How to broadcast Wifi Signal from MBP when using AT&T mobile card.

I have a Macbook Pro and access the internet via an AT&T wireless modem card (USB Quicksilver). Is there a way to broadcast a Wifi signal so that I can get internet on my new iTouch ?
Thanks for any help !!
Cindy

Yah, Seattle: I see what you are talking about: when you try to enable share, the message is "you haven't enabled a port to share", and the only offer is ethernet? I do share my wireless AT&T AirCard. Are you sharing with a PC, or more Macs, on Airport? It took me a while, when I first enabled the share on Airport. From System preferences > Internet and Network > Sharing, there is no joy. First go to Network Preferences: enable Airport; whatever it takes; Network name you self-assign. Now when you go to SysPref > Sharing > and check Internet Sharing, you get another scolding: "You cannot share 'cause no ports; or share from Airport to computes using ..." Go to Network Preferences > Airport > Network Name > Create Network, or if the other computer is up and around, > Join Network. Mine werke,s but it was ugly getting it up to a PC wireless ... I got it almost there and then had to go 128 bit encryption password etc to make the (corporate) PC happy. This is not plug and play ... Keep trying and take notes and post back.

Similar Messages

How to transfer range parameter from vb when using bapi calling

Hi,everyone.how to transfer range parameter from vb when using BAPI calling?

Did you get the solution to your problem? Can you please share it with me. I have a similar problem. I have a VB program that calls RFC function. It works with a single parameter but not with a range of parameters. If you have the solution, could you please share sample codes with me? Thank you so much.

How can I prevent iPhoto from launching when I insert an SD card

I recently upgraded to a new iMac retina and am having trouble disabling iPhoto from launching when an SD card is inserted.
I have gone to iPhoto setting and disabled iPhoto from launching when a camera is connected.
I have also gone into image capture and selected no application as the hidden option for SD card actions when inserted.
Unfortunately the issue persists... two questions: can I do a terminal level disable to prevent iPhoto from launching or can I remove iPhoto from my computer?

Have you tried this?
Open the Image Capture app
Select your SD Card
Click the little widget in the bottom right corner of the window
Select the program to launch, or "No application"
it worked for me

How can I keep pages from scrolling when using keyboard page-down

The bottom of the pages window has a gear. You can select "Page" in the drop down menu and click the arrow, to perform a page down. The new page is positioned exactly like the previous page. But when I type fn+down-arrow or cmd+down arrow the new page view is either higher or lower than the previous page. Resizing the window makes it almost possible to get a consistent page display but not quite. It's awkward trying to read a document when each new page jumps to a new position. The arrow next to the gear is the only solution I've found.
Does anyone know a way to achieve this page down view using just the keyboard. I'm using the iMac wireless keyboard?
Thanks,
Mark

It is an annoyance, due to the 2 meaning two different things.
The page down key means the whole window view which is not the physical page that you see in Pages.
Apple could have clarified it by labelling the key +window down/up.+
Peter

How to Stop the preview from jumping when using .avi's??

Hi
Ive been having aproblem where the .avi file I have imported will just jump forward , making it impossible to edit.. I have try reconverting th.avi's to lower bitrate, and still it jumps ,, the avi files iam using having been converted from SUPER to .avi with h.264/AVC Video Codec, at 1280 * 720 and 29.97 Fps -> Bitrate 2208 kbs,, if anyone has any suggestions,,??

DV won't handle John's frame size. He may be better off using Desktop mode with something like the Lagarith codec, though Premiere may not edit perfectly smooth with that one either.

HT5569 Why do I continue to have difficulty connecting to WiFi from my iPhone5? It rarely even picks up signals from networks when my other apple products work.

Why do I continue to have difficulty connecting to WiFi from my iPhone5? It rarely even picks up signals from networks when my other apple products work.

Hey CEW724,
Thanks for the question. I understand you are experiencing issues with Wi-Fi connectivity on your iPhone 5. The following resource may help to resolve your issue:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
1. Be sure you're in range of your Wi-Fi router (access point).
2. Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed,follow these steps.
3. Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
4. Restart your iOS device.
5. Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
6. Tap and Forget this Network.
7. Try to connect to your desired Wi-Fi network.
          Note: You may need to enter your Wi-Fi password again if your network requires one.
8. Turn your Wi-Fi router off and on. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
9. Update your device to the latest version of software.
10. Update your Wi-Fi router to the latest firmware. For AirPort Base Stations, install updates using the AirPort Utility.
Unable to locate a Wi-Fi network
1. Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks. Note: It may take a few seconds for the Wi-Fi network name to appear.
2, Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
3. If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
4. Supported Wi-Fi configurations vary by iOS device model. Find out which standardsyour device supports3.
5. Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
          - previously connected Wi-Fi networks and passwords
          - recently used Bluetooth accessories
          - VPN and APN settings
Thanks,
Matt M.

How to setup a wrt54g router as a wireless access point to extend wifi signal from e3200

how do i setup a wrt54g router as a wireless access point to extend wifi signal from e3200 which is broadcasting the internet?
everyone keeps saying to remove the stock firmware and instal the dd-wrt firmare to do this. can i do this with the stock firmware?
any tips to avoid interfearance once setup?

You have to connect both with a cable.

Wifi signal from Airport Extreme doesn't reach all areas of my house. Is there a way to extend it without sacrificing bandwidth? Airport Extreme version 7.6.1

The wifi signal from my Airport Extreme doesn't reach all areas of my house. Is there a way to extend it without sacrificing bandwidth? I have an Airport Extreme running version 7.6.1.

You will need to add another device like an AirPort Extreme to provide additional wireless coverage in the house.
The only way to preserve bandwidth on a network would be to connect the two AirPort Extremes using an Ethernet cable connection.
While you can "extend" using wireless only, typically half of the bandwidth on the network is sacrificed when you do this.

How do I prevent Mail from opening when I click an email address in Safari?

My wife and I both use Yahoo! Mail. Neither of us uses the Mail app to manage our email. How do I prevent Mail from opening when we click an email address in Safari? Is it possible to direct Safari to open a separate web browser prompting us to log in to our Yahoo! Mail?

Hmm.. probably not.
You want to open Mail. Then go into Preferences > General and you will see something similar to this:
In the area marked Default Mail reader click on the pull down and at the bottom of the list it will say Other. You can see if you can select Safari here and if that will open up Safari.
Good luck.

How to Delete the node from cluster when the machine crashed?

In an three nodes Rac of 11g r2,How to delete the node from cluster when the machine crashed?
There is now way to repair the machine and have to add a new one.
What is step to follow up?

hi
IF YOU WANT TO DELETE RAC1 NODE
check $./olsnodes
1) delete the instance using dbca from any active nodes
crs_stat -t
srvctl stop asm -n rac1
2) delete listener
3) delete oracle_home from oracle user
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={RAC1}
4)delete asm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={RAC1}
5) update cluster node
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={active nodes like rac2,rac3}
6) update ASm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={active nodes like rac2,rac3}
cd $ORA_CRS_HOME
cd crs/opmn/conf
check for
$cat ons.config
remoteport=6200
cd crs_home/bin
$./racgons remove_config rac1:6200
$ go to crs home
and $ORA_CRS_HOME/crs/install/rootdelete.sh
$ORA_CRS_HOME/crs/install/rootdeletenode.sh
check for ./olsnodes

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

See below if the search engine setting was changed without your knowledge and you can't change it back.
You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

I have an Iphone 4S, when I am on the phone and I get a new message my phone vibrates and rings. How can I stop this from happening when I am on the phone

I have an Iphone $S, when I am on the phone and I get a new message my phone vibrates and rings, How can I stop this from happneing when I am on the phone

Flip the Ring/Silent switch. Make sure Vibrate when silent is off in Settings>Sound.

How do I stop photoshop from starting when I open a jpeg file?

How do I stop photoshop from starting when I open a jpeg file?

In windows, right click on the file, select the program that you wish to use to open the file, and be sure to check to always open this type of file with the seleted program.

How do I stop apps from relaunching when restarting my macbook?

How do I stop apps from relaunching when restarting my macbook?

Adding to the list of quitting app's before shutting down and the reopen app's options above, go to: Apple > System Preferences > Users & Groups > Login Items and remove any unwanted App's from the list that are set to open at login.

How do I stop iPhoto from opening when i plug in my iPhone?

How do I stop Iphoto from opening when I plug in my Iphone?

Having the preference in iPhoto makes perfect sense to me. After all, iPhoto is the application that opens. You would expect that is where you should provide some guidance not to open.
What puzzles me much more is why you would post this comment more than 18 months after wjosten answered the original question.

How to broadcast Wifi Signal from MBP when using AT&T mobile card.

Similar Messages

Maybe you are looking for