How to avoid the Amount and Date values for VOID Cheques

Hi All,
I had created a two window i.e For Amount and Date. If I process the cheque the Amount value and Date should not trigger for VOID CHEQUES.
Can any one tel me how to avoid the Amount and Date values for VOID Cheques
Your help will be greatly appreciated.
Regards
Yathish

Hi,
I dont know which tablel you are referring to, is it PAYR table and the field VOIDR?
If a cheque is voided, it would have a reason and it is stored in VOIDR field of this PAYR table.
Check if the field VOIDR is filled, if it is filled, do not print the amount and date.
Regards
Subramanian

Similar Messages

  • I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to my laptop.

    I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to itune.

    You can't. It still thinks that your iPhone is synced with another iTunes library (the one that you had before you reformatted the hard drive.

  • Where could we find the CT and PT values  for Particular Device ???

    I 'm facing a scenario in  a report  i need to place a  field device number and assosiated  CT's and PT's .
    where could we find the CT and PT values  for Particular Device ??? basically im MM consultant   we don't ahave  DM consultant  please help with this issue???
    means actually i got the table and field  details  for transformation ratio (or) CT/PT ratio
                          ETYP_UEBERVER. from the screen EG03 , t-code
                            but im not sure   this  is the exact field that i require  ....
    can any one help ....   i will be very  thankfull to your  solution  inadvance....

    The transformation ratio are the attributes of a "Winding Group".  Find winding group of a device and then you'll get the desired information.

  • How to get the lock and block occured for the full day

    Hi,
         How to monitor the lock and blocks occurred for the full day? i need to get it by end of the day. is there any script for this?

    Hi,
         How to monitor the lock and blocks occurred for the full day? i need to get it by end of the day. is there any script for this?
    Why would you like to collect information about locks and let me tell you, you cannot collect information about ALL locks which were taken and even thinking about it is pointless.
    Coming to blocking if you have heavy system with huge concurrency there is bound to be blocking which is necessary and good for RDBMS but if the blocking remains for long time then this is a issue.
    There is DMV sys.dm_tran_locks which tell you what all locks are being taken. You can see various examples mentioned in DMV online documentation and can schedule the query to run every 5
    mins and insert its record in table which you can refer at end of the day.
    This task would be made very easy if you have Monitoring tool which gives you information in your mail every time blocking occurs I have Spotlight in my environment.
    If you are looking for doc for troubleshooting blocking  below is one you can refer
    http://support.microsoft.com/kb/224453
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • How to set the gain and input coupling for each channel on a NI 4462 DaQ card?

    I've seen a few examples in how to set the gain for NI 4462, but none tell me how to chose the channel I wish to set this gain.  Also the same problem with input coupling
    Does anyone know how to set the gain and input coupling for each individual channel?
    Thanks,
    Hector
    LabView 8.5 Windows XP

    Hey Hector,
    http://forums.ni.com/ni/board/message?board.id=100&thread.id=1688
    This has a few examples of how to do that.  Let me know if you have further questions.
    Have fun!
    -gaving

  • How to set the Mail and Fax options  for the Smartforms ???

    How to set the Mail and Fax options  for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .

    >
    veera Karthik wrote:
    > How to set the Mail and Fax options  for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .
    Hi
    Check this Link:
    http://help.sap.com/saphelp_nw04/helpdata/en/a5/28d3b9d26211d4b646006094192fe3/frameset.htm
    P.S: Never say reply me soon....people answer you here voluntarily and as everyone has their own desk to manage...sp replies may late or early..depending upon the availabality of the members.
    Vishwa.

  • How to extract the size and date from a given file

    Hi,
    I want to extract the size and date of a file (it can be either a video, audio or text file) that the user points to the location of. But I am not sure how. Does Java have an api that can do this? If not is there some other way of doing this? Can anyone help? Thanks in advance.

    Have a look at java.io.File, specifically
    public long lastModified()
    This format returned (I find) is nasty, so then use java.util.Date (or java.sql.Date, look the same on the surface to me) to format it.
    Cheers,
    Radish21

  • How to transport the CO and DATA file to SAP system

    Hello Experts ,
                          I want to know the procedure to import a transport request into an isolated SAP system ( which is not in the transport route ) using the CO and DATA files .
    I know that user should have adminstrator role to do this but i dont know how to do this .
    Regards
    Vivek

    Simply copy the source cofile and datafile from the source system to the target system and then import.
    Data file is located at /usr/sap/trans/<sid>/data with format R<transport_number>.<sid> and cofile is located at /usr/sap/trans/<sid>/cofile with format K<transport_number>.<sid>
    Copy them to the same location on the target system and then go to STMS -> Extras -> Add -> insert the name of the transport in format <sid>K<transport_number>, this will add the transport to the import queue then just simply import the transport.
    Regards
    Juan

  • How to know the time and date when someone empty trash?

    someone delete very important videos on my mac PC , i need to know the time and date of what happens on my pc for 2 days ago to can know who delete these files and when the trash being empty
    also, i tried very hard to recovery these videos by using Data rescue program but i found old videos instead of the last videos hasa been removed??? i don't know how???!!
    so can anyone help me please

    Open the Console app located in HD > Applications > Utilities
    Select System Log on the left.
    Type trash in the search fileld top right corner of that window.
    That should reveal the date and name of the file or files that were deleted but they cannot be extracted from there.

  • HT5624 I have an expired email account linked to icloud and don't know the password and can't reset the password due to not receiving emails anymore with the email account. Any ideas on how to retrieve the songs and data?

    I have an icloud account linked to an email address that is no longer in service.  I do not have the password for the account and am trying to retrieve the songs and data from the cloud to use on new apple device.  Any way to get a new password, able to open the expired account, without having that email account active?

    Hi there clarethasimmons,
    You may find the information in the article below helpful.
    Apple ID: Changing your Apple ID
    http://support.apple.com/kb/ht5621
    -Griff W.

  • Due to reinstallation of mac 2nd partition is nt showing how to recover the partition and data

    Due to reinstallation of mac 2nd partition is nt showing how to recover the partition and data

    If you have no backup your only option is to perform incomplete recovery (point-in-time recovery) to the time just before the drop, export the table and then restore the database (for example, from a cold backup taken just before the incomplete recovery,) and import the table. This obviously requires a full backup
    taken before the drop which you don't seem to have, so the answer is "regrettably no."
    If you have a backup;
    Take backup of ur current db, apply previous day backup, do point in time recovery to get table back,export table, shutdown and apply latest backup, import table back
    Regards,

  • How to save the variant and select it for displaying output

    For       ALV variant use the FM_REUSE_ALV_VARIANT_F4 and REUSE_ALV_VARIANT_DEFAULT_GET to allow the user to save the variant and select it for displaying output.If   any of the data (Z fields in VBAP) is blank,the cell in the column must be highlighted in red.

    Hi,
       Refer thsi code
    DATA : wa_variant  TYPE disvariant,       "Work area for variant
           wa_variant1 TYPE disvariant,       "Work area for variant
    *&      Form  sub_get_default_variant                                  *
    This form will initialize the variant                               *
    FORM sub_get_default_variant .
    *--Clear
      CLEAR wa_variant.
    *--Pass the report name
      v_repid = sy-repid.                     "Report ID
      wa_variant-report = v_repid.
    *--Call the function module to get the default variant
      CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
        EXPORTING
          i_save        = c_save
        CHANGING
          cs_variant    = wa_variant1
        EXCEPTIONS
          wrong_input   = 1
          not_found     = 2
          program_error = 3
          OTHERS        = 4.
    *--Check Subrc
      IF sy-subrc = 0.
        p_varnt = wa_variant-variant.
      ENDIF.
    ENDFORM.                                  "sub_get_default_variant
    Regards,
    Prashant

  • How to find the Conditions and Condition values in table entries

    Dear Experts -
    the issue is about getting the table entries of Pricing procedure Condition type and condition values - Application Component - MS external service management.
    In case of service order Condition document number (EKKO - KNUMV) is not updated.
    KNUMV we can use for Pricing procedure - Application componant - M Purchasing.
    How to get table entries of pricing procedure - Application Componant - MS External services management.
    Thanks in Advance

    Hi
    SES releated table:
    ESKL - Account assignment specification for service line
    ESKN - Account assignment in service package
    ESLH - Service package header data
    ESLL - Lines in service package
    ESSR - Service entry sheet header data
    ESUC - External services management: Unplanned limits for contract item
    ESUH - External services management: unplanned service limits header data
    ESUP - External services management: unplanned limits for service packages
    ESUS - External services management: Unplanned limits for service types
    Regards
    Prasanna R

  • Custom Report for the Stock and Stock value for a specific date

    Hi SAP Gurus,
    Is there any SAP standard t-code or any logic to get the transcations (additions (for example: Purchases) and subtractions (Sales) to the inventory) for a particular materials in a plant and with Total Stock and also Total Stock value when that particular transaction happened?
    Our system is R/3 4.7
    I looked at the MB5B, MBCE, MBCA, MC44, MB51 and some other standard T-codes but could not find the total stock value at the time of Transaction happened.
    The history tables MBEWH and MARDH  are updated after the month end closing procedures, right, which means I will have the inventory value changing every month if material has Price "S".
    Thank you,
    -Harter

    Hi Harter,
    Unfortunately, you cannot see in a single tcode the value of stock and stock quantity on a specific date. As you yourself have pointed out, we only have to make use of the history table MBEWH, MARDH for the month wise stock quantity and value. Along with that you should also make use of the table MBEW to take teh stock quantity and value. So the total value of stock on a particular date will be
    Stock qnty = MBEWH value until the previous month (for teh specific valuation class, period etc) + MBEW value for the present date.
    But this will nto work out if you want to find out teh stock quantity and stock value on a past date basis. For past data, only  m onthwise data is available. For this anyway you can refer to MC.1 and so on reports.

  • How can deploy the application and data to client?

    As I know, I can burn a CD with http://mobileserver/setup/webtogo/setup.exe and distribute this CD to client to install web-to-go Client.
    But how can I create a package for client to install my application and data?
    What tools should I use? Where can I get the information?
    Can you give/show me a simple example to make a package and install the package?
    Thanks a lot.

    Only the carrier to whom the device is locked can unlock it.
    StraightTalk is not a supported carrier... not all features may work.

Maybe you are looking for