user id ?
I have made changed in Production system .
Like changing the status ,
changing the agent ,
but for these it will , not ask for any request .
So i want to know is there any method to find what are the changes done by me ?
Thanks and regards
Prem

Hi,
This is caused by mandant settings in scc4. It's better not to make changes in PRD, because then your DEV en QA systems differ.
Kind regards, Rob Dielemans

How to hide the Parameter field during Run time?

Hi,
How to hide the Parameter field during Run time?
I have a parameter field which behaves differently depending on the User logged in.
I am using reports 10G
For ex: I have 3 field created in JSP
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user = 'SUPER show all the parameter
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user is 'GATEKEEPER" Just show
PROVIDER
FROM DATE
END DATE
Can I do that?
Please help
Thanks.
KK

hi, i'm not familiar much with JSP. but i think workaround is to create two window one which have 4 fields and the other which have 3. if user is SUPER then call the first screen otherwise if user is GATEKEEPER then call the second screen.

How to rectify the errors occured during session method

how to rectify the errors occured during session method

HI
When the execution of session is completed: we can check the errors via the log.
Rectification of errors depends on the kind of errors. It is not specific that we have to approach the same way to handle all kinds of errors.
Errors can be due to data format, inconsistency due to the configuration, unavailability of master data...
Kind Regards
Eswar

How to Return the Index of a Mouse-Selected Array Element in the View Interface of Diadem

Hello,
Does anybody have an idea of how to obtain the index of a mouse-selected array element in the View interface of Diadem??
Thanks!

Hi Ovidius,
Keep explaining. The only way I know of to trap a selected cell value in VIEW is to embed into the desired VIEW area a second non-modal SUDialog that has a Table control or an XTable control displaying the values of certain data channels. There are callbacks in both table controls for cell selection, and you can configure the table control to allow only single cell selection if that's what you want. The regular table control will be easier to program, but the XTable control will perform much better for larger channels.
But what happens with that value the user selected? Is it used for a calculation? Is it added to a report? Why would the user select that cell in a table rather than selecting the corresponding feature in a graph with the crosshair cursor?
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to identify the DDL changes ?

Hi all,
How to identify the DDL changes done to the database ?
By triggers only Or we can use Logminer also OR
SELECT * FROM USER_OBJECTS where object_type = 'TABLE' order by LAST_DDL_TIME desc;
OR
is there any other options are available ?
Thanks in advance,
Pal

Something from asktom might help
tkyte@TKYTE816> create or replace trigger ddl_trigger
2 after create or alter or drop on SCHEMA
3 declare
4 l_sysevent varchar2(25);
5 l_extra varchar2(4000);
6 begin
7 select ora_sysevent into l_sysevent from dual;
8
9 if ( l_sysevent in ('DROP','CREATE') )
10 then
11 if l_sysevent = 'CREATE'
12 then
13 begin
14 select 'storage ( initial ' || initial_extent ||
15 ' next ' || next_extent || ' .... )'
into l_extra
16 from all_tables
where table_name = ora_dict_obj_name
17 and owner = user;
18 exception
19 when no_data_found then null;
20 end;
21 end if;
22
23 insert into log
24 select ora_sysevent, ora_dict_obj_owner,
25 ora_dict_obj_name, l_extra
26 from dual;
27 elsif ( l_sysevent = 'ALTER' )
28 then
29 insert into log
30 select ora_sysevent, ora_dict_obj_owner,
31 ora_dict_obj_name, sql_text
32 from v$open_cursor
33 where upper(sql_text) like 'ALTER%' ||
34 ora_dict_obj_name || '%'
35 and sid = ( select sid
36 from v$session
37 where audsid=userenv('sessionid') );
38 end if;
39 end;
40 /

How to adopt the index changes during upgrade

Similar Messages

Maybe you are looking for