How To Automatically Split A Large Clip Into Smaller Clips

I captured several one-hour tapes with an older version of Windows Movie Maker.
They are AVI files.
I'd like to work with the footage when I purchase Premiere Pro CS5.5 or CS6.
Each tape is composed of several starts and stops of the record button, so lots of individual clips inside of the hour-long captured footage.
In Premiere Pro CS 5.5, is there a way to automatically split a large clip into smaller clips at the points where I started and stopped the camera?
Any help is greatly appreciated.

Flyingfish,
I cannot tell you that.
Historically, with "consumer" CODEC's, PrE often gets native support, before PrPro.
However, with "professional" CODEC's, such as RED, PrPro has those, but PrE will likely never get them. There are some pro CODEC's, that PrPro does have, that PrE is missing, but I do not have a list.
Good luck, and wish that I had more info for you.
Hunt

Similar Messages

How do I split a large chapter into smaller chapters in IBA?

How do I split a large chapter into smaller chapters in IBA?

Duplicate the long chapter into however many, then delete the pages from each until you have whittled the contents accordingly....you can also paste into a new book if that betters fits your style.

How can I split a pdf file into smaller files using Acrobat XI

How can I split a pdf file into smaller files using Acrobat XI?

Hi laforcej
Open the PDF In Acrobat ...
Go to Tools -> Pages -> Extract
Now Select the Page Number you Want to Extract and Save them

How do I split a large PDF into multiple documents using Acrobat?

Will acrobat split a large document into mulitple documents. Not extract but split. Also can you delte pages with it?

Hi servidone,
You can defintely do this with Adobe Acrobat. Please see this page for details on how to accomplish the tasks you were asking about: https://helpx.adobe.com/acrobat/using/manipulating-deleting-renumbering-pdf-pages.html
-David

Should I split 1 large JAR into smaller JARs?

I'm not sure how to deploy my application. It's composed of about 50 classes and at the moment compiles into one big JAR. Is that how things are done? I was wondering if I should split the application into smaller JARs according to function, as if I have to make a fix to one part, I then just distribute that one smaller file. Is this something that takes a lot of work to modify the code to make it work, or do I just select the classes in Eclipse and create the JARs? Or should I just not bother, and send out one big JAR?
Thanks

Hi There,
First of all, I must tell you that making a 'jar' file an ddeploying that only to the AS will not do...... You gotta make an 'ear' or 'war' that will consist of the 'jar' files and give the 'jar' file in the Classpath....... If you use JNDI fo Database Connection, 'xml's must be written and configured correctly.....
Secondly, a 'jar' file might contain 10 to the power Infinity class files--so, that is not a problem...... make sure that only class files r put into and not anything else like the 'java' files that might make the 'jar' big.....
I think, I answered to your queries...............
Now, if you face problems again, please be more specific in what you want in the forum.........
OK Buddy, Cheers !

How to Turn Long DV video into Smaller Clips to Edit

Hi everyone, I've googled and fiddled around for hours trying to figure out how to splice up my rather long DV file (converted over from a home wedding DVD) to begin editting. I've tried creating markers and then subclipping - but that doesn't seem to work. Nothing happens. Is there an easy way to do this?
How I've been doing it:
Create new project. Then import the DV file. There appears in the browser the 'sequence1' and then the DV file. I grab it into the viewer and then drag it also into the timeline. However, I get a red bar, so I render it. After this, the the canvas displays the timeline video but the viewer video is completely separate. They still play the same DV but not simultaneously. I don't know how to go about clipping this large file so that I can edit each scene separately. How do I splice this long segment into smaller clips that show up in my browser for editting?
Thank you so much for your help!!

Well... I'd suggest you either reconvert that file to a dv codec .mov file, or start again with the dvd file conversion.
You've got to forget everything you knew about imovie. FCP and imovie are built on completely different paradigms. Final cut is a non-destructive editor. No matter WHAT you do in FCP, the actual media clip remains unchanged, just like your father's face a week after you tell him you wrecked the family car.
After you've got your correct .mov file, import it into fcp. Open it in the viewer. Play down until you find the first part you want to use. Press "I" for an in point, play down until you want it to end, then press "O" for out. Then press command U, or go to the modify menu and select Make Subclip.
You'll get a little jagged media icon in your browser window. It makes good sense to name it something more than what fcp names it., so you'll be able to find it again.
I personally don't like to work with subclips. Usually I'll capture in logical chunks. But you can't do that with your one long file. What I do instead of subclipping is to add my select shots into a sequence. Then I'll duplicate the sequence and start working with that- rearranging, deleting etc, until I'm happy.
Hope this is useful.

Make a large image into smaller slices

is there a way of splitting a large image into smaller
sections

wilburforce wrote:
> is there a way of splitting a large image into smaller
sections
Check the help files on slicing. If you mean within the
document window,
use the marquee selection tools.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm

A pdf file failed to convert to word, presumably because of size. how do i split a large pdf file into manageable secrtions?

I'm running Abode Reader XI version 11.0.7. Repeated attempts to convert a large (439 page) file, a dissertation, failed. How do I split a large pdf file like this into manageable sections for conversion?

Hi Mike,
Your 11MB file is well within the file-size limits for ExportPDF, but depending on the number of pages, complexity of the file (and yours doesn't sound complex), and your connection speed, it is possible that the service is simply timing out before it can finish processing. These steps can help:
If the file already contains editable text (that is, it isn't a scanned document), try disabling OCR as outlined in this this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel.
Clear the browser cache and try again.
Try a different browser.
Let's start there. If you still can't export the file to Word, let me know and we'll take it from there.
Best,
Sara

How do I output a large pdf into single pages for press?

How do I output a large pdf into single pages for press?

It is certainly a good point that, if they need the files separately, and don't even know how to use Acrobat to split it themselves, it might lead one to question their expertise in the PDF field.

How do you cut an imovie clip into two clips?

How do you cut an imovie clip into two clips? I have a very long clip from which I want to remove the middle (and keep the beginnin and end).

There are several ways to do this. Here are a couple.
1) Drag the long clip into your project. Drag to select the portion you want to remove. Then right-click/Split Clip. This will give you three clips, the first, the last, and the one in the middle that you want to delete. You can select the middle clip and right-click/Delete Selection.
2) Drag the long clip into your project. Drag to select the frames you want to delete. Then right-click/Delete Selection.

How do I divide a large catalogue into two smaller one on the same computer?

How can I divide a large catalogue into two smaller ones on the same computer? Can I just create a new catalogue and move files and folders from the old one to the new one? I am using PSE 12 in Windows 7.

A quick update....
I copied the folder in ~Library/Mail/V2/Mailboxes that contains all of my local mailboxes over to the same location in the new account. When I go into mail, the entire file structure is there, however it does not let me view (or search) any of the messages. The messages can be accessed through the Finder, though.
I tried to "Rebuild" the local mailboxes, but it didn't seem to do anything. Any advice would be appreciated.
JEG

How can I split an Orders05 iDoc into multiple iDocs?

Hello,
Can one of you experts please tell me how I can split an ORDERS05 iDoc into multiple iDocs based upon Delivery addresses?
For example, if the iDoc contains 3 different Delivery Addresses then I need to split it into 3 iDocs.
It has been suggested to me that I can Create a custom function module. In this custom fm split the idoc into 3 based on the delivery address and create it using the FM MASTER_IDOC_DISTRIBUTE.
Problem is I don't know how to do this. Any help is greatly appreciated. Thanks.
Dan

Hi Dan Avis
Write a Custom Z program .
1 get order05 idoc number....
2 get the segment details...(Based on you condition...)
3 In a loop send the data to the FM MASTER_IDOC_DISTRIBUTE (Based on you condition...)
4 IDOC will generated,,,every loop and
5 Change the status of original idoc .
or
Create Function module and use the FM as process code to create 3 idocs...and processs...new generated idoc and block original idocs...
Call me if you have questions @ 302 290 5677
Thanks
Ramesh

How do I Make a large song into 2 smaller songs?

How do I Make a large song into 2 smaller songs?

the following user tip might be of some help with that:
b noir: Chopping a track into smaller pieces using iTunes

How can I split my Dj mix into separate tracks and export the tracks

How can I split my Dj mix into separate tracks and export the tracks. I'm trying to burn my Dj mix to cd and I don't want it to be one long track.

Henryfrommo wrote:
How can I split my Dj mix into separate tracks and export the tracks.
http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
(Let the page FULLY load. The link to your answer is at the top of your screen)

How do I split up a project into two or more projects?

How do I split up a project into two or more projects?

Select the Images you want to put in the new Project and then run "File➞New➞Project" and check "Move selected items to new project".

How To Automatically Split A Large Clip Into Smaller Clips

Similar Messages

Maybe you are looking for