How to cancel technical completion with FM : BAPI_ALM_ORDER_MAINTAIN ?

hello,
I need to cancel technical completion for an order  with BAPI BAPI_ALM_ORDER_MAINTAIN, How can I call this ? Could you please help me ?
Thanks

Hello,
I've just read this FM, This is for setting technical completion only, not for unsetting this
Thanks

Similar Messages

  • Cancel Technical Completion of a TECO'd service order through program

    Hi All,
    In IW32 transaction for a service order I need to Cancel the Technical Completion.Menu path is
    Order>Functions>Complete-->Cancel Technical Completion. How can I do this through program.I tried the FM status_change_intern. But its not working. Any one please give a solution.
    Thanks,
    Neethu.

    Hi,
    Try with a BDC to cancel it.
    Regards
    Sabu.

  • How to cause a "Completed with errors" map condition?

    Our application testers asked me how to replicate a "Completed with errors" map condition, so they can verify that our application reports and handles this correctly. I've been able to generate "Completed with warnings" (create records with duplicate keys) and "Failed" conditions (drop a source table), but not "Completed with errors". Anyone know of a way to produce this condition?
    Thanks!
    Steve Locke

    Hi Steve
    It depends on your 'Maximum Number of Errors' configuration property. By default this value is 50, so its highly likely you are running set based and you have used the default number of errors (50) and the error count after the run is 1 so you have the status completed with warnings. If you change the maximum number of errors to 0, you will complete with errors if there are any errors at all.
    Cheers
    David

  • How to cancel iMessage completely?

    I'm using an iPhone 4, and I am not aloud to use 3G. Therefor, all iDevice users find me in iMessage and text me in that. I do not recieve texts from any iMessage user until I am in wifi, so how do I just completely 100% unsubscribe or cancel iMessage?

    Here goes:
    First, you need to create a new Apple ID...must be a verified email address. Next, make sure your contacts, calendars & iTunes content are on your computer...remember, we're going "nuclear"...you're gonna lose ALL data on your phone...messages...app data...everything. You won't be restoring from backup. Then, on your phone: turn off FaceTime, iMessage & delete the iCloud account...settings>iCloud>scroll down>delete account. Then: Settings>General>Reset>Erase All Content & Settings. When you go to reactivate/setup again, select "new" device, & use your new Apple for iCloud. Once setup, you can activate FaceTime, but do not turn iMessage on or activate it. Go into Settings>iTunes/App store & use your old ID...if your new ID is shown, tap it, sign out, then sign back in with your old ID. Now, connect to iTunes & sync your contacts & iTunes content back to the phone.
    That should do it.
    Make a full backup before you proceed in case you change your mind or want to go back.

  • How to cancel print job with control panel on HP8610

    Is there a way to cancel a print using the control panel of the HP8610 rather than using task manager?
    This question was solved.
    View Solution.

    Welcome to the forums LucyRicky!
    I understand you are looking to cancel print jobs with your Officejet 8610. I have found 2 guides for you to show you how to cancel them.
    Windows: Cancel printing
    Mac: Archived - Mac OS X: How to Delete Printers and Print Job Lists in the Print Center
    I hope that helps resolve your question.
    Happy Thursday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How to attach Technical doc with PO

    Hi All,
    Is it possible to attach documents with PO. I want to attach some technical documents with PO please guide me how to attach.
    Thanks in advance
    Pavan

    Hi Pavan
    First Save your PO ( ME21N ) and again open with change ( ME22N ) then you can attach document through Service for Object button. Service for Object button available down side of Command screen ( in your PO screen ME22N ) 
    Click your Service Object button -> Create -> Create attachment 
    then select your window directory ( which file you need to attach) select your file Now your system shows message  Service "Create attachment" is started. 
    Save again your PO. You can see (open) your attachment in same field ( Service for Object ) select and Create and check attachment list. You can attach as many document in your PO.
    Regards
    Anjali

  • How to cancel inspection lot with REL status

    Hi Guru's,
                     I am not able to close old process orders becuase of active inspection lots in the system, Error message is  "inspection lot doesnot have necessary data" . I could see there are lot many old inspection lots which are in REL status, I am not able to cance these inspection lots in QA02(option is grayed out) How to cancel these  inspection lots which are in REL status?
    Regards,
    Uday

    Hi,
    check the below links....
    cancel QM inspection lot
    QM - Deletion of inspection lot from qa32
    and it would be better if you post this question in QM forum....
    Thanks
    Kumar

  • How to cancel processed messages with acknowledgement waiting status

    Hi All,
    Messages processed successfully in Integration Server but messages still waiting for acknowledgement. I want to cancel these messages.Will u please let me know how to do delete these messages.I already canceled messages with status to be delivered in Integration Engine and Adapter Engine. But in SXMB_MONI, messages are processed successfully with waiting status.Please suggest how we need to cancel them.
    Please Suggest some possible solution.
    Regards,
    Kanisha Sharma
    Edited by: kanisha on Jul 2, 2010 8:28 AM

    Hi,
    Thanks for your reply.Yes it is an IDOC based scenario. But Idoc is in outbound side. Idoc processed successfully in ERP as well as PI processed successfully to MDM.Messages processed successfully in SXMB_MONI but once imported in MDM IS, then acknowledgement will be send to PI.My issue is:- MDM server is down and i want to cancel these messages.
    Please suggest
    Regards,
    Kanisha Sharma

  • How to cancel the connection with my HK BDS?

    Apperently my Harman Kardon BDS wants to connett my MackBook almost 30 times an hour. This is very anoying and I want to cancel this. Please help!!

    Your iPhone 4 should already be internet ready and you shouldn't need a dongle to use the phone. Depending on who you have your service with this is how they make there money by you using the Internet.. If I may suggest lookinto one of the plans that offers UNLIMITED Call, Text, Data, and everything else the phone is capable of for under $50.00 American there are several out there that offer this plan. T Mobile, Net10 just to name a couple. If your intent is to use a phone that has the capability but is not set up it is cheaper and less headaches in other ways.

  • How to cancel an order with service item - Reg

    Hi,
    We have invoiced an order for one service item later we have cancelled the invoice and order status has become as open.
    We have to cancel that order without deleting it.
    We rejected the line item despite it is showing as open order due for billing. Please let me know How can we cancel the order without deleting it.
    Thanx & Regards,
    Sp.Balaji
    Message was edited by:
            balaji soundarapandian

    Hi Prase,
    Thanks for your reply, Checked the status overview also, it shows item is fully rejected and open for billing.
    While generating billing due list the orders which are rejected by us is also reflecting as due for billing.
    Where as if we are rejecting any deliverable items in order it is not showing as open order.
    Please help.
    Thanks & Regards,
    Sp.Balaji

  • How to cancel  Payment Run with cheque generated

    Hi All,
    We have printed wrong  Invoices.Payment run is being done and cheques are generated .We would like to do Payment run again by correcting our Invoices.Please advise the steps to resolve it
    Thanks in Advance
    Regards,
    Payal Saxena

    Hello,
    Please follow the following process:
    1. Go to TC: FCH8, cancel the payment (here you have to cancel the payment cheque by cheque)
    2. Go to F110>click edit>select Payment>delete output. Again click on edit>select proposal-->delete.
    3. Go to TC: FBRA, here you have to reset the data means after reset the clearing docs cleared items will come into open items.
    Now, you can check the Vendor open items and run F110 with correct data
    Thanks
    Para

  • Function Module for TECO(technically complete) a maintenance work order

    Hi,
    Please let me know if there is any FM for TECO(technically complete) a maintenance work order.
    Regards,
    Vimal

    Is there any BAPI for the same as the FM STATUS_CHANGE_INTERN is doing TECO without considering other statuses which need to be done.
    I do technically complete in IW32 by going to ORDER-FUNCTIONS-Complete-Complete(Technically ). Once done Complete(Technically ) will be inactive and Cancel technical Completion will become active. But when i use this FM it does the teco but when i go to ORDER-FUNCTIONS-Complete-Complete(Technically ) it gives me following status information--System Status TECO is active. Also Complete(Technically ) remains active.
    Please help.
    Regards,
    Vimal
    Edited by: Vimal  kumar on Sep 16, 2008 11:10 AM

  • How to delete a PS network with status 'Technically Completed' (TECO)?

    Dear all,
    We have Webdynpro application, which will create a PS network in background. In the past it was working fine and many PS network  are created. Now we have a scenario where some of the networks which are with status 'Technically Completed' (TECO) needs to be deleted from system. I tried to delete it from CJ20N, but it was not possible as the status is set to TECO. Please let me know how to delete a PS network which is with status 'Technically Completed'  (TECO).
    Thanks in advance.
    Regards,
    Vijay

    The cluster goes out and finds all networks that are available.  This is an automatic process.  As long as there is a network there, it will show it.  If you don't want it to show, disable the interface and it will disappear.
    . : | : . : | : . tim
    Thanks a million Tim! Disabling the correct interface made it disappear!
    Actually, I had disabled the interface before I started this thread. When you posted the suggestion, I went back and looked at the network connections again and found out that I had disabled the wrong interface! My bad!
    However, here is the interesting thing:
    After I disabled the NIC and it disappeared from the FCM I physically disconnected its cable (actually I disconnected all unused / unconfigured NICs) ....then I re-enabled it. Now I see that FCM does NOT pick it up again.
    I think FCM picked up those NICs because at one time I had put that NIC in the production VLAN (from the switch side).
    One observation:
    If you have NICs in a HV machine which are not connected to a switch, they do NOT show up in FCM. Once you connect them to some network, they start showing up. I guess by connecting them to a network, they are able to see NICs in other HV nodes.
    Take a look at this screenshot. I have 6 NICs in there which are disconnected, none show up in FCM
    -Rajeev rajdude.com

  • I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

    I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

    I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
    iPhone 5s, iOS 8.3

  • Recently I have added a new icloud account for my iphone but now my email is hacked and I cant complete the verification process.How to cancel the verification in my phone?  plsz help me.....

    Hi
    Recentky I have added a new icloud account to my iPhone 5s but my email is now hacked! so I can't complete the verification procedures. How to cancel the current verification process????plszz help me...

    Ah thanks Razmee however there is NO option to delete the iCloud account in settings!

Maybe you are looking for