How to call used WD Comp attributes

Hi experts,
please help me.
dc1:
view 1;
user submits the data
dc2:
view 2
here  i have to call the data submitted by the user in dc1,view1.
i have made the required attributes of dc1  available in interface controller.
and added the same interface controller under used WD copm of dc2.
and now i need the code for calling the attributes in the view 2 of dc2.
can we directly call them or we have make any context mapping ?
thanks in advance.

Hi,
i am not understand you are req. you are asking communicate between two DC's
or
Comminicate between two Components with in DC.. Give me full information..
any way..Please look at  this documents
[this is having communication between two DCu2019s|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0ae5f90-1679-2c10-4183-8c64cf932088?QuickLink=index&overridelayout=true] and [ this is having communicate between two Components with in DC|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60132577-7801-2b10-c9b1-b13b2f78f23b]
Hope this is help full for u
Regards
Vijay
Edited by: VijaySAPEP on Nov 7, 2011 2:13 PM
Edited by: VijaySAPEP on Nov 7, 2011 2:15 PM

Similar Messages

  • Comp. hard drive crash-How to start using new comp. w/o losing ipod data

    I had a hard drive crash on my old laptop. Unfortunately, I didn't have any backup of any of my iPod data. I had purchased 2 videos and 3 songs. Not a huge loss there, but I also had imported about 150 CDs that I don't care to burn again.
    Ideally, I'd like to get my new laptop loaded with all the data from my iPod, but I've heard I can't do that. At a minimum, I'd like to get my iPod synching with my iTunes library on the new laptop without losing all the data I've already placed on it.
    Each time I try and switch back to automatic, it tells me that it will replace all the data on my laptop.
    Any advice on how to proceed, and any way to get the data back on my laptop's iTunes library from my iPod?
    5th gen iPod using iTunes 6.0.1.3 on Windows 2000
    Thanks.

    Gordon,
    There's a solution to your problem but first it's time for a little lecture. (If it makes you feel any better, I don't like this any more than you do.)
    I hope you take this as an opportunity to learn a very important lesson: Back up your iTunes library as soon as you can after resolving this situation because right now you are only one glitch of your iPod away from losing your music entirely.
    Many people come to the Discussions having lost their music in just such situations and, believe me, it's not a happy time for anyone.
    If you place any importance on your playlists and the data they depend on, you will want to include your iTunes Library files in your back-up regimen as well.
    Anyways, that's the lecture. The answer to your problem should be found in this post:
    http://discussions.apple.com/message.jspa?messageID=797432#797432
    Good Luck! But once your music is back on your computer, remember:
    Your music is valuable - please back it up!

  • Error occurred in deployment step 'Add Solution': A feature with ID '' has already been installed in this farm. Use the force attribute to explicitly re-install the feature.

    Hi I am getting the error
    Error occurred in deployment step 'Add Solution': A feature with ID 10495515-2482-41fd-98eb-3c87f739f54b has already been installed in this farm.  Use the force attribute to explicitly re-install the feature.
    when trying to deploy web parts
    question 1 - how do i use the force attribute when deploying from visual studio
    question 2 - am i deplying it to the right place, if i deply it to the
    url:port that points to my central admin tool it deploys but i cant seem to see it in any of my webs in my site collection, if i deploy it to the
    url:port that points to my site collection I get this error.
    im new to all this by the way :)
    thanks in advance

    If you are deploying from Visual Studio then please follow this post:
    http://sharepointfordeveloper.blogspot.com/2014/03/solved-visual-studio-issue-error.html
    Open the visual Studio and navigate to the feature XML file and add the bellow attribute.
    AlwaysForceInstall="TRUE"
    The <FeatureName>.Template.Xml output would be some think link this.
    <?xml
    version="1.0"
    encoding="utf-8"
    ?><Feature
    xmlns="http://schemas.microsoft.com/sharepoint/"
    AlwaysForceInstall="TRUE"></Feature>

  • How to call Subroutines,Standard Text  & using Internal Table in SmartForm

    Hi all,
    need help in the following areas.Its very urgent!
    1.How to CAll Subroutines in Smart Forms
    2.How to CAll Standard Text in Smart Forms
    Situation:
    We have an Internal Table T_SALES with all the data which am going to display in the smartform,How to retrive data from an internal table in Smart forms
    Any Help in this direction would be highly appreciated.
    Regards
    Ramu

    Hi,
      When you are using quantity or currency fields, you have to mentiong the reference fileds in a tab called CURRENCY/QUANTITY FILEDS in the GLOBAL DATA node.
    Specifying a Currency or Quantity Reference
    Use
    In the ABAP Dictionary, you can assign a currency or quantity field to a table field. In the output of these fields, the system can then insert the relevant currency or unit:
    ·        If the value field is in the same table as the corresponding currency or quantity field, the system recognizes the reference automatically, and formats the value field according to the currency or unit in the assigned field.
    ·        If the value field is in a different table from the currency or quantity field, the system cannot recognize this reference automatically.
    In the second case, you must indicate this reference to the system in the form, to ensure that the value field is formatted correctly.
    Procedure
    You want to assign a currency or quantity field in one table (for example, CURTAB) to a value field in another table (for example, VALTAB).
           1.      Create the reference to the currency field by entering the following values:
    -         Field Name: VALTAB-VALUE, if this is the value field of VALTAB that you want to display.
    -         Reference Field: CURTAB-CURRENCY, which is the currency field of CURTAB.
           2.      Under Data Type, specify whether the data type is a currency or quantity.
    Result
    In the output of the PDF-based print form, the system formats the value field VALTAB-VALUE according to the assigned value in the currency or quantity field of the global variable CURTAB-CURRENCY.
    Thanks and Regards,
    Bharat Kumar Reddy.V
    Message was Added by: Bharat Reddy V
    Message was Added by: Bharat Reddy V

  • How do I use my iPhone 4 to make calls when it is in the Dock?

    Hi,
    This might sound silly but how does one use the phone to make calls when it is in the dock?  Is there such a thing as an on-screen dialler or some such device to help dial the number.  I just have the headphone and mic jack - that is fine.  Just need a dialler. Thanks.
    Rams

    If you're using a G3, you can't.
    If you're using a G4 or G5, check sites such as Amazon or eBay for a Mac OS X 10.5 DVD.
    If you're using an Intel Mac, skip 10.5 and buy 10.6 from the online Apple Store.
    (73452)

  • I recently purchase an ipad2.  I also have a mac laptop.  Now, when I facetime call using my iphone to my ipad2 or mac, it states busy.  how can i fix this problem?  I have the same apple id e mail for both ipad2 and mac.  it might be getting confuse now.

    I recently purchase an ipad2.  I also have a mac laptop.  Now, when I facetime call using my iphone to my ipad2 or mac, it states busy.  how can i fix this problem?  I have the same apple id e mail for both ipad2 and mac.  it might be getting confuse now.  I want to be able to face time also using my ipad2 to my laptop especially if one of the members of the family is traveling.  Thanks.

    thanks.  your answer was correct, clearer.  I have another question, maybe you can answer.  I just purchase my ipad2 2 days ago.  yesterday, there was a sound.  today there is no sound.  there is a sound only in movies and you tube and music.  but no sound on all apps and keyboards.  I look it up and seems like ther are few that have this problem.  I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that.  I tried rebooting it and still won't work.  Should I just restore it?

  • How do I use tether with droid ultra, keep getting message to call verizon. Do Verizon charge or have to somehow change my account?

    How do I use tether with droid ultra, keep getting message to call verizon. Do Verizon charge or have to somehow change my account?

    Verizon Wireless Customer Support wrote:
    Hi there JByrd,
    Let's take a closer look into this. What plan are you currently on? If you are on the More Everything plan, then you shouldn't have to do anything additional. If you are on the Nationwide plan it is an additional $20 a month for 2 GB of data. Let us know what plan you have. Thanks!
    ErinW_VZW
    Follow us on Twitter @VZWSupport
    Hey Erin how about you confirm to Elector and others that you HAVE to pay for tethering on Nationwide plans and that if you are using a 3rd tethering app to bypass paying you are violating the terms of service. They don't seem to believe me.

  • Can you see how many calls are waiting in a queue using Supervisor.

    Is there a way to see how many calls are sitting in a particular queue using supervisor or is there and additional software or hardware i need to use or purchase?
    I am using  Contact Center - 5.0(2)SR01_Build053

    Do you see any CSQs listed in the upper left box in the Supervisor?
    If so, when you click on one or the top-level tree item you should see stats relating to CSQs to the right. You may have to scroll that window accross so see some stats.
    Regards
    Aaron

  • How to call specific view of used component

    Hi All,
    I have the following problem:
    I have component 1 which have two views: 1A and 1B. They are included in one window. Default view is 1A.
      Navigation between view 1A and 1B it made with buttons and plugs ("go to 1A", "go to 1B").
    I have main component 2 which uses component 1 (used component). Component 2 has view 2A and 2B. I have button "Z" in view 2A which calls method of component 1 and navigates to view 2B (where used component 1 is embedded).
    First time I press button I navigate to view 1A, its correct. Then I navigate to view 1B (within used component 1).
    when I go back (in main component 2) and press button "Z" again, the used component 1 is open with view 1B, not 1A (which is default). That is, used component 1 remember which view the navigation stayed on.
    I nee to always see view 1A first when I navigate with button "Z" (open used component).
    How I can do that?

    hi ,
    u must be using component usage ..
    in ur component2 , place the view 1B of ur used component in separate window
    pls refer this thread as well :
    How to call a Particular View from a View of Current Component
    regards,
    amit

  • How to call web service using J2SE 1.3?

    Dear All,
    i have developed a web service by jdev 10.1.3 (JAX-RPC with web service security
    enabled).
    i generate the ws proxy (jdev 10.1.3) and run it with wsclient_extended.jar (required JDK 1.4.1 or above??).
    but one of my client say he has to use J2SE 1.3.x (as OS=AIX 4.3 that without J2SE
    1.4.x ), could anyone tell me how can generate ws proxy (with supporting
    library) for jdk 1.3.x?
    if oracle don't have such library / tools, any third party tools / library available?
    thank you.
    lsp

    I'm found answer:
    Java and SAP Portal blog: How to call web service from java code example

  • How to call text file using Script in Data Integrator

    Dear All,
    Can any one assit me in how to call a text file using script with the help of Data Integrator.
    and one question ?
    M having 32 csv files i want to club thos 32 csv files into one table with the help of Data Integrator, can
    any one assist me.

    mary,
    since you knew the file name ,when clicked in name send to server,read the file and write to servlet outputstream.
    I think this would help you.
    If anything wrong in mycode ..forums will help you further
    BufferedInputStream bis=null;
    BufferedOutputStream bos=null;
    int bytesRead=0;
    byte buff[]=new byte[1024];
    File f=new File(test.txt);
    try{
         bis= new BufferedInputStream(new FileInputStream(f));
         bytesRead=bis.read(buff,0,buff.length);
         if(bytesRead!=-1){
              // create a BufferedOutputStream from ServletOutputStream
              bos=new BufferedInputStream(response.getOutputStream());
              do{
                   bos.write(buff,0,bytesRead);
              }while((bytesRead=bis.read(buff,0,buff.length))!=-1)
    }catch(Exception e){
         ////error handling
         }

  • How to call BSP based iview using Parameters

    Hi,
       i developed one BSP application which takes 2 input parameters 1. Document No 2. Item No.
       I created a iView based on this BSP Application. I would like to call this iView by hardcoding input parameters.
       Input: Document No, Item and Submit button. output displays some text based on input. which is working fine, No issues.
    Now, i developed a iViews using these BSP application. If i call iViews, again no Issues. Which works great, we need to enter input manally.
    I would like to call my iViews with document no = '0004000000' , Item No = '000001' and Submit = 'SET'.  Which directly should display the data for above document item.
    that means iView URL + Document = '0000400000' & Item = '000001' & submit = 'SET'.
    how to call Parametrized iViews???
    I'm talking about Application Parameters in documentation (http://help.sap.com/saphelp_nw04/Helpdata/EN/88/266a3e54a2e946e10000000a114084/content.htm).
    ApplicationParameter
    You can enter parameter values for certain screen fields for displaying a SAP transaction here.
    This field is optional.
    The parameter values are specified with the following syntax:
    <Screen_field1>=<Parameter1>
    &<Screen_field2>=<Parameter2>
    &<...>=<...>,...
    Thanks,
    Ben.
    Edited by: Nagesh Ganisetti on Jan 29, 2009 9:18 AM

    I want to pass values dynamically? How to pass values dynamically using URL???
    assume my BSP URL wiht parameters:
    http://nwd2bw1.corp.analog.com:8001/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sap/zzsdpra123/start.htm?gv_doc=0040013811&gv_item=000001  WORKING GREAT!!!
    Developed an iView using ZZPRA123 BSP application in portal without APPLICATION PARAMETERS.
    http://nwd2bw1.corp.analog.com:50100/irj/servlet/prt/portal/prtmode/preview/prtroot/pcd!3aportalcontent!2fcom.analog.analog!2fcom.analog.SD_BI_REPORTS!2fcom.analog.SD_iviews!2fcom.analog.z_quote_text?sap-config-mode=true&_gv_doc%3d0040013811&gv_item%3d000001 NOT WORKING.
    Simple BSP application: ON INITIALIZATION Method
    event handler for data retrieval
    data: gv_name type thead-tdname.
    data: lt_line1 type standard table of tline,
          lt_line2 type standard table of tline,
          lt_line3 type standard table of tline,
          lt_line4 type standard table of tline.
    data: l_rfcwa type rfcdest.
    data: event type ref to cl_htmlb_event,
          url type string,
          parameter type string,
          url_page type ref to if_bsp_page.
    l_rfcwa = 'PRD_CLI002'.
    if gv_doc is initial.
    CALL METHOD request->get_form_field
      EXPORTING
        name               = 'gv_doc'
       formfield_encoding = 0
      receiving
        value              = gv_doc.
      endif.
      concatenate gv_doc gv_item into gv_name.
      call function 'ZBI_STNDARD_TEXT'
        destination l_rfcwa
        exporting
          name   = gv_name
        tables
          lines1 = lt_line1
          lines2 = lt_line2
          lines3 = lt_line3
          lines4 = lt_line4.
      gt_line1[] = lt_line1[]. "Internal Header Text
      gt_line2[] = lt_line2[].
      gt_line3[] = lt_line3[].
      gt_line4[] = lt_line4[].
    Layout:
    <%@page language="abap" %>
    <%@extension name="htmlb" prefix="htmlb" %>
    <htmlb:content design="design2003" >
      <htmlb:page title="Quote Texts " >
        <htmlb:form>
          <htmlb:inputField id            = "gv_sid"
                            value         = "<%= gv_doc %>"
                            visible       = "FALSE"
                            submitOnEnter = "TRUE" />
          <htmlb:inputField
                            id            = "gv_itm"
                            value         = "<%= gv_item %>"
                            visible       = "FALSE"
                            submitOnEnter = "TRUE" />
          <htmlb:textView text      = "Quote Texts for <%= gv_doc %> "
                          design    = "HEADER1"
                          layout    = "BLOCK"
                          textColor = "dark blue" />
          <%   if gt_line1 is INITIAL.       %>
          <htmlb:textView text   = "No Internal Header Text Found"
                          design = "HEADER2" />
          <% else. %>
          <htmlb:textView text   = "Internal Header Text"
                          design = "HEADER2" />
          <%   loop at gt_line1 into gs_line.    %>
          <htmlb:textView id     = "textEdit"
                          layout = "BLOCK"
                          text   = "<%= gs_line-tdline %>" />
          <%   endloop.       %>
          <%   ENDIF.       %>
    <%--* External Header text      --%>
          <%   if gt_line2 is INITIAL.       %>
          <htmlb:textView text   = "No External Header Text Found"
                          layout = "BLOCK"
                          design = "HEADER2" />
          <%   else.       %>
          <htmlb:textView text   = "External Header Text"
                          layout = "BLOCK"
                          design = "HEADER2" />
          <%   clear gs_line.       %>
          <%   loop at gt_line2 into gs_line.       %>
          <htmlb:textView id     = "textEdit"
                          layout = "BLOCK"
                          text   = "<%= gs_line-tdline %>" />
          <%   endloop.       %>
          <%   ENDIF.       %>
    <%Internal Item text%>
          <%   if gt_line3 is INITIAL.       %>
          <htmlb:textView text   = "No Internal Item Text Found"
                          layout = "BLOCK"
                          design = "HEADER2" />
          <%   else.       %>
          <htmlb:textView text   = "Internal Item Text"
                          layout = "BLOCK"
                          design = "HEADER2" />
          <%   clear gs_line.       %>
          <%   loop at gt_line3 into gs_line.       %>
          <htmlb:textView id     = "textEdit"
                          layout = "BLOCK"
                          text   = "<%= gs_line-tdline %>" />
          <%   endloop.       %>
          <%   ENDIF.       %>
    <%External Item text%>
          <%   if gt_line4 is INITIAL.       %>
          <htmlb:textView text   = "No External Item Text Found"
                          layout = "BLOCK"
                          design = "HEADER2" />
          <%   else.       %>
          <htmlb:textView text   = "External Item Text"
                          layout = "BLOCK"
                          design = "HEADER2" />
          <%   clear gs_line.       %>
          <%   loop at gt_line4 into gs_line.       %>
          <htmlb:textView id     = "textEdit"
                          layout = "BLOCK"
                          text   = "<%= gs_line-tdline %>" />
          <%   endloop.       %>
          <%   ENDIF.       %>
        </htmlb:form>
      </htmlb:page>
    </htmlb:content>
    Please guide me to call iview using dynamic parameters.
    Thanks,
    Ben.
    Edited by: Nagesh Ganisetti on Feb 2, 2009 8:47 AM
    Edited by: Nagesh Ganisetti on Feb 2, 2009 8:48 AM
    Edited by: Nagesh Ganisetti on Feb 2, 2009 8:49 AM

  • How to call RFC in Async Mode using TCP/IP RFC Destination ?

    Hi experts,
         Can anybody tell me how to call an Async RFC using TCP/IP RFC Destination ?
    Regards,
    Umesh

    Check the link
    http://help.sap.com/saphelp_nw04/helpdata/en/80/09680289c751429ab3b07ad2a61c10/content.htm
    It says
    <b> For asynchronous calls, no connection to external systems is possible (TCP/IP connections in transaction SM59).</b>
    Regards,
    Abhishek

  • How to call the RFC from R/3 to SRM, when we use webdynpro abap? (Urgent)

    Hello
    We use SRM Server 5.5 with classic scenario.
    We want to call RFC in R/3 from webdynpro ABAP.
    How can we do that?
    We are developing the web report using webdynpro abap.
    So we need some of R/3 data such like PR(EBAN)and PO(EKKO,EKPO).
    When user choose the search parameter, report diplay the Shopping cart, PR and PO data on webdynpro.  So we call the R/3 RFC to display the PR, PO data.
    But I tired to call the RFC in R/3, We could not call it.
    How to call the RFC from R/3 to SRM, when we use webdynpro abap?
    Thank you,
    Best Regards,
    SH.

    Hi
    <b>Please look at the following threads as well -></b>
    WebDynpro in SRM
    BAPI's /RFC's in SRM
    BAPI to Change Shopping Cart by RFC
    SRM60 and webdynpro
    Webdynpro Services Exception
    WebDynpro using BAPI has an error
    SRM60 and webdynpro...
    <b>SAP uses META Function modules in SRM to get data from R/3 back-end.</b>
    <u>For getting Purchase requistion data, use the function modules -></u>
    META_REQUISITION_CHANGE        Change purchase requisition              
    META_REQUISITION_CREATE        Create Requisition                       
    META_REQUISITION_DELETE        Delete/close purchase requisition        
    META_REQUISITION_GETDETAIL     Display requisition details              
    META_REQUISITION_GETITEMS      Display requisition items                
    META_REQUISITION_GETRELINFO    Get Releasease Info for requisitions
    <u>For getting Purchase order data, use the function modules -></u>
    META_PO_CREATE                 Create purchase order                    
    META_PO_DELETE                 Delete reservation                       
    META_PO_GETDETAIL              Display purchase order details           
    META_PO_GETITEMS               Display purchase order items             
    META_PO_GETRELINFO             Display purchase order release information
    Hope this will definitely help. Do let me know.
    Regards
    - Atul

  • How to call smartform FM after using SSF_FUNCTION_MODULE_NAME?

    Hi Experts,
    How to call smartform FM after using SSF_FUNCTION_MODULE_NAME?
    I mean, in driver program i called SSF_FUNCTION_MODULE_NAME to get the related FM  for my smart form. after that How do I call it(smartform fm) . I tried to call by pressing PATTERN button in Report. but it is showing FM is not exist error.
    Call function SSF_FUNCTION_MODULE_NAME
    Export
    formname = 'zsmartform'
    import
    fm_name = function_name.
    function_name is stored the corresponding smartform fm. then How do i call it to process my smartform?
    thanks in advance.

    hi,
    Chk this sample.
    DATA: p_output_options TYPE ssfcompop, "occurs 0 with header line
    p_control_parameters TYPE ssfctrlop. "occurs 0 with header line
    p_output_options-TDCOPIES = 3. "number of copies.
    p_output_options-tddest = 'LP01'. "def
    p_control_parameters-no_dialog = 'X'. "no dilog box
    p_control_parameters-preview = 'X'. "no preview
    DATA : v_form_name TYPE rs38l_fnam.
    *---- Function to get the function module name of the    ----
    *---- specified Smart form.                              ----
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
    formname = 'GIVE YOUR SMART FORM NAME'   
    * VARIANT = ' '
    * DIRECT_CALL = ' '
    IMPORTING
    fm_name = v_form_name
    EXCEPTIONS
    no_form = 1
    no_function_module = 2
    OTHERS = 3 .
    *---- Function Module to call the Smart Form          ----
    *step 1 - go to ur smart form
    *step2 - take environment
    *step3-take function module name
    *copy that unique number.
    *step4 -come back to ur driver program.
    *step5 - place ur cursur here. take patter,.give that unique number.
    *at that time u will get the below code.
    *step6 - rename that unique number with 'v_form_name' in the code generated by pattern.
    CALL FUNCTION v_form_name
    EXPORTING
    * ARCHIVE_INDEX =
    * ARCHIVE_PARAMETERS =
    control_parameters = p_control_parameters
    * MAIL_APPL_OBJ =
    * MAIL_RECIPIENT =
    * MAIL_SENDER =
    output_options = p_output_options
    user_settings = ' '
    * ARCHIVE_INDEX_TAB =
    * IMPORTING
    * DOCUMENT_OUTPUT_INFO =
    * JOB_OUTPUT_INFO =
    * JOB_OUTPUT_OPTIONS =
    EXCEPTIONS
    formatting_error = 1
    internal_error = 2
    send_error = 3
    user_canceled = 4
    OTHERS = 5
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    for any clarifiaction pls revert.
    regards,
    Reshma

Maybe you are looking for

  • Problem printing with HP 6310 all-in-one

    Am using XP with printer connected to computer by cable.  I cannot print any documents from word, etc.  But I can print test pages from printer and from control panel.  I've tried reinstalling drivers, but it didn't help.  Would appreciate any sugges

  • GC doesn't seem to work properly with Swing components

    Well, I have a problem, and it's quite a big deal. I don't understand why the java GC refuses to free the memory. I have made a VERY LITTLE example, so that everybody will see what the problem is made with. a frame with 2 buttons. the first one make

  • How to align object in the report layout

    Hello, I find it very difficult to aligin objects in the report editor or in the template editor. I know there are some alignment options, like aligning to the grid or aligning a group of objects, but they seem to work on the bounding rectangle for t

  • Can't boot archlinux

    i'm not able to boot my arch linux and when i power on .. the grub bootloader loads normally but after thet it stays at infinite loop on this screen https://scontent-cdg.xx.fbcdn.net/hphot - e=55B9FA81 the recent changes i made .. i just installed bu

  • Program exited with status value:101

    Hi, Please somebody help me. I'm developing an application, in which I implemented maps, UIImagePicker, and used Sqlite3 for database. My application gets terminated when I run it on iphone(no problem on simulator) with the following message: Program