How to alter the appearance of Notification in Worklist

I am trying to work out how to alter the appearance of the reponse section of a workflow notification accessed via the worklist.
I have set up three options in a Lookup group. They appear as a row of buttons across the bottom. As a contrast in the PO Approval workflow notification Oracle has the Lookup list as a drop down box with the options.
How is this done, where can I find some documentation?
Thanks,
Michael

The number of possible responses (buttons) determines whether buttons are rendered or a pop list is shown
I am trying to work out how to alter the appearance of the reponse section of a workflow notification accessed via the worklist.
I have set up three options in a Lookup group. They appear as a row of buttons across the bottom. As a contrast in the PO Approval workflow notification Oracle has the Lookup list as a drop down box with the options.
How is this done, where can I find some documentation?
Thanks,
Michael

Similar Messages

How to customize the appearance of certain font-families?

How can I change the display of certain font-families? Especially I want to change it for the family "Script" (which can for example be seen [http://en.wikipedia.org/wiki/Font_family_%28HTML%29#Generic_fonts here] ).
I don't know which font is used at the time, but I want to set it to ''Monotype Corsiva''.

The number of possible responses (buttons) determines whether buttons are rendered or a pop list is shown
I am trying to work out how to alter the appearance of the reponse section of a workflow notification accessed via the worklist.
I have set up three options in a Lookup group. They appear as a row of buttons across the bottom. As a contrast in the PO Approval workflow notification Oracle has the Lookup list as a drop down box with the options.
How is this done, where can I find some documentation?
Thanks,
Michael

How to restore the appearance of this message? "Requested an encrypted connection to a page [...] Probability of read data [...] [Optional] Always warn me before [...]" Is disabled by default and now I have it shut off permanently.

Hello!
I have a problem, because when the message appeared:
(original)
"Zabezpieczenia
Zażądano połączenia szyfrowanego ze stroną, która zawiera elementy niezaszyfrowane.
Prawdopodobieństwo odczytania przesyłanych danych przez osoby trzecie jest duże.
[Opcja] Zawsze ostrzegaj przed nawiazaniem połączenia szyfrowanego ze stroną zawierającą elementy niezaszyfrowane."
(in translation)
"Security
Requested an encrypted connection to a page that contains the elements unencrypted.
Probability of read data transmitted by third parties is large.
[Optional] Always warn me before you make an encrypted connection to the page containing the unencrypted parts."
option "Always warn ..." is disabled by default and by chance it shut off permanently.
How to restore the appearance of this message?
Sincerely,
Jadwiga Zabagło

Hello!
I have a problem, because when the message appeared:
(original)
"Zabezpieczenia
Zażądano połączenia szyfrowanego ze stroną, która zawiera elementy niezaszyfrowane.
Prawdopodobieństwo odczytania przesyłanych danych przez osoby trzecie jest duże.
[Opcja] Zawsze ostrzegaj przed nawiazaniem połączenia szyfrowanego ze stroną zawierającą elementy niezaszyfrowane."
(in translation)
"Security
Requested an encrypted connection to a page that contains the elements unencrypted.
Probability of read data transmitted by third parties is large.
[Optional] Always warn me before you make an encrypted connection to the page containing the unencrypted parts."
option "Always warn ..." is disabled by default and by chance it shut off permanently.
How to restore the appearance of this message?
Sincerely,
Jadwiga Zabagło

HELP ME!!!! .nib replaced by other file to alter the appearance.

One of the .nib files was replaced by another file in the loginwindow.bundle folder, in hopes to alter the appearance of the login & boot-up panels. Now I turn on my iBook G4 to recieve the grey screen with the apple logo in the center and the spinning pinwheel, as well. Next, I see the boot-up panel with the blue background. The message it displays while booting-up is Starting Mac OS X. The animated blue bar moves very, very slowly. When it finally reaches the end, it still animates, but will NOT leave that screen. It was suggested to me that I should consider an archive and install.
When I insert the disks that came with my iBook G4 and hold the option key, I see a blue screen with an icon in the center that looks like the Macintosh HD icon only with a blue X at the bottom, right corner of it. Also, I see a curved arrow on the right, and a straight arrow on the left. The right starts it which doesn' work. The left arrow simply reloads the window. When I insert the disk and hold the "C" key, the computer proceeds to start up as it does in my description above.
HELP !!!!!!!!!!!!!!!

I sweeped the hard drive, and rebooted.

How to get the last received notification timestamp when app in background

Hi All,
We are developing the app in windows phone Silverlight 8.1.
We need to show the last received notification time stamp even when the app is in background.
When the app in foreground, I can get the timestamp.
Since we cant write the background task for the Silverlight phone 8.1 app, I don't know how to get the time stamp of the last
notification(toast/livetile/badge) in the app for display.
Can anyone help on this.
Thanks,
Meena

Yes, continuous background execution is not supported but you can use background tasks.
(Continuous background execution in this context refers to the special run state permitted for GPS Navigation apps.)
For information regarding Background Tasks see: Supporting your app with background tasks -
http://msdn.microsoft.com/library/windows/apps/hh977046.aspx
Additional information is available in these topics:
Guidelines for background tasks
PushNotificationTrigger
How to receive raw notifications
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.

How to alter the display names of grouped items in a document library?

Very odd issue I want to sort items in a document library by the value in a field, that is no problem. The issue is I want them display NOT in alphabetical order for example I have a list that is grouped into 3 groups (Cases, Forms and Support). When you
look at the page they are grouped in alphabetical order from top to bottom, I want them to show up as (Cases, Support and Forms). I tried creating column with with a value 1,2 or 3 with the "3" value attached to "Forms" items and the "2"
to the "Support" item them sort per Grouped value and that works BUT the grouped names appears as "1" "2" or "3". I need them to show as (Cases, Support Forms).
I was wondering if there is syntax to alter the display name while editing within Designer similar to the syntax used to change the display name of a long hyperlink when quoting it in an email or forum submission??
I want:
<FieldRef Name= "Grouping"/> to diplay the three groups by names other than the values in that column, the display names.

Hello,
This might be helpful:
http://sharepoint.stackexchange.com/questions/78958/change-header-on-group-by

How to disable the 'Read Only' notification on an Access document when it is opened from within a document library (SP 2010)

Hello,
OK, so I am currently having issues with opening MS Access documents from SP 2010. I have taken an existing database and uploaded it into a document library. Now, when I open this document I get the prompt to open it in either 'Read Only' or 'Edit'.
When I select 'Read Only' I can view the document, however I get the 'Read Only - Save As' notification when the document opens up. I have configured the document both from the source (on the original file) and from within SP to disable notifications - (from
within the Trusted Options selection)
Deleted the document and uploaded it again, and the 'yellow bar' notification is still appearing.
I want to disable the 'Save As' function, or even hide this when the document is opened. Is this at all possible??

Hi Terry,
According to your description, my understanding is that you don’t want the yollow bar notification to display when you open Access documents.
This issue seems to be about the client application. Please compare the followings with the things that you did:
1.Open the documents
2.Click File->Options->Trust Center->Trust Center Settings
3.Click Protected View, unselect ‘Enable Protected View for originating from the Internet’
4.Click Message Bar, select ‘Never show information about blocked content’
5.Click Macro Settings, select ‘Disable all macros without notification’
In addition, as this issue is about Office, I commend you create a new thread in Office forum, more experts will assist you with this issue.
Office forum:
http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Indesign CS5 is automatically altering the appearance of RGB images on the screen?

I am working on the layout for a plant field guide. The photos are all RGB files and when placed into indesign they appear as they should. However on some pages (pages where there are lots of images) the colour automatically appears as if converted to CMYK. This appearance suddenly applys to the whole page and every image displayed. If I drag one of these images which looks terrible in CMYK to the next page it goes back to looking like it does in RGB.
I have tried changing the colour management of the images in Photoshop and Indesign and saving files as every possible format (jpg, png, tiff, psd, pdf etc). Makes no difference.
When I expert the document to pdf for printing - the same thing has occured. The one page - with lots of images - has generated with the appearance of CMYK but the following page with fewer images still has bright colours (same as the RGB original file). When I print this pdf to a CMYK printer the files print as per the pdf - the page with images which appear in CMYK colour format - look dull and are not true to the flowers colours and the other page prints as per the RGB files - perfectly.
Can anyone tell me how I can override this change in Indesign CS5? It seems to have little to do with the colour management of the images and more to do with the percentage of the page which is RGB colour images.
Any help would be much appreciated.

This is the first time I've posted in a help forum. This solved all my problems. Hopefully I didn't offend to many CMYK inks along the way.
You guys are brilliant.
I am a converted friend.
Cheers

How to alter the contrast/brightness/invert/smooth of an image? (beginner)

Hey,
I'm new to image manipulation and processing and have been told to use Java 2d with Image/ImageIO/MediaTracker/BufferedImages already in order to load and save my image, but I just can't find any nice way to learn how I would go about altering at least the brightness and contrast of the image I loaded up into the buffered image tracked by MediaTracker. After this I will be needing to invert and smooth the image then make a histogram, ais there any good tutorial or book to teach me how I woudl go about modifying the pixels within the image because so far I have no idea about what to do for the algorithm or what filter/classes/methods I should be doing from here. Can anyone help me out on how to start manipulating the images? I've seen a few random examples which don't really explain how the things work and I want to understand how to do the algorithms and processing though.

The book Filthy Rich Clients by Chet Haase and Romain Guy does a pretty good job of explaining how to work with images.
Its companion [website |http://filthyrichclients.org/] has links to code samples. Check out chapters 4 and 8 in the Examples section.

How to alter the materialized view defintion with -- For update clause

My db version is 9.2.0.3
My orginal materialized view difination does not have "for update " clause.
how can i alter the mview defination to inclused and exclude the "for update" clause.
I dont want to drop and recreate the mview with for update clause. But I what to change the existing definition.
Please suggest.
Thanks
Naveen.

I already have the view definition in place. I want to change the exising defination, by adding the "for update " clause. Is it possible with any " alter mview ... " syntax.
Below is my existing syntax. I don't what to drop and recreate. Just want to alter the existing definition , with for update clause.
create materialized view test
pctfree 0
tablespace DATA storage (pctincrease 0)
build immediate refresh start with sysdate next (trunc(sysdate+1) +1/24)
with primary key
disable query rewrite
as select * from test@isource;
Please suggest!
Thanks
Naveen
Edited by: user12096071 on Apr 8, 2010 2:56 PM

Altering the appearance of Parallel UUT Dialog

Hi all
I was hoping someone might be able to help answer a TestStand related question. I am in the process of putting together an ATE system. For simplicity and speed of implementation we have decided to use the unmodified parallel process model with callbacks. The system will test up to 3 different types of UUT’s in parallel.
Depending on a user selection (made in the ProcessSetup callback) any combination of the 3 UUT types could be selected to run.
The system functions perfectly but we were hoping there was a simple way of altering the Parallel UUT Dialog to make the final application more intuitive.
Would any of the following be possible without the need to alter Modelsupport2.dll??
Alter the test socket label from 0,1 or 2 to text that would reflect the UUT type being tested in each socket?
Alter the Status Message to reflect the UUT type being tested?
Any other suggestions.
I am running under windows XP, the version of TestStand in use is 3.5. I am programming with LabVIEW 7.1 I have no experience with C, hence altering the Modelsupport2.dll is not a realistic option.
If anyone has any suggestion of how I could make my application more intuitive please respond.
T.I.A
Declan
Attachments:
Parallel UUT Dialog.JPG ‏46 KB

Ray is correct that the changes to modelsupport2 are fairly simple but you would need to buy CVI in order to do this. I have made some of the same changes. I do almost all of my work in LabVIEW but I also have a CVI license so it was no big deal to me. You could consider writing your own parallel dialog in LabVIEW. For the batch model, I needed a different serial number entry and I wrote that in LabVIEW. It was not an entire replacement of modelsupport2. I just did a custom serial number entry VI and a custom results display VI and put them in the PreBatch and PostBatch callbacks. This was all pretty simple and the parallel mode would be more difficult but it could be done.

How to edit the appearance of one instance of a type def (not strict)?

Hello,
I would like to edit the appearance of a control (changes which require using the LV control editor). Unfortunately, this control is an instance of a (non strict) type def. How do I do this, without editing the appearance of the type def itself?
Thanks,
Jaegen

Hi Jaegen, this worked for me...
Open the typedef - don't worry, you aren't going to _save_ changes
Edit typedef as needed
[When done editing] copy connector-pane (select, ctrl-C)
File\Revert !!!
Select target-control and paste!
In LabVIEW 7.1, the edited/pre-reverted ... ouch ... control appears (and still connected to typedef).
Message Edited by Dynamik on 11-16-2005 08:22 PM
Message Edited by Dynamik on 11-16-2005 08:23 PM
Message Edited by Dynamik on 11-16-2005 08:24 PM
When they give imbeciles handicap-parking, I won't have so far to walk!

How to Improve the Appearance of iPad Folders

I have created folders on my iPad each containing apps that are of a similar type (e.g., a folder named "Shopping" contains all of my shopping-related apps such as Amazon, Zappos, Groupon, Yelp). This is very handy, BUT these folders are very UGLY and the description is hard to read against the screen wallpaper.
Is there anyway to improve the appearance of these "Folder Icons"? Even if you could change the color of the font description (from the default white), this would be a big help. Another mobile operating system (Android 4.1.2) does this by displaying the icon of the first app in the folder as the icon for the folder along with the folder Description below the icons. This allows you to use a "representative icon" to remind you visually of the contents. There may be better solutions, but anything would be better than how the existing app folder appear.
If not available, I hope the iOS software engineers will either fix this or create a way for an app developer to create a way to improve the appearance (I couldn't find any app on the Apple Store which can help with app folder appearance).
Any help would be greatly appreciated. Thanks...

To give a suggestion to Apple use http://www.apple.com/feedback/ipad.html

How to alter the alv tree node text?

hi
i want to alter the alv tree node text, many people say it cann't be changed, but
i look into the sample code 'BCALV_TREE_04', the average funtion(select a column and then select average function in the tool bar) can alter the tree node text dynamically.
i try to look into the source code, the it's the sap standard code, all the funtions that user input, it goes to the statement " CALL METHOD cl_gui_cfw=>dispatch.", and i don't understand what this statement do, can someone helps me?

hi
good
The ALV tree report produces uses OBJECT METHOD functionality in-order to produce a
tree structured ALV output.
The creation of an ALVtree report first requires the creation of a simple program to build the ALV
details such as the fieldcatalog and to call a screen which will be used to display the ALVTree.
The screen should be created with a 'custom control' where you wish the ALVtree report to appear.
For the following example it will have the name 'SCREEN_CONTAINER'.
http://www.sapdevelopment.co.uk/reporting/alv/alvtree%5Calvtree_basic.htm
reward point if helpful.
thanks
mrutyun^

How to alter the default profile for multiple users

I am trying to alter the default profile assigned to users during user creation to a new profile. I know to change the profile for one user using the syntax
alter user abc profile profileabc
The issue I have is that there are 100's of users under default profile and changing for each of them manually would be difficult. The approach that I see is to write a shell script where I connect to the db and get a list of all the users with default profile. Then I loop through the file making connection to the db each time and executing the alter statement.
Please help if you think that there can be a more efficient approach to this.
Thanks

alter user abc profile profileabcspool newsql.sql
select 'ALTER USER '|| USERNAME || ' PROFILE NEWPROFILE;' FROM DBA_USERS;
SPOOL OFF
@newsql.sql

How to alter the appearance of Notification in Worklist

Similar Messages

Maybe you are looking for