How to call the secured EJB from timer ejb timedout method.

Hi All,
I have a couple of questions on EJB 3.1 Timer Service.
1. How to call the secured EJB (annotated @RolesAllowed) from Timer EJB @Timeout Method?
2. What's the default role/principal with which the Timer @Timeout Method gets called?
Please let me know any info regarding the same.
Thanks,
Suresh

I'd start here:
http://ant.apache.org/manual/index.html
If that doesn't help, go to the table of contents and start poking around. You don't need to read the whole thing front to back, but if you're not willing to spend some time researching and reading, you're not going to get very far.

Similar Messages

  • How to call the RFC's from the third party applications or Non SAP applicat

    Hi,
    For calling RFC's from the wedynpro , SAP has provided the modeling concept.
    In the same way, if i want to access or call the RFC 's from the third applications or Non SAP applications what is the procedure and what is the methodoligy.
    As per my knowledge, we need to expose those RFC's as webservices . Then we must be able to acces in hetrogeous environment from any third party applications..
    Please revert back soon, It is very urgent.
    Regards
    Vijay

    Ayyappa Raj,
    Thanks for the reply.
    Please let me the detailed information for implementing.
    AS you said . I need expose the RFC's as webservice. This point is clear to me.
    2) Use tthe JCo to connect and create client proxy.
    Can u please elabrate the above point?
    If u have any steps created in the document or url to refer. Please forward it to me.
    Please forwar the document to this id "vijay00" in yahoo.
    AS the sdn is not allowing to give  the maill id i have given only the id details in yahoo.
    I am new to this procedure.
    Regards
    Vijay

  • How to call the secured webservice in proxy client ?

    Hi All,
    JDev ver : 11.1.1.5
    I have created a proxy client fro the siebel webservice in model.
    When I try calling the methods in the service. its giving error like this ,
    Exception in thread "main" javax.xml.ws.soap.SOAPFaultException: Unable to process SOAP Header child element 'wsse:Security' with 'mustUnderstand="1"'(SBL-EAI-08000)
         at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:197)
         at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:130)
         at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:125)
         at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
         at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
         at $Proxy32.dgcaCreateAttachement(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    How to set the soap header message username and password ?
    thanks,
    Gopinath

    Hi Juan,
    In the client class I am calling the service like this, Where I am doing wrong ?
    dGCA_spcCreate_spcCase_spcAttachments_Service = new DGCA_spcCreate_spcCase_spcAttachments_Service();
    SecurityPoliciesFeature securityFeatures =
    new SecurityPoliciesFeature(new String[] { "oracle/wss_username_token_client_policy" });
    DGCA_spcCreate_spcCase_spcAttachments dGCA_spcCreate_spcCase_spcAttachments = dGCA_spcCreate_spcCase_spcAttachments_Service.getDGCA_spcCreate_spcCase_spcAttachments(securityFeatures);
    Map<String, Object> reqContext =
    ((BindingProvider)dGCA_spcCreate_spcCase_spcAttachments).getRequestContext();
    reqContext.put(BindingProvider.USERNAME_PROPERTY, "SADMIN");
    reqContext.put(BindingProvider.PASSWORD_PROPERTY, "SADMIN");
    DGCACreateAttachementInput input = new DGCACreateAttachementInput();
    input.setCaseId("");
    input.setFilePath("");
    dGCA_spcCreate_spcCase_spcAttachments.dgcaCreateAttachement(input);
    Regards,
    Gopinath

  • How to recover the security copy from iCloud

    When I set up my new iPhone I couldn't do it with my set up kept on iCloud because the version of IOS  was different,  so I started like new one and then I update the version of IOS.  Now I don't know how to recover my security copy on iCloud.  Could you please help me?

    Go to Settings>General>Reset, tap Erase All Content and Settings, go back through the setup screens on the phone and when given the option, choose Restore from iCloud Backup.

  • How to call the 2 Tcodes from single program.

    Dear Friends,
    I would like to call 2 tcodes form a single program based on some conditions like :
    I have a program ZRR wich is madule pool report with selection screen and screen 100, 200.
    If I excuted tcode ZXX then I need to call the report with selectin screen ( from there with giving some input data I will go to screen 100 ),
    If I excuted tcode ZYY then I need to call the same report skiping the selection screen and need to go directly screen 200.
    Pls help me on this if any bady is faced the similar problem.
    Thanks,
    Sridhar

    hi,
    yes you can do this..
    try this
    create a two screen suppose 9000 and 9001..
    then right click on your program name...
    create a TCODE say TONE..
    in this give the screen number 9000..
    now again right click on the program name
    create a TCODE say Tsecond
    in this give the screen number 9001...
    hope this will help you..
    Regards
    Ritesh J

  • How to call the U.S. from the Maldives?

    I will be in the Maldives for 10 days and want to be able to call the U.S. via a Windows laptop.  What's the best way to do this?  Should I do the pay-as-you-go approach or get a subscription?  If I use the pay-as-you-go approach with Skype credit, can I call a cell phone in the U.S.?  What are the rates?
    Solved!
    Go to Solution.

    bethr524 wrote:
    1. Should I do the pay-as-you-go approach or get a subscription? 
    2. If I use the pay-as-you-go approach with Skype credit, can I call a cell phone in the U.S.? 
    3. What are the rates?
    Hello,
    1. Only you can answer that question. It depends on your call frequency.
    2 . Yes.
    3. http://www.skype.com/en/rates/#FR
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • How can backup the old deta from time machine to OS X LION??

    Hi there,
    I was using MacPro with older snow leopard just now i install OS X LION,before install i backup all deta to time machines about 70GB,now when i connect i dont know how can backup the old deta to OS X LION,but it just backup the recent deta to time machine,pls guide me how i can backup my old deta to my computer??
    Will be much appreciated !!
    Thanks.

    Sorry, but your post is not clear.
    If all you did was upgrade to Lion, there's no reason to do anything.  All your data, etc., should still be on your Mac, just as it was before.
    Please clarify exactly what you did, and what the problem is.

  • How to restore the Main Drive from Time Machine after replacement

    I have a Late 2008 PowerBook Pro. I have a 2TB external drive for Time Machine.
    I replaced the main drive with a 1 TB drive and thought that i could restore from the Time Machine. I have another external drive that has an earlier OS on it. It lets me select the time machine drive but doesn't allow me to restore the main drive.
    I must be missing something because this is exactly why there is a Time Machine.
    Can anybody give me some hints?
    Thank you so much
    Rudolf

    You need to use online recovery to re-install an OS X on the hard drive;
    the utilities to correctly format the hard drive may be accessed there.
    Ideally, you'd have a working copy (clone) to then be able to re-clone
    into a prepared hard drive, for an off-line complete restore to new HDD.
    There are details, right now I'm not able to go into them.
    •OS X: About OS X Recovery - Apple Support
    Good luck & happy computing!

  • Invoke the secured webservice from BPEL in Solaris environment

    Hi All,
    Can any one tell me how to invoke the secured webservice from BPEL in Solaris environment as i am able to invoke the secured web service from BPEL in windows platform(soa suite 10.1.3.4).
    we have applied 10.1.3.4 patch on solaris environment but we are not able to invoke the same.
    Thanks in advance
    Regards,
    Nagaraju .D

    Hi Nagaraju,
    Read your post.We've somewhat the similar problem as yours as we are facing some error while invoking a WS-Security secured web service from our BPEL Process on the windows platform(SOA 10.1.3.3.0).
    For the BPEL process we are following the same steps as given in an AMIS blog : - [http://technology.amis.nl/blog/1607/how-to-call-a-ws-security-secured-web-service-from-oracle-bpel]
    but sttill,after deploying it and passing values in it,we are getting the following error on the console :-
    &ldquo;Header [http://schemas.xmlsoap.org/ws/2004/08/addressing:Action] for ultimate recipient is required but not present in the message&rdquo;
    As you have wriiten that you've already called a secured web service in windows platform ,so if you can please help me out in this issue.
    I've opened a separate thread for this to avoid confusion. :-
    Error while invoking a WS-Security secured web service from Oracle BPEL..
    Thanks,
    Saurabh

  • How do I restore printer preferences from time machine in Mountain Lion?

    Yesterday I deleted all the printers and and after reinstalling the printer drivers from the printer disc, the printer cannot find the software, so how do retore the printer preferences from time machine?

    The printer is a Samsung CLX-3180 series.  I have downloaded the printer drivers from Apple:
    Samsung Printer Drivers v2.5 for OS X
    Then when I go into System preferences to Add the Samsung printer, I get the following message:
    "Can't install the software for the Samsung CLX-3180 Series because it is not currently available from the Software Update server."  Which I don't understand as i have downloaded the new drivers and the CLX-3180 is listed as a covered printer.

  • How to call the Application configuration in run time.

    hi guru,
    i have created two  Application configuraton   and it working fine.
    my question how to call the application configuration in run time.
    Example :
    Based on the user i want to change the Application Configuration.like Super user and Normal user.
    Advance thank's
    Regard's
    Vivekanathan.S

    Hi,
    Please try out this way-
    Have a look at this table -
    WDY_CONF_APPLU - (Customizing Data for Web Dynpro Applications).
    after you are done with the configuration--
    Ge the config id for the given application from this table. And depending on the user get an entry from this table and display accordingly.
    Please refer to these links -
    different default layouts for different CONFIG_IDs
    Get WDCONFIGURATIONID
    Regards
    Lekha

  • How to write a procedure to run the call the custom package from backend

    Hi All
    Oracle 10g
    Oracle Apps R12
    I am working with oracle order management here we have a customize Package called (Pick Release).Due to some problem we have running this concurrent program by manually giving Route_id as parameter. The route_id is taken from the route Table. By using this query
    select distinct route_id from route@DB_LINK_APPS_TO_ROADSHOW
    where trunc(route_date) = trunc (sysdate+2).
    so daily we have nearly 42 routes and we are running this concurrent program manually nearly times.
    so now how to write a procedure for this
    Step 1 Getting the route from route table.( By cursor we can get the route_id Accordingly)
    Step 2 How to trigger the custom package from back end and execute accordingly to that output of the cursor(route_id)
    If the cursor get 40 routes is it then the concurrent program runs 40 times according to that route_id.
    can some could provide the steps to do this
    Thanks & Regards
    Srikkanth.M

    This is about 4 or 5 lines of PL/SQL and the name of the custom package is not provided.
    If you request someone in this forum to do your work for free -because obviously you didn't even try to write it, which must be considered abusing this forum- you must at least provide sufficient info so someone can do it.
    And no, I won't do it for you.
    Sybrand Bakker
    Senior Oracle DBA

  • How can I look up DataSource from one EJB to the other EJB?

    Image that, I have 3 databases:
    DB1
    DB2
    DB3,
    And then, 03 DataSources is deployed in DS EJB, named DataSource1, DataSource2, DataSource3.
    In the other App EJB, I have Connection Management function, as follows:
    public Connection getConnection(databaseKey) {
    if (databaseKey.equals("DB1")){
    connection = remote.lookup("DataSource1");
    }else if (databaseKey.equals("DB2")){
    connection = remote.lookup("DataSource2");
    }else if (databaseKey.equals("DB3")){
    connection = remote.lookup("DataSource3");
    return connection;
    How can I access DataSource 1,2,3 from the other EJB? How to config EJB server for that?
    Thanks in advance!
    Now, I have the other App EJB. Some class will require one of the above DataSource from DS EJB through function getConnection(databaseKey){}

    I strongle suggest you to use a ServiceLocator for this . It will be very easy to identify.Go to the sun home page and look for a servicelocator pattern.You can even directly use that code for you.

  • How to call the RFC from R/3 to SRM, when we use webdynpro abap? (Urgent)

    Hello
    We use SRM Server 5.5 with classic scenario.
    We want to call RFC in R/3 from webdynpro ABAP.
    How can we do that?
    We are developing the web report using webdynpro abap.
    So we need some of R/3 data such like PR(EBAN)and PO(EKKO,EKPO).
    When user choose the search parameter, report diplay the Shopping cart, PR and PO data on webdynpro.  So we call the R/3 RFC to display the PR, PO data.
    But I tired to call the RFC in R/3, We could not call it.
    How to call the RFC from R/3 to SRM, when we use webdynpro abap?
    Thank you,
    Best Regards,
    SH.

    Hi
    <b>Please look at the following threads as well -></b>
    WebDynpro in SRM
    BAPI's /RFC's in SRM
    BAPI to Change Shopping Cart by RFC
    SRM60 and webdynpro
    Webdynpro Services Exception
    WebDynpro using BAPI has an error
    SRM60 and webdynpro...
    <b>SAP uses META Function modules in SRM to get data from R/3 back-end.</b>
    <u>For getting Purchase requistion data, use the function modules -></u>
    META_REQUISITION_CHANGE        Change purchase requisition              
    META_REQUISITION_CREATE        Create Requisition                       
    META_REQUISITION_DELETE        Delete/close purchase requisition        
    META_REQUISITION_GETDETAIL     Display requisition details              
    META_REQUISITION_GETITEMS      Display requisition items                
    META_REQUISITION_GETRELINFO    Get Releasease Info for requisitions
    <u>For getting Purchase order data, use the function modules -></u>
    META_PO_CREATE                 Create purchase order                    
    META_PO_DELETE                 Delete reservation                       
    META_PO_GETDETAIL              Display purchase order details           
    META_PO_GETITEMS               Display purchase order items             
    META_PO_GETRELINFO             Display purchase order release information
    Hope this will definitely help. Do let me know.
    Regards
    - Atul

  • How can i remove secure files from the trash? I tried click away the secure notification in info, but still i cann't remove them. Is there a buttoncombination to use?

    How can i remove secure files from the trash? I tried click away the secure notification in info, but still i cann't remove them. Is there a buttoncombination to use?

    If you are unable to empty the trash, try holding the Option key while selecting Empty Trash.
    Otherwise, some steps in the following link may help you.
    http://support.apple.com/kb/ht1526

Maybe you are looking for