How To Buy Flash Media Enterprise Server

Hello,
How can we purchase FMES 4 Licenses?
Our startup urgently needs it
Adobe representatives are not getting back to us
Andrey

Adobe is selling its products through the channel - i.e. distributors/resellers. So you should visit "where to buy" section of your local adobe portal to check which resellers work on your territory.
If you are in Russia or CIS you may contact us ([email protected]) as we are integrating these kind of products here.
Thanks,
Denis.

Similar Messages

Stratus/Flash Media Enterprise Server 4

I see the new Flash Media Server products have been released and Flash Media Enterprise Server 4 includes support for RTMFP... Will Stratus continue to operate? Is it known how long Stratus will be available?

Hi,
Flash Access will work delivered via FMS over RTMP.
Flash Access should work over an RTMFP client-server connection -- by default it's exactly the same as RTMP as far as functionality, unless you're in "live unbuffered" mode, which you probably wouldn't be for a client-server streaming scenario with Flash Access protection.
However, if you mean "P2P multicast", then that is not a supported scenario.
cheers,
/Eric.

Who can tell me flash media Flash Media Enterprise Server 4 (p2p) with flash access

flash access support flash media Flash Media Enterprise Server 4 (p2p) ?

Hi,
Flash Access will work delivered via FMS over RTMP.
Flash Access should work over an RTMFP client-server connection -- by default it's exactly the same as RTMP as far as functionality, unless you're in "live unbuffered" mode, which you probably wouldn't be for a client-server streaming scenario with Flash Access protection.
However, if you mean "P2P multicast", then that is not a supported scenario.
cheers,
/Eric.

How to secure Flash Media Streaming Server 3.5 (live stream connection)

I have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.
All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?
How can I setup the server to require a user and password to stream live media to the server?
Any help would be great, I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.
I am using the Adobe FMS Apache install, what files need changing?
I have the following files:
/opt/adobe/fms/applications/live
total 44
-rwxr-xr-x 1 fms fms 1035 Jul 27 14:52 allowedHTMLdomains.txt
-rwxr-xr-x 1 fms fms 992 Jul 27 14:52 allowedSWFdomains.txt
-rwxr-xr-x 1 fms fms 1550 Jul 27 14:52 Application.xml
-rwxr-xr-x 1 fms fms 4371 Jul 27 14:52 main.far
-rwxr-xr-x 1 fms fms 2292 Jul 27 14:52 readme.txt
I want to lock down a person from connecting to the server on the public internet and starting a live stream?
Can this be done with a user name and password?

If you are concerned about anyone starting publishing to your stream then we have security update on this. Please upgrade to 3.5.4 and now you can use FMS Authentication Add-in (used with FMLE as publisher). If you are facing problems with publisher which are not FMLE, please enable SWF Verification so that only valid SWF's connect to your FMS.
You can find 3.5.4 update here : http://www.adobe.com/support/flashmediaserver/downloads_updaters.html
You can find FMS Authentication Add-in on FMLE Download page: https://www.adobe.com/cfusion/entitlement/index.cfm?e=fmle3 (when you click on Agree - it will prompt for your Adobe ID - then when you reach Download page - you will get Optional Download of Authentication Add-in)

Flash media interactive server with redhat enterprise linux ?

Was wondering if anyone was having issues trying to install
the flash media interactive server on a RedHat Enterprise Linux
machine. It seems that the installer that is packaged with the
program in incompatiable. If so what are you doing to get the
server installed? Thanks for any help

i check the dependencies and noticed that there was one that
was not satisfyied " libasneu.so.1 as it was link to nothing. After
moving the file to the /usr/lib and running the ldd command on the
fmsmaster file i was then able to see the link between the two.
When I try to install the program again I recieve the same error
message
"no package installFMS available"- this happens when i try
using yum to install the program or
ERROR: your distribution, unknown, is not supported by this
Adobe Flash Media Server installer. - happens when ./installFMS is
ran.
anyone else know of any other tricks to get this installed ?
Thanks again for everyone help on this issue.

Adobe Flash Media Interactive Server 3.5

Hey, I am thinking about making a web site that streams HD movies and videos that I have created myself. I was wonder could you use Adobe Flash Media Interactive Server 3.5 to do so I know i would have to buy a dedicated server and a fast one with a good load of bandwidth. The big question am asking is that can you base a website or content management system around the interactive server.

FMS isn't reall suiatable for serving a website or CMS. I suppose you -could- use the included Apache installation to handle your HTTP traffic, but it would require installing a database, an application server, and whatever else you would need. You'd then need to maintain the installation yourself... FMS doesn't have any sort of package manager to handle updating Apache or anything else you might want to attach to it.
I think you'd be better off using a package manager like Plesk or Cpanel, and let it take care of your httpd server and supporting services. My advice is to just use FMS for purposes that specifically call for it.

Flash Media Streaming Server HLS video

Hi,
I have Flash Media Streaming Server License and I want to learn that whether it has HLS capability? Are there any cheatsheet just spesific to Streaming Server? because every where all the information is given for all the Media Server family bu I want to learn just Streaming Server's capabilities.
Thank you very much...

You can find details here about each edition : http://www.adobe.com/products/flash-media-server-family/buying-guide-comparison.html

Java Client for Adobe Flash Media Streaming Server

Hello
Is it possible to connect to a Adobe Flash Media Streaming
Server by a java client?
I need to be able to receive a streamed RTMP flash-video and
implement the following functions:
- PLAY
- PAUSE
- STOP
- GO TO A SPECIFIC POSITION
I need to implement this player on a non-top-level Swing
JComponent in Java (because this is the restriction I have from
sun's wonderland, where I want to implement this player)...
How can I do that in Java? Are there any code examples
available or do you know an API or other possibilities to do that?
Thanks for you help.
Kind regards,
Peter

This is a pretty big question. Is it possible? Probably. In
theory it should. But *normally* the client is based on the flash
player. I believe the protocol is publically available if you want
to roll your own.
But if you are looking for readily available solution, there
is none that I know of.

I can not find my license "Adobe Flash Media Interactive Server 4.5 - Full License" in my page ID

i bought a "Adobe Flash Media Interactive Server 4.5 - Full License - English" two years ago. Now i'm trying to download my product, but my product list is empty. Why? How can i download my product?
Order Number: 8751785443
Best regards,
Simone.

You'll need to contact Adobe Support directly using chat or phone to try to resolve this.
Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/

DVBViewer RS + Flash Media Streaming Server

Hi Ich frage jetzt mal da Google mir noch nicht geholfen hat weiß einer wie ich von DVBViewer RS zu mein Flash Media Streaming Server senden kann oder wie ich den Flash Media Streaming Server einstellen kann das er die Daten vom DVB Viewer RS Empfängt bitte helft mir ich bin am verzweifeln
LG Trini

You can find details here about each edition : http://www.adobe.com/products/flash-media-server-family/buying-guide-comparison.html

Flash media Encoding Server

I heard that Adobe has launched a new server reffered to as Flash media Encoding Server. In their website they do have explained a lot about it. But they have not mentioned whether it can be used for Live Streaming or not. Does any one know whether it can be used for Live Encoding .. anyone?? How is this server different from Flash Media Server??

Jay is correct - Flash Media Encoding Server is a companion product to Flash Media Server that will encode/transcode files to Flash friendly formats for delivery via Flash Media Server or other forms of delivery. It is not meant for live capture and encode - simply for preparing VOD files for delivery. For more about encoding for Flash and the various Adobe and products in this space for both Live and VOD - you may want to read an article I wrote on our developer center.
http://www.adobe.com/devnet/video/articles/video_encoding_ecosystem.html
Laurel Reitman
Sr. Product Manager

RTMP & Flash Media Streaming Server Live application

I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.

Now with so many publishers being present its not that trivial to
design single module which would suffice for whole set of
publishers.And according to me blocking all publishers right away and
just allowing FMLE using this plug-in might not be best solution. So it
is best left to the onus of one who is building solution to customise
things according to his own needs.
Bear in mind that not everybody is using FMIS. Users of FMSS didn't buy this product with the expectation of having to build applications and develop plug-ins (in fact, in the case of the former they explicitly cannot do so) - they bought it so that they could have a streaming server. As far as users of FMSS are concerned, I would think, the solution has already been built - by Adobe - and it's been found to be lacking a very basic element.
As it stands, even the authentication add-in that was developed for use with FMLE clients provides no security whatsoever. It would need to be modified in such a way as to permit access only to FMLE and block other client software before it served any useful purpose.
So yes, what I think would be useful would be a change at the protocol level / on the server side. An option to prompt all clients for credentials and allow or deny them access based on their response would be useful. Otherwise server admins will have to know about each and every piece of client software that may wish to publish a stream to their server and then . . . what - make modifications to their authentication module every time a new client pops up? Yes, a central, standard authentication system (like what is employed in pretty much every other client-server system that makes provisions for the requirement of authentication) makes a lot of sense.

Upgrade from FMS 3.5 to Flash Media Interactive Server no apps working

I sucessfully upgraded from FMS to FMIS. In the Admin it shows that the license is now Flash Media Interactive Server r405 I believe.
The live and vod services continue to work as expected.
On a separate development server I have developed a number of applications that I want to move to the new production server. Nothing connects at all on the new server. In the Admin, all the applications show as being available.
Is there something I need to do to make it work?
I don't want to post details on line but willing to share if someone can help out?
Boss really wants to make the $4000 upgrade work if you know what I mean...

Thank you. If you don't mind, I would prefer to do it here although I am
happy to post the final results for the thread. I used to work at MM
and Adobe before that so I think there is great value in one to many
support.
1. How did you upgrade - using license file or license keys - i suppose license key?
License key. Just copied and pasted into the server admin's license screen.
2. Did you restart your server after putting in the serial key? If not , please restart, for licensing changes to take place, you need to restart the server.
Yes. I did, but I did it from the admin, not the start and stop applets.
3. If you have restarted and you are facing same issue - can you check your logs and see what error messages are you getting, you can check edge.00.log,core.00.log and master.00.log.
This is from the Edge.log. I am not really sure what it says, but it
coincides with when I entered the key.
#Version: 1.0#Start-Date: 2010-08-03 07:11:16
#Software: Adobe Flash Media Server 3.5.0 r405
#Date: 2010-08-03
#Fields:
date     time     x-pid     x-status     x-ctx     x-comment2010-08-03     07:11:15     52 36     (i)2581250
Edge disconnected from core (9412).     -2010-08-03     08:51:40     5236     (i)2581252
Registering core (11384).     -2010-08-03     11:37:14     5236     (i)2581250
Edge disconnected from core (11384).     -2010-08-03     11:37:31     5236     (i)2581252
Registering core (12104).     -2010-08-03     17:06:16     5236     (i)2581250
Edge disconnected from core (12104).     -2010-08-03     17:06:16     5236     (i)2581250
Edge disconnected from core (5264).     -
#Date: 2010-08-03
#Fields:
date     time     x-pid     x-status     x-ctx     x-comment2010-08-03     17:06:38     60 80     (i)2581173
Host: C29527-121731 IPv4: 10.0.0.2     -2010-08-03     17:06:38     6080     (i)2631174
Listener started ( defaultRoot_edge1 ) :
localhost:19350/v4     -2010-08-03     17:06:39     6080     (i)2631174
Listener started ( defaultRoot_edge1 ) :
80/v4     -2010-08-03     17:06:39     6080     (i)2631174
Listener started ( defaultRoot_edge1 ) :
1935/v4     -2010-08-03     17:06:39     6080     (i)2581252
Registering core (6052).     -2010-08-03     17:06:40     6080     (i)2581252
Registering core (6120).     -
#End-Date: 2010-08-05 05:43:58
4. If I am not mistaken you have upgraded from Streaming Server to Interactive Server, am i right?
Well the name on the screen was Flash Media Server 3.5 It streams just
fine, but I get really confused with all the names of the servers frankly.
5. Also which version of FMS are you using?
3.5
Thank you so much for your help. I am trying not to have to deinstall
the server and reinstall it. If I can avoid that, please let me know.
FWIW, this is the code I used to test to see if the server was accepting
connections to an unsigned app.
package
import flash.net.NetConnection;
import flash.display.Sprite;
import flash.text.TextField;
import flash.events.NetStatusEvent;
public class FMS3Connect extends Sprite
private var nc:NetConnection;
private var rtmpNow:String;
private var msg:String;
private var connectText:TextField;
private var posX:Number;
function FMS3Connect ()
nc=new NetConnection();
nc.addEventListener (NetStatusEvent.NET_STATUS,checkConnect);
rtmpNow="rtmp://www.letsgoexpo.com/connect";
trace (rtmpNow);
//rtmpNow="rtmpe:/connect";
nc.connect (rtmpNow);
private function checkConnect (event:NetStatusEvent):void
connectText=new TextField();
msg=event.info.code;
connectText.width=250;
connectText.text=msg;
addChild (connectText);
posX=connectText.stage.stageWidth;
connectText.x=100;
connectText.y=175;
Of course it has a little SWF that goes with it, but there isn't
anything there except this.
On the development server this works and shows the connect.
Thanks for your help. I will be checking mail frequently after noon
pacific. I don't know where you are located so I guess you get mail out
whenver you can.
Matt Brown - Moss Beach Ceramics
email: [email protected]
web: www.mossbeachceramics.com
store: mossbeachceramics.etsy.com
cell: (650) 518-0250

Flash Media Streaming Server

Flash Media Streaming ServerがCreative Suite 4 Master Collectionに同梱されています。Flash Media Streaming Serverの設定の仕方、操作方法などCreative Suite 4 Master CollectionのAdobeの無償サポート（電話でのサポート）、4インシデント内で受けられるのでしょうか。通常、体験版はインストール、アンインストールなどAdobeでは無償で電話でのサポートがありますが、Flash Media Streaming Serverも同様のサポートは受けられるのでしょうか。

How to start Flash Media Encoder 3.2 from Flex application with run time parameters?

Hello ,
I'm developing the application to stream High Quality video.While streming by default camera/microphone settings the qulaity of streaming is not upto my expected level.I want to stream through Flash Media Encoder.My aim is the user login to the application.Video/audio qulaity details are retrived from shared object stored in the client machine.The login user name only gathered at run time & it will be the streaming profile name to Encoder.Once the the Encoder started the outgoing video will be come into screen to client.Please guide me How to start Flash Media Encoder 3.2 from Flex application with run time parameters(User name as streaming name) without manually start the FME?
Thanks in advance.
Regards
Sasharyuva

Hi MarcSaphiron,
Could you please send the samples?It will be much helpful to complete my
job within the deadline.
Thanks in advance.
Regards,
Sasharyuva

How To Buy Flash Media Enterprise Server

Similar Messages

Maybe you are looking for