How to cal selection screen in module pool
Hi abapers,
I have to use selection screen in module pool programme..How to call selection screen in module pool.
Regards,
ramya
YOU HAVE TO DEFINE YOUR SELECTION SCREEN LIKE THIS
SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
NO INTERVALS.
SELECT-OPTIONS SEL1 FOR SY-SUBRC.
PARAMETERS PAR1 LIKE SPFLI-CARRID.
SELECTION-SCREEN COMMENT /10(20) TEXT-COM.
SELECTION-SCREEN END OF BLOCK BL1.
SELECTION-SCREEN END OF SCREEN 123.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN BEGIN OF SCREEN 99.
SELECTION-SCREEN PUSHBUTTON 15(25) PUBU
USER-COMMAND US01.
SELECT-OPTIONS SEL2 FOR SPFLI_WA-CONNID.
PARAMETERS PAR2 TYPE I.
SELECTION-SCREEN END OF SCREEN 99.
THEN YOU HAVE TO CALL THAT
CALL SELECTION-SCREEN scr.
AFTER THAT YOU CAN CALL THE ANOTHER SCREEN..
CALL SCREEN..
REGARDS
SHIBA DUTTA
Similar Messages
-
Selection- screen in module pool
hi all,
how to create selection screen in module pool programing,
in screen attributes of module pool, 4 screens are present, but selection screen radio button has been disabled.
how to work by using selection screen radio button.
Regards
SuprithHI Suprith,
You ll find a LAYOUT button on the application tool bar just click that button sceen painter sceen will be opend there you have to design your selection screen. Letf side of the sceen painter you see the options use the options as per your requiment and activate . If you are using module pool program go to SE93 create the t-code and give the program name and the screen name which you have created in se51.
hope this will help you...
reward if useful
regards,
sunil kairam. -
How to creat select-option on module pool screen???
Hi All,
please tell me how to creat select-option on module pool screen???
Regards
DeepakHi Deepak Kumar Sharma,
There are Two ways to achieve it...
1) How to create a select-options in a module pool screen.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program> <screen>
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = ' '
text = g_titl1 " 'Customers'
tab_and_field = struc_tab_and_field
TABLES
RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to
dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Also have a look on below threads
how to make select option in module pool
select option in module pool program
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7 -
How to create select-options in module pool program
Hi
i am structed at this point could you please tell me
how to create select-options in module pool programSteps to get SELECT-OPTIONS in module pool programs.
<li>. Start one dialog program with SAPZ_TEST.
<li>. Place the below code in the TOP include of the dialog program.
PROGRAM SAPMZ_TEST.
TABLES mara.
SELECTION-SCREEN BEGIN OF SCREEN 2100 AS SUBSCREEN.
SELECT-OPTIONS: matnr FOR mara-matnr.
SELECTION-SCREEN END OF SCREEN 2100.
<li>. Create one screen 2000 .
<li>. Go to Layout of the screen and Define subscreen area on the screen and Name it as g_subscreen.
<li>. Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN g_subscreen INCLUDING 'SAPMZ_TEST' '2100'.
PROCESS AFTER INPUT.
CALL SUBSCREEN g_subscreen.
<li>. Activate all.
<li>. Create Transaction code for the dialog program SAPZ_TEST.
<li>. Execute the transaction code. You will see the select-option like we see on Selection-screen.
I hope that it gets u clear idea.
Thanks
Venkat.O -
Call report selection screen in module pool program with tab strip control
Hi,
Could anyone explain in detail to call report selection screen in module pool program with tab strip control.
Thanks
ManoHi,
Refer std program:
demo_sel_screen_in_tabstrip.
demo_sel_screen_with_tabstrip.
Call your program with SUBMIT stmt form module program.
Reward points if this Helps.
Manish -
How to provide select-option in module pool programming
Hi all,
How to provide select-option in module pool programming.
If any body knows let me immediately.
Thanks
sudheerHi Sudheer,
Unfortunately there is no standard way of having a select-option in a module pool program.
What you can try is having two fields and creating a range in your program and populating the range at runtime with respective value and trying to simulate some functionality of the select-option.
Hope it helps.
Thanks, Debasish -
How to make select option in module pool
Hello,
Can anybody tell me how to create a select option in module pool screen..?
thanksEasiest way is to create a subscreen and embed this in your dynpro.
report zrich_0006 .
tables: mara.
* Custom Selection Screen 1010
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
p_rad2 radiobutton group grp1,
p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
s_matkl for mara-matkl,
s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*& Module STATUS_0100 OUTPUT
module status_0100 output.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
endmodule.
*& Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
* Screen screen 100 with a subscreen area called "subscreen_1010"
* Screen Flow Logic follows
*process before output.
* module status_0100.
* call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
* call subscreen subscreen_1010 .
* module user_command_0100.
Regards,
Rich Heilman -
At Selection Screen in Module Pool
Hi,
I am doing an Module pool which has 2 screens.
First screen has a table control.
When user double clicks any record in the table control I have to process further with value of the clicked record.
Can anyone let me know how the At Line Selection works in Module pool.
Thanks & Regards,
Sandeephi
u have to make field of table control <b>respond to double click</b> in attributes of that field.
make one button 'PICK' and assign recommended key 'F2' in GUI Status (Its Compulsary to give 'F2')
now in User_command of PAI
case sy-ucomm.
when 'PICK'.
endcase.
Message was edited by:
Dhwani shah -
How to create select-options on module pool screen
Hi all
I want get a range of values from the user from the module pool screen.
Is there any element available on module pool screen like select options on the selection screen of reports.
reply me ASAS.
Thanks.hi krishna
actually I want to display the details of PO numbers from 45000100 to 45000150. user will enter this range on the module pool screen just as we enter on the selection screen of report. My question is do we have a button like select-option on the module pool screen.
Plz . reply me ASAP.
Thanks. -
Regarding selection-screen in module pool
hi
experts,
i am having doubt in module pool programing...
i want create selection screen(pop screen with field) in modulepool., before the display screeen deatils
ex : if i want display the record details for that particular
record number.......
while i am click on display..
pop-up-selection screen will come with record number field..
i f enter the record no, display s the details...
AnanandPlease see Rich's answer here:
[Dialog programming - How to place a select-option field in a dialog screen;
Rob -
Selection screen in module pool programming..
hi,
I designed some screen elements for KUNNR and MATNR and handled their value selection thru POV request.
I want to select data from my table using these values. Will a simple select statement with AND condition on these values work ? I doubt as even if the user does not enter value for one of these, my select is giong to fail. for e.g. he enters value for KUNNR but not for MATNR.
If that is so then shud i need to design a screen which must display select options like for KUNNR, MATNR etc ? if yes then the value that is displayed there when user selects F4 must be controlled by me. how to design this in module pool ?? where to write statements related to selection screen definition and how to handle its selection ?
thksit is possible.
I am involved in this topics check my post for one method .
https://forums.sdn.sap.com/click.jspa?searchID=14529204&messageID=1412188
https://forums.sdn.sap.com/click.jspa?searchID=14529204&messageID=1501162
in the above post there is alternative by Rich. that is simple and easy.
Regards
Vijay Babu Dudla -
Displaying Data Using Selection-screen in Module Pool
Hi All,
Currently I'm working on a module pool program.In that i'm having two screens 9000 and 9001.
I want to select a bookrefno using a selection screen and display header & table control data in 9001 screen when the bookrefno is validated.
can anyone help me sending sample code regarding this
Regards
Ravi SHi Ravi
Place "bookrefno." field on screen 9000.
Use validations on that particular field by using chain-endchain.
in PAI of 9000
case sy-ucomm
when 'display'
call screen 9001
write select statment to display data i.e header & table control in 9001 .
hope this would solve your problem.
reward points, if its helpful.
Thanks
RK Nimma -
Validation Of selection screen in Module pool
Hi Guru,
I am giving Plant as input at selection screen.
Below that I am creating one table control at selection screen.
I have to do validation of the Plant at the selection screen.
I am doing that IN PAI module. But when i give wrong plant at selection screen the table control fields get disable.Then I tried b/w chain end chain the same problem i am facing in that case. Please help me to resolve that.
Maximum point will be rewarded.hi
if you are giving a msg when user input a wrong plant then do not give that message as Error type give it as type 'S' -
How to create dynamic screen using module pool programming
Hi,
Could anybody help me how to create dynamic screens?
I am developing a screen with HR Person with assignment info. If PERNR have multiple assignments, i need to show all the details one by one. How to show the details on screen. I need to call one by one assignment information dynamically.
Please suggest me how to do, apart from using table controls.
Thanks,
KamalYou may have the below options:
1) Table Control
2) Individual fields
3) ALV
4) pop-up screen -
Getting select options in module pool screen
hi experts,
can any one suggest me how to provide select options in module pool screen.
thank you,
regards
vijayHi,
Take two fields on screen first for low value and other for high value (say vbeln_low and vbeln_high) also design a button next to the high textbox for select-option button used to display popup.
Using these two input fields append a range (say r_vbeln for vbap-vbeln) for the field to be used (either in query or anywhere).
ranges : r_vbeln for vbap-vbeln.
IF NOT vbeln_high IS INITIAL.
IF NOT vbeln_low LE vbeln_high.
MESSAGE e899 WITH text-007. "high value is smaller than low value
ENDIF.
ENDIF.
r_vbeln-sign = 'I'.
r_vbeln-low = vbeln_low.
IF vbeln_high IS INITIAL.
r_vbeln-option = 'EQ'. "if user takes only a singlr value
ELSE.
r_vbeln-option = 'BT'. "if user takes both low & high value
r_vbeln-high = vbeln_high.
ENDIF.
APPEND r_vbeln. "append range
CLEAR r_vbeln.
On the button click call this FM to call a popup for select-options.
DATA : tab TYPE rstabfield.
tab-tablename = 'VBAP'.
tab-fieldname = 'VBELN'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
title = text-002
text = ' '
signed = 'X'
* lower_case = ' '
* no_interval_check = ' '
* just_display = ' '
* just_incl = ' '
* excluded_options =
* description =
* help_field =
* search_help =
tab_and_field = tab
TABLES
range = r_vbeln
EXCEPTIONS
no_range_tab = 1
cancelled = 2
internal_error = 3
invalid_fieldname = 4
OTHERS = 5.
IF sy-subrc EQ 2.
MESSAGE s899 WITH text-003. "no value selected
ELSEIF sy-subrc <> 0 AND sy-subrc <> 2.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
This whole code will append your range r_vbeln to be used in program.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir
Maybe you are looking for
-
I have three iPhones using the same iTunes account, can we set something so that all our txt messages are not appearing on all phones?
-
My iPhone 4 keeps restarting by itself. How can I fix this, what is casusing it?
I've seen several other adds about people saying their iPhone automatically resetting as well, but no salutions or advice of why it could be doing this. My battery seems to drain pretty quickly now too. 100% to 20 In maybe 20mins. My phone gets reall
-
Hi All I need to check if duplicate BP are getting created from WEB ui.Please guide me where configuration should be done. I need to populate if Duplicate BP is getting created.
-
HI, I want to develop an application that downloads a file from the web page of the same organization that is updated daily. The page has links and icons that usually users click to open an excel, csv files or pdf documents. I want to download the fi
-
Can i save a song that was attached to an email?
if someone sends me a song in an email, can i save it?