How to calculate stock on hand initial based on VALUATED not Category group

Dear Expert,
Now, i want run SNP with initial stock on hand calculated by stock on hand based on VALUATED not category group like CC or CI. Because in ECC we used a lot of valuation types for materials.
please show us.
thanks so much
hungth

Hi,
1) You need to answer the question whether you really need this 200 quantity in APO or not? Is your requirement only relevant to SNP? Or that even for GATP, PPDS, etc you don't want to get this 200 stock in APO. If you don't want this 200 quantity in APO at all, then what I said  earlier would be applicable. You could try to have enhancement in CIF so that valuation type AKDTCLT1(200 quantity) gets exluded in CIF and doesn't reach APO. I am not really sure how simple or complex this could be, but most likely should be possible.
2) Once the stock is in APO, are you able to distinguish between the 2 stocks in anyway? As far as I know, it won't be possible to distinguish. You could see the version (batch from R/3), and the stock category. I am not sure if valuation type info would be available in any way in APO, but may be I am wrong. Even if you were somehow linking the stock valuation type to the storage location stock, I think only possibility for your would have been to block storage location specific stock to come to APO in CIF (for ALL storage locations), but the stock at Plant level would still come to APO.
If somehow you are able to distinguish the stock based on valuation type, then Ada's solution could be used.
Thanks - Pawan

Similar Messages

  • How to calculate average for a keyfigure based on 0calmonth.

    Hi Experts,
    I have a requirement in SAP BI  is as below.
    I have 2 colums in my query  1. 0calmonth ( charactersic) 2. PERDAY TARGET(KF)
    Now I want to create a new column t.e.  "AVERAGE  YTD TARGET" for" PERDAY TARGET" based on "0CALMONTH"
    Like, I have 10 records in one month (APRIL) and another month (MAY) having 25 records.
    SO I want to display "AVERAGE YTD TARGET " for each record in Report .
    so,please let me know the procedure to complete this in BEX query.
    Thanks in advance.
    Regards,
    Surendra babu

    Hi,
    Please go through this pdf if you want to know how exception aggrgation works.It will be really helpful for you.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0b8ed5b-1025-2d10-b193-839cfdf7362a?quicklink=index&overridelayout=true
    Regards,
    AL

  • Stock on Hand at External finisher is not getting reduced after shipment !

    hello all,
    would like to take help from the oracle retail experts and friends to know
    1. why does the SOH is not getting reduced at external finisher level when we are moving stocks from External finisher to Warehouse .
    2. Due to this i hope there is an impact on avgerage cost when we execute the process from the same EF (where some SOH are available ) to Wh .
    your thoughts and opinions on the same is high invaluable .
    regards,
    Deepak

    hi
    when your are making production it must come to project stock
    in  the item category (tan) or other  you want to mention as q  as special stock
    that time only the stock will reduce after you are doing the pgi
    Regards
    Raj

  • How to calculate a week & Month in given date range (not for sele-options)

    Hi ,
      I have defined 2 date parameters in sel-screen (Plz remember that date variable are not a SELECT-OPTIONS).  Now i want ot display week nos & monts in output.
          Ex: date1: 20080101 & date2: 20080229. then
                    weeks : 1, 2, 3,---9.
                    months: jan-08, feb-08.
    Plz help me with block of code or any FM.
    Regards,

    Hi Srikanth,
            The FM HR_99S_INTERVAL_BETWEEN_DATES   is doesn't existing, but there is a fm HR_MX_INTERVAL_BETWEEN_DATES but it returns no of Years & Days.
           But i found some FM which r returns no of months for given date range. but my requirement is, want to display the month no bw 1 to 12. (ex: dat1=15-03-2008 & dat2= 01-06-2008 then in month fields 03,04,05 & 06. ).
    Plz help me on this.
    -Regards.

  • Diifferent Accounts based on Valuation Class /Material group  Shorttext -PO

    Hello Sapient
    We need to differentiate the Posting for short text PO . we want  the Asset  / Office supplies / Services to post in to a separate G/L Account .We seperate it by Material group , but the posting cannot be done by valuation class assigned to the material group . How can  we handle  the WRX using valuation class or by any method. what i am referring is all for PO without material master. .
    Thanks
    Jeevan

    Hi Jeevan,
    You are absolutely right. I am also facing the same problem. In our case also we do not have a material master. We have created a PO with short text and with a material group. We have assigned a valuation class to this material group.
    We have used account assignmed category "P" for the PO.
    For the debit posting i.e. for GBB-VBR its taking the GL account based on the valuation class, but for WRX its not taking the GL account with the valuation class.
    We want to have different GR/IR account (say 108) for domestic PO's and different GR/IR account (say 109) for Import PO's. We are not able to do this diffrentiation because in OBYC in WRX, while doing MIGO the system is picking only that GL account for which the Valuation class is blank.
    I don't think there is a solution to this. If you find any then pl
    pease let me know.
    But if you don't want to segregate the GL Accounts in WRX then the simple thing for you to do is in OBYC WRX maintain the GL account without Valuation class. Your problem will be resolved.
    Rgds
    Prasad.

  • Ageing Report(STOCK IN HAND)

    Dear All,
    Can I have ageing report for stock in hands (Lot based ) in PP/MM
    modules.
    Kindly give your advises .
    Thanks In Advance
    Rakesh Sehgal

    Hi Rakesh,
    pls check below two tcodes
    1. MC46 - Slow Moving Items
    2. MC50 - Dead stock items
    Regards,
    Sankaran

  • How to ajust stock balance  marco in snp?

    Dear SAP,
    Now, we have created loc-pro hierachy to aggregate demand of location K410  = T661 + T671.
    However, the system has only aggregated wrong stock on hand K410 = T661 + T671 not including stock on hand of itself.
    Please, tell me how to ajust stock on hand marco?
    thanks so much.

    Hi,
    You need to create a stock category group with all stock categories that you would like to consider as available stocks.
    Or you can pick  a standard group like STK if it contains all categories relevant to your business model.
    This stock category group needs to be assigned in the location master SNP tab.
    If this does not help, please check the stock balance macro & check if it is active, or it has been tampered with.
    Regards,
    Ashok

  • How to Calculate the Actuall work days ....

    Hi Friends,
    how to calculate the Actuall Working days Based on the Joining date for 5day work and 6 days work?
    is there any FM to calculate this?
    Thanks in Advance,
    sudha.

    Hi Sudha,
    In your company , If they are maintaining Time Events then you can get the information of Employee's Presense or Absense from infotype 2011 (Time Events) and Absense from 2001 (Absense)..
    Also Consider Factory Calender for it.. and check out working days..
    Table TEVEN
    Try below FM as well..
    HR_DV_TIMEEVENTS_GET
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7
    ilesh Nandaniya

  • How to make stock zero after asset consumption?

    Dear all,My scernio is that our business process is cwip all the material is posted either in asset or cost center no inventory is maintained.But for one material user forgot to give account category but in backhand my fico consultant consumped that material agianst asset.But when  checking the STOCK it showing.Pls help how to make stock zero without account effect.It is not possible to reverse as the payment already done.FOR STOCK USING STANDARD TCODE.
    PLS HELP???????????????????????????????

    >
    Tanmoy_mm wrote:
    > Dear all,My scernio is that our business process is cwip all the material is posted either in asset or cost center no inventory is maintained.But for one material user forgot to give account category but in backhand my fico consultant consumped that material agianst asset.But when  checking the STOCK it showing.Pls help how to make stock zero without account effect.It is not possible to reverse as the payment already done.FOR STOCK USING STANDARD TCODE.
    >
    > PLS HELP???????????????????????????????
    how could  your fico consultant consume  that material against asset, without the stock is going down?
    did he do a FI posting only?
    if so, then he has to reverse it and has to post the consumption with a MM movement.

  • CFM /TR - how system calculate amount based on rate FX 60A

    Hi all,
    i need to know how system calculates amount based on rate entered upon creating a contract (t-code TX01).
    steps input:-
    1. header - comp code, product type, trans type
    2. partner
    3. purchase curr & amount (eg. IDR 8,345,545,500)
    4. sale currency only (amount system will auto calculate) USD
    5. rate field = 11.553
    6. spot rate will auto pick up from rate
    7. value date
    8. contract date
    upon TBB1 no error. posting log as follows:-
    FX1000+ : 40 8,345,545,500 IDR bank GL acc
                    50 8,345,545,500 IDR clearing acc
    FX2000- : 40 722370.42 USD clearing acc
                   50 722370.42 USD bank GL acc
    but upon TPM18 error occurred as follows:
    DBT_C009 - GL not maintain in acc symbol 5.3.4
    DBT_E039 - no posting spec assigned to update type
    DBT_B018 : 40 0 USD, 431,977,511 IDR gain/loss
                       50 0 USD, 431,977,511 IDR clearing acc
    so, after maintained DBT_C009 as follows still error for DBT_E039:
    40  0 USD, 38 IDR clearing acc
    50  0 USD, 38 IDR P&L gl acc
    what i don't understand is how system calculate and get DBT_C009 & DBTE039.
    what is the function of TPM18?
    thanks.

    Hello Prarnod,
    I have done the first node only for actuals that come from the integration to the internal order.
    I have tried setting up 2 and 3 even though the 3rd one does not make any sense to me
    Thanks,
    Paul

  • How to calculate % based on totals of a characteristic

    HI BI query goeroes,
    I have following query:
    Sales org - S&OP - Channel - PSI - KeyFigure1 - % S&OPKF1 - % Channel KF1
    S100--SAA---1010/60--
    10/30
    S100--SAB---2020/60--
    20/30
    total  ChannelA--
    30
    S100--SBA---1515/60--
    15/30
    S100--SBB---1515/60--
    15/30
    total  ChannelA--
    30
       total S&OP S                                 60
    Question is how to calculate the last two colums.
    First colum should calculate the Keyfigure1 percentage based on the overall total of S&OP per salesorg (keep in mind that we have multiple sales orgs).
    Last colum should calculate the Keyfigure1 percentage based on the total of Channel per salesorg/s&op group.
    Can anyone please assist me how to do this?
    I am using the BI7.0 query designer.

    Hi,
    To Calculate % Channel KF1 you can use  'Percentage of Result'(KeyFigure1).
    To calculate % S&OPKF1 you can use ' Pecentage of Overall Result' (Keyfigure1).
    These are functions are available in the Percentage Functions when you create a formula or a CKF.
    Hope this helps.

  • How can config for SNP Aggregate only aggregate demand not stock on hand?

    Dear SCM Expert,
    Now we want the system aggregate only demand and not aggregate stock on hand ( Stardard system aggregate both of them) so what i have to do?
    thanks so much.

    Hi
    The stock on hand is a calculated key figure. It is calculated based on macros. So you have to write a macro or you can copy the stock balance macro logic from the standard detailed book. In the detailed book no aggregation is done. But to avoid aggregating stock on hand you have to put logic in the macro
    Thanks
    Aparna

  • If physicaly checked the stock found zero. how to enter stock zero in systm

    if physicaly checked the stock found zero. how to enter stock zero in system
    thanx

    Hi
    You can follow the following physical Inventory transaction for updating ZERO stock in the system.
    Please go with following transaction
    MI01>Create physical inventory document>Enter Document Date>Planned count date>Plant Code>Storage Location>Click on Enter button>you will get the separate screen>Enter material code>and click on SAVE button (Ctrl+S)>you will get Physical inventory document number. (MI02-Use for delete)
    (After getting Physical inventory document number you go with MIO4)
    MI04>click on enter button>you will get "Enter inventory count screen>Enter Phys. inventory doc.no>Fiscal year>Count date>click on enter button>you will get separate screen>Enter physical qty>and click on save button ((Ctrl+S)>you will get massage from the SAPu201D Count entered for phys. inv. doc. 100000112"
    (After completed above transaction you please go with MI07)
    MI07>you will get Post inv.differences: initial screen>Enter Phys. inventory doc.> Fiscal year> Posting date>click on enter button>you will get separate screen with deference qty>click save button (Ctrl+S)> you will get document number generated from the system (Diffs in phys. inv. doc. 100000112 posted with m. doc. 4900001246)
    Physical Inventory:
    Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
    Physical inventory can be carried out both for a companyu2019s own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
    Physical Inventory Processes:
    Several inventory processes available for physical inventory which includes as follow:
    1. Periodic Physical Inventory
    o All stocks of the company are physically counted on the balance sheet key date
    o Every material must be counted
    o Entire warehouse must be blocked for material movements during count.
    2. Continuous Physical Inventory
    o Stocks are counted continuously during the entire fiscal year.
    o It is important to ensure that every material is physically counted at least once during the year.
    3. Cycle Counting
    o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
    o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
    o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
    4. Inventory Sampling
    o Randomly selected stocks of the company are physically counted on the balance sheet key date.
    o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
    Physical Inventory Process Cycle Flow
    1. Creation of physical inventory document
    - Physical inventory document(s) is created individually or using the batch program, click for more information
    - The transaction codes for creation physical inventory are as follow
    Individual Inventory documentation creation
    MI01 - Individual physical inventory creation
    MIS1 - Inventory Sampling document creation
    MICN - Cycle count inventory document creation
    Collective Inventory document creation
    MI31 - Own stock without special stock
    MIK1 - Vendor consignment
    MIQ1 - Project stock
    MIM1 - Returnable Transpiration material
    MIW1 - Customer Consignment stock
    MIV1 - Returnable material with customer
    MIO1 - Material provided to Vendor (Subcontracting material)
    2. Print physical inventory document
    - Physical Inventory document can be printed based on the physical inventory document status and or item status
    - Transaction code MI21 is used to print the inventory document where print default value can be populated
    3. Count the physical stock
    - Based on the inventory document printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
    4. Enter count in system
    - On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
    - If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
    5. Analyze difference
    - Once count is posted in the system, difference analysis can be carried out using transaction MI20
    - The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
    - The output gives information about the book quantity, Counted quantity, difference in quantity and value.
    - From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
    6. Initiate recount and follow the steps 3,4,5
    - If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
    - New inventory document will be created for selected items or for entire document
    - The original document items will be deactivated once recount is initiated so original document will not be available for further process.
    - On initiating recount, you need to process same as for new count document.
    7. Post the difference
    - Several options are available for posting difference
    - Post difference after count is posted using transaction code MI07
    - Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
    - Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
    some more points for posting difference
    - Posting period must be open to post inventory difference.
    - The fiscal year is set by specifying a planned count date when creating a physical inventory document.
    - Tolerence to crear difference per user group can be set in customization.
    - The system will generate material document for the difference qty and post the value to appropriate account (for valuated stock)
    - The movement type in material document will be 701 or 702 based on gain or loss of material.
    Serial Numbers in Physical Inventory
    If material is managed with serial number then it is possible to carry out physical inventory for material with serial number. There are some pre-requisite before you carry out physical inventory for serialized materials.
    - Serial number profile must be maintained in the material master.
    - the serialization procedure MMSL (maintaining goods receipt and goods issue documents) has to be assigned to serial number profile.
    - The stock check indicator in the serial number profile should be configured.
    - Maintain basic settings for the serial numbers in customization for Serial Number Profile.
    - Configure serial number management for physical inventory in the Settings for Physical Inventory step in Customizing for Inventory Management.
    Blocked Stock Returns are the stock which is return stock from Customer or the stock which can be return back to vendor. To restrict the usage of this stock mostly business do transfer posting for this mateial as BLOCKED stock
    Thanks & Rgds,
    Rajesh

  • How to calculate when I need multiple WFE and APP servers in SharePoint 2013 ?

    Hi,
    Please let me know about those factors are involved on the above topic. Share something from the real experience or with examples in details.
    Thanks
    srabon

    Hi,
    NOte: some links although for 2010 but fits for 2013
    for the WFE is the RPS  Requests per second versus the users
    to get the RPS
    http://smallcitydesign.com/how-to-get-sharepoint-2010-requests-per-second-rps/
    and this excel sheet to get the users versus RPS
    http://pcfromdc.blogspot.com/2013/02/determine-max-users-from-requests-per.html
    and here you are how to get the number of front ends
    http://abhayajoshi.blogspot.com/2014/01/how-to-calculate-number-of-web-front_24.html
    for Apps server, it is based on memory and cpu consumption, check those links
    http://blogs.msdn.com/b/sanjaynarang/archive/2013/04/06/sizing-and-capacity-planning-for-sharepoint-2013-resources.aspx
    https://technet.microsoft.com/en-us/library/ff758645.aspx
    https://technet.microsoft.com/en-us/library/cc262971.aspx
    the most important thing after you do you initial capacity planning is capacity mangement, check my wiki article in here
    http://social.technet.microsoft.com/wiki/contents/articles/28226.sharepoint-2013-capacity-management.aspx
    you can also make load testing using the following:
     Visual studio or 
    https://gallery.technet.microsoft.com/office/PressurePoint-Dragon-for-58648ae4
    Kind Regards,
    John Naguib
    Senior Consultant
    John Naguib Blog
    John Naguib Twitter
    Please remember to mark this as answered if it helped you

  • How to migrate from forms to web based application

    Hi,
    I did a form for Oracle applications, but client need a web based form for this application how can i migrate this to web based form. If it is possible can u give me suggestion how migrate.
    Kishore B

    Not sure if that's possible, as developing forms for Oracle Applications requires the use of TEMPLATE.fmb to start with, and the use of certain standards to adhere to the look and feel of the applications. Review the Oracle Applications Developer's guide for more details.
    What You may do now is to upload the form to the Application Server and compile it to the adequate directory $PRODUCT_TOP/forms/[LANG], register the form, associate to a function and use it in a menu to see it trough Oracle Applications standard interface, but it may show a very different L&F and not all standard functionality may be available. With the Dev Guide's on hand, apply required changes and test Your form in the application.

Maybe you are looking for

  • Is there any way to hide data from the BW developers in BW environment?

    my company needs a special case where the BW developers need not see the HR data like income, age etc of the other employees but when a report is printed, the data should be displayed. Is there a possibilty like this?

  • Video not fitting into preview window

    Hello, I have been running into a problem that I have not had untill I restored my computer a few months back. To start off I know my video files are in 720p and I have the sequence setting set accordingly. When I place the video files into the "Sour

  • Connecting Z10 to Link issues

    I bought a new Z10 a few months ago and after several updates to z10 and bb link i still can't connect my phone to link to sync any contacts or back it up. I use to just back up my old bb 7.1 over wifi or the network but that option is no longer avai

  • Include in smartform.

    Hi.. how do you write include in a smartform? for exmplae this is the include statment i have: INCLUDE &VBDKA-ZTERM& OBJECT TEXT ID SDTP PARAGRAPH L. Regards, Srihari.

  • E4200 as a Access Point/Bridge Mode

    I have spent most of the weekend trying to get this router to act as a proper Access Point. Has any got this to work correctly? When it does work (Stay connected) speeds and latency are rotten. If I go back to Routing Mode this thing kicks butt, but