How to bypass object between two collections in tree binding editor

We have a object structure like this one
object 1 -contains-> collection of objects 2 -contains-> object 3 -contains-> collection of objects 4
we would like to display this object structure in a master - inline table
The first object is not representative and we don't need it.
The first collection is our master level. We selected the corresponding iterator in the data control palette and dropped it into our web page as a master-inline table.
The second object is not representative and we don't need it, but it is there.
The second collection is our inline table.
So we would like to have in our table :
collection of objects -contains-> collection of objects
The Tree binding editor show the iterator we selected and we setted the first collection as the data collection definition. We were able to set the display attribute we wanted to show and setted the second object (object 3) in the branch rule accessor. This is our first rule.
iterator -> collection of objects 2 -> object 3
For the same iterator we were able to select the second object (object 3) as the data collection definition and an attribute to display (it is not relevant for us but ...). We setted the second collection (collection of objects 4
) in the branch rule accessor. This is our second rule.
Our problem is that we are not able to continue our job ...
The list of iterator don't list the iterator that correspond to the second collection of object nor the data collection definition list the corresponding collection.
Is it a way to edit these defintions directly in the page definition ?

Similar Messages

How to center object between two guides (or one guide and edge of artboard)

Simple question: how can I center an object between two guides or between a guide and the edge of the artboard?

Chris,
You may (Smart Guides are your friends):
1) Create a rectangle between the two Guides or between the Guide and the Artboard edge, by ClickDragging with the Rectangle Tool from (the desired spot) on one to (the desired spot) on the other (Smart Guides say path/path or path/page when you are there);
2) Select both the rectangle from 1) and the object, then Click the rectangle again, then use the relevant options in the Align palette.
That should move your object to the centre in the direction(s) you choose.

How to share objects between two ADF Faces servlet sessions

I gather the application scope is one way to go for sharing data between sessions in an ADF application. Are there other more generic methods of sharing data between servlet sessions?
For example, let's say we have a JDev 101.3 ADFBC/JSF app. (or JDev 11g for that matter). In this app we also register a servlet in web.xml. So two people log into this application and access this defined servlet, creating two instances of that servlet...I guess. Is there a way for those two instances/sessions to talk to each other? Pass data back and forth? Should I read about JMS? Or does application scope sound better? I guess a direct communication would be more tidy, than putting data on an application bulletin board, lilke application scope.
Any thoughts?

Hi,
Only one instance of each servlet defined in web.xml gets created, not one per user. You're right about the sessions though, one per user is created. You're right on the other parts as well I think you could use application scope to do something like that, or the data base for that matter, depending on the use case.
Regards,
~ Simon

How to get relationship between two views in the reports

How to get relationship between two views in the reports, I am doing a deletion program , it is fully relates to views , how to get relationship between them in the reports

Hi,
Please explain your question in detail...what do you want to read ?
If you want to know about the navigation links between the views then you can use APIs like
wdComponentAPI.getComponentInfo().findInWindows("windowName").getViewUsageByID("Name").getNavigationLinks();
Iterate through the navigationLinkInfo from above collection and can read the other properties .
I haven't tried the above , but it should work !!!
Regards,Anilkumar

How to check similarity between two Databases 9i & 10g after imp in 10g

Dear all,
Source
=======
OS server     ==>     HP-UX
Oracle version     ==>     Oracle 9.2.0.8
DB Name          ==>     MSST
DB total users     ==>     320
Full export in     ==>     /u02/export/Jan09.dmp
Tablespaces     ==>     SC, SC_I, SA, SA_I, PP, PP_I, AC, AC_I, SD
Destination
============
OS server          ==>     HP-UX
DB Name               ==>     CHDB
Existg DB users          ==>     20
Oracle version          ==>     Oracle 10.2.0.4
copied 9i dump file in     ==>     /u03/export
Tablespaces created same as Oracle 9i i.e;
Tablespaces     ==>     SC, SC_I, SA, SA_I, PP, PP_I, AC, AC_I, SD
I had run full import on Destination server i.e; Oracle 10g & following is the command i used:
imp system/pwd@conn_string file=/u03/export/Jan09.dmp log=/u03/export/Jan09_imp.log full=y ignore=y statistics=none
*=== Imported successfully with few errors like ====*
IMP-00017: following statement failed with ORACLE error 2299:
"ALTER TABLE "EMP_PROMOTIONS_ORD" ADD CONSTRAINT "EMP_PROMOTIONS_ORD_UK" UN"
"IQUE ("EMP_NO", "RANK_NO_FOLLOW") USING INDEX PCTFREE 10 INITRANS 2 MAXTRAN"
"S 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1) TABLESPACE "PP" "
"LOGGING ENABLE "
IMP-00003: ORACLE error 2299 encountered
ORA-02299: cannot validate (PP.EMP_PROMOTIONS_ORD_UK) - duplicate keys found
ORA-02299: cannot validate (PP.EMP_PROMOTIONS_ORD_UK) - duplicate keys found
. . importing table "EMP_PROMOTION_DETAILS" 13333 rows imported
. . importing table "EMP_PROMOTION_MAST" 725 rows imported
. . importing table "EMP_PUNISHMENT" 271 rows imported
. . importing table "EMP_REPORT_BOOKS" 60528 rows imported
. . importing table "EMP_SALARY_HISTORIES" 120871 rows imported
. . importing table "EMP_SALARY_HISTORIES_TEMP" 77044 rows imported
. . importing table "EMP_TRANSACTIONS" 96536 rows imported
IMP-00017: following statement failed with ORACLE error 2299:
"ALTER TABLE "EMP_TRANSACTIONS" ADD CONSTRAINT "TRANS_UK" UNIQUE ("EMP_NO","
" "DIR_NO", "DIR_DATE", "TRN_CODE") USING INDEX PCTFREE 10 INITRANS 2 MAXTRA"
"NS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1) TABLESPACE "PP_"
"I" NOLOGGING ENABLE "
IMP-00003: ORACLE error 2299 encountered
ORA-02299: cannot validate (PP.TRANS_UK) - duplicate keys found
Now my question is
===================
How to check everything is same/similar like Oracle 9i database ( source ), for example ( i used this technique ):
Can anyone tell me how to check similarity between two Databases 9i & 10g after import in 10g.
MSST_DB>SHOW USER
MSST_DB>SA
MSST_DB>select object_type, count(*) from user_objects group by objects;
OBJECT_TYPE     COUNT(*)
DATABASE LINK     2
FUNCTION     23
INDEX          1795
LOB          6
PACKAGE          8
PACKAGE BODY     8
PROCEDURE     30
SEQUENCE     67
SYNONYM          60
TABLE          644
TRIGGER          3
VIEW          20
CHDB_DB>SHOW USER
CHDB_DB>SA
CHDB_DB>select object_type, count(*) from user_objects group by objects;
OBJECT_TYPE     COUNT(*)
INDEX          1794
PROCEDURE     30
TABLE          644
TRIGGER          3
VIEW          20
FUNCTION     23
SYNONYM          60
PACKAGE BODY     8
SEQUENCE     67
PACKAGE          8
LOB          6
Edited by: VIKHARAHMED on Jan 10, 2012 3:02 AM

[url http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_export.htm#sthref67]Guide.

How to Persis session between two ear files

Can anybody tell me how to persists session between two ear files?
Please Help its urgent!!
Rahul

Rahul -- there's nothing as a J2EE spec requirement or even a proprietary feature of OC4J/OracleAS which will enable this.
If you have two different EAR files, then they are two different applications, and each will have their own session which can't be shared amongst each other.
If you have data which needs to be shared across different applications then you could either put it on a shared file system or write it to a database which you can then read from in the other application.
One way to do this is to implement the HttpSessionAttributeListener interface which will be called when object are added/removed/updated from a session, and then make a determination on whether the new object needs to be stored in a common place to facilitate sharing between applications.
This is more likely to be a hackaround and ideally you'd examine why you want to share session state across applications and rearchitect so you don't need to do it -- but if you want to try a solution without a major revisiting of the whole application, then perhaps it's an option.
cheers
-steve-
cheers
-steve-

How to pass data between two internal sessions using ABAP memory?

Hi,
How to pass data between two internal sessions using ABAP memory?
It would be fine if you could explain with an example.
And also let me clear about the data passing between two main sessions and two external sessions with specific examples.
Thanks.

Hi ,
check the example.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
In this statement, the system does not check whether the structure of the object in memory is compatible with the structure into which you are reading it. The data is transported bit by bit. If the structures are incompatible, the data in the target field may be incorrect.
PROGRAM SAPMZTS1.
DATA TEXT1(10) VALUE 'Exporting'.
DATA ITAB LIKE SBOOK OCCURS 10 WITH HEADER LINE.
DO 5 TIMES.
ITAB-BOOKID = 100 + SY-INDEX.
APPEND ITAB.
ENDDO.
EXPORT TEXT1
TEXT2 FROM 'Literal'
TO MEMORY ID 'text'.
EXPORT ITAB
TO MEMORY ID 'table'.
SUBMIT SAPMZTS2 AND RETURN.
SUBMIT SAPMZTS3.
The first part of this program is the same as the example in the section Saving Data Objects in Memory. In the example, the programs SAPMZTS1 and SAPMZTS2 are called using SUBMIT. You can create and maintain the programs called using the SUBMIT statement by double-clicking their names in the statement. For further information about the SUBMIT statement, refer to Calling Executable Programs (Reports)
Example for SAPMZTS2:
PROGRAM SAPMZTS2.
DATA: TEXT1(10),
TEXT3 LIKE TEXT1 VALUE 'Initial'.
IMPORT TEXT3 FROM MEMORY ID 'text'.
WRITE: / SY-SUBRC, TEXT3.
IMPORT TEXT2 TO TEXT1 FROM MEMORY ID 'text'.
WRITE: / SY-SUBRC, TEXT1.
Example for SAPMZTS3:
PROGRAM SAPMZTS3.
DATA JTAB LIKE SBOOK OCCURS 10 WITH HEADER LINE.
IMPORT ITAB TO JTAB FROM MEMORY ID 'table'.
LOOP AT JTAB.
WRITE / JTAB-BOOKID.
ENDLOOP.
The output is displayed on two successive screens. It looks like this:
and
The program SAPMZTS2 attempts to read a data object TEXT3 from the data cluster "text", which does not exist. TEXT3 therefore remains unchanged. The existing data object TEXT2 is placed in TEXT1. In both cases, SY-SUBRC is 0, since the cluster "text" contains data.
The program SAPMZTS3 reads the internal table ITAB from the cluster "table" into the internal table JTAB. Both tables have the same structure, namely that of the ABAP Dictionary table SBOOK.
Pls. reward if useful.....

How can we navigate between two windows of same component in webdynpro ABAP

Hi
how can we navigate between two windows( not views ) of same component in webdynpro ABAP. its an urgent requirement
Thanks in advance.
Regards
Laeeq

Hi Laeeq,
You cannot navigate between windows of one component. You can only call a dialog box showing the contents of a second window, or you can embed the contents of a window of a different component.
Just add all the views you need to the one and only main window of the component.
Ciao, Regina

In jsp file, how to transfer parameter between two javabean?

In jsp file, how to transfer parameter between two javabean?
for example
Bean1 has a attribute A
Bean2 has a attribute B
how to transfer the value of A to B

Have you tried something like...
<jsp:setProperty name="Bean2" property="B" value="<jsp:getProperty name="Bean1" property="A" />" />

How to get space between two values in a single cell of a table.

hello,
how to get space between two values in a single cell of a table.
thanks a lot.
kailash.

sorry i got the answer.

How to caluclate tat between two dates of one timestamp field

Hi,
could some one help how to caluclate days between two dates of single timestamp filed and with this
query
Select * from m_activity_transaction where actn_opp_id in (
Select actn_opp_id from m_activity_transaction where ACTN_ACTV_ID = 218
Group by actn_opp_id
having count(*) > 1 ) and ACTN_ACTV_ID = 218
order by actn_performed_on
iam getting output is
ACTN_ID ACTN_OPP_ID ACTN_PERFORMED_ON
319415 95831 27-JAN-12 11.06.20.000000 AM
315249 95831 08-FEB-12 05.32.54.000000 PM
301927 103509 20-DEC-11 04.01.43.000000 PM
301458 103509 19-DEC-11 04.51.03.000000 PM
294841 115840 10-JAN-12 03.20.12.000000 PM
312062 115840 11-JAN-12 05.17.06.000000 PM
and i nedd to caluclate no.of days between two dates like 27-JAN-12 11.06.20.000000 AM and 08-FEB-12 05.32.54.000000 PM where actn_id is unique AND ACTN_OPP_ID IS NOT UNIQUE.
Thanks in Advance,
vvr.

This way?
with data as
select 315249 a, 95831 b, to_timestamp('27-JAN-12 11.06.20.000000 AM', 'DD-MON-RR HH.MI.SS.FF6 AM') dt from dual union all
select 319415, 95831, to_timestamp('08-FEB-12 05.32.54.000000 PM', 'DD-MON-RR HH.MI.SS.FF6 AM') from dual union all
select 301927, 103509 , to_timestamp('20-DEC-11 04.51.03.000000 PM', 'DD-MON-RR HH.MI.SS.FF6 AM') from dual union all
select 301458 , 103509 , to_timestamp('19-DEC-11 04.01.43.000000 PM', 'DD-MON-RR HH.MI.SS.FF6 AM') from dual union all
select 363810 , 144656 , to_timestamp('27-JUN-12 12.43.28.000000 PM', 'DD-MON-RR HH.MI.SS.FF6 AM') from dual union all
select 363500 , 144656 , to_timestamp('26-JUN-12 11.41.50.000000 AM', 'DD-MON-RR HH.MI.SS.FF6 AM') from dual union all
select 363354 , 144656 , to_timestamp('25-JUN-12 12.41.13.000000 PM', 'DD-MON-RR HH.MI.SS.FF6 AM') from dual
select a, b, diff
from (
        select a, b, extract( day from (dt - lag(dt) over (partition by b order by dt, a)) ) diff
          from data
       ) tab
where tab.diff is not null;
A                      B                      DIFF
319415                 95831                  12
301927                 103509                 1
363500                 144656                 0
363810                 144656                 1

How to check relation between two tables in same database

How to check relation between two tables in same database using Oracle SQL developer. Version 2.1.1.64

Hi,
Try this,
SELECT   cons.owner AS child_owner, cons.table_name AS child_table,
         cons.constraint_name constaint_name,
         cons.constraint_type constraint_type, col.owner parent_owner,
         col.table_name parent_table, col.column_name column_name
    FROM dba_cons_columns col, dba_constraints cons
   WHERE cons.r_owner = col.owner
     AND cons.r_constraint_name = col.constraint_name
     AND col.owner = 'MY_USER'
ORDER BY child_table;Thanks,
Shankar

How can I communicate between two simulated software

Hallo,
I have confusion regarding this topic "How can I communicate between two simulated software".
1: PC with CAN simulation
2: PC with AFDX Simulation
Now i have to communicated these two pc with each other.
How can i communicated? which module from ni is best for it.
thanks in advance
BR

I recommend looking at the Simple Messaging Reference Library that NI has released. Use the TCP/IP version of it.
FYI, TCP/IP is a communication protocol that is used to communicate between two computers. It is what the internet uses. So you just need a network switch or router between your computers and you can talk to each other with their IP address.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to configure connectivity between two vm linux hosts

Hello All,
i have installed vm workstation with two RHEL4 linux installation.
Node 1:RHEL4
Node 2:RHEL4
i have configured 2 ethernet cards am able to ping in a host but not each other.
i have tried to ping from Node 1 to Node 2 am getting icmp_seq=0 Destination Host Unreachable .....
kindly suggest how to configure connectivity between two host permanently.please explain with example if possible. or suggest any link.
thanks,
Mike.

1003614 wrote:
thanks for quick reply ....Oracle vm workstation 4.2 am using.
... then your post is now moved to the appropriate forum space for your question (Oracle VM for x86).

How to maintain Session between two ear files?

HI Guys
I have deployed two ear files in oc4j. One is used to open applet and other for business operations.
My problem is after calling applet my session gets invalidate. How to save session between two context
I am new in this field please help!!
the sooner the better
Rahul

Can I do this if I integrate oc4j with apache!!
Can I maintain session
Plz. Help
Rahul

How to bypass object between two collections in tree binding editor

Similar Messages

Maybe you are looking for