How to aviod L3 008 message during the TO creation (Technically)

Hi ,
How to skip the L3 008 error message during the TO cration , we have picking strategy user exit is active and we want to skip the L3 008 error message for specific logic in user exit .
We had found FM RV_DELIVERY_PICK_VIEW is helpful but how to  implement at quants level or LIPS table ? .
Please suggest .
Thanks ,
Raghu

Are you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option

Similar Messages

  • Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

    Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

    Hello Fellow iBook Authors!
    Today I received the same error that you all have been discussing.  I tried selecting the DRM
    and this did not work for me, though I'm glad it did for some.  Here's what I did as a work-around. . .
    Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v.  I added an image and extended the length or timing of the image to span the length of the audio file.  Then exported as an .mov.  I then opened QuickTime and opened the file and exported the file to iTunes. 
    You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file.  Does this make sense?  I hope this helps, at least in the short-term.
    Michael Williams

  • Hey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages  it only show imessage and message count )HELP)

    ey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages  it only show imessage and message count )HELP)

    At the bottom of the page Settings > Messages you should have a section headed "SMS/MMS" Turn MMS messaging on then you can turn group message on.

  • After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

    After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
    Tried to run firefox.exe -P but receive error message:
    XML Parsing error: undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line number 18, Column 1:
    <dialog
    ^
    Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

    Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
    Thank you very much again.
    Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
    In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

  • How do I display a message in the message area of a report with SALV?

    Hi,
    How do I display a message at the bottom of the screen of a report (don't know the correct name for the area, but it's the area where error messages normally appear) using the CL_SALV_TABLE object model?
    Is there a method in the object model somewhere that will place some text of my choosing in that area for me?
    I hope I stated that in an understandable way.
    If not, let me know and I'll try again.
    Thanks for your help!
    Andy

    Hi Andrew,
    you can issue an error message to be displayed as an error message:
    MESSAGE ID .. TYPE 'S' NUMBER .. DISPLAY LIKE 'E'
    TYPE 'S' messages are displayed in the status area of the next screen processed, program flow is continued after the message statement. The DISPLAY LIKE 'E' causes the message to be displayed in red color as an error message.
    Regards,
    Clemens

  • I sent a mail to some one by mistake just now. How can I recall a message if the person has not read it yet?

    I sent a mail to some one by mistake just now. How can I recall a message if the person has not read it yet?

    hello sanjaykaul, that won't be possible - once an email leaves your mail server it is no longer under your control.

  • How can you cancel sounds registered during the lessons?

    How can you cancel sounds registered during the lessons?

    In applications, drag the install OSX 10.10.1 to trash. The download will not install unless you tell it to. You can download it without it installing, so trash it if you have decided you don't want it or simply don't tell it to install.
    Cheers
    Pete

  • How do you create a messages account the new macbook air

    how do you create a messages account the new macbook air

    Not possible to create a new mailbox with the iPhone.
    If the account is an IMAP account, you can create additional server stored mailboxes with the email client used on your computer for accessing the account or via webmail access for the account using a browser. Any additional server stored mailboxes created with an IMAP account will be available automatically when checking the account with the iPhone's Mail client, and will be kept synchronized with the server automatically.
    This is not possible with a POP account. You may be able to create additional server stored mailboxes with a POP account via webmail access for the account using a browser, but such mailboxes will not be available with the iPhone's Mail client, or with any email client used to access the account.
    Message was edited by: Allan Sampson

  • How to display the error message during the web dynpro application runtime

    hi,
        I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
        But when i do the same on server-2,there just show something like:
                500   Internal Server Error
                                    SAP NetWeaver Application Server 7.00/Java AS 7.00
                Failed to process request. Please contact your system administrator.
    but the server-1 will stop the j2ee engine. 
    how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
    Appreciate your inputs...
    (Note:server-1 and server-2 have same software version)
    Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

    The Sap-Notes 962319:
    1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
    If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
    If it is undefined, proceed with the next step.
    If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
    2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
    3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
    4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
    a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
    b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
    Always consider restarting the system after making changes on the settings.
    It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
    In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

  • How to add an error message in the application module?

    Hi,
    I have some code running in the application module. I want to display error messages in the messages section of the screen if an error happens in my code.
    How could I achieve this?
    I am using JDeveloper 10G
    Thanks

    Muhammed,
    Have you tried throwing a JboException in your AM code?
    John

  • How can I avoid this message and the crash that follows? -"the program has unexpectedly stopped working and will close"

    I am working on some books that I have had no problem creating in Indesign  and this week, I was doing something and got an error message and had the program crash while I was working on something and lose my unsaved work. It happens all of a sudden and has been frustrating. Thought it was an installation issue, but this also happens on the newest version of CS6.
    The original files (“books”) were created in CS4.
    What I’m doing is copying a template for the appendix that was established in the first book into all subsequent books.
    Here is the process that I used on CS4 for the first 10 books –
    1.       open a file that already has the completed new appendix.
    2.       Open a file that needs the new appendix
    3.       Select the appendix pages from the pages menu in the completed file and “move” them to the new file.
    4.       Voila!
    When I started using CS5 this worked for one book. Now the last book is giving me an error message during step 3. So, I select the pages I want to move and click “move” and then I get a message that says “the program has unexpectedly stopped working and will close”. This is the same message I got with CS6.

    Same problem here. Firefox keeps freezing, sometimes for 5 minutes, then either starts working again really slowly or I get the plug-in error crash. This last time I copied what windows said about the error. This is the info:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: plugin-container.exe
    Application Version: 1.9.2.3814
    Application Timestamp: 4c12b3be
    Fault Module Name: ntdll.dll
    Fault Module Version: 6.0.6002.18005
    Fault Module Timestamp: 49e03821
    Exception Code: c0000005
    Exception Offset: 00048b02
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Additional Information 1: ca4b
    Additional Information 2: 0db6cc4f646c2246ddf8a462e3add7af
    Additional Information 3: 5b21
    Additional Information 4: e5b7e758762c24b02e09abea0b4585f4
    Don't know what it means or if it will help solve the issue, but thought I would share it.
    All I know is that I am about to do something I never thought I would, switch to Chrome.

  • How do I view a message in the reading pane without first having to open the message?

    On my previous e-mail system, I was able to read the text of an incoming message in the reading pane below the selection of incoming messages without first having to open the incoming message about which I was curious. This had the advantage of allowing me to review and delete messages that appeared to be suspicious to me without first opening them and exposing my computer to the danger of an incoming & unwanted virus, etc. I am not able to do this with the new e-mail system and I an unable to find instructions on how to do this with your "Help" inquiry. Does Firefox have this capability? If so, how do I access it?

    Firefox has no email features, it is just a web browser.
    If you are using a web based email service such as Gmail or Hotmail, you will need to contact the support for the email service to see if they offer the feature that you want. Any email features will be part of the web based email service.

  • Warning message during the settlement of WBSE

    Hi,
    We have PS structure. During the settlement cost booked in WBSE moves to AUC & from AUC to final asset.
    While settling the cost from AUC to Final asset, I am getting the warning message " Asset Value date earlier that Asset Capitalization date". If I am still continues then settlement for the that WBSE will be done.
    Now what are the impact of this warning mesage to WBSE settlement, Depreciation run & its value calculation.
    Please advice whether I should continue this type of settlement or do some rectifications..
    Thanks & Reagrds,
    Pradip

    When you do the settlement to your final asset you can fill in the Asset Value date (right part of the screen).
    This date is used to derivate the  capitalization date  and then the depreciation start date (it is possible to fill this in  manual, or to change it manual in the asset TC AS02)
    You have to look in the in the asset what is in and what is the reason of the message TC AS03

  • How to display a confirmation message to the second stage approver.

    Hi,
    I am working on an application which involves 2 stages of serial approvals. After the first stage approval, the request is forwarded to the second stage. When the second stage approver approves the request, the workflow proceeds with the user creation. I would like to let the second stage approver know about the status of user creation after he clicks the approve button. It can be just a simple message saying that the user creation has been successful or unsuccessful.
    My question is how is it possible to show this confirmation message to the second stage approver after the user creation process?
    I tried to use manual action. But it is not working(probably because the owner of the workflow is different from the second stage approver). Is there any other way to implement this?
    thanks,
    manoj.

    It is really simple to implement, you have to just write another manual action to second supervisor after user creation and pass the result to manual action.
    Hoping you are tried to create simple user with out assigning so many resources otherwise it will take time to load.
    Please let me know if you face any issue to implement.

  • Error message during the installation of assembly, refer to help and support for more information: HRESULT :0x80070BC9

    I am trying to download iTunes for my ipod touch. Everytime I start the installation proccess I get this error message
    An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32".version="8.0.50727.4053",publicKeyToken="1fc8b 3b 9a1e 8b 3b", processorArchitecture="amd64"'. Please refer to Help and Support for more information. HRESULT: 0x80070BC9
    after this error pops up and I click ok the installer back tracks then installs.. my ipod cannot connect with the iTunes that is installed it says I need to uninstall and install iTunes with 64 bit..
    I've tried this 3 times and get the same result.. please help ! thanks

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80070BC9, or some other number? (If they're another number, what number are you getting?)

Maybe you are looking for

  • ITunes 7.7, Windows Vista, 80GB iPod classic issues...

    Since installing iTunes 7.7, I have been unable to anything with it. When I connect my iPod, it freezes iTunes, and subsequently the rest of my system. At one point, iTunes recognised my iPod, but told me that I had to reset it to factory settings. W

  • _10.7 push install failed, and fubar'd everything

    Just got a push notice to update to 10.7 (from 10.6.??).  I acked the message, and after a zillion minutes, got an error message that the install failed, and that I need to do download only and manually install.  So, I tried that.  Failed with-- "The

  • Abap proxy to JDBC call

    The scenario is Sender is ABAP proxy and receiver side is JDBC adapter. While creating Purchase order(PO) in SAP, interface should be triggered and it should go and fetch the tax amount from a external Database(DB) and return the tax amount to SAP. P

  • HT3775 How can I get a youtube video that I have stored on a flash drive to play?

    How can I get a youtube video that I have stored on my flashdrive to play?  I have tried to open it with quicktime but it still will not open.

  • Move Tool problem (i think)

    When selecting an object and you want to move it, say 10mm up and 10mm down, how come on CS5.1 to move the object up, it needs to be a minus i.e -10mm to go up!!! Previous versions have been "normal". Any idea's anyone. PS Hello, im new to this forum