How to avoid printing a blank page when there is 'no data' in the report.

how to avoid printing a blank page when there is 'no data' in the report.

try like this
if@section:IND=1
this template
end ifsectionbreak
if@section:IND=2
this template
end if

Similar Messages

  • Header Fields are not displayed when there is no data in the report

    Hi,
    I am having this strange situation in my webi report.
    When I refresh my report and when there is no data, column names are not being displayed in my report. All it is showing is two empty rows. When I have data, then report is displaying data along with column headings.
    Please suggest me where I am going wrong.
    Thanks,
    VenMen

    Thanks for the update.
    Can you try this.
    Run the report first time for some data.
    When the report is rendered select the table that is displayed.
    On the left pane side properties tab.
    Expand display and check all the options
    Show rows with empty measures
    show rows with empty dimensions
    Show when empty
    Hope this will help
    Regards
    Kultar

  • How to avoid printing a balnk page at the end in the Adobe form output

    Hello Experts,
        Can anyone please let me know as how to avoid/delete the blank page at the end of adobe form output.
    I have a master page with header n footer and a body page seperate.
    For ex.. I have 3 line items and i want each line item to be displayed in the new page. I am able to get this functionality . I have set the settings in the paginationb tab of the subform as
    "after " Go to Next content Area" " but an extra page is getting printed at the end. 3 + 1 extra pages total. I want to avoid this blank page. I have checked the Allow page break with in content box but it is still not working.
    Can someone guide me as how to solve this problem.
    Any help is appreciated. Thanks in advance.
    Regards,
    Mahesh

    hey mahesh,
    this normally happens because of triggering a new page manually, what u would have done is that you would be checking for the new line item and when this condition is satisfied , you are triggering a new page , the reason for the last blank page is that the condition gets satisfied ( beacuse the line item number changes from the last line item no to  initial or space).
    This can be handled by doing the following
    By knowing the number of line items by the following stmt.
    describe table itab lines v_lines.
    Now you have the value in v_lines.
    use a counter in ur form and keep it increasing it by 1  ( say v_sno ) ie v_sno = v_sno + 1 in the loop of ur internal table.
    ONLY WHEN V_LINES IS LESS THAN OR EQUAL TO V_SNO , TRIGGER THE NEW PAGE
    this should be along with the condition which u have already put, ie when ever line item no changes
    when both these conditions are satisfied , then only the new page will be triggered.
    Hope it helps,
    Reward if useful,
    Regards,
    KP.

  • How to avoid click/operation on page when an event is already in queue

    Hi,
    I have an app, in which we have a many fields which have patial submit.
    How can we avoid/stop user form taking any action of page untilll the previous request is responded back.
    -Nagesh

    In property inspector go to behavior section and set Blocking = true
    An Blocking attribute which if set to TRUE the component will start blocking user input when the action is initiated. The blocking will stop when a response is received from the server.

  • How Do I - Display a group when there is no data for the group?

    I have a report where I'm grouping on a numeric county number. Currently, if there are no records for that county, that report group doesn't display. My users want each county printed even if it has no data.
    The numeric values for county range from 1 - 85. I'm using CR 11.5 and pulling data from a Teradata database.

    Hi. I had already thought of doing an outer join on the county column of the county look up table. The problem is that this transfers the selecting and counting of the targeted data from the SQL statement to the report, specifically most of the formula fields itself. And given that the report is parameter driven, it would make maintenance of the report not so much fun. The solution ( I think, still have to code it) is to take my original inner join query and UNION it to a query selecting only the county column from the county look up table. I just add null valued columns to match the number of columns in the original query. This way I get at least one county record to satisfy the display of each group and only minimally increase the actual number of records the report has to process.

  • Insert data to MySQL when there is new data in the text file

    I have one log file, the log file will update its data (alarm type & datetime) when there is alarm. If I would like to write program to monitor the log file every minute, and insert the data to mysql when there is a new data in log file. Any Idea how to use java to write it ?
    Thanks !

    imagination21 wrote:
    Any Idea how to use java to write it ?Yes. But do you have a specific question? What's the problem?

  • When saving a PDF, how to avoid a re-dl'd - when it is in *already* in the cache

    G'day Folks,
    I refer to a PDF - but this applies to anything which has already been received and is thus in the local cache...
    When I choose to save a PDF, FF re-downloads the file.
    Why? ... that just wastes bandwidth. NB: I am on dialup and such activity can be *very* annoying & unnecesary. Especially when the PDF (or whatever) is quite large.
    Of course, some will argue that the (PDF) file may have been updated in the meantime - and the (very) latest version should thus be downloaded.
    However, I believe that is (a) highly unlikely and (b) should, in any case, be a user choice.
    I have searched for a switch/option to modify this crazy behaviour - but can't find one. Have I missed it ..? If so, *please* tell me where.
    If this crazy behaviour cannot be changed, is there an app which will allow the user to examine the cache and save the PDF... ie: independently of FF's "save as"?
    Many Thanks
    Barry

    I can partially answer my own question .. ie: workarounds.
    But if anyone knows how to handle this without workarounds,
    I'd appreciate a post please.
    Alternatives/workarounds:
    1. Type "about:cache" into the FF url box - and it will show a list of cached items.
    It is then necessary to search for what you require
    - which may not always be so obvious.
    The location on your (local) HD should then be available/visible.
    2. Use a (free) standalone program, eg: MozillaCacheView - Nir Sofer
    <http://www.nirsoft.net/utils/mozilla_cache_viewer.html>
    Option 2 may be the easiest - but is not ... 'integrated',
    so the usual caveats apply.
    Barry

  • Need User friendly message, when there is no data selected in report.

    Hi,
    Can we able to set user friendly message in place of system generated message in reports, while report generated with no data.
    I am using OBIEE 11.1.1.3.0
    Thanks,
    Archie.

    Hi,
    Go to your Results tab, and then click on the icon "Edit Analysis Properties" and select "Display Custom Message" from the "No Results Setting" drop down. Here you can edit and have your own custom message.
    Hope this Helps you.
    Regards,
    MuRam

  • Printing Limitations - Blank Pages

    Hello
    Hopefully someone can help me with this problem.
    The SED document is send to my email, it downloaded fine. When it comes to print out, there is no text or pictures - the printer sends out blank sheets.
    When I try to print out again, a message box springs up and tells me I can only print out 2 pages. No more no less. When I try again, the print icon turns 'grey' and I'm no longer able to print anything out at all in my document.
    This has happened to me twice today - if there's a solution, great. If there isn't, then I'm resolved to emailing the provider and asking them to re-send my documents. I'm curious as to why this should happen and hope it won't become a regular occurrence.
    Many thanks in advance!

    Hello there! Welcome to the forums @Jcobleigh 
    I saw your post about your 8500 Wireless now printing out blank pages, when you try to make copies, fax, or print. I understand you have checked the ink levels and they all look good and contain ink.
    My suggestion is for you to try the steps in this guide: Fixing Print Quality Problems for the HP Officejet Pro 8500 Premier (A909n) and 8500 Wireless (A909g...
    If the troubleshooting does not help at all, I would lastly suggest technical support.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Happy Wednesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Displaying zero values when there was no data

    There are two columns 'A' and 'B' in the report which has some values.IF there was no data in the report,it shows the following system message
    +"No Results+
    +     The specified criteria didn't result in any data. This is often caused by applying filters that are too restrictive or that contain incorrect values. Please check your Request Filters and try again. The filters currently being applied are shown below."+
    My requirement was to shows the zero values instead of this message in the table format and should show the chart at 0 axis.
    Please give me your inputs and help me finding the solution
    Thanks in Advance.
    Edited by: user10414249 on Dec 1, 2009 2:22 PM

    Because a report with no records will not produce a record "with zeroes," you have to think of another way to let the client know that the report was produced successfully, but simply with no data. We faced this issue with auditing. If no report shows, how does the auditor know that there were no data rather than the report itself not working that day? So what I did is build a "NIL Report." It is a simple report that consists of two columns. The first column is the system date column. The second column is column in which in the fx button (edit formula), I put in a text like "There are no records for this day." The first column serves two purposes: one, to timestamp the report so the user knows what day the 'NIL Report" was generated, and two, to serve as a column because OBI requires at least one column for the report to run.
    I also added a footer to the report which had the name of the original report in the left pane and the run date in the right pane. The Title View also contains the name of the original report. Now when viewed, this report has all the essentials to indicate to the user that 1) the report ran successfully; 2) the title of the original report so the client knows which report is associated with the "NIL Report"; and 3) the date the report was run to timestamp the report.
    So in one of the two sections, in the Section>Properties, you will use the guid. nav. feature of the section to look at the ORIGINAL report, but this section will have the "If request returns nothing" checkbox" checked off. Put the "NIL Report" in this section. When the original report produces no records, this section will display so the client knows that there were no records.
    This is what I mean by a "meaningful report" -- a report that conveys the necessary information to let the user know what is going on. There is no way (that I know) where you can have the original report display "zeroes" when in fact there are no records at all.
    HTH,
    David

  • How can I stop Address Book (Lion) from printing an extra blank page when I print an envelope

    Whenever I print a mailing envelope in Lion's Address Book, it prints fine but then prints a blank page following. How can I stop this?

    HP printers for years have had a problem printing an extra envelope from the Apple Addressbook Application with the # 10 envelope.
    Solution: Select a #9  envelop.  This prints about the same size and does not have an extra envelop.
    How to: From Address book, select print, Style: Envelopes, Layout: Layout pulldown Official 9 then print
    Interestingly the two smaller and two larger sizes only print one envelope. You can test this by clicking pdf and open pdf in preview.
    Over the years I have called HP and they couldn't solve the problem.
    I have told Apple today when I figures out the workaround.

  • I only get a blank page when trying to print a web page

    I have looked up how to print a web page and did exactly as shown on the screen (I did select my printer) but when I want to print a Web page I only get a blank page. I also cannot save as PDF in the Print Dialog Box because I get a blank page there too.
    I have tried to disable all my add-ons and extensions and re-enabling them one by one and it did not change anything.
    Although I did not specifically notice the exact date, I feel this has been happening since I have upgraded to Mac OS 10.6.4

    Wow! After several different attempts to solve my printing problems , the one that worked was the suggestion that I hit "Reset Firefox" button on the Troubleshooting Information page. Once I did that and got back in I was able to print pages correctly. Thank you for all your help and patience.
    -Eric

  • Blank pages when printing from Safari

    Hi,
    I have a brand new iMac running Leopard which is connected via USB to an older HP All-in-one (PSC 2210). The only driver available is from Leopard (none is available on hp.com)
    I can print documents (Word, Entourage, etc.) just fine. When I try to print from Safari (any website) it prints 5 blank pages, then part of the website, another blank page, a bit more of the site.
    Below is the email from HP.
    How can I fix this?
    Thanks,
    Bruce
    Hello Bruce,
    Thank you for contacting HP Total Care.
    There are no full feature drivers available for the Macintosh OS 10.5 that is compatible with the
    PSC 2210 The engineers will not be creating any full feature drivers for the PSC 2210 due to the age of the printer. You should have print functionality because of the built in drivers, but
    you will not have scanning functionality.
    Printing from a Web browser, a software program used to access the Internet, is often problematic since most Web pages are designed to be viewed rather than printed. Getting a successful printout depends on the way the page was constructed and the settings within the Web browser. In most cases, these problems have nothing to do with the printer itself.
    Open the web browser you wish to print from. Click on File, top menu bar, and select Page Setup. Make sure the PSC 2200 series is selected as the default printer in Format For. Click Print.
    If you do not have a Page Setup when you click on File, then just select Print. Make sure the PSC 2200 series is selected as the default printer. Click Print.
    If you are still having the same issue, bring up the document you wish to print. Click on Edit, top menu bar, and select Select All. Click on Edit again and select Copy. Open the Hard Drive/Applications/TextEdit.
    Click on Edit and select Paste. This should copy and paste the document into TextEdit. Click on File and select Print.
    If you are still having an issue, you will have to contact Apple for further assistance. The only other option HP can give you is an upgrade option.

    I was asking the question to test whether or not it is the website, not as a workaround necessarily.
    -mj

  • I recently upgraded to iOS 7.0.  When I open Safari to a blank page, a small "Settings" icon appears against the white background.  When I click on it, it opens  a link to a web page that is not among my other bookmarks.  How can I get rid of it?

    I recently upgraded to iOS 7.0.  When I open Safari to a blank page, a small "Settings" icon appears against the white background.  When I click on it, it opens  a link to a web page that is not among my other bookmarks.  How can I get rid of it?

    Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
    For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Is there a way to Print one's Purchase History?  I just get a blank page when I click on Print and cannot copy to paste elsewhere.

    Is there a way to Print one's Purchase History?  I just get a blank page when I click on Print and cannot copy to paste elsewhere.

    davidfromloudon wrote:
    Is there a way to Print one's Purchase History?
    Take screen captures and print them.  PITA I know but that is all that is provided.
    I just get a blank page when I click on Print and cannot copy to paste elsewhere.
    Correct.

Maybe you are looking for