How to calculate Min & Max temperature with just air temperature

Hi Gurus,
I have a requirement in which I have to build a Bex Query in which I have to find the Min & Max temperature of a day if a specific date range is used in the query.I have checked the multiprovider and there is only one field available
which is "Air temperature" and it's a KF. I have built a query which will give you the temperature for the day if you give a particular date range.
My question is,is it possible for me to find the min and max temperature with just air temperature as input?
Please let me know your thoughts.
Thanks,
Raj

Hi,
You have to create two KFs for Min and Max temperatures,
In  Min Temp KF definition, Aggregation Tab-->Minimum--> reference char as 0calday
In Max Temp KF definition, Aggregation tab-->Maximum-->Reference char as 0calday
Regards,
Suman

Similar Messages

  • How to calculate min/max scan rate of PCI-MIO-16XE-50

    My board: PCI-MIO-16XE-50 , 20MHz timebase
    The min/max scan rate is0.00596-20K scan/s and the channel rate is 1.53-20Kchannels/s
    How do they calculate these data?

    Hi May
    Check out the knowledge base locate at http://digital.ni.com/public.nsf/websearch/EA4E306828AF05B586256B8F00661A8B?OpenDocument . I think it answers your question.
    Serges Lemo
    Applications Engineer
    National Instruments

  • How do I create a track with just controller MIDI data in it?

    How can I create a track with just MIDI controller data in it? 
    For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
    I can then use this setup as a template for future projects.
    How can I do this?
    It seems like LPX will not allow me to enter any controller data into a track without first defining a region. However, it seems that LPX also won't allow me to create a region with just controller data in it. 
    Ideas?
    Thanks
    -Mike

    Soniq2 wrote:
    How can I create a track with just MIDI controller data in it? 
    For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
    I can then use this setup as a template for future projects.
    How can I do this?
    Let me qualify, I'm using Logic 9, not upgrading for various reasons.
    Is this for an external Instrument? If so it's very easy to do using the inspector, but first you have to create an instrument in the environment. (at least in L9 and the way I do it, which is old school)  Here's an example of an external instrument setup in the Environment.
    A multi Instrument is created, channels 1, 2, 3, & 9 are active. Patch names are entered, format for bank change is selected. (just happens I selected channel 14 to open the patch names).  This Instrument will now appear in the arrange page, and you can set patch change, bank change, volume & pan.

  • How to calculate any two date with diffence calculation by using obiee11g?

    Hi,
    i have a requirement like,
    location wise current month and previous month with movement calculation,can to tell me how to calculate any two date with diffence calculation
    by using obiee11g
    Note,
    I tried to implemented ago function as well as dynamic two dates calculation using $2-$1 methods..but i am getting the o/p it's self i am getiing some null value also that' why it's not tallying with our actual report.
    i tired to used ifnull(mesaurecolumn,0) also case condition on the mesaure colution still it's not tallying.
    THanks and Rds,
    Devarasu.R

    Hi,
    for Date Difference........
    TimestampDiff(interval, timestamp1, timestamp2)
    ex:TimestampDiff(SQL_TSI_DAY, cast('1-apr-2011' as date), current_date)
    Where:
    interval
    The specified interval. Valid values are: SQL_TSI_SECOND, SQL_TSI_MINUTE, SQL_TSI_HOUR, SQL_TSI_DAY,
    SQL_TSI_WEEK, SQL_TSI_MONTH, SQL_TSI_QUARTER, SQL_TSI_YEAR.
    Cheers,
    Aravind

  • I just want to see my files with explorer.  Then transfer all pics to my computer. With the new update I can't.   How do I access my file with just explorer?

    I just want to see my files with explorer.  Then transfer all pics to my computer. With the new update I can't.   How do I access my file with just explorer?

        Let's bring back your file control, jpandwibble. What happens when you connect to your computer? Are you trying to use Explorer on the device or on computer? I am eager to continue troubleshooting!
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • [svn:fx-trunk] 13276: Min/ Max size fixes for AIR Window and WindowedApplication.

    Revision: 13276
    Revision: 13276
    Author:   [email protected]
    Date:     2010-01-05 07:18:31 -0800 (Tue, 05 Jan 2010)
    Log Message:
    Min/Max size fixes for AIR Window and WindowedApplication.
    AIR won?\226?\128?\153t allow you to set the min width greater than the current max width (same is true for height). You also can?\226?\128?\153t set the max width less than the current min width (same is true for height). The code that sets nativeWindow.minSize and nativeWindow.maxSize has been modified to take this into account.
    QE notes: None.
    Doc notes: None.
    Bugs: SDK-24566
    Reviewer: Corey
    Tests run: checkintests, apollo/spark/components/Window.as, apollo/spark/components/WindowedApplication.as, apollo/Window, apollo/WindowedApplication
    Is noteworthy for integration: no
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24566
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/Window.as
        flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/WindowedApplication.as
        flex/sdk/trunk/frameworks/projects/airspark/src/spark/components/Window.as
        flex/sdk/trunk/frameworks/projects/airspark/src/spark/components/WindowedApplication.as

    THank you , Nancy. Appreciate the input.
    So instead of this:
    <a class="brand" href="index.html"><img src="../img/logo-ca.png"alt="Consumers Advocate Review"> </a>
    Would it be something like this?:
    <a class="brand" href="index.html"><img src="http://ConsumersAdvocate/img/logo-ca.png"alt="Consumers Advocate Review"> </a>
    And if I do that, is there a way to cope with that locally so that DW can still display the images?
    jeff

  • How to get min/max price to be captured from last 6months

    Hi friends,
    I'm confusing about my report requirements can anybody suggest about the below comments.
    1) I want to generate report min/max price to be captured for last 6months based on query selection given values e.g: material, calmonth.
    2. Query date/Query month is based on Purchase order creation date.
    3. When we execute query for given 0material, 0calmonth e.g: 10000 , 12.2008 report output should be last six months min/max price for materials.
    How can i get this type of report.
    Anybody suggest me on this.
    Thanks lot
    Siri

    Dear Siri,
    I understand that your report should be like:
    Material     CalMonth    Min Price    Max Price
    Have you explored the option of using the Price field with the properties set to Min for one column and Max for another?
    Regards,
    Nitin S.

  • Pivot view  - how to find min & max on a  level lower than selected..

    Hi all,
    we have a pivot view having structure.
    Year
    Dept |Count| Min | MAX |
    ABC | 87 | | |
    XYZ | 44 | | |
    Can we find out the min & max in the current year selected on quarter level & not on year and no show quarter on report. I.e the min count & max value of count in the 4 quarters.
    also for below structure.
         Year
    | Q1 | Q2 | Q3 | Q4 |
    Dept |Count| Min | MAX |Count| Min | MAX |Count| Min |MAX | Count| Min | MAX|
    ABC | | | | | | | | | | | | |
    XYZ | | | | | | | | | | | | |
    similarly find on quarter & for quarter we want the min & max on month level. i.e minimum & max in 3 months under that quarter.
    If we set the aggregation level as Min in max in pivot itself it shows the min & max same as the count as it calculates on the year level.
    Thanks,
    Dev

    Using hierarchies with exception aggregation can give strange results when aggregating to the parent nodes of the hierarchy. Recommendations:
    1) check whether the results are still wrong if you deactivate the hierarchy view
    2) build you exception aggregations globally. That is, do not define the exception aggregation in the structure of your query. Build it as a CKF on your InfoProvider.
    3) if the above steps don't work, perhaps you can use APD or get the exception aggregations calculated in the load to the InfoProvider rather than in BEx

  • FF9 - can i hide window control buttons in titlebar (min, max, close) with userchrome.css?

    I use FF9. In userscript.css i hide titlebar and orange app button, but window control buttons still visible! I just can`t find working script.
    I dont need min-max-close button and wont to hide it without extension if possible.
    Here is screenshort:
    http://s018.radikal.ru/i522/1201/50/f6a6ea445507.jpg

    Try this code in userChrome.css below the default @namespace line.
    *http://kb.mozillazine.org/userChrome.css
    The customization files userChrome.css (interface) and userContent.css (websites) are located in the chrome folder in the user profile folder.
    *http://kb.mozillazine.org/Editing_configuration
    <pre><nowiki>*http://www.mozilla.org/en-US/firefox/channel/
    #titlebar-buttonbox { display:none!important; }
    </nowiki></pre>

  • How to set min & max connections for  MSSQLconnection pool

    Hi,
    I want to set minconnection, maxconnection, idletimeout initial limit for the pool
    I have got a MSSQL database connection using following java code.
    // MSSQL DbConnection Code
    import java.sql.*;
    public class MsSqlDataSource
    public static void main(String arr[])
    Connection con = null;
    ResultSet rs = null;
    try{
    com.microsoft.sqlserver.jdbc.SQLServerDataSource ds = new com.microsoft.sqlserver.jdbc.SQLServerDataSource();
    ds.setServerName("10.50.50.51");
    ds.setPortNumber(1711);
    ds.setDatabaseName("test");
    ds.setUser("starhome");
    ds.setPassword("starhome");
    con = ds.getConnection();
    }catch(Exception e){}
    }In oracle i have passed min and max number of connection properties through setConnectionCacheProperties method.
    //Connection Pooling using Oracle Data Source:
    m_connSource = new OracleDataSource();
    m_connSource.setDriverType("thin");
    m_connSource.setServerName(m_host);
    m_connSource.setNetworkProtocol("tcp");
    m_connSource.setDatabaseName(m_db);
    m_connSource.setPortNumber(m_port);
    m_connSource.setUser(m_user);
    m_connSource.setPassword(m_password);
    // Enable caching. m_connSource.setConnectionCachingEnabled(true);
    java.util.Properties prop = new java.util.Properties();
    prop.setProperty("MinLimit", m_minConnections);
    prop.setProperty("MaxLimit", m_maxConnections);
    prop.setProperty("InitialLimit", m_initialConnections);
    prop.setProperty("InactivityTimeout", m_inactivityTimeout);
    prop.setProperty("AbandonedConnectionTimeout", m_abandonedTimeout);
    prop.setProperty("ConnectionWaitTimeout", m_connWaitTimeout);
    m_connSource.setConnectionCacheProperties(prop);I dont know how to pass min and max number of connection properties for SQLServerDataSource. Is there any method available to pass min and max number of connection properties for SQLServerDataSource.
    Iam using Tomcat. I found one way to set min and max connections for pool by doing changes in context.xml and web.xml using below url http://tomcat.apache.org/tomcat-4.1-doc/jndi-datasource-examples-howto.html
    I dont want to touch tomcat configuration files. I need to set connection pooling properties which is independent of application server.
    Please anybody give solution for this?
    Thanks,
    Prisha

    Hi,
    you need to define your database under the DB Admin tab. In the Schema objects node you'll find Sequence Implementations, and there you can definde min max values as well as caching and increments.
    Gerald

  • How to get min,max,avg time for query execution?

    Dear Friends,
    In AWR we are getting avg time taken to execute particular query, how can one get min,max time taken by query during number of executions.
    Thanks

    I would run the sql in a cursor for loop, to get a quite reasonable execution time without changing the actual execution plan:
    SQL> show user;
    USER is "HR"
    SQL> set timing on
    SQL> select count(*) from all_objects;
      COUNT(*)
         55565
    Elapsed: 00:00:03.91
    SQL> var p_sql varchar2(200)
    SQL> exec :p_sql := 'select * from all_objects'
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:00.00
    SQL> declare
      2  t1 timestamp := systimestamp;
      3  begin
      4    execute immediate 'begin for c in (' || :p_sql || ') loop null; end loop; end;';
      5    dbms_output.put_line('Elapsed: ' || (systimestamp - t1));
      6  end;
      7  /
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:03.53
    SQL> declare
      2  t1 timestamp := systimestamp;
      3  begin
      4    execute immediate 'begin for c in (' || :p_sql || ') loop null; end loop; end;';
      5    dbms_output.put_line('Elapsed: ' || (systimestamp - t1));
      6  end;
      7  /
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:02.75
    SQL> declare
      2  t1 timestamp := systimestamp;
      3  begin
      4    execute immediate 'begin for c in (' || :p_sql || ') loop null; end loop; end;';
      5    dbms_output.put_line('Elapsed: ' || (systimestamp - t1));
      6  end;
      7  /
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:02.73
    SQL> declare
      2  t1 timestamp := systimestamp;
      3  begin
      4    execute immediate 'begin for c in (' || :p_sql || ') loop null; end loop; end;';
      5    dbms_output.put_line('Elapsed: ' || (systimestamp - t1));
      6  end;
      7  /
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:02.66
    SQL> ---- alter system flush shared_pool;
    SQL> declare
      2  t1 timestamp := systimestamp;
      3  begin
      4    execute immediate 'begin for c in (' || :p_sql || ') loop null; end loop; end;';
      5    dbms_output.put_line('Elapsed: ' || (systimestamp - t1));
      6  end;
      7  /
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:02.80
    SQL> declare
      2  t1 timestamp := systimestamp;
      3  begin
      4    execute immediate 'begin for c in (' || :p_sql || ') loop null; end loop; end;';
      5    dbms_output.put_line('Elapsed: ' || (systimestamp - t1));
      6  end;
      7  /
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:02.64
    SQL>
    https://forums.oracle.com/thread/705536?start=15&tstart=0
    Regards
    Girish Sharma

  • HT1600 how may i connect apple tv with macbook air?

    could you help me to connect apple tv with mcbook air ?

    Welcome to the Apple Communityegc1.
    The following article(s) may help you.
    Understanding Home Sharing
    Setting Up Home Sharing On A Computer

  • How to use min-max functions for date in transformation in bpel?

    Hi,
    I have a requirement where i need to map earliest date of a Source field among all the dates to a target field in a transformation file in BPEL. There are functions called max-value-among-nodeset and min-value-among-nodeset in mathematical functions but they can be used only for numbers and strings.How to do these with dates?
    Thanks,
    Prasanna

    I exactly have the same requirement.Are you able to solve this?
    Its very urgent.Please help me.

  • How to overload two different procedure with just one name in to package

    i have created two procedure avg1 and avg2.avg1 calculate average of total salary based on e_id and avg2 calculate average based on j_id.now i want to create a package with specification and body where i want to use just one name -avg- for two different procedure.

    You can overload the same name for procedure as long as their formal parameters differ in number, order, or datatype family.
    Read more about overloading in documentation

  • How to create MIN/MAX limitations in SELECT statement ??

    Hey,
    I have a table which rank90 (city population ranked from 1>*) and state_abrv which has the corresponding state for each city rank.
    Is there a way to select only the maximum AND minimum ranks for each state ??
    I realise there is a max and min function, but i need to do it for EACH state_abrv.
    An example say Los Angeles is ranked 2, San Diego is ranked 6, and San Fransico is ranked 14 (All of these citys are in california (CA)). How do i display a table which lists only Los Angeles (Highest rank) and San Fransico (lowest rank) but DOESNT list San diego ??
    Thanks, you guys are helping me heaps and im starting to learn a lot more :P
    Message was edited by:
    user495524

    SQL> create table t (state varchar2(2), city varchar2(20), n number);
    Table created.
    SQL> insert into t values ('CA','San Francisco',14);
    1 row created.
    SQL> insert into t values ('CA','San Diego',6);
    1 row created.
    SQL> insert into t values ('CA','Los Angeles',2);
    1 row created.
    SQL> insert into t values ('NY','Buffalo',4);
    1 row created.
    SQL> insert into t values ('NY','Syracuse',7);
    1 row created.
    SQL> insert into t values ('NY','Mt Kisco',2);
    1 row created.
    SQL> insert into t values ('NY','Albany',5);
    1 row created.
    SQL> select * from t order by state, n desc;
    ST CITY                          N
    CA San Francisco                14
    CA San Diego                     6
    CA Los Angeles                   2
    NY Syracuse                      7
    NY Albany                        5
    NY Buffalo                       4
    NY Mt Kisco                      2
    7 rows selected.
    SQL> select state, city, n from
      2    (
      3    select t.*, min(n) over (partition by state) min_n,
      4      max(n) over (partition by state) max_n from t
      5    )
      6  where n in (min_n, max_n) order by state, n desc;
    ST CITY                          N
    CA San Francisco                14
    CA Los Angeles                   2
    NY Syracuse                      7
    NY Mt Kisco                      2
    SQL>

Maybe you are looking for

  • Error in "Run Java migration toolkit", doing a SAP system copy.

    Hi all, Migration to new hardware with system copy, get an error in CI installation on "Run Java Migration Toolkit". From the sapinst.log: ERROR 2009-05-13 12:46:47.188 FJS-00003  TypeError: ci.getInstanceDir() has no properties (in script NW_Doubles

  • Problem in VA02 call transaction

    Hi Friends I processed failured IDOC through ZPROGRAM, after processing IDOC it will create a sale order and display the order number in my program output.Whenever user clicks that button it should take him into VA03 transaction.It was working fine,

  • Can I upgrade FCP from 7 yrs.ago with my new comp purchase?

    I bought the full out FCP in 2001. I am about to buy new mac but cannot drop $1000. Do upgrades work that far apart? I have the same situation for Photoshop too. I don't really want to buy the cheaper abbreviated versions. Thanks!

  • Query on select query

    hi, in my selection screen i have 5 fields ie matnr mtart matkl erdsa from table mara and werks from table marc o/p if i input any one of the 5 fields in the selection screen i need the output for all the 5 fields which matches the selection conditio

  • POST / Recieving Problems

    Hello, I'm having a problem with my applet. I am sending POST variables to a PHP page and then recieving new info back from it. However, it doesn't seem to want to send the info back... It does seem like it is sending it though, because the applet ki