How to block material issuing after sales order invoiced?

As the subject mentioned, could be a possible to block material issuing since sales order invoiced, or
in the another words, after the sales order completed?
Or could be a possible to set sales order as closed, and then material issuing related with this sales order are
forbidden?
Thanks in advanced,
Zhou Zhen

Dear Friend
A sales order is created say order no 10000 and for material X say 10 units this order is delivered and PGIed and invoiced and the payment too has come
That means the order 10000 is closed
Case 1
Now an user goes to VA02 t code and put this order no 10000 and changes the material X qty from 10 to 12 and opens up the whole order once again
This can be controlled by using t code OVAH choosing message class the V4 message no 083 and change from warning to error
Case2
But to avoid the user to add material Y to the existing order say 10000 then i think we have to go for user exit
Because the system doesnot even throw a warning message too in case 2 (according to my knowledge) and allows another line item to be added in the same order
But you can test it if it throws any warning message we can try to convert that error
But in case 2 it is not happening(even warning is not there)
Regards
Raja

Similar Messages

How to block material issue to work order

Dear Expert,
How do block material issue to work order when the item have been flag for deletion in MM module and have also been block for procurement and inventory in mm module.
Please help

Hi,
Thank you for the prompt reply, what you mean by the Standard SAP? can you provide the reference link? I am facing the problem that the item material have been flag for deletion and been block for procurement and inventory in MM module material master data however it still able to material issue to work order. Any ideal how to block the material issue to work order when the material item have been flag for deletion and block for movement in MM material.
Please help.

How to re-trigger BA00 after sales order has been rescheduled

Dear Gurus,
Could you please kindly advise how I could re-trigger BA00 after sales order has been rescheduled?
The scenario is following:
When the sales order was completed, the order confirmation output has been sent to the customer. But later, when the ATP confirmed quantity was changed or order was rescheduled, the committed delivery date has been changed. It caused confusion, because in the order confirmation letter we sent to customer, there is a different date.
I'd like to also trigger BA00 to resend the order confirmation, but I checked the output routine, it only checks if the order is completed or not. Shall I　ask ABAPer to add additional logic in the routine or there is other easier way to re-trigger BA00?
Many thanks in advance!

Have you allowed multiple issue for BA00 output type? In that case, you can manually trigger it from VA02. If you are trying to have it sent automatically, then add the logic into the routine.

How to change material discription at sales order item level ?

Dear Gurus,
We have some requirement need to change material description at sales order item level , but in system it is in disable mode how to change that into change mode in sales order item level?
Thanks in advance
Regards
Venkat

Not possible in SAP Standard.
Instead why not create a Customer Material Info Record in T-Code - VD51?
Alternatively it the requirement to change the Description is only for few Sales Order then create a Text ID & Enter the Description in Text Feild. Then in Smartform program wrie a code which will check for Material Description in the Text first & if not found then take from normal material Description in Sales Order.
But Customer Material info Record seems to be the best solution.
Hope this helps,
Thanks,
Jignesh Mehta

Credit management how to block amount on particular sales order

hi,
Client want to block amount on sales order.
If customer is having credit limit of 100000 n there are 3 sales order , sales order 1 amount is 50000,sales order 2 amount is 30000 and sales order 3 amount is 40000...
Now customer is coming n saying I want 40000 amount material of sales order 1.here my client want to block 50000 for sales order 1 so customer can not use amount for other sales order , system will check credit limit is 100000 and out of 100000 system should block 50000 for order 1.
Solution required...
If this is not possible then suggest me possible solution.
please suggest...

please note what you require is not possible in SAP.
Therefore there is no standard solution.

SD-how to process material packing before sales order entry?

Hi,Guys,
If materials are packed before sales order is created, like:
materia A, 10 batches was put in one bag,
how to model it in R/3? Handling Unit Management can still be used?
Best regards,
Cherie

Maybe I should tell the scenario more clearly.
Following is the physical process in a High-tech company:
10 finished goods: A , were produced.Batch is 001.
In the plant, they are packed into one bag. And this bag has a packing lable number:100
now comes the sales order for one bag of material A. Stock worker go to the warehouse to get the packing number:100 to deliver this sales order.
This scenario is different from the standard one using HUM. Because the standard scenario packing the materials when doing order entry,but this one is before order entry.

How to link Material Document with Sales Order

Hi,
When we receive stock through MFHU transaction it becomes sales order stock. The movement type used to receive these into stock would be 131 for MTS & 131 E for MTO. My question is how link Material Document (MKPF/MSEG) with Sales Order because later using that sales order and line item I want to get the planned order number in SAP from PLAF table.
Thanks & Regards,
Balaji Viswanath.

Hi,
To refer to Sales order you have to go to Purchase order .
Step1 -From MSEG table you can get the EBELN ( PO) EBELP
BWART (Movement Type).
Step2-Now go to EKPO and retrieve all the PO EBELN, LABNR corrresponding
to the PO found the MSEG table.
Step3-Now go to the VBAK for Sales order Header record and compare the field
VBELN = EKPO-LABNR+0(10) and to rerive Sales order item go to VBAP and
copmpare the fields VBELN = EKPO-LABNR+0(10) and
POSNR = EKPO-LABNR+10(5).
Thanks
PK

CM: how to block the last new sales order only and not all of them?

Hi,
We are testing the FSCM-CM and try to figure out this:
We have for a customer a number of open sales orders that are all below the credit limit.
Now someone creaetes a new order and with that amount the limit is exceeded.
The system reaction is that all open orders are blocked.
How can we set the system that only the last one is blocked?
Thanks in advance
Hein

Hein,
I dont think there is any standard function which specially points to the last order. System will consider all the orders in which the customer is involved. I think, the above post suggest the of number of days but not the last order. Try to play with the attributes of system messages and I am sure you will get a clue from it..
Reward if helpful..
Thanks,
Srib

How to do Goods Issue from Sales Order Stock?

Dear All,
we are doing a trading Scenario & based on customer requirement we procure the goods from our vendor & we receive it to Sales Order(special) Stock. Now what are the settings to be done in the Sales/Shipping so that when we do a delivery for our customer the Stock is Issued from our Un-res Sales Order Stock & not from un-res stock ?
Hope its clear.
Regards,

Hi Sam,
Thanks a lot for the reply.
Sorry for not explaining the scenario in the begining.
See I have to configure a trading Scenario with some changes from the std.
As in trading Process there are 3 entities.
1. Customer - X
2. Company - Y (Who performs trading)
3. Vendor - Z
Following is the breif requirment.
Company Y generated an inquiry in system for an item with respect to customers RFQ. Now since Y doesnt manufacture the product(item) it creates a PR in background with respect to inquiry.
Based on this PR, Y procures & receives the good into Un-restricted Sales Order Stock (with ref Inquiry doc no:).
Now based on price Quoted by Z, Y will create a Quotation with ref to inquiry & finally a SO for Customer - X with ref to the Quotation.
Now at the time of delivery (creatd with ref SO) system is not able to issue the goods from the sales order stock since the stock is stored with ref to inquiry no: & delivery is with ref to SO.
So I am planning to simulate a cycle by creating a delivery & PGI with ref to Inquiry.
If you can suggest a way out, it will be highly appreciable.
Hope its clear.
Regards,

How to add material characteristics in sales order via BAPI?

Hi all!
I'm trying to use BAPI_SALESORDER_CREATEFROMDAT1 to create a sales order with one item that has some characteristics, but i can't seem to get it work. It creates the salesorder with the item but without characteristics data. Can somebody tell me what could be wrong?
Here's the code:
header-doc_type   = 'TA'.
header-sales_org = '3000'.
header-distr_chan = '10'.
header-division   = '00'.
items-itm_number = '000010'.
items-material   = 'CP-12'.
items-req_qty    = '1000'.
APPEND items.
partners-partn_role = 'AG'.
partners-partn_numb = '0000050000'.
APPEND partners.
c_ref-posex     = '000010'.
c_ref-config_id = '000001'.
c_ref-root_id   = '00000001'.
APPEND c_ref.
c_ins-config_id = '000001'.
c_ins-inst_id   = '00000001'.
c_ins-obj_type = 'MARA'.
c_ins-obj_key   = 'CP-12'.
c_ins-complete = 'T'.
c_ins-consistent = 'T'.
c_ins-quantity = '0'.
c_ins-quantity_unit = 'ST'.
c_ins-class_type = '300'.
APPEND c_ins.
c_val-config_id = '000001'.
c_val-inst_id   = '00000001'.
c_val-charc     = 'CP_12_ADD_ON'.
c_val-value     = 'F'.
c_val-valcode   = '1'.
APPEND c_val.
c_val-charc     = 'CP_12_COLOUR'.
c_val-value     = 'M'.
APPEND c_val.
c_val-charc     = 'CP_12_MODEL'.
c_val-value     = 'M'.
APPEND c_val.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
EXPORTING
    order_header_in           = header
    convert_parvw_auart       = 'X'
IMPORTING
   salesdocument             = salesdoc
   return                    = return
TABLES
    order_items_in            = items
    order_partners            = partners
   order_cfgs_ref            = c_ref
   order_cfgs_inst           = c_ins
   order_cfgs_part_of        = c_prt
   order_cfgs_value          = c_val

BAPI_SALESORDER_CREATEFROMDAT1
"(obsolete from 4.6 version)
BAPI_SALESORDER_CREATEFROMDAT2
please see the version and change the BAPI
reward points if it is usefull ....
Girish

How to actual material data in sales order

Hi,
i create an sales order (VA01) with 1 Material (say 300400). Now i can see, that some data (Gross Weight and Net Weight)
are not correct (empty).
Now i go in an new modus to MM02, change this fields and save this material.
Now i go back to the modus of sales order and will actual the data of 300400.
Is this possible? I have not find any way.
Thanks.
regards, Dieter

Hi Dieter,
You will have to maintain the gross and net weight in MM02. Then create a new sale order so that it will reflect.
It will not reflect for the old sale order. Do revert if any doubts.

How to restrict saving of a sales order without a material.

Hi Gurus
Please advice How to restrict saving of a sales order without a material. That is the system saves the order even if no item is assigned to it.

Hi Raghu,
In standard SAP we can not do that. Even for some requirements of the customer this feature is required, specially in case of milestone billings, custom materials etc. client after saving the empty sales order they may create materials based on that sales order number.
If it is mandatary for u to save sales order only after the entry of the materials, u can try user exits or go for a code with the help of an ABAPer.
Regards,
Ravi Duggirala
Edited by: ravi duggirala on Jun 20, 2008 11:11 AM

How to check the analysis of material determination in sales order

hi,
We are trying to create a sale order with material determination. Material determination analysis is on. After switching this on while adding a new line item, in an existing sales order, we are able to do analysis as the system itself takes us to analysis screen. But once the document is saved, we need analysis to be done at material determination for the determined materials , something similar to pricing or account determination analysis.Please help
Regards,
Aparna.

Hi,
If you drag the line item a little towards the right side, you will find a filed material entered. The one you see in the material filed on sales order over view screen is the one determined. You can as well double click and see the fields material entered and material determined.
Is there anything else you are expecting to see as part of analysis ?
Regards
Sadhu Kishore

How material transfers from sales order to service order

Hi All,
In case of sales order (Debit memo request or quotation) created from service order, material in service order is transferred to sales order via DIP profile.
but in case of,
service order created from sales order how the material flows from sales order to service order.
In customer service module.

If Service Order gets created from Sales order, operations & components are transferred to Service order through Service Product assignment in Sales Order.
Service Product will be created in MM01 & this will be linked to Task list in OISD. By assigning this Service Product in Sales Order, Service order will be created automatically with the assigned Task list.

How to change the status of material while creating sales order via BDC

Hai.
In BDC while creating sales order( va01 posting ) it is stucking up in middle saying material is new. I.e Sales order (va01) is not getting created because of material status is new . I want to create sales order (va01) even material status is new.
pls give me out the solution. Points will be rewarded.
thanks & regards,
sami.

Hi,
If you drag the line item a little towards the right side, you will find a filed material entered. The one you see in the material filed on sales order over view screen is the one determined. You can as well double click and see the fields material entered and material determined.
Is there anything else you are expecting to see as part of analysis ?
Regards
Sadhu Kishore

How to block material issuing after sales order invoiced?

Similar Messages

Maybe you are looking for