How to call the second mapping in the first mapping fails in the BPM

Hi All,
I have a scenario like this.
There are two mappings. There is a one condition while genearying the root element of the first mapping. If this condition is not satisfies the first mapping will fail. If this mapping fails i want to trigger another mapping.
How to achieve this functionality.
If it is possible with BPM. how to call the second mapping in the BPM.

Hi
you can not create the containter for the synchronous interfaces.
you have to craete the two asysnchronous abstact interfaces .
thenusing those two abstract interfaces you have to define the containers in the BPM.
and you also have to define the interface mapping b/w those two abstract interfaces.
once you define the interface mapping you will be able to select the interface mapping using the transformation step in BPM.
once you select the interface mapping in BPM then you will be able to selece the interfaces
if you still face the problenm please reply me back.
Thanks
Rinku Gangwnau

Similar Messages

HT1800 How can I add a Epson Stylus SX445w to my mac Book Pro this is the second one I've tried and failing miserably...it should be so simple...spoken to the help line at Epson and they say it's down to Apple !! Somebody please help me

How can I add a Epson Stylus SX445w to my Mac Book Pro
This is the second one I've tried and failing miserably...it should be so simple...I've installed poken to the help line at Epson and they say it's down to Apple !! Somebody please help me

Yes I did everything that I was instructed to do!
Cheers
Joyce

How to stop iphone 4s from putting a space after the second digit, when entering a text number from the keypad

How do I stop the iphone 4s from putting a space after the second digit, when entering a text number from the keypad. Entering a text number on the key pad like 61998 comes out on the screen as 61 998 and the sms fails to go.

The space (or lack thereof) should have no effect on whether or not the SMS goes through. The spacing is intended to make it easier for the human eye to comprehend the number. I'd start by resetting the network settings in General>Reset>Reset Network Settings.

I've lost the use of Appleworks in 10.9.2. Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other?

I've lost the use of Appleworks by upgrading to 10.9.2.
Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and few other applications that aren't available on OS 10.9.2.
Any suggestions?
Thank you for your help.

Hello again, WZZZ,
Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
Some thoughts:
• The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
• The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
• If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
So, all in all a good project that got me where I wanted to go. Thank you for your help.
Appreciatively,
wallah

I am using iCal on my iMac, iPad and iPhone using iCloud and when I set the alert for 1 day before and the second alert to 1 hr before, then save the alerts switched. Was is this happening?

I am using iCal on my iMac, iPad and iPhone and when I set the alert for 1 day before and the second alert to 1 hr before, then save the alerts switched. Was is this happening?

http://support.apple.com/kb/he57?viewlocale=de_de
India
(91) 1800 4250 744
www.apple.com/in/support/
hope it helps

Why charged me twice for the same item? They have withdrew money from my bank account for the second time about half an hour later after the transaction was completed leaving me overdrawn.

Why charged me twice for the same item? They have withdrew money from my bank account for the second time about half an hour later after the transaction was completed leaving me overdrawn.

Hi Benjamins,
I've checked your account—you have two ExportPDF subscriptions. One placed on October 20 2013, and the other placed on October 11 of this year. So, you were probably charged the auto renewal for the subscription placed in 2013, and then the new charge for this year's order.
Please Contact Customer Care so that an agent can help get things situated for you. There's no reason to have two subscriptions to the same service, so an agent can help you cancel one, if you'd like.
Best,
Sara

How to install the Thai2Unicode Script, I have tried, but failed. The Thai song is can't read because it shows in unread letters.

how to install the Thai2Unicode Script, I have tried, but failed. The Thai song is can't read because it shows in unread letters.

Hey brightness,
Thanks for the question. After reviewing your post, it sounds like you can't install or uninstall QuickTime. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks for using Apple Support Communities.
Have a nice day,
Mario

My Macbook keeps saying 'The burn to the MATSHITA DVD-R UJ-898 drive failed. The burn failed because of a medium write error.' everytime I try to burn a cd with data on it, it has only just started doing it after 2 years of use, how do I fix it?

My Macbook keeps saying 'The burn to the MATSHITA DVD-R UJ-898 drive failed. The burn failed because of a medium write error.' everytime I try to burn a cd with data on it, it has only just started doing it after 2 years of use, how do I fix it?

Have you tried using a different brand of optical disk? (You don't say whether you are doing CDs or DVDs.) Some are better than others.

HT203421 i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this

i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

When deleting emails i get the following error message at times ...The IMAP command "UID COPY" (to Deleted) failed for the mailbox "INBOX" with server error: Error 9. Server error. Please try again later..

When deleting emails i get the following error message at times ...The IMAP command “UID COPY” (to Deleted) failed for the mailbox “INBOX” with server error: Error 9. Server error. Please try again later..

Please complete or update your system profile so the users here can properly help you.
Which email client are you using?

How to call a method in private section of a class in the public section

Hi Everybody,
i have written a method(meth1) in the private section of a class(C1).
it is as follows
class C1 definition.
private section.
methods: meth1 importing im_dt1 like tp1
                                         im_dt2 like tp2
                                         im_dt3 like tp3
                                         im_dt4 like tp4
                           returning value(re_dt1) like tp5.
endclass.
i have the final data that has to be displayed in internal table re_dt1.
now my question is how to call this method present in private section into public section and display the data present in re_dt1.
Thanks,
learning.abap.

Hi,
what you need is one public method being called at start-of-selection. Within this the private methods have to be called.
The question is, why has the method for reading the database tables to be private? If you have only one private method reading all database tables the public method being called at start-of-selection will only consist of a call-method statement.
This seems to be one call to much.
The logic for reading the different database tables is hidden inside the class anyway.
Is there any further logic reading the different database tables?
Have always all table to be read? If not another approach would be one private method for each database table being called by a public method deciding which table has to be read:
public section.
methods get_data returning value(re_Dt1).
private section.
methods:
get_table_a returning value(im_dt1),
get_table_b returning value(im_dt2),
get_table_c returning value(im_dt3),
get_table_d returning value(im_dt4),
combine_data importing im_dt1
                                im_dt2
                                im_dt3
                                im_dt4
                        returning value(re_dt1).
*- implementation of public method:
method get_data.
data: lt_dt1 ...
           lt_dt2,
           lt_dt3,
           lt_dt4.
* here decide which tables have to be read:
lt_dt1 = get_table_a( ).
lt_dt2 = get_table_b( ).
lt_dt3 = get_table_c( ).
lt_dt4 = get_table_d( ).
re_dt1 = combine_data( i_dt1 = lt_dt1
                                       i_dt2 = lt_dt2
                                       i_dt3 = lt_dt3
                                       i_dt4 = lt_dt4 ).
endmethod.
*- implementation of private methods
method get_table_a.
endmethod.
method get_table_b.
endmethod.
method get_table_c.
endmethod.
method get_table_d.
endmethod.
method combine_data.
endmethod.
Regards
Dirk

Sperat full name by the second capital letter to first and last name

hi guys,
I'm facing a problem in sperating a name like " GeorgeWashington " to be " George Washington" .
I'v told there is a function to make space before the second capital letter.
Please help

Good catch as with any of these they are all at best approximations. If oracle gave us access to non capturing sub expressions and word boundaries (similar to ^ and $ but for words) the accuracy could be improved further with less work on our part.
with t1 as (select 'FredMcDonald' name from dual
union all select 'RonaldMacDonald' from dual
union all select 'JanDeVries' from dual
union all select 'MrZ' from dual
union all select 'MrJohnCEdwardsIII' from dual
union all select 'MrEdAllanLane' name from dual
union all select 'Mr.MacMcPhearson' name from dual
union all select 'Ms.JoanyCunningham-Fonzarelli' name from dual
select rpad('['||
regexp_replace(
regexp_replace(
regexp_replace(
regexp_replace(name,
'([[:alpha:]]|[.])([[:upper:]])','\1 \2'),
'([[:upper:]])([[:upper:]])','\1 \2'),
'((Ma?c)|De) ([A-LN-Z])','\1\3'),
'([IVX]) ?(([IVX]) ?)?(([IVX]) ?)?$','\1\3\5')
||']',40) s
from t1
S
[Fred McDonald]
[Ronald MacDonald]
[Jan DeVries]
[Mr Z]
[Mr John C Edwards III]
[Mr Ed Allan Lane]
[Mr. Mac McPhearson]
[Ms. Joany Cunningham-Fonzarelli]
8 rows selected

How To add a second eSata drive once first drive capacity is reached

What upgrade options are available once an eSata drive recording capacity is reached?
Once an eSata drive connected to CHS 435HDC DVR reaches recording capacity, is there a way for a second external eSata drives to be connected and used as external storage devices without loss of all data on the first eSata drive?
Currently once a second drive is connected and activated on the DVR, all playback access to ALL the data stored on the first eSata drive is lost and cannot be played back once the second drive is ejected from the DVR and the first reinstalled..
Once the first drive is reinstalled the Check Capacity option for the first drive which once showed the drive as full and at maximum capacity before it was ejected and uninstalled, now shows 0% full, and 0 hours usage hours and the drive space 100% available.
These reading are without having reformatted the drive and only selecting the "accept" option once the DVR detected the drive being reinstalled.
The Recording option still will show recorded program listing, but once a recording is selected for playback, no recorded program data appears on the screen nor none of the normal indicators displayed on screen during normal playback does not appear.
This means there is no upgrade path or option available once recording capacity is reached for an eSata extended storage drive, other than losing all 350 hours of recorded program data or deletion of files to free up capacity.
Also there is no warning that once a drive is disconnected from the DVD and another drive is activated all data recorded on the first drive is lost and cannot be played back! The data must be there nut not recognizable by the DVD program even though the data was created on the same DVR and eSata drive.
How can I safely connect a second eSata drive to the DVD and not lose all the recorded data on the first eSata drive?
Thanking you in advance for your help.

phoneb1ll wrote:
How can I safely connect a second eSata drive to the DVD and not lose all the recorded data on the first eSata drive?
Thanking you in advance for your help.
Based on the description of your own observations, you can't. Does some one else know otherwise?

How To : Call External Webservice from BPEL and pass SOAP Message to the WS

Hello All-
Greetings to all BPEL gurus. I am currently facing difficulties in calling an External Webservice from my BPEL Process and passing SOAP Message to it. The details are below:
1. The BPEL process, using database polling feature of DB Adapter, will get the records from the database.
2. Transform the message
3. Call the External Webservice and pass the transformed message as the input to it. However the Webservice expects the BPEL process to send SOAP headers in the input message.
I am struggling on how to put the transformed message within a SOAP envelope in the BPEL process.
If anyone had similar requirements and have successfully been able to send SOAP messages from BPEL process to an external webservice, kindly let me know.
Also if there is some kind of documentation or any link in the forum that I can refer, please let me know that as well.
I am new to Webservice integration using BPEL and would really appreciate your help.
Thanks In Advance
Regards,
Dibya

Hi Dharmendra,
I am trying to send a SOAP message from my BPEL process to a web service. I have a complete SOAP message in a complex variable defined in the wsdl for the partnerlink (web service). My problem is that when I invoke the partnerlink it fails even though the content shown in the BPEL console looks valid.
I have set up obtunnel to see what I am actually sending out from BPEL. You mention that BPEL creates the SOAP envelope automatically.
I think that my problem is a result of this automatic SOAP envelope that BPEL is creating. Do you know if there is a way to turn it off?
This is what I see in the TCP monitor, please note the double SOAP env:Body:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <env:Body> <RCMR_IN000002NR01 xmlns="urn:hl7-org:v3" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsa="http://www.w3.org/2005/08/addressing" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<env:Header>
<wsa:To xmlns:wsa="http://www.w3.org/2005/08/addressing">http://testhost/CCS/Service_Endpoint</wsa:To>
<wsa:From xmlns:wsa="http://www.w3.org/2005/08/addressing">
<wsa:Address>http://localhost/CCS/Service_Endpoint</wsa:Address>
<wsa:Metadata>
<device xmlns:hl7="urn:hl7-org:v3">
</device>
</wsa:Metadata>
</env:Header>
<env:Body>
<RCMR_IN000002NR01>
</RCMR_IN000002NR01>
</env:Body>
</RCMR_IN000002NR01>
</env:Body>
</env:Envelope>
Any help is appreciated.
Regards,
Aagaard
Edited by: Aagaard on Oct 30, 2008 8:59 PM
Should have mentioned. I am using BPEL 10.1.3.4
Edited by: Aagaard on Oct 31, 2008 8:43 AM
I have opened a new thread for this question so as to not confuse the issue more than necessary.
How many SOAP envelopes do you really need?

How/where can i find "user" entity from first cup tutorial in the database

within the first cup java ee tutorial a user entity is crated:
@Entity
public class FirstcupUser implements Serializable { ...in some other code the user is created and inserted?:
@PersistenceContext
private EntityManager em;
FirstcupUser user = new FirstcupUser(date);
em.persist(user);the question is how or where in the database(i don't know the database name, the table name should be user?) i can find the inserted users? within net beans in "services" i can see a db server with a "sample" database - this seems to be a preinstalled example db. but where can i find the db created by the web app i wrote?
thx in advance

Press Option key and select Go > Library in the menu bar. To show that folder, open Terminal and copy:
chflags nohidden ~/Library

TS1398 Had a iPhone 4 for two years without a glitch, got a 5, and it's rubbish, can't get wifi unless I sit next to the router. This is the second iPhone 5 in a week, I took the first one back to Vodaphone!! I'm now about to take this one back, and get 4

What do I do with this rubbish iPhone 5???? Second one in a week that constantly drops wifi!!! Help!!

Hi there,
You may want to take a look at some of the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
-Griff W.

How to call the second mapping in the first mapping fails in the BPM

Similar Messages

Maybe you are looking for