How to block or delete a Cost center

Dear expets ,
                    how to block or delete a Cost center.
regards
rajakarthik

Hello,
How can i do to delete the input that the cost center receive it? ineed to do this .....because....
i needed to complete transaction okeon , but it showed  me a message " society have duplicity" . Because of  putting it  duplicated cost center. And this cost center already has input values.
Thanks....
Elida.
Argentina, tucuman

Similar Messages

  • How to delete a cost center hierarchy

    Hi all,
            We are having a issue regarding the cost centers. The cost centers have been assigned wrong cost center numbers. Now the client wants a set of new cost center numbers to be used in the system. In order for that to be done I thought may be if I can change the cost center hierarchy that has been assigned to the controlling area in OKKP transaction we can assign new cost centers to the new hierarchy and solve the problem.
              But the system does not allow us to assign a different cost center hierarchy from the already existing one when cost centers are assigned to it.
    My issue is how to delete the cost center hierarchy.
    If that is not possible how can we remove the cost centers assigned to the cost center hierarchy ( is this possible)
    Last question can we delete the transaction data posted to cost centers.
    Points will be assigned to all the replies.
    Thanks,
    Sarada

    Hello Sarada,
    If the requirement is to track new cost centers only going forward, then you may need to create new Cost Centers, block old cost centers. Create a new node in the hierarchy saying "Old-do not use".
    If the requirement is to have the history transactions reflect the new cost centers as well, then you will need to undertake a project for SLO (System Landscape Optimization) which will replace this data at table level. This is a major project in itself and the programs are proprietary to SAP.
    Hope this helps.

  • How to delete the Cost center line item data

    How to delete the cost center line item data of particular cost center and only one cost center is exisiting for that company code.
    Is there any way to delete the line items in that cost center.
    Can data archiving & deleting can help us..........
    does it have any effect over other cost center data....
    any input needed.........
    regards
    rajesh

    Hi,
    i found 2 reports for you:
    1) CO_TOTAL_WRI - Archiving CO Totals Records   
    2) RKCOITW1     - Archiving CO Line Items: Write Program        
    from 2) is a linlk to customize archiv-parameters
    -> start it with transaction se38 / sa38
    A.

  • Delete all cost center

    Hi all,
    I use LSMW to create all cost center for system. However, all cost center have codename wrong, so I want to delete all cost center and create again. Can I? How by? I have many cost centers so I cant use KS04. Please help me, thanks very much!
    P/S: some cost centers have data posting on it.
    Regards

    Hello Tran,
    For cost centers that have data in them you can not delete them. There are two options
    1. Block those cost centers : Go to the control tab in the cost center master data and check all the boxes there.
    2. In case its a non live system and if you do not have much data then you may delete the transaction data with transaction OKC3 but the problem is that it would delete each and every data posted in CO. After this you can delete the cost centers using OCK4 or KS14.  This is not a recomended approach and you should only use it only when you can do away with the data posted if that is very less. In this process you may loose important test data in you need them.
    Kind Regards // Shaubhik

  • How to change purchase order's cost center in batch

    Dear all :
    how to change purchase order's cost center in batch?

    Dear Manish :
    thanks so much for you reply.
    the filed which i wanted to change it's content is cost center (KOSTL) in table EKKN.
    i couldn't find it in this t-code when i select fields.

  • Problem in deleting the Cost center

    Hi
    When i am trying to delete a cost center, i get the following error :Usage in table T811C
    (T811C: Cycles in Overhead Cost Controlling or Profitability Analysis )
    Can you help me in solving the problem
    Regards
    Venkata NR Chundi

    hi,
    you are use t.code ks04.
    and delete the cost centre and check standard hieraty option.
    if any problem than discuss me .. than further process are given.
    rohit

  • Archiving  & Deleting the Cost center line items

    My requirement is to delete the line items in the cost cneter as of today, but when i tried to archive & delete the Cost center line items using CO_item,i aam sucesfull in deleteing the past data, but the data of the last month and currenct month i was unable to ........
    when i tried in the spro>img>controlling>general ontrolling>archiving>prepare archiving for co line items
    i set the resident time to 0,but i was unable to delete the line items.what colud be the reason and what is the way to delete the currenct data also from the system.
    your earlier reply surely appreciated .......

    Hi Rajesh,
    I think SAP help says that the period for which you are planning to delete or archive data may have to be locked.
    Check the following links:
    For Archiving
    http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e55ec462a11d189000000e8323d3a/frameset.htm

  • How to change company code in cost center master

    Hi,
    Can anyone throw me the light about how to change company code in cost center master? User make some mistake. They maintained wrong company code in cost center master and there are some transactions already posted to this cost center. I would appreciate all attention and point will be reqard. Thanks much
    Best Regards,
    Bird

    Hi,
    The cost center master data fields have time dependancy.  Following are the details of time dependancy.
    You can maintain master data for cost centers, cost elements, activity types, and business processes as time-based. Changes to any other time interval are possible at any given time. Data storage is also time-based. In this way, you can store multiple database records for a master data record, each holding different information.
    The time-based dependencies are determined by SAP and cannot be changed. The following dependencies are possible:
    Not time-based
    Day-based
    Period-based
    Fiscal Year-based
    Cost Center's company code field's time based dependancy is Fisal Year Based and hence, the company code can be changed on cost center only on new fiscal year.  And hence, system will not allow changing company code on cost center master data until new fiscal year if transactions are posted to the cost center.
    You may have to think of work around :
    1) Create new cost center with correct co code
    2) Repost the cost posted to old cost center (with wrong co code) to the new cost center.
    Explore the possibility of this work around on your system with the key user and then see whether this option works out.
    Hope this helps.  Pls. assign points if this is helpful.
    Regards,
    Chirag

  • How to make fields mandatory in cost center

    Hi Sap Experts,
    How to make fields mandatory in cost center.
    Please give me advise.
    Regards,
    Raj

    If you want to make "Profit Center" field as mandatory, then OBA5 transaction code
    Application Area - KS
    Number 096
    make this as error for online and batch input. Then profit center will become mandatory.

  • How to use the next 'initial' cost center in infotype 0027

    Hello experts!
    I need some help in posting in infotype 0027 which should be fairly easy to most of you. As you guys know, there are a total of 25 cost centers available (KST01-KST25) for this infotype. What I want to do is check from KST01 if it exists with a valid entry at a specific date (BEGDA and ENDDA will be provided as well) all the way up to KST25 and choose the first cost center field that is INITIAL. This is used before 'BAPI_COSTCENTER_CREATEMULTIPLE' so that if KST01 up to KST05 all have values on the same BEGDA & ENDDA, how can I have KST06 chosen? Thanks in advance for your help!

    Hi,
       Write as below.
    data : p_0027 like pa0027 occurs 0 with header line.
    data : lv_KOSTL type KOSTL.
    data : lv_index(2) type n.
    data : lv_cost(12).
    field-symbols : <lv_kostl> type any.
    select single * from pa0027 into p_0027.
    do 25 times
          varying lv_KOSTL from p_0027-KST01 next p_0027-KST02.
      lv_index = lv_index + 1.
      IF lv_KOSTL is initial.
        concatenate 'KST' lv_index into lv_cost.
        exit.
      endif.
    enddo.
    assign  component lv_cost of structure p_0027 to <lv_kostl>.
    IF sy-subrc = 0.
    <lv_kostl> = '100'.    " <-- Assign any value here
    ENDIF.
    Regards,
    Srini.

  • How to block attachment deletion in a DMS document

    Hi gurus,
    Does anybody knows how to block some users to delete the attachment in some DMS types? Is there any configuration that can be done to control this?
    Many thanks!
    Renan

    Hi Renan,
    in the standard each user who is able to edit the document info record (enter CV02N) is able to delete the attached originals.
    However a user is not able to delete originals if the document is set to a status of status type 'S' (locked status). Within this kind of status it is not possible to delete originals and change some other document data.
    So you can also try to create a authorization profile where some users are only allowed to enter document info records with a non-locked status. So you avoid that some users are able to enter document info records which are not set to a locked status.
    For this please see the WIKI page under https://www.sdn.sap.com/irj/sdn/wiki?path=/display/plm/caDMS-AuthorizationObjects where you will find all the existing DMS authorization objects.
    Maybe object C_DRAW_TCS or C_DRAW_TCD could be useful for this issue.
    Best regards,
    Christoph
    P.S.: Please reward points for useful information

  • How to change Functional area in cost center master

    Dear Guru,
    As required, i have to change the Functional area in cost center master data.
    SAP Warning Message :
    Transaction data exists; note long text
    Note
    A change of the functional area can lead to inconsistencies when reversing documents.
    If documents are reversed after the functional area has been changed, in some cases,
    the reversal document may be posted with the new functional area.
    My question is how to change the new functional area to the old one after reversing documents.
    We aren't using Special Purpose Ledger . Please Help me, thanks.

    Hi
    For the transactions already posted you will not be able to change the Functional Area. Also if those documents are getting reversed now after the change, the reversal document will get posted to the new Functional Area only.
    For all those documents which gets reversed after the change, you need to pass FI journal entry by changing the Functional area in the journal entry and not in the Cost Center Master
    Regards,
    Lakshmanan Krishnan

  • How to create File description in cost center planning (T Code -KE13)

    Hi,
    Experts,
    I am creating Cost center planning in KP06 and would like to create my own layout(File Description) using excel. e.g. 01_1P1_IDES1572_001IDES-1572 as this is the standard SAP file description. How to create my own this way as per my excel layout.
    Regards,
    Jagruti Collaco

    <b>Three steps:
    Identify or Create planning layout.
    Identify or Create planning profile.
    Create file description.</b>
    Next upload the data.
    Detailed Steps
    Identify or Create planning layout.
    Identify an existing standard layout or else
    Create planning layout through KP65 (you can also copy a standard and modify it)
    Identify or Create planning profile.
    Go to SPRO>Controlling>Cost Center Accounting >Planning>Manual Planning>Define user defined Planning Profiles.
    Create a new Profile. You will see nodes or folders on the left indicating General Controlling>Layouts for controlling> and Default parameters.
    <b>Choose the layout for controlling and enter the layout you chose in earlier step.
    Enable Integrated excel checkbox and overview (everything you can)
    Next, select the layout and double click on default parameters.</b>
    Enter a test data with cost center, elements, period, version, year. and save all. You may want to save the file as a model in your desktop with a different name say CCAPlan.csv. (You will notice, as you come out a new file description field that was blank earlier is now populated with a name like 01_1P1_(layout name)XXXXXX_Profile Name (XXXXX)
    Come out of the screens.
    Go to KP06, extras. excel upload via extras. or KE13

  • Block payroll data from cost center for all users except HR team

    Hello Expect,
    Could any body please advise me  how can I restrict some HR data  in cost center view from FICO,CRM,SRM and other team,
    Now when other team see cost centers it display all data booked there but my client want to restrict some HR data from them
    In my project there are 151 roles that can display cost center dat including HR data,
    Now my requirment is how can I restrict only HR data belongs to a cost center
    I mean to say they should be able to see all cost center data exept a cost center containing HR data.
    Please advise how to get solution
    Thanks and Regards

    Hi,
    in  T.code PFCG do to the role of the appropriate usr to whom u want restrict cost center.
    Hope this helps.
    Reagrds
    S.Ravi

  • How to obtain object number using cost center??

    hI.
    i need to obtain all the cost elemnts of a particular cost center..
    cost elemnt can b fetched from COSP using OBJNR..
    How do i obtain OBJNR using KOKRS,KOSTL????

    Hi
    From the table
    CSSK
    take the related Cost elements for a cost center.
    Concatenate the cost element with KS and other Orgn unit
    and pass to the Costing tables
    see an entry in those tables you will know what are the fields in OBJNR that are concatenated
    Reward points if useful
    Regards
    Anji

Maybe you are looking for