How to bundle a queue?

I've used bundle before on regular data types etc
Can't seem to work out how to bundle a few queues into one?
Mainly for aesthetics on the block diagram, so I can pass the bundle into my SubVIs and unbundle and use as necessary?
Tried connecting queues into both 'bundle' and 'bundle by name' but with no joy? Or is that off the ball totally?
Cheers Message Edited by Michael Burgess on 03-31-2005 03:04 PM

I would start by getting all my ques into a bundle, then I would right click on the bundle and create an indicator this will have all the ques references in it.Then I would copy it into the subvi and make a control for it. Here is an example I threw together.
Joe.
"NOTHING IS EVER EASY"
Attachments:
Que.llb ‏40 KB

Similar Messages

  • How to clear outbound Queue in  SXMB_MONI

    HI Experts,
    Unable to process the file in SXMB_MONI as a result the files are getting strucked with the QUEUE and now how to clear this queues for processsing the file...
    and another i have configure the server with 611 client but while executing the client of the server is showing 001 and we didn't observe initially as it is working fine but when we observed now it is found
    is this has an impact..
    do we need to do any other certain configurations at the Server end..
    regards,
    Kishore

    > There is no URL in SXMB_ADM, how to provide an url there, and even before we didn't get this problem as the files are successfully processsing for the past 3 months in PDN, and now we are getting this problem.
    >
    Hello,
    I have understood your problem but you are not following the steps which we are mentioning here.
    For your above problem you need to follow ONLY step no1 & 2 mentioned in the blog since steps are common for acitvating the proxy and thats way you are getting confused that why I am asking you to follow that blog.
    In the blog step 1 will simply help you creat the RFC destination.
    Step 2 will help you to use the above RFC destinaiton as an url.
    In opionion if you resolve this problem first then it will be easier to solve your queue problem.
    Please let me know if you need more help/clarification in this regard i will help you.
    Regards,
    Sarvesh

  • How to configure JMS queue on OC4J server. Development in JDeveloper 10G

    Hi there,
    I have to configure a JMS for an Asynchronous process in my Application which will be running in Oracle 10G Application Server. Development Environment is Oracle JDeveloper 10G.
    I am facing a problem on how to configure JMS queue.
    Steps Followed are:
    in the <JDevloperHome>/j2ee/home/config
    1. Made the new queue and connection factory's JMS entry in jms.xml.
    2. Specifed the queue in oc4j-connectors.xml.
    3. played around with application.xml
    and tried all combinations, but the message producer always failed to lookup the queue.
    Need help on the steps to follow so that the producer can post the message in the queue.
    Also please help how to configure the MDB to listen to the queue.
    Thanx and Regards
    Subham

    If you were dealing with Oracle 10g app server as opposed to standalone, I might be better able to help you.
    One thing though, when you are configuring your MDB in the orion-ejb-jar.xml file, do not forget to specify attribute listener-threads, otherwise no matter how many beans you have in your MDB pool, only one bean will be listening to the queue. Many listener-threads equal to max number of beans in pool.

  • How to define a queue in SPAM?

    how to define a queue in SPAM?
    And also tell me the steps or procedure to apply support packs .

    Hello kumar,
    - Download the support packs from service.sap.com (provided you have a login ID) to the usr\sap\trans directory.
    - Open a command prompt and change the directory to
    NT: :\usr\sap\trans
    UNIX: /usr/sap/trans
    - Unpack the support packs using the following command:
    NT: CAR -xvf :
    .CAR
    UNIX: CAR -xvf ///.CAR
    This command unpacks the files that need to be imported into your SAP instance into the usr\sap\trans\eps\in directory.
    - Log into client 000 as user DDIC
    - Call transaction SPAM
    - Once in transaction SPAM, go to menu option Support Package->Load Packages->From Application Server. It will ask you if you want to upload the files - click the green check mark on the box that appears to upload the files.
    - Another screen will appear listing the files that you uploaded successfully - just click on the Back arrow to get back to the SPAM screen.
    - On the SPAM screen, click on the Display/Define button.
    - A box will appear with the Support Package categories (Basis, ABA, etc.)
    - Click on the category for the support packages that you uploaded and it will list them in order.
    - You can apply them individually or the whole list at one time.
    - To apply individually, select the first one in the list and then hit the green check mark at the bottom left of the box. Then on the SPAM screen, go to menu Support Package->Import Queue.
    - Confirm that you want to import the support package.
    - Once it is done importing, you have to confirm the queue by clicking on the
    Confirm Queue button - this will turn the yellow light in the Status area to green.
    *Always check your logs after applying support packages by clicking on the Logs button in the SPAM screen.
    Regards,
    Raju.

  • How to delete JMS Queue using WSLT thru JNDI?

    How to delete JMS Queue using WSLT thru JNDI?

    Hi,
    You can use the following WLST script to delete the queue :-
    edit()
    cd('/JMSSystemResources/MyModule/JMSResource/MyModule')
    startEdit()
    cmo.destroyQueue(getMBean('/JMSSystemResources/MyModule/JMSResource/Mymodule/Queues/MyQueue'))
    activate()
    Is it what you are looking for?
    I hope this helps.
    Regards.
    Edited by: mchellap on Dec 11, 2008 4:27 PM

  • How to configure Custom Queues in B2B

    Hi B2B Gurus,
    Could any one tell us how to configure coustom queues in B2B
    1. I created a AQ's in B2B database using scripts , could any one tell us how to configure these in B2B. Please elobrate step by step
    2.In 10 G , document protocol parametrs we have interchange sender id and receiver ID, Group sender Id and receiver ID, but these parameters i am not able to find in 11G....
    Regards
    charls

    Francis wrote:
    Outbound:
    We need to configure all outbound queues in ( host tp---> channels--->..have to select INTERNAM. OR Administration--->Listening channels--->Have to select INTERNAL)-- Please let me know where i have to configure outbound
    Outbound:_ This the channel where you want the B2B to pick up messages and send to remote TP.
    This has to be configured via AdminServer -> Listening Channels -> Configure your Listening channel and tick "Internal" to true.
    Inbound:
    In the same way where we have to configure the INbound queues(TP1_IN_Queue,TP2_IN_QUEUE, TP3_IN_QUEUE, TP4_IN_QUEUE).
    Inbound:_ From what I understand, after processing messages received from Remote TP, you want B2B to pass messages to this channel.
    To do that-
    1.you need to configure the channel in Partners->Host->Channels-> Configure the channels here and ensure that the *"Internal"* property is set to true under the channel attributes.
    2. In the inbound agreement, use the channel by using the drop down box under the Host found in bottom left corner.
    Thanks,
    Varun

  • How to create the Queues

    Please find the below scenarios
    1) R/3(A system ) -
    >Client PI--->Server PI---->File1
    2) R/3(B system) -
    >Client PI--->Server PI---->File2
    In the above scenario the data transfer between through HTTS soap communications. While receiving the data at Server PI end, we have used the QOS=EOIO and we have used the Queue XBQI_22. This Queue has been used for the First scenario.
    Here my doubt is, shall i use the same Queue for the 2nd scenario also? If I can, who will create the Queues( means Queues will be created by PI Developer or Basis Person).
    If possible plz provide me the steps, how to create the Queues.
    Thanks in advance,
    Regards,
    AVR

    Hi AV,
    Go thru following blogs....it will help you to play around with queues...
    XI Asynchronous Message Processing: Understanding XI Queues -Part I
    /people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
    How To Prioritize XI Messages on the Integration server
    IN this u will come to know how to priortize message using the Queus.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/59e837d3-0201-0010-c096-dc1869733413
    Also have a look on the following link...
    queue registration
    With Regards,
    Pinangshuk.

  • How to create a queue using CVP with ICM script(Comprehensive mode)

    Hello Guys,
    I would like to know how can I configure a queue in a comprehensive mode using micro-app at CVP + ICM environment. I work with UCCE at least 2 years, so I know how to create a queue using UCCX and/or IPIVR (I do a queue application using UCCX Editor and at ICM I use the Run external Script component), but at CVP I don't know how to create a application at Call Studio and how to call this application at ICM Script Editor to run this queue if there aren't agents available.
    Can someone help me to understand how can I do that?
    I attached the ICM Script using micro-app. This script runs ok, I call to a Route pattern and CVP route request ICM, so ICM run the script, but if there are no agents available the call drops, so I would like to know how can I create a queue to hold the call and to come back to a available agent.
    Regards,
    Eric Zapparoli
    Unified Communications
    Wittel

    Out of the check mark in the queue to skill group node you go to another run external script node, then you loop into that over and over again until the call is answered.
    david

  • How to flush Delta queue for future SAP upgrades/support pack !

    Guys,
    I'm making documentation regards to " How to flush Delta Queues" in case SAP wanted to upgrade the system or any support pack. Please anyone let me know the effective way to flush out the delta queue in step by step methods. I really appreciate your help.

    1.  Run V3 for associated application(s), this will load any potential delta data to the delta queues.
    2.  Run the delta load for each datasource twice.  The second load will clear the delta repeat data so that there should not be any more data in the delta queues defined with the format of the current datasources.
    Does this help?

  • How to bundle all files and directories in a package?

    how to bundle all files and directories in a package?
    i plan to put all image files, .class files and some other files together.and then double click the package to execute the program.
    should i use jar?is there a link for tutorial or example?
    thanks in advance

    http://java.sun.com/docs/books/tutorial/jar/

  • How many types of Queues exists and how to identify them.

    Hello
    can anyone say How many types of Queues exists and how to identify them.
    What does R3R* and CSA* stands for.
    Regards,
    divya

    Hi Divya,
        The queues R3* and CSA* that you have specified are qRFC queues. qRFC queues are data queues which transport data to and fro different systems.
    There are also the tRFC queues which are triggered whenever you make RFC calls to connect to another system.
    Queues with prefix R3AD* - for delta download from R3->CRM
    Queues with prefix R3AU* - for data upload from CRM->R3
    Queues with prefix R3AR* - used to transfer data during request load from R3->CRM
    Queues with prefix R3AI* - for initial load from R3->CRM
    Queues with prefix CSA* - these are validation object specific queues used for processing/persisting data in CRM tables in a serialized manner. E.g. CSABUPA* for business partner,CSA_ORDER* for sales order etc.
    You can administer and monitor the queues in trax. SMQR,SMQS.
    Hope this helps you! Pls. do not forget to reward me some points.
    Regards,
    Sudipta.

  • How to manage jms queue?

    How to manage jms queue. I want to do operation on messages on jms queue like deleting the messages and hold the message for some time . Please provide the sample code for that.

    Thanks a lot Tom for the reply, I have read about the descriptor setting 'max-beans-in-free-pool' and I searched this concept at the Administration Console without success.
    I suppose other way is create a “Session Pools” under the JMSServer, and then create a “Consumer” and define the setting “Messages Maximum”. One of the disadvantages is that “Session Pools” don’t support JTA, from the documentation:
    +Session pools enable an application to process messages concurrently. Session pools are now used rarely, as they are not a required part of the J2EE specification, do not support JTA user transactions, and are largely superseded by message-driven beans (MDBs), which are a required part of the J2EE specification.+
    I continue reading the MDB chapter of the performance and tuning guide in the documentation, thanks for any contribution to the topic.
    Lucas.

  • How to measure un-queued requests

    Hi.
    We have a web logic application that has to serve a lot of throughput.
    To prevent timeouts on the client side, I configured it so that the work manager that takes in the requests is limited to a certain amount. The max-threads is configured comparably to the DB pool capability, and the limit is set in such a way so that we prevent the server to queue requests. Queuing proves deadly for us, as by the time the request actually makes to the executor, the client is gone.
    The problem I'm seeing now, is that there doesn't seem to be a way to actually measure how many requests have been turned away. The only suggestion I got so far was to look into access logs, but I actually had to turn them off, as they are a performance issue on themselves, with the volume of requests we are having.
    Knowing how many requests are falling off is relatively important, so that we can understand when there is time to add more app nodes.
    Thanks!
    Pawel.

    Hi,
    You may please check the configuration part of SLA. This might help you : http://www.renet-web.net/2009/07/21/slas-made-easy-in-sap-solution-manager/
    The 'Date of first response' is the time when message is taken for processing  and the other one is the time when message truns to have the status 'Finished or Resolved'.
    If you are intended to build a program to determine the time for the different status changes, you might be intersted in checking the Extras--Change Documents in your message.
    Rajeev

  • How to bundle java help class into jar file ?

    Hi, all,
    I have some package in my project, with which I have a java help jar file as classpath, when I run my project, I need the jh.jar file in directory /jar/jh.jar.
    Now, I bundled all my class packages into a jar file, my.jar, together with the /jar directory. When i run my jar file with command:
    java -jar my.jar
    It tells me couldn't find javahelp class.
    What shall I do? How can I create my jar file with the jh.jar?
    Thanks in advance.

    I think you'd be better off just adding the jh.jar as
    a classpath argument and running it like that:
    java -classpath /myjavalibdir/jh.jar -jar myjar.jar
    ...otherwise you're stepping into redistribution of
    binary issues licensing-wise. That won't work either; when you run java with the -jar option, it ignores both the -classpath option and the CLASSPATH environment variable. However, it will see jh.jar automatically if you put it in the <path-to-java>/jre/lib/ext directory. But for distribution purposes, it might be simpler just to combime the contents of jh.jar into myjar.jar (if you use Ant, its <jar> task makes that very easy). Or, you can just run it this way:java -classpath myjar.jar;jar/jh.jar MyMainClassBTW, I don't think redistribution is a problem; otherwise how anyone even use JavaHelp?

  • How to get back Queue name in SMQ1 when Data source is present in RSA7

    Hello Friends,
      Its very urgent issue.Please provide me your valuable solutions.
    1) I have Queue name in SMQ1 and Data source name in RSA7 are present for particular Data source in CRM source system. I deleted Queues in SMQ1 and they present in RSA7 so whenever I do changes in Data source record that changes i can see in RSA3 and DB table but I can't able to see that changes in RSA7.
    2) That Data source is Delta enabled and Initialization also set for that.
    3) when i do delta scheduling no records are coming in BI side.
    Please tell me how can i get back my Queue in SMQ1 and get changes reflects in RSA7 data source also.

    Try below:
    http://sharepoint247.wordpress.com/2013/05/24/handy-email-utility-for-any-sharepoint-project/
    interface IEmailConfigurationManager
    /// <summary>
    /// Gets Email Template by it's ID
    /// </summary>
    /// <param name="emailTemplateId"></param>
    /// <returns></returns>
    EmailTemplate GetEmailTemplate(string emailTemplateId);
    /// <summary>
    /// Gets Email Template by it's ID by updating the email template properties
    /// </summary>
    /// <param name="emailTemplateId"></param>
    /// <param name="subjectProperties"></param>
    /// <param name="bodyProperties"></param>
    /// <returns></returns>
    EmailTemplate GetEmailTemplate(string emailTemplateId,
    IDictionary<string, string> subjectProperties,
    IDictionary<string, string> bodyProperties);
    /// <summary>
    /// Add new email template.
    /// </summary>
    /// <param name="emailTemplateId"></param>
    /// <param name="emailTemplateSubject"></param>
    /// <param name="emailTemplateBody"></param>
    void AddEmailTemplate(string emailTemplateId, string shortDescription,
    string emailTemplateSubject, string emailTemplateBody);
    https://spemailutility.codeplex.com/
    http://social.msdn.microsoft.com/Forums/en-US/ef945d33-50c5-4b89-8bb9-32a95498b419/how-to-change-email-template-for-the-approval-workflow?forum=sharepointcustomizationlegacy

Maybe you are looking for