How to burn to DVD in Premiere Elements 8 to play on DVD recorder.

I'm using Premiere Elements 8 with Windows 7, quad core i760 and 8 GB RAM. When I burn a project to disc, it will play on this PC but the disc is not recognised on my XP PC nor by my DVD recorder. My guess is that I'm burning as an HD DVD but can't see any way of changing this. Can anybody point me in the right direction please?

Geoff, I think you're chasing the wrong issues. The least likely problem is that Premiere Elements is producing unreadable discs.
Have you burned your DVD files to a folder on a hard drive rather than directly to a disc?
Have you tried using DVD-Rs or DVD+Rs rather than DVD-RWs (which many DVD players can't read)?
Your source files -- no matter where they come from -- will have no effect in how your DVD plays. Once it's all been transcoded, it's a matter of your disc player reading your disc. If that's not happening, you need to troubleshoot whether this issue is a problem with the discs themselves, a problem with your DVD player or a problem or a problem with your burner.
Burning to a folder on your hard drive will eliminate Premiere Elements as the cause of the problem. If the program can produce a VIDEO_TS folder full of VOB files, then you know the problem is either in your discs or your hardware.

Similar Messages

Unknown error 2130906112 while burning DVD in Premiere Elements

Hi am trying to burn a DVD using Premiere Elements 3.0. My computer will go through the lengthy process of attempting to burn the CD. At the very end, the drive pops the DVD out and I get a message that states: Unknown error 2130906112. I have burned successfully in the past, but am unable to now. I have tried to do this about 7 times with this specific project and have had no success. I have used two different types of DVD+R (Memorex and Verbatim). My project is approximately 56 minutes long. Any help and/or advice is greatly appreciated!!!!

Great news!
I just can't see which is highlighted while doing so. I think it has to do with the template I chose in Premiere Elements while designing the movie.
The lack of the Sub-picture Highlights (the official name for the indicators of which Button one has navigated to), could be caused by several things:
1.) the inability of the PS3 to adequately display them. Like I said earlier, most people, that I know, use the PS3's for BD playing. The specs. are different for those, as opposed to the DVD-specs. I just do not know about the PS3.
2.) could be a problem with the Template. Which one did you choose? I'll be glad to check it out (if PrE4 has it) and report any issues that I find. Did you modify this Template, say in Photoshop/PSElements? Could be that one of those modifications turned ON all Sub-picture Highlights.
3.) could be a problem with the "authoring" phase of the Project. This is after the editing, and is where one assembles the Assets (Menus, etc.) and does the navigation. As PrE is semi-automatic, it does most of this for the user, with little intervention. Still, there could be ways to accidently mess something up here, though it's highly unlikely. Now, in my authoring program, all is done by hand, so I have hundreds of opportunities to make a mess of a Project - PrE shields the user from most of these.
Now, to your questions:
Can I use the Img software for all burning projects including CDs?
Yes. You can do most forms of burning, including CD's (Audio, Video or Data), so long as you have the right types of files.
What is the best way to organize and store my video files?
This is the $64,000 question. So much depends on what one has, how they are likely to need to access them and what equipment they either own, or wish to purchase. I'll give you my scheme, though it might be overkill for you. Still, you can get an idea and are free to adapt any part of it for your needs.
I work with several types of Assets: original (or stock) still images, Captured (stock, or client-supplied) motion, Audio (original, stock or extracted from the previously mentioned motion Assets, Menus (Templates and original creations), Titles (same) and then my Projects.
I keep the originals on both a NAS (Networked Attached Storage) drive that is networked to all of my computers, and also on external storage HDD's. I also back up to DVD-Data discs. For Captured, original Video, I also store all tapes and do NOT overwrite/reuse any. I only work with Copies of any of the Assets (the Captures are probably the exception, as I have the tapes, should I need to re-Capture).
I use several media browsers to organize my Assets. I then locate those necessary for a Project, and create a folder structure for that Project. Copies of the Assets are placed in that folder structure, beneath the Project name. Again - these are Copies, in case something happens.
Depending on what I need to do, the Scratch Disks (set with Edit>Preferences) are usually kept within the Project's folder structure too. Same for Exports. As I use a different program to author DVD's (Adobe Encore), I create my Encore Project within this structure too. The files that I Export from PrPro (my NLE of choice), are the ones that I then Import into Encore for authoring the Project.
When done, I Archive the editing Project and also the Encore Project, to another external drive. I will always make one additional copy of my output DVD as a backup, as I can use ImgBurn, or another utility, to Copy DVD.
After all of this, I can then safely Delete my entire Project folder from the system. Remember, it contains no origianl Assets (other than Captured materail), as I have everything on the NAS, plus an external, plus the backup DVD-Data disc. Right now, I have about 30 1 - 2TB external HDD's that I use. Some are for backup, and some are to allow me to move my Projects between my laptop or my workstation.
Hope that this helps. As I said, it's probably overkill, but much of the work that I do is for clients. If they come back with a change, or a problem, I want to be able to help them immediately.
Good luck and good questions,
Hunt

Burning dvd with premiere elements 11

I burn video files on to dvds. I always key NTSC widescreen. Sometimes, the image fills the tv screen. Most of the time however, there is a 2" wide black border around the image, between the image and the edge of the tv screen. How do I get the image to fill the tv screen?

Thank you for responding to my problem. I'm afraid the reading didn't help. All of my 20 files were created with the same camera, the same project settings, the same equipment, etc. But when I burned each of them to their own dvd disc, a few of the programs filled the frame on the tv down the hall. Most however, have a 2" black border around the image. It makes no sense to me.
Date: Sun, 10 Mar 2013 10:32:25 -0700
From: [email protected]
To: [email protected]
Subject: Burning dvd with premiere elements 11
Re: Burning dvd with premiere elements 11 created by John T Smith in Premiere Elements - View the full discussion
Some reading that may help... what you describe SEEMS like a mismatch between your video and your project
Online User Guide http://help.adobe.com/en_US/premiereelements/using/index.html
-Page to download current PDF http://helpx.adobe.com/premiere-elements.html
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086
Saving & Sharing http://forums.adobe.com/thread/1137128
-Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
-Sharing for Movies http://forums.adobe.com/thread/1051093
-Sharing for Computer http://forums.adobe.com/thread/1058237
Steve's Basic Training Tutorials... steps are the same for several versions
-http://forums.adobe.com/thread/537685
-v11 http://www.amazon.com/Muvipix-Guide-Premiere-Elements-version/dp/14793 11200/
-All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/14 51529724/
-and http://forums.adobe.com/thread/498626
-and http://prodesigntools.com/four-hours-free-video-tutorials-new-photosho p-elements-9-pse9.html
-and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-prem iere-elements-7-and-8.html
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_ faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_ tips
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5136593#5136593
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5136593#5136593
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5136593#5136593. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

When I try to burn a DVD in Premiere Elements 12 I get an Internal software error%0, line %

When I try to burn a DVD in Premiere Elements 12, I get an Internal software error %0, line %1. This is the first time that I have tried to use this program.

As suggested in the original reply in January, you will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Can't burn a DVD on Premiere Elements 12

At 98% media encoding the DVD is spit out and I get the following: internal software error:/premiere/elements/molecules/pre-mediacore/External/AuthorScript/Source
Any suggestions? I need the video for a class this week!

ATR,
Thank you for the reply and suggestions. I did some more researching and found a suggestion to remove the stop marker at the end of my video....and it worked! Apparently the stop marker causes an internal error. Mystery solved.
Thank you again for the ideas. I'm going to keep them on file for the next burn hic-up.
ibed
Date: Sat, 11 Jan 2014 22:12:58 -0800
From: [email protected]
To: [email protected]
Subject: Can't burn a DVD on Premiere Elements 12
    Re: Can't burn a DVD on Premiere Elements 12
    created by A.T. Romano in Premiere Elements - View the full discussion
ibed
What computer operating system is your Premiere Elements 12 running on?
Is this an external or internal burner?
Would you say that this is a case of "it worked before but not now" or "it never worked before"?
Although you cannot burn to disc DVD, can you burn your Timeline to folder. If so, the VIDEO_TS Folder from the burn to folder + ImgBurn to get your DVD-VIDEO on DVD disc may be your answer to this time crunch.
Let us start here and then decide what next depending on your answers.
Next step may be getting more information about your project settings and properties of your source media.
Could you post a screenshot of the error message that you are getting?
More details in the morning when we will be watch for your follow up.
Thanks.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6004504#6004504
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6004504#6004504
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6004504#6004504. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

Hi Steve,
Thanks for your quick response. The original movies were taken on a Canon ES970 (1990's). I don't know the resolution but things were not as high tech back then.,.. I used a Roxio software to convert them on my MacBook Air. I didn't realize that I could use Adobe Premiere Elements to do that or I would have. However my old camera did not have a cable to attach it to a computer and the Roxio software came with it.
I then saved the recordings on an external hard drive. I did not make movies from them using iMovie or edit them in any way. They are simply .MOV files and they can be played on my Mac. Upon realizing how much memory it takes to work on videos, I decided it might be easier to burn DVD's on my husband's new Dell desktop that came with Windows 8. I downloaded Quicktime as suggested and still the movies can't be added to Premiere.

Import Billingual DVD to Premiere Element 10

i tried to import a billingual (Cantonese/Mandarin) DVD into Premiere Element 10. However, it only shows with Mandarin channel instead of Cantonese. How could I import it with Cantonese?

Welcome to the forum.
To extract the supplemental Audio Stream (Cantonese, in your case), you will likely need to completely rip the VOB's, outside of PrE.
Not sure which current ripping software is good for this, but this old Encore FAQ lists some that were pretty good, in their day: http://forums.adobe.com/thread/423743?tstart=0
Others will likely have some favorites, and might know which ones do the best with supplemental Audio Streams, but I do not. I see recs. for VideoRedo, ReJig, and others, but have zero experience with them, and do not know their capabilities.
Good luck,
Hunt

On how many computer can I install Premiere Elements (one licens)

On how many computer can I install Premiere Elements (one licens)

number
What are the computer operating systems involved? Are you installing from installation files (from online download purchase) or from installation disc
(from purchase in boxed packaging)? Answers to those questions would probably get you the best possible answer to your question.
If installation files.....
You are not going to be able to install a Premiere Elements Windows purchased serial number on a Mac computer or a Premiere Elements Mac
purchased serial number on a Windows computer.
If installation discs...
Box packaging typically comes with two installation discs....one for Windows and one for Mac. In this type of situation, typically you use one
serial number for them both. If that is the case, then the following applies...
Adobe allows you to use the same purchased activated serial number on no more than 2 of your computers. And, you do not use them at the same time.
If you are dealing with two computers with the same operating system, then you should be able to use that same purchased serial number for that operating system on no more than 2 of your computers. Again, you do not use them at the same time.
Please let us know if any questions or need clarification.
Thanks.
ATR

How do I re-install adobe premiere elements on the same computer? Original installation had error -

How do I re-install adobe premiere elements 11 on the same computer. Original installation had error - missing dll file.

What computer? What exact error? Details are everything...
Mylenium

How to get audio into Adobe Premiere Elements 12?

How to get audio into Adobe Premiere Elements 12?
I have filmed an air show with a very good camera JVC pro
And when I pick up the clips in Adobe Premiere Elements 12, it works too, but only without sound.
I think I tried everything for 4 days now.
Sound in my computer works perfectly
I go to where the video files are located and try to run them in VLC or in Nero Kwik so it works fine with both audio and video.
I have checked the sound card.
Yes, I have tried everything so now I'm so tired of this lousy so I'm ready to throw this program at the dump.
It's not normal if you will keep on producing audio for over 4 days at Adobe
The old Elements 9 worked fine. Offer some of would consider developing it again. I do not know how I should do.
My name is Thore Hult
live in Karlshamn in Sweden

Thore Hult
On what computer operating system is your Premiere Elements 12 working on? Have you updated it from 12 to 12.1 Update using an opened project's Help Menu/Update. If not, please do so.
For your immediate problem.
What is the model/settings for the JVC camera that recorded you video. I want to get at the properties of your source video including the file extension.
Since you are getting video, but no audio, please download and install the free codec utility named GSpot to see what is shows
for your Audio Name and Status.
http://www.headbands.com/gspot/
The other properties of the file there would also be of interest.
When you import your source file into the project, do you see any "conforming" activity going in a progress bar at the bottom right corner of the workspace?
If so, do you wait for it to complete before you move forward in the project?
Can you get sound in any of your Premiere Elements projects with this current JVC file or other?
Can we assume that your troubleshooting has included checking
a. Volume control within the project
b. Edit Menu/Preferences/Audio Hardware ASIO
Let us start here and then we can decide what next if necessary.
Thanks.
ATR

Pretty basic this, but I'm a total beginner. Can anyone tell me (in simple steps!) how I burn a movie I bought in iMovies onto a DVD? After I stick the DVD in, what happens then? Sorry about the unsophisticated question. Thanks.

Pretty basic this, but I'm a beginner. Can anyone tell me (in simple steps!) how I burn a movie I bought in imovies onto a DVD? After I stick the DVD in, what happens then? Do I have to be in my itunes library first? Sorry about the unsophisticated question. Thanks!

Hello Jackie! (My brother lives in Brussels!)
You may find these helpful:
iMovie tutorials:
http://www.apple.com/ilife/tutorials/#imovie
and also this:
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
A good guide to iDVD 7 can be found here:
http://www.kenstone.net/fcp_homepage/idvd_07_stone.html
Apple's tutorial on iDVD 07/08 is here:
http://manuals.info.apple.com/en/idvd_08_getting_started.pdf

I have premiere elements 13 perchased on dvd.

I have Premiere Elements 13 purchased on DVD
installed on a imac.
I can not activate my product ,message :can not activate this serial

Error "The serial number is not valid for this product" | Creative Suite

How do I correct the error; "PluginCoder error: no pligin DLLs" when attempting to burn a DVD with Premiere Elements 13

I just upgraded to PE 13 - removed PE12 prior to installing PE13 and now I cannot burn a DVD on my Win 7 Pro 64bit PC. In my first attempt at burning a DVD PE 13 did not see the DVD burner - drive "z:". I have a WD MyBook 4TB USB HD and had Security configured which created a Virtual CD on the drive. I disabled the virtual CD and rebooted. This time PE13 recognized the DVD burner but when trying to burn a DVD I received the No DLLs message and had to cancel the burn. I tried the burn again and the DVD burner was no longer recognized.
I then removed PE13 and reinstalled it - no errors during the install. Tried again and same result - no DLLs.
Any help would be greatly appreciated.
Thanks for your time,
Mark

PRE_help
For Premiere Elements user, I would make note that the presets for burn to disc cannot be customized by the user within the program.
a. The second thread that you pointed rkclarke36 to does talk about resolving this issue by changing the burn to disc frame rate from
24 fps to 30 fps. But, that was for Premiere Pro, not Premiere Elements. In Premiere Pro, can the user really customize an Adobe burn to disc
preset?
For Premiere Elements
If the burn to is to DVD disc for DVD-VIDEO, the user is
confined to two frames rate, 25 interlaced frames per second or 29.97 interlaced frames per second. But, he/she cannot change the frame rate
within the preset.
If the burn to is to DVD disc for AVCHD DVD, the user again meets different presets, but cannot change the frame rate within the preset. For Premiere Elements 13 burn to AVCHD disc, the presets are
Premiere Elements 13
H.264 1440 x 1080i NTSC Dolby
H.264 1440 x 1080i PAL Dolby
H.264 1440 x 1080p NTSC Dolby
H.264 1920 x 1080i NTSC Dolby
H.264 1920 x 1080i PAL Dolby
H.264 1920 x 1080p NTSC Dolby
Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
b. Mark has not yet offered the details of the Timeline content (video and/or stills) being taken to burn to DVD-VIDEO or AVCHD DVD. So, frame size as per your first mentioned link might be an avenue to pursue. I would include that with all my testing of Premiere Elements 4 to 13, I have not gotten this particular dll error
with any oversized stills.
ATR

How to burn my Video to a DVD in Premiere Elements 7?

I have a
video of my son's Basketball team and I save it
on my Hard Drive thru Premiere Elements.I did make it a
project. I now want to burn it onto a DVD and don't want
anything more such as timelines and or screen lines.
Can someone step me thru the process?
Thank You

THEVIDEOKID
We have a lot of details to sort through systematically to get your the DVD-VIDEO that you want, but let us try some preliminary questions and answers to get started:
a. The file that you clicked on to open your video in the Premiere Elements 7 Timeline...did it have a file extension of .prel? That is the file extension of a Premiere Elements project.
b. When you started that project, did you set it up for NTSC DV Standard or Widescreen or the PAL counterpart?
c. If you are working with the project.prel, when you open the project.prel, do you see your video on the Timeline? Does it play back in the Edit Mode Monitor if you hit the Play button of the Edit Mode Monitor?
d. When you get to Share/Disc/Disc, what preset did you set...NTSC Standard or Widescreen or the PAL counterpart?
e. After you have hit Burn in the Burn Dialog and during the encoding burn, the image in the Monitor stays at the image where you left the Timeline indicator back in the Edit Mode....nothing changes there, except maybe the image will dim during the encoding/burning process.
f. IMPORTANT...do you get a message saying the the burn to disc has been successfully completed, followed by the DVD burner tray opening?
g. If so, put the DVD back in the burner tray, go to My Computer/DVD drive. Right click the DVD drive and select Explore. Do you find content of two folders, one named OpenDVD and the other VIDEO_TS?
Where are you trying to play back the DVD-VIDEO that you believe that you created?
ATR

How to burn to DVD in Premiere Elements 8 to play on DVD recorder.

Similar Messages

Maybe you are looking for