How to avoid 'duplicate data record' error message when loading master data
Dear Experts
We have a custom extractor on table CSKS called ZCOSTCENTER_ATTR. The settings of this datasource are the same as the settings of 0COSTCENTER_ATTR. The problem is that when loading to BW it seems that validity (DATEFROM and DATETO) is not taken into account. If there is a cost center with several entries having different validity, I get this duplicate data record error. There is no error when loading 0COSTCENTER_ATTR.
Enhancing 0COSTCENTER_ATTR to have one datasource instead of two is not an option.
I know that you can set ignore duplicates in the infopackage, but that is not a nice solution. 0COSTCENTER_ATTR can run without this!
Is there a trick you know to tell the system that the date fields are also part of the key??
Thank you for your help
Peter
Alessandro - ZCOSTCENTER_ATTR is loading 0COSTCENTER, just like 0COSTCENTER_ATTR.
Siggi - I don't have the error message described in the note.
"There are duplicates of the data record 2 & with the key 'NO010000122077 &' for characteristic 0COSTCENTER &."
In PSA the records are marked red with the same message (MSG no 191).
As you see the key does not contain the date when the record is valid. How do I add it? How is it working for 0COSTCENTER_ATTR with the same records? Is it done on the R/3 or on the BW side?
Thanks
Peter
Similar Messages
-
"****Error from PSA****" error message when loading InfoCube
Hi all,
I am getting the following error message when loading transaction data to an InfoCube.
***Error from PSA***
This is not MD or Hierarchies (like previous messages in the forum)
Please advise.
Thanks,
MikiHi Miki,
Before just loading data into the infocube. Catchup PSA table and see the data into it.
Then u may find the solution.
But as ronald said this shouldnot be the complete error statement.
bye. -
Error 3 when loading external data
Hi Gurus!!
I am trying to load data from a flat file into a Cube. The load is done by a process chain and have worked perfectly before. The file is located on the application server.
Now I get the following error:
Cannot Update Request REQU_DESUFKD2XA1LDREQ0KEJZ2TJC in Data Target
Error 3 when loading external data
The file looks ok when i compare it with the ones i received earlier.
Any ideas what this error 3 is all about?
Thanks in advance!
PontusHi
I Have had trouble raching the network for some time.
Problem solved. My misstake, It was the cube that were set to transactional.....
I will credit A.H.P.
Thanks everyone!
Regards
Pontus -
'Error occurred when deleting master data (RSDMD118)'
Helo Gurus,
When I tried to delete master data prior to the reload, its giving an error message 'Error occurred when deleting master data'. RSDMD 118.
We are currently working in BW 3.1. We checked for SAP notes for the same. But not Able to find any. So please help me to sort it out the problem as early as possible.Hi Mathew,
Are you sure that those master data are not used in any infoproviders? As far as I know you cannot delete master data if that is used in infocubes or DSOs.
You can also try transaction SLG1 with:
Object = RSDMD
Subobject = MD_DEL
and click on "Execute", this might give you the reason why data cannot be deleted.
Regards,
Csaba -
"Error occurs when loading transaction data from other model" - BW loading into BPC
Hi Experts,
I'm having a problem with my data loading from BW, using the standard Load InfoProvider Selections data manager package.
If I run for a period without data it succeeds (with warning) but if there is data to be extracted I get the following error:
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other model
model: AIACONS. Package status: ERROR
As it runs ok when there isn't data it appears there is something preventing the movements of data out of the cube itself, rather then a validation issue.
Has anyone encountered similar or have any ideas as to the problem?
Best,
ChrisHi Vadim,
It's not specific to the transformation file as I have tried with others for the same BW cube and get the same result.
We get a warning when we try and validate the transformation file:
"Error occurs when loading transaction data from other model".
This only appears in the validation pop up and doesn't throw up any warnings about the transformation file itself. The validation log says:
Validate and Process Transformation File Log
Log creation time
3/7/2014 16:09
The result of validation of the
conversion file
SUCCESS
The result of validation of the
conversion file with the data file
FAIL
Validation Result
Validation Option
ValidateRecords = NO
Message
Error occurs when loading transaction data from other model
Reject List
I can't find any errors anywhere else.
Best,
Chris -
Error 1 when loading external data
Hi BW( Best and Wise) friends,
I am not able to load data into my infocube. My source system is a PC file.
Message <b>"Error 1 when loading external data is displayed."</b> when scheduled.
When I checked the error details using Monitor button,
During extraction, the data request was arranged(indicated by green mark),but there was error in <b>data request(red).</b>
During extraction,data request was received (green),but there was some error in <b>data selection(red).</b>
Anticipating good solution.HI all,
1.The flatfile matches with the transfer structure
2.The file is a .csv format file only.
3.The path is correct
I had chosen comma as my data separator.
I had declared fields in the following way in the XL csv file
Name of the candidate text
Name of the party- text
Age-number
Number of votes gained number
Calendar day text.
I had already tried the following.
When I clicked the preview in the external data tab of the infopackage, a window showing the preview parameters is opening. When I clicked the tickmark, message error 1 when loading data is displayed.
4. The details tab of the monitor showed the following:
Overall status : Errors occurred: or: Missing messages-red
4.1)Requests(messages):Errors occurred-red
Data request arranged-green
Error in datarequest-red
4.2)Extraction(messages):Errors occurred-red
Data request received-green
Error occurred in data selection-red
4.3)Transfer(IDocs and TRFC):Everything ok-green
Info IDoc 1: Application document posted-green
Info IDoc 2: Application document posted-green
4.4)Processing(data packet): No data-yellow
I had initiated the discussion in the forum with this information only.
Regards,
Balaji
Message was edited by: balaji vijayakumar -
Error occurs when loading transaction data from other cube
Hi Gurus,
I'm currently working on a Transformation File for loading Transactional Data from BW to BPC but a error message is displayed "Error occurs when loading transaction data from other cube". I have already checked permissions for my user, double checked my transformation file and the dimensions, made all conversion files needed and the message has not changed.
Can anybody help me to solve this problem?!
Thanks a lot & Best Regards,
HHHi,
Here, the Transformation File & Conversion File. I have already tested both with another different InfoCube and they work but no for the one needed.
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
Category=*NEWCOL(ACTUAL)
P_0BASE_UOM=0BASE_UOM
P_0BUS_AREA=0BUS_AREA
P_0COSTCENTER=0COSTCENTER
P_0FUNDS_CTR=*NEWCOL(null)
P_0GL_ACCOUNT=0ACCOUNT
P_0LOC_CURRCY=*NEWCOL(MXN)
P_0MATL_TYPE=*NEWCOL(null)
P_0VENDOR=0VENDOR
P_DataSrc=*NEWCOL(UPLOAD)
P_ZMATERIAL1=0MATERIAL
P_ZMATERIAL2=*NEWCOL(null)
P_ZMATL_CLASS=*NEWCOL(null)
P_ZMATL_TESP=*NEWCOL(null)
P_ZRATIO=*NEWCOL(KF_inpmdInt)
Time=0CALMONTH
SIGNEDDATA=0TOTALSTCK
*CONVERSION
Time=Time_conv.xls
EXTERNAL INTERNAL
201101 2011.JAN
201102 2011.FEB
201103 2011.MAR
201104 2011.APR
201105 2011.MAY
201106 2011.JUN
201107 2011.JUL
201108 2011.AUG
201109 2011.SEP
201110 2011.OCT
201111 2011.NOV
201112 2011.DEC
Thank you for taking at glance to the files.
Best Regards,
HH -
I cannot open firefox at all. I have removed and re-installed but it has made no differenct. I just get an error message when loading firefox - as follows - 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program.
Can anyone help me sort this out? If I log in as someone else Firefox works?
== This happened ==
Every time Firefox opened
== the computer shut down unexpectedly ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)You can o a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]] -
Error occurs when loading transaction data from other model
Hello Experts, I am trying to validate my transformation file and I can see peculiar behaviour of the transformation file. Even though the transformation file is not complete/ complete with all the mappings, i am getting the same error as above.
I can see options, mapping and conversion sections are validating successfully and throwing the above error.
Incomplete Transformation File
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 10
ROUNDAMOUNT=
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
Validating the transformation files
Validating options...
Validation of options was successful.
Validating mappings...
Validation of mappings was successful.
Validating conversions...
Validation of the conversion was successful
Creating the transformation xml file. Please wait...
Transformation xml file has been saved successfully.
Begin validate transformation file with data file...
[Start test transformation file]
Validate has successfully completed
ValidateRecords = YES
Error occurs when loading transaction data from other model
Validation with data file failed
I am getting the same error with complete transformation file also. Please let me know where I am doing the mistake or is it a system error?
Thanking you
PraveenHi,
By
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
you want CUSTOMER to receive a fixed string "NO_CUST"?
If so use,
*MAPPING
CUSTOMER = *STR (NO_CUST) -
Error 4 when loading external data
hi all,
I have unchecked uncheck currency conversion for external systems in my info package and then loaded the data from a flat file.
and then i am getting the below errors.
cost -> cannot be converted to currenecy (since cost contains currency item)
netval_inv -> cannot be converted to currenecy (since cost contains currency item)
/bic/zntwthpm -> cannot be converted to currenecy (since cost contains currency item).
if i check the option
currency conversion for external systems in my info package
then i am getting error 4 when loading external data.
Can anyone help me out!!!
thanxs
harithaHi haritha,
Please check whether your file whcih you are loading is open , when you are starting the Infopackage.
Also please check this SAP Note 600246 - RSAR 234: Error 4 when you load external data.
What is your BW System (Version/Patch)
Thanks.
CK -
Error message when loading BALTB record
I am receiving the following error message when trying to load the BALTB record.
<b>Unexpected record type.</b>
<i>Key of data record which caused termination:
Client = ,
Company Code = 1000,
Asset Class = 153000,
Old main number = 99948,
Old subnumber = ,
Transaction = AS91,
Record type = B . </i>
I have search the forum for answers but I can't seem to find any resolutions. Has anybody encountered this problem and were you able to correct it?
thank you in advance for the help.BALTB seems to be a structure , can you explain how you r trying to loadd
The error may be the Record type B is invalid , the last field is record type , chk whether B exists or not -
Error message when using Spry Data set with XML
Hi,
I have what i see as a big problem, might just be me being
dumm, but here we go.
When I try to use the feature of spry XML Data Set and insert
spry table I get error message when trying it in IE 7.
There are even a problem when I use fireworks automated slide
show function, where you can choose to use the Spry/XML gallery
feature.
The error message I get everytime (incl the auto gallery in
fireworks) is:
The tag: "html" doesn't have an attribute: "xmlns:spry" in
currently active versions.[XHTML 1.0 transitional]
The tag: "div" doesn't have an attribute: "spry:region" in
currently active versions.[XHTML 1.0 transitional]
The tag: "th" doesn't have an attribute: "spry:sort" in
currently active versions.[XHTML 1.0 transitional]
and so on.
What´s wrong?!Hello barvid,
Ok, let's take each problem step by step:
1. The first error you see in the browser: " Exception while
loading ..." normally appears when you try to load files that are
not permitted by the browser security model. This means the XML
file you try to load is located on a different server than your
HTML which is not allowed. The browser is not permitting to load
any files that are not in the same domain as the current page
because of the complex security risks. You'll have to either get
the XML file from its original location and save it in your website
or use a proxy on your web server that should request that file
from the external server and send it to the browser as an XML from
the same domain as the HTML origin.
1.2 The "Exception while loading ..." error you see is a
generic error and my previous advise is based on my experience. In
case this is not your scenario you'll have to open the SpryData.js
and around line 112 you'll see the following code:
Spry.Debug.reportError("Exception caught while loading " +
url + ": " + e);
Please change this line with the following line of code:
Spry.Debug.reportError("Exception caught while loading " +
url + ": " + (e.message?e.message:e));
to obtain a more verbose error message that may clarify the
reasons of your errors.
2. The problems you describe are not browser errors but they
are w3c validation errors. At this point the XHTML standard allows
every application that define custom namespace attributes to also
link a DTD to the page so the page to continue to be valid.
Unfortunately at this point this feature is not correctly supported
by the FF and IE so we wrote an articles about how you should
link
the Spry DTD to your page so the validator understand the
custom attributes Spry use. You'll find inside the full description
of the problems and all the technical details you'll need to know
to solve this issue.
Regards,
Cristian -
Error message when changing personal data
Whenever a user tries to change personal data in ESS, the system returns an error message "Start date should be after 12.01.2012 or later." (or whatever the current day is...)
I can't find a note or whatsoever to solve it. Is this a known error in ESS?You have implemented the BADI HRXSS_PER_BEGDA which results in this error
ESS scenario's will allow data creation/modification starting
from a Default Start Date. By default this Default Start Date
is set to Today's date. To further explain, when the Default
Start Date is set to Today's date ESS User can create or
change a data record valid starting from Today's date
or future date.
It is possible to customize this behaviour. Business Add-in
HRXSS_PER_BEGDA is available. Parameters like molga, pernr,
infty, subty and begda can be used in different combinations
for customization. For further informatio, please
refer to IMG:
Personnel Management -> Employee Self-service -> Own Data ->
Change Default Start Date.
Check your use case subtypes as well -
I am getting this error message when trying to burn a DVD: The disc can’t be burned, because the device failed to calibrate the laser power level for this media. iMac, Mac OS X 10.6.8 Memorex DVD-R 12x Any ideas?
First, try a different batch of recordable DVDs. If you still have problems, you may want to make an appointment at the genius bar and have it checked. The drive may be failing.
-
Canon HF G10 Camcorder - "Cannot Record" error message when trying to make new recordings
Hi All,
I purchased Canon HF G10 camcorder 6 months ago and suddenly I am getting a "Cannot Record" error message each time I press the record button - it simply stopped working and I am puzzled about this - has anyone else faced this problem? if yes, were you able to resolve it? Any insights or torubleshooting guidance will be greatly appreciated.
Best regards,
Rajiv Arora.ra33,
I am very glad to help you with this.
According to the specifications in the user manual, this model records to the internal memory by default in any shooting mode. You can manually select to record to the SD cards, but only in the Manual or Cinema modes. If you are shooting in Auto, clearing out some of the internal memory should stop the "Cannot Record" message from appearing.
If there is anything else I can help you with, please let me know.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Maybe you are looking for
-
How to call a servlet from another servlet
hi everybody, i have a problem, i have to call one servlet from another one. Everything works on my pc, but when i install the application on the customer's server i got an error about an Uknown URL followed by the name of the machine. Wjat i do is t
-
Verizon's WhiteList of email senders won't work unless you know who they are blocking
I have Verizon FIOS with a POP3 email account, which is configured on several PCs and my smartphone. Monday I contacted support by phone about lost incoming emails on all the systems. Four of them were emails that I bcc'ed to myself earlier that day
-
FILE SENDER COMMUNICATION CHANNEL DOESN'T GET FILE
Hi, I have create a new sender communication channel with ftp file configuration. Server parameter and source directory are correct. I have also checked file and directory permission (chmod 777) Poll interval is 600 secs. There is no error in communi
-
Beim Foto Downloaden wird Canon RAW nicht kopiert
wenn ich mit dem, im Photoshop Elements 4.0 eingebauten Foto-Downloader über den USB-Anschluss die Fotos runterkopiere, so werden nur die *.JPG auf den Computer kopiert aber nicht die *.CR2-RAW Files die von der Canon 350D produziert werden. Ich habe
-
Hi! I've started making a website entirely with adobe Edge animate, it's not finished yet but anyone can view the progression so far at http://ayar.be If anyone is interested on having a look at the source files I'll be glad to share them. Any advice