How to call a ABAP proxy class from a BADI? Please help!

hi Experts,
I have a scenario where I have to call a ABAP proxy class from a BADI. How can I do this? Does anybody has sample code for the same?
Please help.
Thanks
Gopal

Hi Gopal,
Check this out
DATA: ref_obj    TYPE REF TO zmfg_production_ord.----> BADI
* Instantiate the proxy class
    CREATE OBJECT ref_obj.
    TRY.
        CALL METHOD ref_obj->execute_asynchronous
          EXPORTING
            output = it_output.     "Output Structure
        COMMIT WORK.
      CATCH cx_ai_system_fault INTO ref_sysexception.
    ENDTRY.
    IF ref_sysexception IS INITIAL.
      WRITE : / 'Error Message'.
    ENDIF.
Edited by: Raj on May 28, 2008 4:52 PM

Similar Messages

How can I call a ABAP proxy class from BADI? PLease help

hi Experts,
    I have a scenario where I have to call a ABAP proxy class from a BADI. How can I do this? Does anybody has sample code for the same?
Please help.
Thanks
Gopal

Hi,
   You can call a method of a class from BADI. Here are the steps.
   1) In the BADI implementation create a object for the proxy class.
   2) Call the Execute_Synchronous method.
    You can define a BADI by using SE18 and you can implement it by using SE19.
Sample code...
================================================
METHOD ZIF_EX_VBADI~CONVERTUPPER.
DATA: OBJ TYPE REF TO ZTESTCLASS.
DATA: IT_DATA TYPE ZIN_MT,
            IT_RES   TYPE ZOUT_MT,
            SEXCEPTION TYPE REF TO CX_AI_SYSTEM_FAULT.
TRY.
      CREATE OBJECT OBJ
         EXPORTING
             LOGICAL_PORT_NAME = 'TESTPORT'.
CATCH CX_AI_SYSTEM_FAULT INTO SEXCEPTION.
ENDTRY.
ENDMETHOD.
================================================
Thanks,
Vivek LR

Hello. How to download to the PC photos from icloud ? please help

Hello. How to download to the PC photos from icloud ? please help

Hi Sebnem Turksoy,
Thanks for visiting Apple Support Communities.
If you would like to sync your iCloud photo stream to your PC, you can set up iCloud using these steps:
Set up My Photo Stream
Your new photos appear automatically on the iOS devices, computers, and Apple TV you set up with My Photo Stream, no matter which iOS device or computer you use to take or import new photos. For system requirements, see the Apple Support article iCloud: System requirements.
On a Windows computer
Install the iCloud Control Panel if it isn’t already installed on your computer.
Open the iCloud Control Panel, then turn on Photos.My Photo Stream is set up by default. To turn it off, click Options, then turn off My Photo Stream.
To change the iCloud Photos location on your computer, click Options. Click Change to choose a folder, then click OK.
Click Apply.
You can find these steps in the iCloud help pages:
http://help.apple.com/icloud/#/mmf1896412ec
Best,
Jeremy

ABAP Proxy generation from JAVA

Hi,
Is it possible to generate ABAP proxy classes from JAVA?
If possible then how do we call them during runtime from JAVA?
Here is what I am trying to do.
I have XSD ( Open Travel Standards schemas). I want to generate ABAP proxy classes for these XSDs.
So that I can call these ABAP proxy classes from JAVA during runtime. Real implementation of these methods will be implemented in ABAP.
Thanks,
Amara.

hi amara,
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/3e/e3fb40f17af66fe10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
let me know am i reach u r point
bvr

How to create a abap proxy in sproxy netweaver 7.01

sproxy of nw 7.01 is completely different from previous version.For example in prev. versions there is message interface (inbound) (outbound) ...
but in 7.01 , i cannot find how to create an abap proxy class , there is only display proxy in context menu in all segments.(like service interface)
how can i create proxy ?
thanks a lot

In help sap.con says that
Expand the Service Interfaces node.
Select the outbound service interface.
Open the context menu and choose Create.
but there is no outbound service interface under service interface node
what can i do?
thanks a lot..

How to call a custom controller method from view

Hi,
I ve created a simple web service and consumed it in a model. Mapped the input & output parameters to custom controller context which in turn mapped to component controller's context which in turn to view's contexts.
How to call a custom controller method from view?
Please explain the syntax.
Regards,
Manoj.

Hi Patralekha,
Give some idea for the below scenario:
I ve created a simple web service and consumed it in a model. What I did was
1) for the input parameters, mapped the node from view->custom controller->model
2)for the output parameter, mapping from model->custom controller->view.
It works fine.
But I don't want to access model nodes directly, rather I want to set the input param in somewhere else (like custom controller) before calling the appropriate method, same for the response also.
Share me your thoughts.
Regards,
Manoj.

Client Proxy : How to Call Outbound Generated Proxy in ABAP report ?

Dear SDNrs.
I have already created a Scenario for Client/ Outbound Proxy in XI .
I have already Generated Client/ Outbound Proxy in ECC .
Now Question is How to call this generated Proxy in report ?
Please Guide ..... I dont have any idea ...
1. before calling any proxy in report what information needs to collect from generated Proxy ?
2. How to call this generated Proxy in report ?
Regards
Prabhat Sharma.

Hi Prabhat
You have to use your knowledge about ABAP OO for this.
It's simple. You created your Proxy Object throught SPROXY transaction, right? Now, you have to instance your class (information avaliable in SPROXY-> Proxy Objetc -> Class Name) and to use the method displayed there.
Follow an example:
DATA: wa_backfeed      TYPE zibrsapglbackfeed_sapgl,
           wa_output            TYPE zibrsapglrequest,
           lo_clientproxy       TYPE REF TO zibrco_sapgl_out,
           lo_sys_exception TYPE REF TO cx_ai_system_fault.
TRY.
      CREATE OBJECT lo_clientproxy.
      CALL METHOD lo_clientproxy->sapgl_out
        EXPORTING
          output = wa_output.
    CATCH cx_ai_system_fault INTO lo_sys_exception.
               lo_sys_exception->if_message~get_text( ).
ENDTRY.

How to use CL_PROXY_BASIS instead of CL_PROXY_CLIENT your ABAP Proxy class?

Hello experts,
I have a scenario where a new basis release was done in my development and testing SAP boxes (Basis Release 710 I believe) which means from then on when generating an ABAP Proxy class the inheriting class will be used is CL_PROXY_CLIENT as opposed to the previous CL_PROXY_BASIS.
This causes a problem though because the target date for the project, which uses this ABAP proxy, is supposed to be in the production system before the date when the basis release will be done in the production system. Obviously this will cause delays in my project since if I were to move my objects to production before the basis release a dump/syntax error will occur in production because the class CL_PROXY_CLIENT is not expected be production yet.
The next plan is to try to use CL_PROXY_BASIS instead of CL_PROXY_CLIENT, by editing my ABAP Proxy Class be force. My question is, what steps do I need to take so that I can change these classes so CL_PROXY_BASIS will be referenced/used instead of CL_PROXY_CLIENT ?
I hope to hear from all of you soon.
Regards

>
Rich Heilman wrote:
> Bad idea. Your dev and prod boxes should be at the same basis level at all times.
>
Which release and SP level are you still on?

How can we call a OSB proxy service from a BPEL process?

Hi,
I want to call a OSB proxy service from a BPEL process. Can you please explain me the procedure?

Get the wsdl of the OSB proxy service and create webservice parnerlink in BPEL based on this wsdl to invoke the service
To form the wsdl url, copy the Endpoint URI configured to the proxy service(just click on the proxy service in the console) from the sbconsole - /ATHGPUM_GlidePathService/ProxyService/ATHGPUM_GlidePathProxyService
Pre append <<protocol://OSB Hostname:OSB Port>> - http://localhost:8000/ and post append with ?WSDL
The final WSDL url look like - http://localhost:8000/ATHGPUM_GlidePathService/ProxyService/ATHGPUM_GlidePathProxyService?WSDL
Regards
Albin I

ABAP proxy class - data structure

I generated a ABAP Proxy Class and the data structure I want to use is put automatically under item structure which has 0...unbounded type.
1. How can I get rid of this item structure as it will create another unnecessary level for my mapping
2. If my source structure has only 3 level, and the target structure has more than 3 (including item), how to map it?
e.g.
Source structure: Level 1(occurrence 1) > Level 2(1)> Level 3(0..1)
Target structure: Level 1(1])--> Level 2(0...1) --> item (0..unbounded) ---> Level 4(0..1)
I need to map level 3 from my source to level 4 in target, but it didn't seem to work.
Thanks.

--->1. How can I get rid of this item structure as it will create another unnecessary level for my mapping
You can delete the proxy at Application Server.....make necessary changes at XI Message Interface and again generate the proxy...
-->Source structure: Level 1(occurrence 1) > Level 2(1)> Level 3(0..1)
Target structure: Level 1(1])--> Level 2(0...1) --> item (0..unbounded) ---> Level 4(0..1)
For this you need to make use of context change features of XI Mapping.
Regards,

How to call an external web service from OIM?

Hi,
I have a question on how to call an external web service from OIM within e.g. creating user process? How should it be done; through adapter and task in the process?
Any recomendations?
Thanks in advance!

it is not clear to me if you are having problems with calling java code from OIM or if the problem is the web service API.
Lets do some divide and conquer:
Can you create a simple java class that just writes a couple of lines to the log? Please attach this code to the OIM task and make sure it runs.
Once this works we can start looking at the web service call.
Best regards
/Martin

Calling Custom XSLT java class from BPEL in SOA Suite 11g

Hi All,
Morning...need some help with this issue...we are currently on SOA Suite 11g (11.1.1.4) version.
Earlier while we were on SOA Suite version 10g (10.1.3.3) we were calling the custom java classes from the xsl mapping for complex transformation and for this we were placing the .class file as .jar file at the location mentioned here $OC4J_HOME/j2ee/home/applib directory and then mentioning the namespace as http://www.oracle.com/XSL/Transform/java/{$classname$} in the XSLT mapping file.
Now in SOA Suite 11g if we need to retain similar functionality for external custom java calls could someone please help us where do we need to put the .jar file now ..
exactly at which directory location/path and on which instance/server (application server instance or middle tier instance ) we need to put this .jar file
Currently we are stuck and need some help with this.
With thanks & Regards

Hi Eric & Anuj,
Thanks for replying , sorry for checking on this now...
here at this path /opt101/app/oracle/SOAD/SOA11gR1/fmw/Oracle_SOA1/soa/modules/oracle.soa.ext_11.1.1
we got the ora.soa.ext.jar file and extracted it to get the MANIFEST.mf file ..have mentioned below.
Now if we need to link our custom .jar file named customfunctions.jar so we need to mention it as below is this correct :
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.1
Created-By: 17.0-b17 (Sun Microsystems Inc.)
Implementation-Vendor: Oracle
Implementation-Title: Oracle SOA EXT
Implementation-Version: 11.1.1
Product-Name: Oracle SOA EXT
Product-Version: 11.1.1.4.0
Specification-Version: 11.1.1
Extension-Name: oracle.soa.ext
Class-Path: classes/
Class-Path:customfunctions.jar classes/ -- is this the way to mention (means we need to add this additional line or we need to add to the existing line at Class-Path: classes/)
2.
Eric the Alternative method mentioned in your update :
Open a command prompt and change the current directory to the oracle.soa.ext_11.1.1 directory ,
then execute the build.xml file in the oracle.soa.ext_11.1.1 folder using Ant
Now could someone please guide us regards this ANT means how does it work and its relation to the build.xml file and how do we check whether we have ANT utility available or not..
not much conversant with this ANT hence asking here..would lookout for your reply
thank you

Calling a object of class from other class's function with in a package

Hello Sir,
I have a package.package have two classes.I want to use object of one class in function of another class of this same package.
Like that:
one.java
package co;
public class one
private String aa="Vijay"; //something like
}main.java:
package co;
import java.util.Stack;
public class main extends Stack
public void show(one obj)
push(obj);
public static void main(String args[])
main oo=new main();
}when I compile main class, Its not compile.
Its give error.can not resolve symbol:
symbol: class one
location: class co.main
public void show(one obj)
^Please help How that compile "Calling a object of class from other class's function with in a package" beacuse I want to use this funda in an application

kumar.vijaydahiya wrote:
.It is set in environment variable.path=C:\bea\jdk141_02\bin;.,C:\oraclexe\app\oracle\product\10.2.0\server\bin;. command is:
c:\Core\co\javac one.javaIts compiled already.
c:\Core\co\javac main.javaBut it give error.
Both java classes in co package.Okay, open a command prompt and execute these two commands:
// to compile both classes:
javac -cp c:\Core c:\Core\co\*.java
// to run your main-class:
java -cp c:\Core co.main

Recursion in abap proxy class

Hi experts.
I create an abap proxy class via SE80, because we won't use XI. After import a local WSDL file, I generated the proxy class. But my problem is I can't active it. I see there are many errors in warings tab, they are 'Item is part of recursion'. Any one knows how to solve these problem?

Hi,
Kindly inspect wsdl and you will find data type which is referring to itself. Such recursion in my knowledge not yet supported. Possible workaround is to download wsdl and modify tags to remove recursive effect (may be create a copy of tag give another name and then refer it as data type).
Regards,
gourav

Error no. SPRX084 when create a ABAP proxy class

Hy Guys,
I create a Web Services on Axis and Tomcat machine, it's in document/literal Style format.
When I try to import WSDL to create an ABAP proxy class, Proxy class generator, returm me an error number SPRX084 having said me that the message, in part TAG on element Attribute, uses a wrong or inexistent element.
I've the same case from "http://www.thomas-bayer.com/axis2/services/BLZService?wsdl".
There's a solution?
Best Regards,
Antonello

i tried with this wsdl (http://www.thomas-bayer.com/axis2/services/BLZService?wsdl) and dont get the error you are mentioning.

How to call a ABAP proxy class from a BADI? Please help!

Similar Messages

Maybe you are looking for