How to avoid max number of column alv grid (kkblo_header).
Hi,
I need display more than 100 columns in alv grid. How can I do this? In structure kkblo_header is max. 100 col.
Thanks, zd.
Hi Zdenek,
Have you tried to create a structure (via SE11 transaction) and assign it as the base structure to form the field catalog for your ALV Report?
I hope I had helped you.
Regards,
Daniel Carvalho.
Similar Messages
-
How to find the number of columns in an internal table DYNAMICALLY ?
Hi,
How to find the number of columns in an internal table DYNAMICALLY ?
Thanks and Regards,
saleem.Hi,
you can find the number of columns and their order using
the <b>'REUSE_ALV_FIELDCATALOG_MERGE'</b>
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = sy-repid
I_INTERNAL_TABNAME = 'ITAB'
I_INCLNAME = sy-repid
changing
ct_fieldcat = IT_FIELDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif
now describe your fieldcat . and find no of columns.
and their order also..
regards
vijay -
Max number of columns in a Webi report
In a worst-case scenario test, I requested about 1700 columns in a Webi report, but only a little more than 300 appeared in the SQL; a TOAD request for the same 1700 columns was successful. Is there an upper limit for the number of objects that can appear in a Webi report? Is there a parameter that could increase the limit?
My eyes read the first half and my brian assumed the second half.
I dont think there is a limitaion on the number of objects that a WebI report can pull.
The only limitation I know of is the maximum number of column that you can display in the report panel; the max number is 100,000.
With the limit on the max number of column diplay in a WebI report can be translated into the max number of columns in the query panel.
This setting is in CMC> Applications>Web Intelligence-->Quick Display mode -
Planning Layout error K9162 - max number of columns in planning layout rest
Hello collegues,
our client would like to have 34 columns in planning layout costs activity inputs of TA KP67. But error message K9162 - max. number of columns is restricted to 30. So I tried to switch of the message with TA OBA5 application area K9 - msg number 162. But this does not work as the error comes up again even though the message is switched off.
Do you have some ideas?
Thanks and regards,
ChristianHello,
thanks for your response. I have maintaine in OBMSG:
K9 162 WE E switch off selected
then in OBA5 for dialog and batch I have maintained -
but the error is upcoming again. So I think that this sort of message cannot be switched off as the planning layout is restricted to 30 columns by design maybe?
thanks and regards,
Christian -
What's the max number of columns a table can have on 32 bit OS & 64 bit OS
What is the max number of columns a table can have on 32 bit OS & 64 bit OS ?
Edited by: sameer naik on 02-Jul-2010 02:11For TimesTen 7.0 and 11.2.1 releases the limit on the number of columns per table is 1000 for both 32 and 64 bit TimesTen. This can be found in the documentation under System Limits.
Regards,
Chris -
How to get Grand Total Text in ALV GRID
Hi Folks,
I am able to get the SUBTOTAL TEXT .....But i need...
How to get Grand Total Text in ALV GRID Display...
Can any one give a Solution for this...Hi Surendar,
Check out this code.. this is showing Total Text in Toal line in the very first column.
REPORT zsales_ord_det_1 .
TABLES: ztable_10.
TYPE-POOLS: slis.
DATA: BEGIN OF it OCCURS 0,
srno(6) type c,
name LIKE ztable_10-name,
age LIKE ztable_10-age,
END OF it.
DATA : BEGIN OF it_temp OCCURS 0,
name LIKE ztable_10-name,
age LIKE ztable_10-age,
END OF it_temp.
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat TYPE slis_fieldcat_alv.
DATA: v_repid LIKE sy-repid,
i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
gs_layout TYPE slis_layout_alv,
gd_layout TYPE slis_layout_alv,
i_sort TYPE STANDARD TABLE OF slis_sortinfo_alv,
wa_sort TYPE slis_sortinfo_alv.
START-OF-SELECTION.
v_repid = sy-repid.
SELECT * FROM ztable_10 INTO TABLE it_temp.
LOOP AT it_temp .
it-srno = 'Total'.
it-name = it_temp-name.
it-age = it_temp-age.
APPEND it.
ENDLOOP.
END-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = v_repid
i_internal_tabname = 'IT'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = v_repid
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = i_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
wa_fieldcat-row_pos = 1.
wa_fieldcat-col_pos = 1.
wa_fieldcat-fieldname = 'SRNO'.
wa_fieldcat-tabname = it.
append wa_fieldcat to i_fieldcat.
LOOP AT i_fieldcat INTO wa_fieldcat.
IF wa_fieldcat-fieldname = 'AGE'.
wa_fieldcat-do_sum = 'X'.
MODIFY i_fieldcat FROM wa_fieldcat.
ENDIF.
IF wa_fieldcat-fieldname = 'SRNO'.
Hide this field so that it can display it's content i.e.
Total text in Subtotal level
wa_fieldcat-tech = 'X'.
wa_fieldcat-no_out = 'X'.
MODIFY i_fieldcat FROM wa_fieldcat TRANSPORTING tech no_out.
ENDIF.
ENDLOOP.
wa_sort-spos = 1.
wa_sort-fieldname = 'SRNO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort.
gd_layout-no_totalline = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
is_layout = gd_layout
it_fieldcat = i_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = i_sort
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Regards,
Seema -
How to identify the modified rows in ALV grid in OO
Hello All,
I have strange problem and i don't know how to solve it?
I have ALV grid and in that ALV grid i have two buttons 'CONT' and 'ALLOC', when the user press 'ALLOC' button i will give a popup to make the user to enter some value.
After entering the value i will do some calicualtions and i will distribute the amount in the fields of ALV grid and i should update the ALVGRID.
Normally we can use CALL METHOD ME->REFRESH_TABLE_DISPLAY.( I have already checked by using this method and it worked fine)
Here is the way my program look like
ALVTREE1
ALVTREE2
|----
ALVGRID
The problem is when i press the other button CONT i am unable to know what values exist in ALVGRID.
How can i find these distributed amount in ALV?
I hope i am clear while explaining problem.
Here is the required code:
method handle_user_command.
data: lt_fields type table of sval,
ls_field type sval,
ls_fieldcatalog type lvc_s_fcat,
ls_merkpl type zvhf_merkpl,
lv_month(2) type n ,
lv_year(4) type n ,
lv_spmon type zvhf_allocation-spmon,
lv_value type p.
field-symbols: <fs> type any,
<ls_merkpl> type zvhf_merkpl.
case e_ucomm.
when 'CNT'.
call method gcl_gui_alv_grid->check_changed_data.
call method dailogbox_container->set_visible
exporting
visible = space.
call method gcl_gui_alv_tree2->frontend_update.
call method gcl_gui_alv_tree2->update_calculations.
clear: gt_merkpl.
when 'ALCT'.
Popup to get the values enterd by the user
ls_field-tabname = 'DD02V'.
ls_field-fieldname = 'DDTEXT'.
append ls_field to lt_fields.
call function 'POPUP_GET_VALUES'
exporting
popup_title = 'Enter value'
start_column = '1'
start_row = '1'
tables
fields = lt_fields
exceptions
error_in_fields = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
elseif sy-subrc = 0.
read table lt_fields into ls_field index 1.
if sy-subrc = 0.
gv_value = ls_field-value.
Read the table zvhf_allocation with nodekey in order to get percentages
select * from zvhf_allocation into table gt_allocation
where dvkbur = gs_node_info-nodename.
Read gt_merkpl in order to get existing line in ALV grid
loop at gt_merkpl into ls_merkpl.
*Read FCAT inorder to find the field and move proprtinate value
loop at gt_fieldcatlog3 into ls_fieldcatalog.
*Split is required to match ZVHF_ALLOCATION-SPMON with screen text and to proprtinate the value
split ls_fieldcatalog-scrtext_l at '.' into
lv_month lv_year.
concatenate lv_year lv_month into lv_spmon.
Check whether an entry exist or not in ZVHF_allocation
read table gt_allocation into gs_allocation
with key spmon = lv_spmon binary search.
*If an entry exist proprtinate the value as enterd in table
if sy-subrc = 0.
lv_value = gv_value * gs_allocation-prozent.
lv_value = lv_value / 100.
perform assign_value using ls_fieldcatalog-fieldname lv_value
changing ls_merkpl.
modify gt_merkpl from ls_merkpl.
endif.
endloop.
CALL METHOD gcl_gui_alv_grid->frontend_update.
call method gcl_gui_alv_grid->refresh_table_display
exceptions
finished = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endloop.
endif.
endif.
endcase.
endmethod. "handle_user_command
If you have any further questions please let me know.
Regards,
LisaHello Vijay,
Thanks for you reply,
The event data_changed is not working because i called method refresh_table_display. So the event changed will not be raised after i press button CONT
If i didn't call this method then i can see the value enterd by the user in ALV grid.
So, do you have an more ideas.
Regards,
Lisa -
How to find the selected item in alv grid or table control
can any one tell me please
how to find the selected item in alv grid or table controlIn table control, If you goto screen painter and goto table control properties ( f2 ), there is one check-box w/selColumn check that and give column name. Then add that column to your internal table.
IN PAI
LOOP AT it_tkhdr.
FIELD it_tkhdr-sel_row
MODULE tab_tkhdr_mark ON REQUEST.
ENDLOOP.
MODULE tab_tkhdr_mark INPUT.
MODIFY it_tkhdr INDEX tc_tkhdr-current_line.
ENDMODULE. " tab_tkhdr_mark INPUT
here it_TKHDR is internal table sel_row is field for selection
After that, you can loop at it_tkhdr where sel_row is 'X' to get selected rows.
regards,
Gagan -
How to trigger top-of-page in ALV Grid
How to trigger Top-Of-Page in ALV Grid...
can any one plese send the sample code...
thanks.here is sample code. try this. u need to build an internal table and then call function commentary write and pass that internal table.
*& Form TOP_OF_PAGE
Top_of_page
FORM top-of-page. "#EC CALLED
*ALV Header declarations
DATA: lit_header TYPE slis_t_listheader,
lwa_header TYPE slis_listheader.
Title
lwa_header-typ = 'H'.
lwa_header-info = text-013.
APPEND lwa_header TO lit_header.
CLEAR lwa_header.
BOM Number
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = p_matnr
IMPORTING
output = gv_matnr.
Pass BOM number
lwa_header-typ = 'S'.
lwa_header-key = text-014.
lwa_header-info = gv_matnr .
APPEND lwa_header TO lit_header.
CLEAR: lwa_header ,
gv_matnr .
BOM description
lwa_header-typ = 'S'.
lwa_header-key = text-015 .
lwa_header-info = gv_maktx .
APPEND lwa_header TO lit_header.
CLEAR: lwa_header.
start/end date format MM/DD/YY
lwa_header-typ = 'S'.
lwa_header-key = text-016 .
CONCATENATE s_erdat-low+4(2) '/'
s_erdat-low+6(2) '/'
s_erdat-low(4) ' - '
s_erdat-high+4(2) '/'
s_erdat-high+6(2) '/'
s_erdat-high(4)
INTO lwa_header-info.
APPEND lwa_header TO lit_header.
CLEAR: lwa_header.
Run Date of Report format MM/DD/YY
lwa_header-typ = 'S'.
lwa_header-key = text-017 .
CONCATENATE sy-datum+4(2) '/'
sy-datum+6(2) '/'
sy-datum(4) INTO lwa_header-info .
APPEND lwa_header TO lit_header.
CLEAR: lwa_header.
call function REUSE_ALV_COMMENTARY_WRITE to use TOP_OF_PAGE event.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = lit_header.
ENDFORM . " FORM top-of-page. -
Urgent : how to select the rows in the ALV Grid Control
How to select the rows in the ALV Grid control,
I am facing the situation where i need to select the row/rows in the Grid control and then to lock the entries,
If anyone have the solution please help me out
<b>Its very Urgent</b>Hi Bharath,
Go through this hope u can understand.
SEL_MODE. Selection mode, determines how rows can be selected. Can have the following values:
A Multiple columns, multiple rows with selection buttons.
B Simple selection, listbox, Single row/column
C Multiple rows without buttons
D Multiple rows with buttons and select all ICON
Setting and getting selected rows (Columns) and read line contents
You can read which rows of the grid that has been selected, and dynamic select rows of the grid using methods get_selected_rows and set_selected_rows. There are similar methods for columns.
Note that the grid table always has the rows in the same sequence as displayed in the grid, thus you can use the index of the selected row(s) to read the information in the rows from the table. In the examples below the grid table is named gi_sflight.
Data declaration:
DATA:
Internal table for indexes of selected rows
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
Example 1: Reading index of selected row(s) and using it to read the grid table
CALL METHOD go_grid->get_selected_rows
IMPORTING
et_index_rows = gi_index_rows.
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a valid line'.
EXIT.
ENDIF.
LOOP AT gi_index_rows INTO g_selected_row.
READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
ENDIF.
ENDLOOP.
Example 2: Set selected row(s).
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
CALL METHOD go_grid->set_selected_rows
exporting
it_index_rows = gi_index_rows.
ENDIF.
Reward points if helpful.
Thanks
Naveen khan -
How can I add a new column to Grid view under Tests tab
I understand in "ORACLE Test manager for web Applications", the Grid view under Tests tab should be customised.
How can I add a new column to Grid view under Tests tab? Thanks KatherineI don't think this is possible.
Regards,
Jamie -
How to display an image in an alv grid in each corresponding row?
Hi,
please tell me how to display an image in an alv grid in each corresponding row, like;;
tony 23 newyork <image>
Mkitharyan 63 washington <image>
NOT BY HOTSPOTS/URL.you can put image in each cell you want:
data lo_cmp_usage type ref to if_wd_component_usage.
lo_cmp_usage = wd_this->wd_cpuse_alv( ).
if lo_cmp_usage->has_active_component( ) is initial.
lo_cmp_usage->create_component( ).
endif.
DATA lo_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
lo_INTERFACECONTROLLER = wd_this->wd_cpifc_alv( ).
DATA lo_value TYPE ref to cl_salv_wd_config_table.
lo_value = lo_interfacecontroller->get_model( ).
data col type ref to CL_SALV_WD_COLUMN.
col = lo_value->IF_SALV_WD_COLUMN_SETTINGS~GET_COLUMN( 'IMAGE' ).
data image type ref to cl_salv_wd_uie_image.
CREATE OBJECT image.
image->SET_SOURCE_FIELDNAME( 'IMAGE' ).
COL->SET_CELL_EDITOR( image ). -
Max number of columns in Alv grid display.
Is there any limitation on number of fields that can be displayed using alv grid display.
Please tell how i can display 199 fields using ALV.
Thanks in advance.I am not sure of the maximum of columns possible.
If you see the col_pos field in the field catalog table it can have only 2 digits. so i would assume it would be only 99 columns, but not sure.
Would get you more information soon.
Thanks,
Balaji -
Hi Friends,
How can I find the table with maximum number of columns in the database 10g? Please help...
ThanksFor a particule schema/user, table(owned by user) with max columns:
SELECT TABLE_NAME FROM USER_TAB_COLS
WHERE COLUMN_ID = (SELECT MAX(COLUMN_ID) FROM USER_TAB_COLS)
--There can be multiple tables having same max columns
For a particular user/Schema, table with max columns ( tables owned by other users but user is having acces/grants to the table)
SELECT OWNER, TABLE_NAME FROM ALL_TAB_COLS
WHERE COLUMN_ID = (SELECT MAX(COLUMN_ID) FROM ALL_TAB_COLS)
--There can be multiple tables having same max columns
table with max columns in DB -
SELECT OWNER, TABLE_NAME FROM DBA_TAB_COLS
WHERE COLUMN_ID = (SELECT MAX(COLUMN_ID) FROM DBA_TAB_COLS)
--There can be multiple tables having same max columns
--This may include table in sys or other schemas as well
HTH,
~Yogesh -
How to get the number of columns in a result set???
hi everyone..
i am trying to establish a servlet applet communication....
my applet send the sql query to the servlet as serialised string and then the servlet executes the query...
Since i need to pass the result back to the applet, i thaught of passing the whole reult set to the applet..but that seems to be not possible..
so i thaught of storing my result set data in a vector and then pass the vector,but the first problem that i came across is that how to get the number of colums in a result set....
so is there a way to get the number of columns in a result set...???
and also i would like to know if it possible to send my whole result set to the applet bye serialization or by any method...???
thanx in advanceYou shouldn't do. It expenses resources (you should always close the ResultSet and the Statement as fast as possible). Simply gently process it into a Collection or Map of DTO's. Those are serializable.
Maybe you are looking for
-
ERR-1002 Unable to find item ID for item "FLOW_SESSION" in application
Hi, I installed the Tracking Issue application. It was working fine until I ugraded HTMLDB (latest patch). If I access it with another browser without going into htmldb development tool , it works fine. If I clic the RUN in HTMLDB development tool an
-
Has anyone had issues with the new Mac Pro computers and the Adobe Application Manager?
We just purchased a new Mac Pro and transferred everything from the old computer to the new one. Now we are getting Adobe Application Manager errors and it wants us to download Application Manager. That leads us to the Adobe Installer that encounte
-
Use my idop no my Mac and Windows
Who do I re-set my Ipod so that it would recognize both my and Windows 2000XP and my MacOS. I'm sure many of you out there can sympathize with this: 1 Ipod and access to all your goodies. 1 account. Anywhere in the world. Koppis
-
Key Note valid for use in specified state : error ...
Installing Skype failed error : code 1603 Ive tried uninstalling Windows Security update KB2918614. Ive also removed Skype and its contents from its previous location. Im really stuck ! what do i do ? i really need skype to work Solved! Go to Soluti
-
FTP Connection through R/3
Hi Friends, I need to handle file transfer between non SAP system & R/3 application server, in both way. This is to be handled through R/3. and it should be automatic i.e. we need this transferring pgm as scheduled one. 1. Is there any STD pgm to